ISO/TR 11688-2:1998
Current
Current
The latest, up-to-date edition.
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
03-09-1998
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DocumentType |
Technical Report
|
| Pages |
46
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 11688-2 : 2004 | Identical |
| NBN EN ISO 11688-2 : 2001 | Identical |
| NEN EN ISO 11688-2 : 2001 | Identical |
| NEN NPR ISO/TR 11688-2 : 1998 | Identical |
| NS EN ISO 11688-2 : 1ED 2001 | Identical |
| I.S. EN ISO 11688-2:2001 | Identical |
| PN EN ISO 11688-2 : 2004 | Identical |
| SN EN ISO 11688-2 : 2001 | Identical |
| UNI EN ISO 11688-2 : 2002 | Identical |
| SS-EN ISO 11688-2 : 2000 | Identical |
| UNE-EN ISO 11688-2:2001 | Identical |
| BS EN ISO 11688-2 : 2001 | Identical |
| EN ISO 11688-2:2000 | Identical |
| DIN 45685-2:1998-11 (Draft) | Identical |
| DIN EN ISO 11688-2:2001-03 | Identical |
| BS EN ISO/TR 11688-2:2001 | Identical |
| DIN 45685-2:1998-11 (Draft) | Corresponds |
| 15/30299134 DC : 0 | BS EN ISO 5395-2:2013/A1 - GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS |
| I.S. EN 16307-6:2014 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: SUPPLEMENTARY REQUIREMENTS FOR BURDEN AND PERSONNEL CARRIERS |
| 16/30339514 DC : 0 | BS EN 17003 - ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
| 14/30245659 DC : 0 | BS EN ISO 4254-14 - AGRICULTURAL MACHINERY - SAFETY - PART 14: BALE WRAPPERS |
| PREN 16307-2 : DRAFT 2017 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED VARIABLE-REACH TRUCKS |
| UNI EN ISO 11148-2 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| PREN 12733 : DRAFT 2016 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| 12/30254912 DC : 0 | BS EN 690 - AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY |
| BS EN 1870-19:2013 | Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws |
| BS EN ISO 11148-11:2011 | Hand-held non-electric power tools. Safety requirements Nibblers and shears |
| 16/30333438 DC : 0 | BS ISO 20297-1 - INDUSTRIAL TRUCKS - LORRY-MOUNTED TRUCKS - PART 1: SAFETY REQUIREMENTS AND VERIFICATION |
| BS EN 14677:2008 | Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel |
| BS EN ISO 23771:2015 | Textile machinery. Guide to the design of textile machinery for reduction of the noise emissions |
| S.R. CEN TR 614-3:2010 | SAFETY OF MACHINERY - PART 3: ERGONOMIC PRINCIPLES FOR THE DESIGN OF MOBILE MACHINERY |
| BS ISO 20474-1:2017 | Earth-moving machinery. Safety General requirements |
| 07/30158774 DC : 0 | BS EN 791 AMD1 - DRILL RIGS - SAFETY |
| DIN EN ISO 11148-9:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) |
| BS EN 15954-2:2013 | Railway applications. Track. Trailers and associated equipment General safety requirements |
| BS ISO 20297-1:2017 | Industrial trucks. Lorry-mounted trucks Safety requirements and verification |
| 09/30203677 DC : 0 | BS ISO 11681-2 - MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE |
| 12/30253910 DC : DRAFT JULY 2012 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES |
| UNE-EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
| I.S. EN 15774:2010 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 8230-1:2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| BS EN 15997:2011 | All terrain vehicles (ATVs - Quads). Safety requirements and test methods |
| PREN 1870-3 : DRAFT 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| 09/30206741 DC : 0 | BS EN 15997 - ALL TERRAIN VEHICLES - REQUIREMENTS AND TEST METHODS |
| DIN EN 16564:2015-04 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| BS EN ISO 11850 : 2011 | MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS |
| DIN EN 15997:2012-10 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 13128:2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| UNE-EN 16851:2017 | Cranes - Light crane systems |
| 04/30123600 DC : DRAFT OCT 2004 | ISO 11681-2 - FORESTRY MACHINERY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE |
| 09/30203674 DC : 0 | BS ISO 11681-1 - MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 1: CHAIN-SAWS FOR FOREST SERVICE |
| BS EN ISO 11148-10:2011 | Hand-held non-electric power tools. Safety requirements Compression power tools |
| I.S. EN 16474:2015 | PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS |
| 15/30281554 DC : 0 | BS ISO 10896-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS |
| ISO 13578:2017 | Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
| 11/30237569 DC : 0 | BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| DIN EN 15954-2:2013-11 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| BS EN 16252:2012 | Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements |
| ISO 10517:2009 | Powered hand-held hedge trimmers Safety |
| I.S. EN 14070:2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| DIN EN 15093:2009-06 | Safety of machinery - Safety requirements for hot flat rolling mills |
| DIN EN ISO 11850:2016-06 | Machinery for forestry - General safety requirements (ISO 11850:2011 + Amd 1:2016) (includes Amendment :2016) |
| I.S. EN 16851:2017 | CRANES - LIGHT CRANE SYSTEMS |
| BS EN 16474:2015 | Plastics and rubber machines. Tyre curing machines. Safety requirements |
| BS EN 15093:2008 | Safety of machinery. Safety requirements for hot flat rolling mills |
| 17/30331349 DC : DRAFT MAY 2017 | BS EN ISO 28139 - EQUIPMENT FOR CROP PROTECTION - KNAPSACK COMBUSTION ENGINE-DRIVEN AIR-BLAST SPRAYERS - SAFETY AND ENVIRONMENTAL REQUIREMENTS AND TEST METHODS |
| 12/30244743 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| BS ISO 10896-2:2016 | Rough-terrain trucks. Safety requirements and verification Slewing trucks |
| 10/30214890 DC : 0 | BS EN ISO 5395-3 - GARDEN EQUIPMENT - SAFETY OF POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS |
| 08/30182206 DC : DRAFT SEP 2008 | BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY |
| PREN 474-1 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 09/30197984 DC : 0 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| I.S. EN ISO 11806-1:2011 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE (ISO 11806-1:2011) |
| 13/30276226 DC : 0 | BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| 09/30202029 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| 07/30163456 DC : 0 | BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 14753:2007 | Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel |
| 10/30185766 DC : 0 | BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| 08/30177210 DC : DRAFT MAY 2008 | BS EN 13021 AMD1 - WINTER SERVICE MACHINES - SAFETY REQUIREMENTS |
| I.S. EN ISO 11148-10:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011) |
| UNI EN 12012-4 : 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
| 08/30173506 DC : DRAFT JAN 2008 | BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| DIN EN 1807-1:2013-06 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| I.S. EN ISO 11148-2:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011) |
| DIN EN 15774:2011-10 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
| PREN 15572 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| ISO 20297-1:2017 | Industrial trucks — Lorry-mounted trucks — Part 1: Safety requirements and verification |
| EN 703:2004+A1:2009 | Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety |
| DIN EN 16486:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| I.S. EN 12649:2008 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| I.S. EN 1012-3:2013 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| ISO 18758-2:2018 | Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements |
| I.S. EN ISO 23771:2015 | TEXTILE MACHINERY - GUIDE TO THE DESIGN OF TEXTILE MACHINERY FOR REDUCTION OF THE NOISE EMISSIONS (ISO 23771:2015) |
| PREN 15163 : DRAFT 2014 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
| I.S. EN ISO 18217:2015 | SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015) |
| I.S. EN 1807-2:2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| ISO 11148-13:2017 | Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools |
| I.S. EN ISO 11148-8:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011) |
| I.S. EN ISO 16092-3:2018 | MACHINE TOOLS SAFETY - PRESSES - PART 3: SAFETY REQUIREMENTS FOR HYDRAULIC PRESSES (ISO 16092-3:2017) |
| I.S. EN 16500:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| I.S. EN 15571:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| I.S. EN 1829-1:2010 | HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES |
| BS EN 15059 : 2009 | SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS |
| UNE-EN 14985:2012 | Cranes - Slewing jib cranes |
| I.S. EN 13000:2010 | Cranes - Mobile cranes |
| DIN EN ISO 5395-2:2014-03 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS (ISO 5395-2:2013 + AMD 1:2016 + AMD 2:2017) |
| ISO 19224:2017 | Continuous surface miners (CSM) — Safety requirements |
| UNE-EN 16307-1:2013 | Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
| 16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| I.S. EN ISO 11850:2011 | MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS (ISO 11850:2011) |
| BS EN 1459-1:2017 | Rough-terrain trucks. Safety requirements and verification Variable-reach trucks |
| I.S. EN 15061:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| UNE-EN 16500:2015 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
| UNE-EN 1459-1:2018 | Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks |
| UNE-EN ISO 19085-1:2018 | Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) |
| 16/30314039 DC : 0 | BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| UNE-EN 15997:2013 | All terrain vehicles (ATVs - Quads) - Safety requirements and test methods |
| EN ISO 4254-1:2015 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
| PREN 16770 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS |
| EN 12013:2018 | Plastics and rubber machines - Internal mixers - Safety requirements |
| DIN EN 12409:2011-12 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| DIN EN ISO 11681-1:2012-05 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) |
| DIN EN 13525:2010-05 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| DIN EN 13355:2010-06 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| DIN EN 1870-16:2013-01 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| DIN EN 13675:2010-10 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010) |
| DIN EN 13019:2009-04 | Machines for road surface cleaning - Safety requirements (includes Amendment A1:2008) |
| DIN EN 500-1:2010-05 | Mobile road construction machinery - Safety - Part 1: Common requirements (includes Amendment A1:2009) |
| DIN EN ISO 11680-1:2012-04 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011) |
| DIN EN 12653:2010-06 | Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements (includes Amendment A2:2009) |
| DIN EN 13418:2013-08 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| DIN EN 792-7:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| DIN EN 1870-3:2015-02 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| I.S. EN 861:2007 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| BS EN 12203 : 2003 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
| BS EN 14018 : 2005 | AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY |
| BS EN ISO 19432:2012 | Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements |
| BS EN 13457 : 2004 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| BS EN 14466 : 2005 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| UNE-EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
| UNE-EN 12159:2013 | Builders hoists for persons and materials with vertically guided cages |
| BS EN 13128 : 2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| BS EN 859 : 2007 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| BS EN 1870-16:2012 | Safety of woodworking machines. Circular sawing machines Double mitre sawing machines for V cutting |
| BS EN 13418:2013 | Plastics and rubber machines. Winding machines for film or sheet. Safety requirements |
| BS EN 13000 : 2010 | CRANES - MOBILE CRANES |
| BS EN ISO 11690-2:1997 | Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control measures |
| BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| BS EN 614-1 : 2006 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| BS EN 12409 : 2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| BS EN 12921-1 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| BS EN ISO 4254-1:2015 | Agricultural machinery. Safety General requirements |
| BS EN 12418 : 2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| BS EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| BS EN 12387 : 2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN 859:2007 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES |
| BS EN 13861:2011 | Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery |
| I.S. EN 14985:2012 | CRANES - SLEWING JIB CRANES |
| I.S. EN 13977:2011 | RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| I.S. EN ISO 11681-2:2011 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011) |
| I.S. EN 14043:2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| I.S. EN 1870-16:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING |
| I.S. EN 14910:2007 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| I.S. EN 12921-1:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| UNI EN 15746-2 : 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| EN 12203:2003+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
| EN 13418:2013 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
| UNI EN 703 : 2010 | AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY |
| EN 1114-1:2011 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
| EN 12418:2000+A1:2009 | Masonry and stone cutting-off machines for job site - Safety |
| EN 12012-4:2006+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators |
| EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| DIN EN 14070:2009-07 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| UNE-EN 972:1999 | TANNERY MACHINES. RECIPROCATING ROLLER MACHINES. SAFETY REQUIREMENTS. |
| EN 12044:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
| EN 12653:1999+A2:2009 | Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements |
| EN 13020:2015 | Road surface treatment machines - Safety requirements |
| EN 12547:2014 | Centrifuges - Common safety requirements |
| EN 13112:2002+A1:2009 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements |
| EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar - Safety requirements |
| EN 12336:2005+A1:2008 | Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements |
| EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| EN 12717:2001+A1:2009 | Safety of machine tools - Drilling machines |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| EN 13114:2002+A1:2009 | Tannery machines - Rotating process vessels - Safety requirements |
| EN 12409:2008+A1:2011 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| EN 13021:2003+A1:2008 | Winter service machines - Safety requirements |
| EN 12921-1:2005+A1:2010 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
| EN 12215:2004+A1:2009 | Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
| EN 13113:2002+A1:2010 | Tannery machines - Roller coating machines - Safety requirements |
| EN 12757-1:2005+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| EN 13355:2004+A1:2009 | Coating plants - Combined booths - Safety requirements |
| EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
| EN 12649:2008+A1:2011 | Concrete compactors and smoothing machines - Safety |
| EN 13457:2004+A1:2010 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements |
| 15/30302620 DC : 0 | BS EN ISO 19085-4 - WOODWORKING MACHINES - SAFETY - PART 4: VERTICAL PANEL CIRCULAR SAWING MACHINES |
| DIN EN ISO 11148-11:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) |
| DIN EN ISO 11148-12:2013-05 | Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
| 05/30105911 DC : DRAFT JUN 2005 | ISO 20966 - AUTOMATIC MILKING SYSTEMS - PERFORMANCE REQUIREMENTS AND TESTING |
| BS EN 691-1:2012 | Safety of woodworking machines Common requirements |
| I.S. EN 16252:2012 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
| 14/30285286 DC : 0 | BS EN 14439 - CRANES - SAFETY - TOWER CRANES |
| 11/30254129 DC : 0 | BS EN 12547 - CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| DIN EN 12012-1:2015-05 (Draft) | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| DIN EN 15955-2:2013-09 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 11/30237566 DC : 0 | BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| BS ISO 18564:2016 | Machinery for forestry. Noise test code |
| UNE-EN 1870-13:2008 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
| BS EN ISO 11148-1:2011 | Hand-held non-electric power tools. Safety requirements Assembly power tools for non-threaded mechanical fasteners |
| 08/30177207 DC : DRAFT MAY 2008 | BS EN 13019 AMD1 - MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS |
| UNE-EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
| UNI EN ISO 10517 : 2014 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| 08/30178810 DC : DRAFT MAY 2008 | BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| DIN EN 16191 E : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| UNI EN 1870-19 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| BS EN 15774:2010 | Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements |
| UNI EN 16500 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| CSA M4254.1 : 2007 | AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 11148-1 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| BS EN 1829-1:2010 | High pressure water jet machines. Safety requirements Machines |
| BS EN ISO 11148-12:2012 | Hand-held non-electric power tools. Safety requirements Circular, oscillating and reciprocating saws |
| 09/30196820 DC : 0 | BS ISO 11850 - MACHINERY FOR FORESTRY - SELF-PROPELLED MACHINERY - SAFETY REQUIREMENTS |
| 17/30341100 DC : 0 | BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS |
| DIN EN 15571:2015-03 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| 04/30106849 DC : DRAFT MAY 2004 | EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| 15/30299138 DC : 0 | BS EN ISO 5395-3:2013/A1 - GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR |
| 16/30322398 DC : 0 | BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS |
| I.S. EN 792-9:2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| 14/30297842 DC : 0 | BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
| 09/30198762 DC : 0 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| BS EN ISO 11806-1:2011 | Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Machines fitted with an integral combustion engine |
| 08/30180312 DC : DRAFT MAR 2008 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| DIN EN 1807-2:2013-06 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013 |
| UNI EN 16191 : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| UNI EN 16228-1 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| 14/30263884 DC : 0 | BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| DD ISO/TS 3691-7:2011 | Industrial trucks. Safety requirements and verification Regional requirements for countries within the European Community |
| 12/30255086 DC : 0 | BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 12151:2007 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| BS EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Common safety requirements |
| UNE-EN 691-1:2013 | Safety of woodworking machines - Part 1: Common requirements |
| 07/30142135 DC : 0 | BS EN 1012-1 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| DIN EN 15949:2012-05 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| BS EN ISO 11148-5:2011 | Hand-held non-electric power tools. Safety requirements Rotary percussive drills |
| 15/30295265 DC : 0 | BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| UNI EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| PREN 1889-1 : DRAFT 2010 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| UNI EN ISO 10821 : 2010 | INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
| 11/30235009 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| UNI EN ISO 11148-5 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| 16/30277014 DC : DRAFT MAR 2016 | BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 11148-6 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
| PREN 12012-1 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS |
| 12/30246642 DC : 0 | BS EN 16307-1 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS |
| BS EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material. Safety requirements |
| 08/30177213 DC : DRAFT JUNE 2008 | BS EN 13524 AMD1 - HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
| 14/30279098 DC : 0 | BS ISO 18564 - MACHINERY FOR FORESTRY - NOISE TEST CODE |
| 12/30270038 DC : 0 | BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| DIN EN 1829-1:2010-05 | High pressure water jet machines - Safety requirements - Part 1: Machines |
| BS EN 16743:2016 | Food processing machinery. Automatic industrial slicing machines. Safety and hygiene requirements |
| BS EN 16486:2014 | Machines for compacting waste materials or recyclable fractions. Compactors. Safety requirements |
| 09/30187371 DC : 0 | BS ISO 11148-1 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| 09/30202532 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| PREN 690 : DRAFT 2012 | AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY |
| 13/30276223 DC : 0 | BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| 09/30183457 DC : 0 | BS EN 13020:2004/A1 - ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| 15/30294711 DC : DRAFT MAY 2015 | BS EN ISO 4254-8 - AGRICULTURAL MACHINERY - SAFETY - PART 8: SOLID FERTILIZER DISTRIBUTORS |
| I.S. EN 16486:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| PREN 15746-2 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| ISO 18564:2016 | Machinery for forestry Noise test code |
| DIN EN 16307-6:2014-07 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: SUPPLEMENTARY REQUIREMENTS FOR BURDEN AND PERSONNEL CARRIERS |
| BS ISO 4254-8:2009 | Agricultural machinery. Safety Solid fertilizer distributors |
| ISO 19085-1:2017 | Woodworking machines Safety Part 1: Common requirements |
| UNI EN 16252 : 2013 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
| UNI EN 16486 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| DIN EN ISO 11148-8:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) |
| PREN 1539 : DRAFT 2012 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| I.S. EN 12999:2011 | CRANES - LOADER CRANES |
| I.S. EN ISO 4254-14:2016 | AGRICULTURAL MACHINERY - SAFETY - PART 14: BALE WRAPPERS (ISO 4254-14:2016) |
| BS EN 16307-1 : 2013 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS |
| BS EN ISO 5395-3 : 2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR (ISO 5395-3:2013) |
| I.S. EN 15746-2:2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| BS EN 15061 : 2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| I.S. EN 15163:2017 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS |
| I.S. EN 15955-2:2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 16564:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| ISO 10896-2:2016 | Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks |
| I.S. EN 691-1:2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| UNI EN 15949 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| DIN EN 12999:2013-02 | CRANES - LOADER CRANES |
| EN 12999:2011+A2:2018 | Cranes - Loader cranes |
| EN ISO 16092-3:2018 | Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) |
| UNI EN 15774 : 2011 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 289 : DRAFT 2012 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12012-1 : 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| I.S. EN 14033-3:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| ISO 20966:2007 | Automatic milking installations — Requirements and testing |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 12215:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 12387:2010-03 | Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements (includes Amendment A1:2009) |
| DIN EN 13114:2010-03 | Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009) |
| DIN EN 13128:2009-09 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| DIN EN 13021:2009-04 | Winter service machines - Safety requirements (includes Amendment A1:2008) |
| DIN EN 12621:2011-07 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
| DIN EN 1870-14:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| DIN EN 12203:2010-07 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009 |
| DIN EN 13112:2011-03 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009) |
| DIN EN 1012-1:2011-02 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
| DIN EN 12301:2015-12 (Draft) | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| DIN EN ISO 4254-1:2016-09 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
| DIN EN 12417:2009-07 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
| DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| DIN EN 1417:2015-03 | Plastics and rubber machines - Two roll mills - Safety requirements; German version EN 1417:2014 |
| DIN EN 1870-13:2013-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| DIN EN 12418:2010-03 | Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009) |
| DIN EN 792-8:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| DIN EN 12159:2013-03 | Builders hoists for persons and materials with vertically guided cages |
| DIN EN 12001:2012-11 | CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| DIN EN 14681:2010-10 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010) |
| DIN EN 14466:2008-09 | FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| DIN EN 15027:2010-03 | Transportable wall saw and wire saw equipment for job site - Safety (includes Amendment A1:2009) |
| DIN EN 14439:2010-03 | Cranes - Safety - Tower cranes (includes Amendment A2:2009) |
| DIN EN 14910:2009-08 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| DIN EN 14656:2010-10 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010) |
| DIN EN 14238:2010-02 | Cranes - Manually controlled load manipulating devices (includes Amendment A1:2009) |
| DIN EN 12044:2010-03 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements (includes Amendment A1:2009) |
| DIN EN 15011:2014-09 | Cranes - Bridge and gantry cranes (includes Amendment A1:2014) |
| BS EN 792-8 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| BS EN 14238 : 2004 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| BS EN 13524 : 2003 | HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
| UNE-EN ISO 11680-1:2012 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011) |
| BS EN 14673 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| BS EN ISO 11680-1:2011 | Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners Machines fitted with an integral combustion engine |
| BS EN 13355 : 2004 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| ISO 11806-1:2011 | Agricultural and forestry machinery Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Part 1: Machines fitted with an integral combustion engine |
| BS EN 12653 : 2000 | FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS |
| BS EN 12757-1 : 2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| UNE-EN 13020:2016 | Road surface treatment machines - Safety requirements |
| UNE-EN 12547:2015 | Centrifuges - Common safety requirements |
| UNE-EN 13418:2013 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
| I.S. EN 12215:2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN 13524:2003 | HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| I.S. EN 12418:2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| I.S. EN 12717:2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| I.S. EN 13114:2002 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| I.S. EN 13862:2002 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| I.S. EN 12203:2003 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
| I.S. EN 14656:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| I.S. EN 1012-1:2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| EN 15746-2:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| I.S. EN ISO 19432:2012 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
| I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| I.S. EN 13113:2002 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 690:2013 | AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY |
| I.S. EN 12757-1:2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| EN 16851:2017 | Cranes - Light crane systems |
| I.S. EN ISO 11680-1:2011 | MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLEMOUNTED POWERED PRUNERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE (ISO 11680-1:2011) |
| I.S. EN 14439:2006 | CRANES - SAFETY - TOWER CRANES |
| I.S. EN 14238:2004 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| DIN EN 13524:2003-10 | HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
| EN 13524:2003+A2:2014 | Highway maintenance machines - Safety requirements |
| I.S. EN ISO 11681-1:2011 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 1: CHAIN-SAWS FOR FOREST SERVICE (ISO 11681-1:2011) |
| I.S. EN 1870-3:2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| I.S. EN 13861:2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| DIN EN 1870-1:1999-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| I.S. EN 614-1:2006 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| EN 16564:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| I.S. EN 12750:2013 | SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| DIN EN 792-7:2002-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| I.S. EN 12409:2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 12044:2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| DIN EN ISO 10517:2014-03 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009 + AMD 1:2013) |
| I.S. EN 12348:2000 | CORE DRILLING MACHINES ON STAND - SAFETY |
| I.S. EN 13418:2013 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| I.S. EN 1114-1:2011 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
| I.S. EN 1870-17:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| I.S. EN 12621:2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| I.S. EN 1915-4:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
| DIN EN 13852-2:2005-03 | Cranes - Offshore cranes - Part 2: Floating cranes |
| I.S. EN 14681:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 13355:2005 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| I.S. EN 1870-14:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| I.S. EN 500-1:2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 930:1998 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 474-12:2006 | EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS |
| I.S. EN 13675:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| I.S. EN 703:2004 | AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY |
| I.S. EN 13985:2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| I.S. EN 1539:2015 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| I.S. EN 1889-1:2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| I.S. EN 931:1998 | FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 201:2009 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 14466:2005 | FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| DIN EN 1539:2016-02 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| I.S. EN 12779:2015 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
| I.S. EN 12653:2000 | FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 15027:2007 | TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
| I.S. EN 14018:2005 | AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY |
| EN 15571:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| I.S. EN 13019:2001 | MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS |
| EN 1829-1:2010 | High pressure water jet machines - Safety requirements - Part 1: Machines |
| DIN EN 792-9:2001-08 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| I.S. EN 14044:2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| I.S. EN 1417:2014 | PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS |
| DIN EN 792-8:2001-08 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| I.S. EN 12159:2012 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| I.S. EN 12547:2014 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| DIN EN ISO 10821:2013-02 | INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009) |
| I.S. EN ISO 4254-1:2015 | AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS (ISO 4254-1:2013) |
| I.S. EN 14673:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| I.S. EN 536:2015 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN 13112:2002 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 972:1998 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 12001:2012 | CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| I.S. EN 12387:2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN 13021:2003 | WINTER SERVICE MACHINES - SAFETY REQUIREMENTS |
| DIN EN 1845:2008-06 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
| I.S. EN 1845:2007 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 1953:2013 | ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN 13457:2004 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 1870-4:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 13204:2016 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| I.S. EN 13020:2015 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| DIN EN 12336:2010-03 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| DIN EN ISO 16093:2017-10 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
| UNI EN 13114 : 2010 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| UNI EN 792-7 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| UNI EN 12387 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN 14017:2005 | AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY |
| DIN EN ISO 11148-3:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012) |
| DIN EN ISO 11148-2:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011) |
| PREN 50223 : DRAFT 2013 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 691-1 : 2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 15571:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines |
| DIN EN 16252:2013-03 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
| BS EN ISO 11148-2:2011 | Hand-held non-electric power tools. Safety requirements Cutting-off and crimping power tools |
| BS EN ISO 11148-3:2012 | Hand-held non-electric power tools. Safety requirements Drills and tappers |
| 11/30215034 DC : DRAFT MAR 2011 | BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| I.S. EN 848-1:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| DIN EN ISO 18217:2015-12 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
| 09/30196811 DC : 0 | BS ISO 11680-1 - MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE |
| 02/540559 DC : DRAFT JULY 2002 | EN 14466 - FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| 08/30183566 DC : DRAFT JUNE 2008 | BS ISO 11148-3 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| I.S. EN 15997:2011 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
| 16/30318928 DC : 0 | BS EN ISO 19085-7 - WOODWORKING MACHINES - SAFETY - PART 7: SURFACE PLANING THICKNESS PLANING COMBINED SURFACE/THICKNESS PLANING MACHINES |
| DIN EN ISO 4254-10:2011-07 | Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009) (includes Corrigendum AC:2010) |
| 09/30187383 DC : 0 | BS ISO 11148-11 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| 15/30296744 DC : 0 | BS EN 12013 - PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| BS EN 1870-18:2013 | Safety of woodworking machines. Circular sawing machines Dimension saws |
| 10/30232428 DC : DRAFT DEC 2010 | BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| 14/30272245 DC : 0 | BS EN ISO 16090-1 - MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS |
| 09/30175681 DC : 0 | BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| DIN EN 14677:2008-11 | SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| 12/30253907 DC : DRAFT JULY 2012 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS |
| DIN EN 15061:2009-05 | Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008) |
| BS EN 12999 : 2011 | CRANES - LOADER CRANES |
| 10/30233212 DC : 0 | BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| PREN 14492-1 : DRAFT 2015 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| 12/30258755 DC : 0 | BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
| BS EN 1807-2:2013 | Safety of woodworking machines. Band sawing machines Log sawing machines |
| 05/30140648 DC : DRAFT OCT 2005 | ISO 8437 - SNOWTHROWERS - SAFETY REQUIREMENTS AND TEST PROCEDURES |
| BS EN 15572:2015 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines |
| 10/30232431 DC : DRAFT DEC 2010 | BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| I.S. EN 1459-1:2017 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
| DIN EN 15059:2015-06 | SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS |
| PREN 13204 : DRAFT 2015 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| UNI EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| DIN EN ISO 16093:2014-03 (Draft) | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
| UNI EN ISO 8230-1 : 2009 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| UNI EN ISO 11148-12 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS |
| 13/30266497 DC : 0 | BS EN ISO 23771 - DESIGN MEASURES FOR REDUCTION OF THE NOISE EMISSIONS FROM TEXTILE MACHINERY |
| 04/30110326 DC : DRAFT APR 2004 | EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| I.S. EN 15949:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| DIN EN 16743:2016-05 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 16191:2014-09 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| I.S. EN 16307-1:2013 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS |
| DIN EN 15094:2009-04 | Safety of machinery - Safety requirements for cold flat rolling mills |
| UNI EN ISO 11148-8 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| 08/30156074 DC : DRAFT APR 2008 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| 08/30174113 DC : DRAFT AUG 2008 | BS EN 1915-4 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
| UNE-EN 16564:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| BS EN 15094:2008 | Safety of machinery. Safety requirements for cold flat rolling mills |
| UNE-EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
| BS EN ISO 5395-2 : 2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS |
| UNI EN 14753 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
| DIN EN 16228-1:2014-10 | Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
| BS EN 1012-3:2013 | Compressors and vacuum pumps. Safety requirements Process compressors |
| UNI EN ISO 4254-10 : 2010 | AGRICULTURAL MACHINERY - SAFETY - PART 10: ROTARY TEDDERS AND RAKES |
| PREN 16191 : DRAFT 2010 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| DIN EN 16474:2015-08 | PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
| ISO 16092-1:2017 | Machine tools safety — Presses — Part 1: General safety requirements |
| UNE-EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| UNE-EN ISO 11806-1:2012 | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) |
| EN 16252:2012 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
| 17/30362886 DC : 0 | BS EN 12609 - TRUCK MIXERS - SAFETY REQUIREMENTS |
| PREN 12779 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| DIN EN 14753:2008-03 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
| ISO 16092-3:2017 | Machine tools safety — Presses — Part 3: Safety requirements for hydraulic presses |
| DIN EN 16851:2015-05 (Draft) | CRANES - LIGHT CRANE SYSTEMS |
| I.S. EN 1807-1:2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| UNI EN 1807-2 : 2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| I.S. EN 1459-2:2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| I.S. EN 15572:2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| UNI EN ISO 11148-4 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
| UNI EN ISO 11148-9 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| DIN EN 474-1:2014-03 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 11148-12:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS (ISO 11148-12:2012) |
| I.S. EN 14753:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL |
| I.S. EN 16743:2016 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN ISO 4254-14:2016 | Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016) |
| I.S. EN 1870-18:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| ISO 4254-9:2008 | Agricultural machinery Safety Part 9: Seed drills |
| I.S. EN ISO 11148-6:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012) |
| I.S. EN ISO 10517:2009 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009) |
| I.S. EN ISO 16093:2017 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
| UNE-EN 1829-1:2010 | High pressure water jet machines - Safety requirements - Part 1: Machines |
| 17/30364338 DC : 0 | BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS |
| PREN 16985 : DRAFT 2016 | SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
| UNE-EN 1459-2:2016 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
| UNE-EN 1870-14:2008 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
| PREN 12301 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| EN 1459-2:2015 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
| DIN EN 12921-1:2011-02 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010) |
| ISO 10896-1:2012 | Rough-terrain trucks Safety requirements and verification Part 1: Variable-reach trucks |
| I.S. EN ISO 4254-10:2009 | AGRICULTURAL MACHINERY - SAFETY - PART 10: ROTARY TEDDERS AND RAKES |
| I.S. EN 12301:2000 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| ISO 20474-1:2017 | Earth-moving machinery — Safety — Part 1: General requirements |
| DIN EN 13862:2010-03 | Floor cutting-off machines - Safety (includes Amendment A1:2009) |
| DIN EN 12750:2013-05 | Safety of woodworking machines - Four sided moulding machines |
| DIN EN 1953:2013-12 | ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 12348:2010-01 | Core drilling machines on stand - Safety (includes Amendment A1:2009) |
| DIN EN 1870-17:2015-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
| DIN EN 12547:2014-12 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| DIN EN 12649:2011-09 | Concrete compactors and smoothing machines - Safety |
| DIN EN 1915-4:2009-06 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
| DIN EN 13020:2016-02 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| DIN EN 12717:2009-07 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| DIN EN 13113:2011-05 | Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010) |
| DIN EN 12779:2016-03 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| DIN EN 848-3:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| DIN EN 13861:2012-01 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| DIN EN 703:2009-12 | Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety (includes Amendment A1:2009) |
| DIN EN 848-1:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| DIN EN 14017:2009-07 | AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY |
| DIN EN 930:2010-07 | Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements (includes Amendment A2:2009) |
| DIN EN 14018:2010-02 | AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY |
| DIN EN 13985:2009-11 | Machine tools - Safety - Guillotine shears (includes Amendment A1:2009) |
| DIN EN 931:2010-07 | Footwear manufacturing machines - Lasting machines - Safety requirements (includes Amendment A2:2009) |
| DIN EN 848-2:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| DIN EN 14673:2010-10 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010) |
| BS EN 848-1 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| UNE-EN 15954-2:2014 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| BS EN 1417:2014 | Plastics and rubber machines. Two-roll mills. Safety requirements |
| UNE-EN 1889-1:2012 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| BS EN 13898 : 2003 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| UNE-EN 15955-2:2014 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| BS EN 861 : 2007 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| BS EN 12215 : 2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| BS EN ISO 11681-1:2011 | Machinery for forestry. Portable chain-saw safety requirements and testing Chain-saws for forest service |
| ISO 11148-4:2012 | Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools |
| BS EN 848-2 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| UNE-EN 13204:2017 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| DIN EN 1889-1:2011-10 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| BS EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar. Safety requirements |
| BS EN 12649 : 2008 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| BS EN 1539:2015 | Dryers and ovens, in which flammable substances are released. Safety requirements |
| UNE-EN 848-1:2008 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
| DIN EN ISO 11681-2:2017-10 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011 + Amd 1:2017) (includes Amendment A1:2017) |
| UNI EN 13525 : 2010 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| EN 16307-1:2013+A1:2015 | Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
| UNE-EN 848-3:2013 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
| I.S. EN 848-2:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| EN 16486:2014 | Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements |
| EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
| EN 13985:2003+A1:2009 | Machine tools - Safety - Guillotine shears |
| EN ISO 19432:2012 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
| EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
| UNI EN 12921-1 : 2010 | MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| UNI EN 14677 : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| UNI EN 12001 : 2012 | CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| UNI EN 1012-1 : 2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| UNI EN 1870-13 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| UNI EN 1889-1 : 2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| UNI EN 12203 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
| UNI EN 13113 : 2010 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 14910 : 2010 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| UNI EN 12159 : 2013 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| UNI EN 972 : 2010 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
| UNI EN 474-12 : 2009 | EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS |
| UNI EN 614-1 : 2009 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| UNI EN 500-1 : 2010 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNI EN 13862 : 2009 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| UNI EN 15954-2 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 15027 : 2009 | TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
| UNI EN 13977 : 2011 | RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| UNI EN 14017 : 2010 | AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY |
| UNI EN 848-3 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| UNI EN 12750 : 2013 | SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| UNI EN 1114-1 : 2011 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
| UNI EN 1845 : 2008 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 14673 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| UNI EN 1870-16 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| UNI EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| UNI EN 860 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANNING MACHINES |
| UNI EN 13457 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 815 : 2009 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| UNI EN 12981 : 2009 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 12649 : 2011 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| UNI EN 12653 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12417 : 2009 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| UNI EN 14439 : 2009 | CRANES - SAFETY - TOWER CRANES |
| UNI EN 12547 : 2014 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| UNI EN 201 : 2010 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 1012-3 : 2014 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| UNI EN 14466 : 2008 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| UNI EN 13418 : 2013 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| UNI EN 859 : 2012 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| UNI EN 12757-1 : 2010 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| UNI EN 13112 : 2010 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 848-1 : 2013 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| UNI EN 996 : 2009 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 13861 : 2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| UNI EN ISO 11681-1 : 2012 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 1: CHAIN-SAWS FOR FOREST SERVICE |
| UNI EN ISO 19432 : 2013 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS |
| UNI EN 14656 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| UNI EN 12418 : 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| UNI EN 14985 : 2012 | CRANES - SLEWING JIB CRANES |
| UNI EN 1870-14 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| EN 860:2007+A2:2012 | Safety of woodworking machines - One side thickness planing machines |
| UNI EN 1953 : 2013 | Atomising and spraying equipment for coating materials - Safety requirements |
| UNI EN 1915-4 : 2012 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
| UNI EN 13898 : 2009 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| UNI EN 1870-4 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| UNI EN 792-8 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| UNI EN 12409 : 2011 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 14238 : 2009 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
| UNI EN 13000 : 2014 | CRANES - MOBILE CRANES |
| UNI EN 931 : 2010 | FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 848-2 : 2013 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| UNI EN 930 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS |
| EN 13204:2016 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| UNI EN 12336 : 2009 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 869 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
| UNI EN 12044 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 792-9 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| UNI EN 12717 : 2009 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| UNI EN 14070 : 2009 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN 14043 : 2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| UNI EN 15955-2 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 13985 : 2009 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| UNI EN 861 : 2012 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| UNI EN 12348 : 2009 | CORE DRILLING MACHINES ON STAND - SAFETY |
| UNI EN 13128 : 2009 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| UNI EN 14886 : 2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
| UNI EN 13355 : 2009 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
| UNI EN 12215 : 2010 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNI EN 12621 : 2010 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| UNI EN 14044 : 2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| UNI EN 13675 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| UNI EN 690 : 2014 | AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY |
| UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| UNI EN 14681 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| DIN EN ISO 11148-6:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012) |
| UNE-EN 50223:2016 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| ISO 5395-2:2013 | Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers |
| UNI EN 1807-1 : 2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| 10/30235571 DC : DRAFT DEC 2010 | BS EN 13418 - PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
| UNE-EN 15163:2018 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| 09/30183554 DC : 0 | BS EN ISO 11148-8 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| BS EN 16564:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| 14/30293313 DC : 0 | BS EN ISO 19085-2 - WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES |
| BS ISO 4254-9:2008 | Agricultural machinery. Safety Seed drills |
| 16/30342849 DC : 0 | BS EN 12733 - AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| I.S. EN ISO 11148-9:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011) |
| BS EN 15949:2012 | Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills |
| 00/715165 DC : DRAFT OCT 2000 | BS EN 13954 - FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS ISO 19224:2017 | Continuous surface miners (CSM). Safety requirements |
| 13/30284894 DC : 0 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| DIN EN 16307-6 E : 2014 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: SUPPLEMENTARY REQUIREMENTS FOR BURDEN AND PERSONNEL CARRIERS |
| 08/30182786 DC : DRAFT JULY 2008 | BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| DIN EN ISO 11148-4:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012) |
| DIN EN 1870-19:2014-03 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| PREN 12013 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| 13/30255092 DC : 0 | BS EN 1417 - PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS |
| 02/706849 DC : DRAFT MAY 2002 | BS EN 1915-4 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS |
| DIN EN ISO 11806-1:2012-05 | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) |
| I.S. EN 848-3:2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| 13/30276220 DC : 0 | BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| PREN 848-3 : DRAFT 2010 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| UNI EN ISO 11806-1 : 2012 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE |
| BS EN 12012-1 : 2007 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| DIN EN 15572:2015-12 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| 10/30211872 DC : 0 | BS EN 12001 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| 14/30302903 DC : 0 | BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
| BS EN ISO 11148-6:2012 | Hand-held non-electric power tools. Safety requirements Assembly power tools for threaded fasteners |
| 12/30263881 DC : 0 | BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| 09/30175684 DC : 0 | BS EN 14673:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| I.S. EN 16774:2016 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
| 09/30187535 DC : 0 | BS EN 13000 - CRANES - MOBILE CRANES |
| 09/30187374 DC : 0 | BS ISO 11148-2 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| 04/30123607 DC : DRAFT OCT 2004 | EN 15061:2004 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| BS EN 16228-1:2014 | Drilling and foundation equipment. Safety Common requirements |
| 08/30181434 DC : DRAFT DEC 2008 | BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| 10/30233953 DC : 0 | BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| 16/30335973 DC : 0 | BS ISO 19085-9 - WOODWORKING MACHINES - SAFETY - PART 9: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) |
| UNI EN 1829-1 : 2010 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES |
| 17/30317170 DC : 0 | BS EN ISO 20430 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| 16/30331355 DC : 0 | BS EN ISO 19085-8 - WOODWORKING MACHINES - SAFETY - PART 8: WIDE BELT CALIBRATING AND SANDING MACHINES |
| BS EN ISO 16093:2017 | Machine tools. Safety. Sawing machines for cold metal |
| 14/30293310 DC : 0 | BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS |
| 11/30232159 DC : 0 | BS EN ISO 4254-1 - AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 14/30297793 DC : 0 | BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES |
| 12/30268301 DC : 0 | BS EN 16486 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
| DIN ISO 20966:2008-04 | AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING |
| BS EN 1807-1:2013 | Safety of woodworking machines. Band sawing machines Table band saws and band re-saws |
| DIN EN 1870-18:2013-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| BS EN 16851:2017 | Cranes. Light crane systems |
| 10/30214886 DC : 0 | BS EN ISO 5395-2 - GARDEN EQUIPMENT - SAFETY OF POWERED LAWNMOWERS - PART 2: PEDESTRIAN CONTROLLED LAWNMOWERS |
| DIN EN ISO 23771:2015-06 | TEXTILE MACHINERY - GUIDE TO THE DESIGN OF TEXTILE MACHINERY FOR REDUCTION OF THE NOISE EMISSIONS (ISO 23771:2015) |
| BS EN ISO 11148-7:2012 | Hand-held non-electric power tools. Safety requirements Grinders |
| 13/30246657 DC : 0 | BS EN 16307-6 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: SUPPLEMENTARY REQUIREMENTS FOR BURDEN AND PERSONNEL CARRIERS |
| BS EN 14017 : 2005 | AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY |
| DIN EN 16500:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| 04/19987464 DC : 0 | BS EN 15027 - TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
| 06/30154874 DC : DRAFT SEP 2006 | BS ISO 4254-9 - AGRICULTURAL MACHINERY - SAFETY - PART 9: SEED DRILLS |
| BS EN 15955-2:2013 | Railway applications. Track. Demountable machines and associated equipment General safety requirements |
| BS EN 14886:2008 | Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements |
| PREN 13525 : DRAFT 2016 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| BS EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws |
| UNI EN 1870-18 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| DIN EN ISO 5395-3:2014-03 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR (ISO 5395-3:2013 + AMD 1:2017, CORRECTED VERSION 2017-03) |
| UNE-EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
| BS ISO 20966:2007 | Automatic milking installations. Requirements and testing |
| DIN EN 16500 E : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
| DIN EN ISO 8230-1:2009-05 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| BS EN 16774:2016 | Safety of machinery. Safety requirements for steel converter and associated equipment |
| DIN EN ISO 11148-10:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) |
| UNI EN ISO 11148-11 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| I.S. EN ISO 5395-2:2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS (ISO 5395-2:2013) |
| EN 1459-1:2017 | Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks |
| I.S. EN 16719:2018 | TRANSPORT PLATFORMS |
| I.S. EN 16228-1:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNI EN ISO 11148-3 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| I.S. EN 15954-2:2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 15094:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| BS EN 474-1 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 5395-3:2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR (ISO 5395-3:2013) |
| 16/30337122 DC : 0 | BS EN 16990 - NON-TYPE APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - ALL TERRAIN VEHICLES (ATVS - QUADS) AND SIDE BY SIDE VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS |
| PREN 13852-1 : DRAFT 2011 | CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| PREN 17003 : DRAFT 2016 | ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
| PREN 12547 : DRAFT 2011 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| BS EN 474-1:2006+A6:2019 | Earth-moving machinery. Safety General requirements |
| 14/30301874 DC : 0 | BS EN 16770 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS |
| 16/30335146 DC : 0 | BS EN 16985 - SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 12013:2018 | Plastics and rubber machines. Internal mixers. Safety requirements |
| EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| I.S. EN 12013:2018 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
| ONORM EN 12733 : 2011 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| PREN 13020 : DRAFT 2014 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| SAE J1782_201305 | SHIP SYSTEMS AND EQUIPMENT - HYDRAULIC SYSTEMS - NOISE CONTROL |
| ISO/TS 3691-7:2011 | Industrial trucks — Safety requirements and verification — Part 7: Regional requirements for countries within the European Community |
| DIN EN 12757-1:2011-02 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010) |
| EN 12012-1:2007+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators |
| ISO 16368:2010 | Mobile elevating work platforms Design, calculations, safety requirements and test methods |
| BS EN 12301 : 2000 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| I.S. EN ISO 11148-3:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012) |
| DIN EN 14985:2012-05 | Cranes - Slewing jib cranes |
| ONORM EN 12301 : 2009 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| DIN EN 13977:2011-04 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| DIN EN 861:2012-09 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| DIN EN 201:2010-02 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 972:2011-07 | Tannery machines - Reciprocating roller machines - Safety requirements (includes Amendment A1:2010) |
| DIN EN 859:2012-09 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| DIN EN 1870-1:2009-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| DIN EN 1114-1:2012-01 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
| DIN EN 14044:2014-04 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DIN EN 474-12:2010-05 | Earth-moving machinery - Safety - Part 12: Requirements for cable excavators (includes Amendment A1:2008) |
| DIN EN 860:2012-09 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| DIN EN 14043:2014-04 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DIN EN 690:2014-03 | AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY |
| ISO 4254-10:2009 | Agricultural machinery Safety Part 10: Rotary tedders and rakes |
| BS EN 12547:2014 | Centrifuges. Common safety requirements |
| ISO 11148-6:2012 | Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners |
| ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Part 1: Common safety requirements |
| BS EN ISO 10821 : 2005 | INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
| UNE-EN 12621:2006 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| BS EN 690:2013 | Agricultural machinery. Manure spreaders. Safety |
| ISO 11148-1:2011 | Hand-held non-electric power tools Safety requirements Part 1: Assembly power tools for non-threaded mechanical fasteners |
| ISO 19432:2012 | Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements |
| DIN EN 12301:2010-02 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| BS EN 13675 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| ISO 10821:2005 | Industrial sewing machines Safety requirements for sewing machines, units and systems |
| BS EN 13525 : 2005 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| BS EN 869 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
| BS EN 12417 : 2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| BS EN 815 : 1997 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| BS EN 1870-1 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| UNE-EN 16228-1:2015 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| ISO 4254-1:2013 | Agricultural machinery — Safety — Part 1: General requirements |
| BS EN 703 : 2004 | AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY |
| UNE-EN 13524:2003 | Highway maintenance machines - Safety requirements |
| BS EN 12621 : 2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| BS EN 500-1 : 2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
| BS EN 12336 : 2005 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 13112 : 2002 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
| EN 13525:2005+A2:2009 | Forestry machinery - Wood chippers - Safety |
| BS EN 12779:2015 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements |
| UNE-EN ISO 11681-1:2012 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) |
| BS EN 13204 : 2004 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| BS EN 931 : 1998 | FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS |
| UNE-EN 12649:2009 | Concrete compactors and smoothing machines - Safety |
| BS EN 13985 : 2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| BS EN 201:2009 | Plastics and rubber machines. Injection moulding machines. Safety requirements |
| UNE-EN 1539:2010 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| BS EN 1915-4 : 2004 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
| UNE-EN ISO 11681-2:2012 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011) |
| BS EN 1746:1999 | Safety of machinery. Guidance for the drafting of the noise clauses of safety standards |
| BS EN 13977:2011 | Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance |
| ISO 11148-2:2011 | Hand-held non-electric power tools Safety requirements Part 2: Cutting-off and crimping power tools |
| BS EN 996 : 1996 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| UNE-EN 12001:2013 | Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
| BS EN 13021 : 2003 | WINTER SERVICE MACHINES - SAFETY REQUIREMENTS |
| BS EN 930 : 1997 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS |
| BS EN 12717 : 2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| ISO 11148-9:2011 | Hand-held non-electric power tools Safety requirements Part 9: Die grinders |
| UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
| UNE-EN 13114:2002 | Tannery machines- Rotating process vessels - Safety requirements. |
| ISO 11148-8:2011 | Hand-held non-electric power tools Safety requirements Part 8: Sanders and polishers |
| BS EN 14985:2012 | Cranes. Slewing jib cranes |
| BS EN 12348 : 2000 | CORE DRILLING MACHINES ON A STAND - SAFETY |
| ISO 23771:2015 | Textile machinery Guide to the design of textile machinery for reduction of the noise emissions |
| BS EN 1870-3:2014 | Safety of woodworking machines. Circular sawing machines Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| BS EN 972 : 1998 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
| UNE-EN ISO 19432:2013 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
| ISO 11148-11:2011 | Hand-held non-electric power tools Safety requirements Part 11: Nibblers and shears |
| ISO 11680-1:2011 | Machinery for forestry Safety requirements and testing for pole-mounted powered pruners Part 1: Machines fitted with an integral combustion engine |
| UNE-EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines |
| ISO 11681-2:2011 | Machinery for forestry Portable chain-saw safety requirements and testing Part 2: Chain-saws for tree service |
| BS EN 12750:2013 | Safety of woodworking machines. Four sided moulding machines |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| ISO 11148-5:2011 | Hand-held non-electric power tools Safety requirements Part 5: Rotary percussive drills |
| BS EN 1870-4:2012 | Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading |
| UNI EN 12301 : 2008 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
| ISO 18217:2015 | Safety of woodworking machines Edge-banding machines fed by chain(s) |
| BS EN 14070 : 2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| UNE-EN 860:2007 | Safety of woodworking machines - One side thickness planing machines |
| ISO 16093:2017 | Machine tools — Safety — Sawing machines for cold metal |
| UNE-EN ISO 11850:2012 | Machinery for forestry - General safety requirements (ISO 11850:2011) |
| BS EN 12044 : 2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| BS EN 1870-13 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| BS EN 15027 : 2007 | TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
| UNE-EN 13112:2002 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements. |
| UNE-EN 12409:2009 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
| 10/30218104 DC : 0 | BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES |
| UNE-EN 13000:2010 | Cranes - Mobile cranes |
| UNE-EN 13525:2005 | Forestry machinery - Wood chippers - Safety |
| ISO 11148-10:2011 | Hand-held non-electric power tools Safety requirements Part 10: Compression power tools |
| BS EN 13114 : 2002 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
| DIN EN ISO 19432:2012-12 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
| UNE-EN 15059:2009 | Snow grooming equipment - Safety requirements |
| ISO 11148-7:2012 | Hand-held non-electric power tools — Safety requirements — Part 7: Grinders |
| BS EN 474-12 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS |
| I.S. EN 13525:2005 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| BS EN 13113 : 2002 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
| UNE-EN 1870-16:2013 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting |
| BS EN 536:2015 | Road construction machines. Mixing plants for road construction materials. Safety requirements |
| BS EN 14439 : 2006 | CRANES - SAFETY - TOWER CRANES |
| UNE-EN 859:2008 | Safety of woodworking machines - Hand fed surface planing machines |
| UNE-EN ISO 10517:2010 | Powered hand-held hedge trimmers - Safety (ISO 10517:2009) |
| BS EN 860 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| UNE-EN 13113:2002 | Tannery machines - Roller coating machines - Safety requirements. |
| UNE-EN 1114-1:2012 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
| UNI EN ISO 11680-1 : 2012 | MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE |
| EN 1417:2014 | Plastics and rubber machines - Two-roll mills - Safety requirements |
| EN 691-1:2012 | Safety of woodworking machines - Part 1: Common requirements |
| EN 16774:2016 | Safety of machinery - Safety requirements for steel converter and associated equipment |
| EN ISO 11148-8:2011 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) |
| EN 536:2015 | Road construction machines - Mixing plants for road construction materials - Safety requirements |
| EN 201:2009 | Plastics and rubber machines - Injection moulding machines - Safety requirements |
| EN 15774:2010 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
| EN 15955-2:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| EN 792-7:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
| EN 15954-2:2013 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| EN 13675:2004+A1:2010 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
| EN 14466:2005+A1:2008 | Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests |
| EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| EN 14656:2006+A1:2010 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
| EN ISO 11681-1:2011 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) |
| EN 15027:2007+A1:2009 | Transportable wall saw and wire saw equipment for job site - Safety |
| EN 14043:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods |
| EN 14985:2012 | Cranes - Slewing jib cranes |
| EN 15094:2008 | Safety of Machinery - Safety requirements for cold flat rolling mills |
| EN 14910:2007+A1:2009 | Garden equipment - Walk-behind combustion engine powered trimmers - Safety |
| EN ISO 11148-7:2012 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012) |
| UNI EN 13021 : 2009 | WINTER SERVICE MACHINES - SAFETY REQUIREMENTS |
| EN ISO 11148-6:2012 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) |
| EN 13977:2011 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| EN 15061:2007+A1:2008 | Safety of machinery - Safety requirements for strip processing line machinery and equipment |
| EN ISO 11148-4:2012 | Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) |
| EN ISO 11148-12:2012 | Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
| EN ISO 23771:2015 | Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions (ISO 23771:2015) |
| EN ISO 11148-2:2011 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011) |
| EN ISO 4254-14:2016 | Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016) |
| UNI EN 13524 : 2014 | HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
| EN 14238:2004+A1:2009 | Cranes - Manually controlled load manipulating devices |
| EN 1870-16:2012 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting |
| EN 15949:2012 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| EN 996:1995+A3:2009 | Piling equipment - Safety requirements |
| EN 1539:2015 | Dryers and ovens, in which flammable substances are released - Safety requirements |
| EN 1870-13:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
| EN 1953:2013 | Atomising and spraying equipment for coating materials - Safety requirements |
| EN ISO 11148-5:2011 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) |
| EN 500-1:2006+A1:2009 | Mobile road construction machinery - Safety - Part 1: Common requirements |
| EN 15093:2008 | Safety of Machinery - Safety requirements for hot flat rolling mills |
| EN 792-8:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers |
| EN 930:1997+A2:2009 | Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements |
| EN ISO 11148-1:2011 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
| EN 16500:2014 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
| EN 14017:2005+A2:2009 | Agricultural and forestry machinery - Solid fertilizer distributors - Safety |
| EN 1889-1:2011 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| EN ISO 11148-3:2012 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012) |
| EN 14681:2006+A1:2010 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
| EN ISO 11148-11:2011 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) |
| EN 869:2006+A1:2009 | Safety of machinery - Safety requirements for pressure metal diecasting units |
| EN 15059:2009+A1:2015 | Snow grooming equipment - Safety requirements |
| EN 1870-3:2014 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| EN 1870-18:2013 | Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
| EN 1870-14:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
| EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
| EN 1915-4:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction |
| EN 1845:2007 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
| UNI EN 13019 : 2009 | MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS |
| EN 1870-1:2007+A1:2009 | Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws |
| EN 474-12:2006+A1:2008 | Earth-moving machinery - Safety - Part 12: Requirements for cable excavators |
| EN 1870-19:2013 | Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws |
| EN 14673:2006+A1:2010 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
| EN 859:2007+A2:2012 | Safety of woodworking machines - Hand fed surface planing machines |
| EN 14044:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods |
| EN 14439:2006+A2:2009 | Cranes - Safety - Tower cranes |
| EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN 1870-17:2012+A1:2015 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) |
| EN 815:1996+A2:2008 | Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements |
| EN 14753:2007 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
| EN 792-9:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders |
| EN 848-2 : 2007 COR 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| EN 14886:2008 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
| EN 690:2013 | Agricultural machinery - Manure spreaders - Safety |
| EN 861:2007+A2:2012 | Safety of woodworking machines - Surface planing and thicknessing machines |
| EN 848-3:2012 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
| EN ISO 11148-9:2011 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) |
| EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
| EN 14677:2008 | Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
| EN 15572:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines |
| EN 1746:1998 | Safety of machinery - Guidance for the drafting of the noise clauses of safety standards |
| EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
| EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
| EN ISO 11148-10:2011 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) |
| EN 14018:2005+A1:2009 | Agricultural and forestry machinery - Seed drills - Safety |
| EN 16307-6:2014 | Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers |
| EN 931:1997+A2:2009 | Footwear manufacturing machines - Lasting machines - Safety requirements |
| EN 13852-2:2004 | Cranes - Offshore cranes - Part 2: Floating cranes |
| I.S. EN 12012-4:2006 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
| DIN EN 16851 E : 2017 | CRANES - LIGHT CRANE SYSTEMS |
| DIN EN ISO 11148-5:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) |
| I.S. EN ISO 16092-1:2018 | MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS (ISO 16092-1:2017) |
| I.S. EN ISO 4254-8:2018 | AGRICULTURAL MACHINERY - SAFETY - PART 8: SOLID FERTILIZER DISTRIBUTORS (ISO 4254-8:2018) |
| DIN EN ISO 11148-1:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
| 09/30183560 DC : 0 | BS ISO 11148-12 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS |
| UNI EN ISO 11148-7 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| I.S. EN ISO 11148-1:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011) |
| DIN EN 691-1:2013-01 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| 09/30206358 DC : DRAFT SEP 2009 | BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| BS EN ISO 11148-8:2011 | Hand-held non-electric power tools. Safety requirements Sanders and polishers |
| 03/301050 DC : DRAFT JAN 2003 | ISO 4254-1 ED.3 - AGRICULTURAL MACHINERY - TECHNICAL MEANS FOR ENSURING SAFETY - PART 1: GENERAL |
| 15/30264711 DC : 0 | BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| 16/30318924 DC : 0 | BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES') |
| BS EN 16500:2014 | Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements |
| I.S. EN 1870-13:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| I.S. EN 14886:2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
| I.S. EN ISO 11148-4:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012) |
| 09/30187377 DC : 0 | BS ISO 11148-5 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| 16/30341470 DC : 0 | BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS) |
| BS EN ISO 18217:2015 | Safety of woodworking machines. Edge-banding machines fed by chain(s) |
| 17/30364322 DC : 0 | BS EN 16307-2 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED VARIABLE REACH TRUCKS |
| I.S. EN 792-7:2002 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| PREN 15571 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| 12/30260496 DC : 0 | BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| 15/30300474 DC : DRAFT FEB 2015 | BS ISO 19085-5 - WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS |
| ISO 4254-8:2018 | Agricultural machinery — Safety — Part 8: Solid fertilizer distributors |
| 09/30196808 DC : 0 | BS ISO 11806-1 - AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES WITH INTEGRAL COMBUSTION ENGINE |
| DIN EN ISO 11148-7:2013-01 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012) |
| 07/30172338 DC : DRAFT DEC 2007 | BS EN 1114-1 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
| BS EN 14033-3 : 2009 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| BS EN 16307-6:2014 | Industrial trucks. Safety requirements and verification Supplementary requirements for burden and personnel carriers |
| 13/30273033 DC : 0 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| DIN EN 14033-3:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| 14/30258503 DC : 0 | BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| BS EN ISO 11148-9:2011 | Hand-held non-electric power tools. Safety requirements Die grinders |
| 98/717506 DC : DRAFT DEC 1998 | PREN 13389 - FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 1870-18:2013 | Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
| UNE-EN ISO 23771:2015 | Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions (ISO 23771:2015) |
| UNE-EN 15571:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| PREN 14439 : DRAFT 2014 | CRANES - SAFETY - TOWER CRANES |
| BS EN ISO 4254-14:2016 | Agricultural machinery. Safety Bale wrappers |
| 14/30292850 DC : 0 | BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| 14/30299146 DC : 0 | BS EN 16743 - FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12417:2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| 15/30294714 DC : DRAFT MAY 2015 | BS EN ISO 4254-9 - AGRICULTURAL MACHINERY - SAFETY - PART 9: SEED DRILLS |
| 14/30298247 DC : 0 | BS EN 13020 - ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| 06/30154871 DC : DRAFT SEP 2006 | BS ISO 4254-8 - AGRICULTURAL MACHINERY - SAFETY - PART 8: SOLID FERTILIZER DISTRIBUTORS |
| 00/717064 DC : DRAFT NOV 2000 | PREN 14070 - SAFETY OF MACHINES TOOLS - TRANSFER AND SPECIAL PURPOSE MACHINES |
| PD CEN/TR 614-3:2010 | Safety of machinery Ergonomic principles for the design of mobile machinery |
| BS EN ISO 11148-4:2012 | Hand-held non-electric power tools. Safety requirements Non-rotary percussive power tools |
| DIN EN 15746-2:2016-02 (Draft) | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015 |
| 09/30187380 DC : 0 | BS ISO 11148-10 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| I.S. EN 15093:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| UNE-EN ISO 18217:2016 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
| CAN/CSA-B354.6:17 | Mobile elevating work platforms — Design, calculations, safety requirements, and test methods (Adopted ISO 16368:2010, second edition , 2010-05-15, with Canadian deviations) |
| UNE-EN 16252:2013 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
| BS EN ISO 10517 : 2009 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| I.S. EN ISO 11148-7:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012) |
| I.S. EN ISO 11148-11:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011) |
| I.S. EN ISO 19085-1:2017 | WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017) |
| UNI EN 16307-6 : 2014 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: SUPPLEMENTARY REQUIREMENTS FOR BURDEN AND PERSONNEL CARRIERS |
| UNE-EN 12999:2011 | Cranes - Loader cranes |
| BS EN 15746-2 : 2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 14677:2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| I.S. EN 1870-19:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| BS EN ISO 19085-1:2017 | Woodworking machines. Safety Common requirements |
| ISO 5395-3:2013 | Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator |
| EN ISO 18217:2015 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
| 16/30337481 DC : 0 | BS EN 13525 - FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
| EN 16719:2018 | Transport platforms |
| EN 13000:2010+A1:2014 | Cranes - Mobile cranes |
| 15/30279801 DC : 0 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN ISO 11148-10 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| 15/30314036 DC : 0 | BS EN 12012-1 - PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS |
| BS EN 1459-2 : 2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
| PREN 1417 : DRAFT 2013 | PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS |
| I.S. EN ISO 11148-5:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011) |
| EN 12301:2000+A1:2008 | Plastics and rubber machines - Calenders - Safety requirements |
| I.S. EN 15059:2009 | SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS |
| DIN EN 1870-4:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 50223:2015 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 12012-1:2007 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| DIN EN ISO 11681-2:2012-04 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011 + AMD 1:2017) |
| DIN EN 12012-4:2010-01 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
| DIN EN 614-1:2009-06 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| DIN EN 13457:2010-10 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements; German version EN 13457:2004+A1:2010 |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 792-9:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| DIN EN 13524:2014-07 | Highway maintenance machines - Safety requirements (includes Amendment A2:2014) |
| DIN EN 289:2014-09 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| BS EN 13020:2015 | Road surface treatment machines. Safety requirements |
| BS EN 13852-2:2004 | Cranes. Offshore cranes Floating cranes |
| BS EN 1889-1:2011 | Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles |
| BS EN 12012-4 : 2006 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
| UNE-EN 12779:2016 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| BS EN 13019 : 2001 | MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS |
| UNE-EN ISO 4254-1:2016 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
| BS EN 1845:2007 | Footwear manufacturing machines. Footwear moulding machines. Safety requirements |
| BS EN 14656 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| ISO 11681-1:2011 | Machinery for forestry Portable chain-saw safety requirements and testing Part 1: Chain-saws for forest service |
| BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| ISO 4254-14:2016 | Agricultural machinery Safety Part 14: Bale wrappers |
| BS EN 14043:2014 | High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods |
| BS EN 848-3:2012 | Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines |
| BS EN ISO 11681-2 : 2011 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011) |
| BS EN 1114-1:2011 | Plastics and rubber machines. Extruders and extrusion lines Safety requirements for extruders |
| BS EN 1953:2013 | Atomising and spraying equipment for coating materials. Safety requirements |
| I.S. EN 860:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| ISO 11850:2011 | Machinery for forestry — General safety requirements |
| BS EN 1012-1:2010 | Compressors and vacuum pumps. Safety requirements Air compressors |
| ISO 11148-3:2012 | Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers |
| BS EN 792-9 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| BS EN 12001:2012 | Conveying, spraying and placing machines for concrete and mortar. Safety requirements |
| BS EN 14681 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| BS EN 14910 : 2007 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| ISO 11148-12:2012 | Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws |
| BS EN 1870-14 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| BS EN 792-7 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| BS EN 1870-17 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| 17/30357380 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| EN 12387:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements |
| DIN EN 815:1996-11 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| EN 13019:2001+A1:2008 | Machines for road surface cleaning - Safety requirements |
| DIN EN 16851:2017-06 | Cranes - Light crane systems |
| CEN/TR 614-3:2010 | Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery |
| EN 12348:2000+A1:2009 | Core drilling machines on stand - Safety |
| EN 1012-1:2010 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
| EN 12001:2012 | Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
| EN 13862:2001+A1:2009 | Floor cutting-off machines - Safety |
| DIN EN 14886:2008-06 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
| DIN EN 13898:2009-09 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines |
| DIN EN 815:2009-12 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| DIN EN 12151:2008-05 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| DIN EN 15746-2:2011-12 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011) |
| DIN EN 12012-1:2010-02 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| DIN EN 996:2010-02 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
| EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| UNE-EN 860:2007+A2:2012 | Safety of woodworking machines - One side thickness planing machines |
| UNE-EN 12203:2004 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
| UNE-EN 1870-17:2013 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) |
| UNE-EN 848-2:2007+A1:2010 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
| UNE-EN 12757-1:2006+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| UNE-EN 848-2:2007 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
| UNE-EN 15746-2:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| UNE-EN 12757-1:2006 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| UNE-EN 859:2008+A2:2012 | Safety of woodworking machines - Hand fed surface planing machines |
| UNE-EN 500-1:2007 | Mobile road construction machinery - Safety - Part 1: Common requirements |
| UNE-EN 12044:2006 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
| UNE-EN 14018:2006 | Agricultural and forestry machinery - Seed drills - Safety |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.