ISO Guide 31:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Reference materials — Contents of certificates, labels and accompanying documentation
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
17-01-2024
Superseded by
Language(s)
French, English, Russian
Published date
06-11-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO/Guide 31:2015 is intended to help reference material (RM) producers in preparing clear and concise documentation to accompany an RM. It lists and explains mandatory, recommended and other categories of information to be considered in the preparation of product information sheets and RM certificates. This information can be used by RM users and other stakeholders in confirming the suitability of an RM or certified reference material (CRM).
ISO/Guide 31:2015 also contains the minimum requirements for a label attached to the RM container.
| Committee |
ISO/TC 334
|
| DocumentType |
Guide
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| PD ISO GUIDE 31:2015 | Identical |
| FD ISO GUIDE 31 : 2016 FD | Identical |
| PKN ISO GUIDE 31 : 2018 | Identical |
| JIS Q 0031:2018 | Identical |
| SA HB 19.31:2018 | Identical |
| PD 6532-2:1992 | Identical |
| UNE 82131:2003 IN | Identical |
| ASTM D 6362 : 1998 : R2003 | Standard Practice for Certificates of Reference Materials for Water Analysis |
| FD ISO GUIDE 34 : 2010 FD | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| PD ISO/TR 16476:2016 | Reference materials. Establishing and expressing metrological traceability of quantity values assigned to reference materials |
| PD 6532-5:1997 | Reference materials. Guide to the contents of certificates of reference materials Quality system guidelines for the production of reference materials |
| OIML D 18 : 2008 | THE USE OF CERTIFIED REFERENCE MATERIALS IN FIELDS COVERED BY METROLOGICAL CONTROL EXERCISED BY NATIONAL SERVICES OF LEGAL METROLOGY. BASIC PRINCIPLES |
| BS ISO 14606:2015 | Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials |
| 15/30327269 DC : 0 | BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| NF EN ISO 15351 : 2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| 06/30159593 DC : 0 | BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| 08/30182372 DC : DRAFT JULY 2008 | BS EN 15842 - FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| ASTM D 6596 : 2000 : R2005 | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
| ASTM D 6362 : 1998 : R2013 | Standard Practice for Certificates of Reference Materials for Water Analysis |
| ASTM E 2437 : 2005 | Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2014) |
| PREN 3976 : 200P1 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TEST METHOD - CHEMICAL ANALYSIS FOR THE DETERMINATION OF HYDROGEN CONTENT |
| CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| ASTM E 1834 : 2011 | Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry |
| ASTM E 2594 : 2009 | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) |
| I.S. EN ISO 15194:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| ASTM E 2594 : 2009 : R2014 | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) |
| ASTM E 2371 : 2013 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
| ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| ASTM C 1128 : 2018 : REDLINE | Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
| ISO 6974-1:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
| BS EN ISO 10993-12:2012 | Biological evaluation of medical devices Sample preparation and reference materials |
| BS EN ISO 14111:1999 | Natural gas. Guidelines to traceability in analysis |
| EN 12287 : 1999 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - DESCRIPTION OF REFERENCE MATERIALS |
| DIN ISO 6141:2004-05 | GAS ANALYSIS - REQUIREMENTS FOR CERTIFICATES FOR CALIBRATION GASES AND GAS MIXTURES |
| DIN EN ISO 148-3:2017-04 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| EN ISO 148-3:2016 | Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
| UNI EN ISO 10993-12 : 2012 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
| ASTM E 1724 : 1995 | Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials |
| 10/30215322 DC : 0 | BS EN ISO 6974-1 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
| ASTM D 6596:2000 | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
| BS EN ISO 148-3:2016 | Metallic materials. Charpy pendulum impact test Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
| UNI EN 15842 : 2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| 13/30285580 DC : 0 | BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS |
| 10/30203803 DC : 0 | BS ISO 6974-2 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
| OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| UNI CEN/TR 10317 : 2009 | EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION |
| ISO Guide 32:1997 | Calibration in analytical chemistry and use of certified reference materials |
| DIN EN 15842:2010-06 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| PD ISO GUIDE 35:2017 | Reference materials. Guidance for characterization and assessment of homogeneity and stability |
| DIN EN ISO 15351:2010-08 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
| 07/30157023 DC : 0 | BS EN ISO 15194 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| I.S. EN ISO 17034:2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS (ISO 17034:2016) |
| ASTM D 6596 : 2000 : R2016 | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
| BS EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| NF EN 15842 : 2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| ASTM D 6362 : 1998 : R2008 | Standard Practice for Certificates of Reference Materials for Water Analysis |
| I.S. EN ISO 148-3:2016 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| I.S. EN 14726:2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| DIN EN ISO 10993-12:2012-10 | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
| DIN EN ISO 6974-1:2012-11 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| UNE-EN 196-2:2014 | Method of testing cement - Part 2: Chemical analysis of cement |
| I.S. EN ISO 6974-1:2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
| I.S. EN ISO 10723:2012 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| I.S. EN ISO 6974-2:2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012) |
| DIN EN ISO 10723:2013-04 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| I.S. EN ISO 10993-8:2000 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 8: SELECTION AND QUALIFICATION OF REFERENCE MATERIALS FOR BIOLOGICAL TESTS |
| I.S. EN ISO 10993-12:2012 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012) |
| I.S. EN 196-2:2013 | METHODS OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
| DIN EN 196-2:2013-10 | METHODS OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
| PD 6532-3:2000 | Reference materials. Guide to the contents of certificates of reference materials Guide to the uses of certified reference materials |
| BS 4559-4(2000) : 2000 AMD 16907 | METHODS FOR PREPARATION OF CALIBRATION GAS MIXTURES - CERTIFICATE OF MIXTURE PREPARATION |
| BS 0-3:1997 | A standard for standards Specification for structure, drafting and presentation |
| PD 6532-5:2000 | Reference materials. Guide to the contents of certificates of reference materials General requirements for the competence of reference material producers |
| DIN EN ISO 148-3:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| BS 7825-1:1995 | Calibration of rubber and plastics test equipment Specification for principles and general requirements |
| BS ISO 29581-2:2010 | Cement. Test methods Chemical analysis by X-ray fluorescence |
| UNE-EN ISO 17034:2017 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| DIN ISO 6141 E : 2004 | GAS ANALYSIS - REQUIREMENTS FOR CERTIFICATES FOR CALIBRATION GASES AND GAS MIXTURES |
| 03/317065 DC : DRAFT NOV 2003 | ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
| BS EN ISO 15194:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| BS EN ISO 15351:2010 | Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| PD ISO/TS 14411-1:2017 | Preparation of particulate reference materials Polydisperse material based on picket fence of monodisperse spherical particles |
| 03/105598 DC : DRAFT MAY 2003 | BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT |
| PD CEN/TR 10317:2014 | European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| 14/30296672 DC : 0 | BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| BS ISO 18899:2013 | Rubber. Guide to the calibration of test equipment |
| ASTM E 2977 : 2015 : REDLINE | Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples |
| ISO 14606:2015 | Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials |
| AAMI ISO 14708-5 : 2010 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 5: CIRCULATORY SUPPORT DEVICES |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| S.R. CEN/TR 10317:2014 | EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION (ECISS) |
| ISO/TS 14411-1:2017 | Preparation of particulate reference materials — Part 1: Polydisperse material based on picket fence of monodisperse spherical particles |
| BS EN 15842:2010 | Foodstuffs. Detection of food allergens. General considerations and validation of methods |
| ISO Guide 30:2015 | Reference materials — Selected terms and definitions |
| UNI EN ISO 15351 : 2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| DIN EN ISO 6974-2:2012-11 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| UNE-EN ISO 6974-2:2013 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| BS EN 14726:2005 | Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis |
| UNE-EN ISO 6974-1:2013 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| BS EN 12287:1999 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Description of reference materials |
| EN ISO 6974-2:2012 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| UNI EN 196-2 : 2013 | METHOD OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
| UNI EN ISO 6974-2 : 2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
| EN ISO 15351:2010 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
| UNI EN ISO 6974-1 : 2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
| UNI EN ISO 10723 : 2013 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS |
| UNE-EN ISO 148-3:2017 | Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
| PD ISO/TR 11773:2013 | Global distribution of reference materials |
| 12/30271500 DC : 0 | BS ISO GUIDE 80 - GUIDANCE FOR IN-HOUSE PRODUCTION OF REFERENCE MATERIALS FOR QUALITY CONTROL (QCMS) |
| PD ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| DIN EN ISO 15194:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
| 13/30294275 DC : 0 | BS ISO GUIDE 30 - REFERENCE MATERIALS - SELECTED TERMS AND DEFINITIONS |
| CEN/TR 10317:2014 | European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
| 09/30210426 DC : 0 | BS EN ISO 15351 - STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| PD ISO GUIDE 30:2015 | Reference materials. Selected terms and definitions |
| PREN 45001 : DRAFT 1997 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| ASTM D 6808 : 2002 : R2012 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| 03/109441 DC : DRAFT JUNE 2003 | EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| UNI EN 3976 : 2008 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TEST METHOD - CHEMICAL ANALYSIS FOR THE DETERMINATION OF HYDROGEN CONTENT |
| I.S. EN ISO 15351:2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| NF EN ISO 15194 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| CEI UNI EN ISO 17034 : 1ED 2018 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| CSA Z15189 : 2003 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| BS ISO 17034 : 2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| ASTM D 6362 : 1998 | Standard Practice for Certificates of Reference Materials for Water Analysis |
| ASTM D 6808 : 2002 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| ASTM D 6596 : 2000 : R2011 | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
| ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
| I.S. EN 15842:2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| ISO/TS 16195:2013 | Nanotechnologies Guidance for developing representative test materials consisting of nano-objects in dry powder form |
| EN ISO 6141:2015 | Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015) |
| I.S. EN ISO 6141:2015 | GAS ANALYSIS - CONTENTS OF CERTIFICATES FOR CALIBRATION GAS MIXTURES (ISO 6141:2015) |
| BS EN ISO 6974-2:2012 | Natural gas. Determination of composition and associated uncertainty by gas chromatography Uncertainty calculations |
| ISO 16961:2015 | Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks |
| UNE-EN ISO 10993-12:2013 | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
| ISO 10993-12:2012 | Biological evaluation of medical devices Part 12: Sample preparation and reference materials |
| UNE-EN ISO 10723:2013 | Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
| BS EN ISO 6141:2015 | Gas analysis. Contents of certificates for calibration gas mixtures |
| ISO 10723:2012 | Natural gas — Performance evaluation for analytical systems |
| ISO 15351:1999 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| ISO 6974-2:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations |
| UNE-EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
| BS EN ISO 6974-1:2012 | Natural gas. Determination of composition and associated uncertainty by gas chromatography General guidelines and calculation of composition |
| UNE-EN ISO 6141:2015 | Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015) |
| BS EN ISO 10723:2012 | Natural gas. Performance evaluation for analytical systems |
| ISO 17034:2016 | General requirements for the competence of reference material producers |
| EN ISO 10723:2012 | Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
| EN ISO 17034:2016 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| EN ISO 10993-8 : 2000 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 8: SELECTION AND QUALIFICATION OF REFERENCE MATERIALS FOR BIOLOGICAL TESTS |
| EN 15842:2010 | Foodstuffs - Detection of food allergens - General considerations and validation of methods |
| EN 3976:2006 | Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content |
| EN ISO 15194:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009) |
| EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
| EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| BS EN ISO 17034:2016 | General requirements for the competence of reference material producers |
| PD ISO/TS 20460:2015 | Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges |
| BS ISO 14595:2014 | Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs) |
| ISO/TR 16476:2016 | Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials |
| NF ISO 14595 : 2006 | MICROBEAM ANALYSIS - ELECTRON PROBE MICROANALYSIS - GUIDELINES FOR THE SPECIFICATION OF CERTIFIED REFERENCE MATERIALS (CRMS) |
| PD ISO GUIDE 33:2015 | Reference materials. Good practice in using reference materials |
| INCITS/ISO TS 19159-1 : 2015 | GEOGRAPHIC INFORMATION - CALIBRATION AND VALIDATION OF REMOTE SENSING IMAGERY SENSORS AND DATA - PART 1: OPTICAL SENSORS |
| EN ISO 10993-12:2012 | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
| 97/402277 DC : DRAFT APR 1997 | PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| UNI EN ISO 15194 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| ISO 29581-2:2010 | Cement Test methods Part 2: Chemical analysis by X-ray fluorescence |
| ISO/TS 20460:2015 | Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
| ANSI/AAMI/ISO 10993-12:2012 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
| I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| ISO 14708-5:2010 | Implants for surgery Active implantable medical devices Part 5: Circulatory support devices |
| ASTM E 1831 : 1996 | Standard Guide for Preparing Certificates for Reference Materials Relating to Chemical Composition of Metals, Ores, and Related Materials (Withdrawn 2005) |
| ASTM D 6808 : 2002 : R2007 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| ASTM E 1724 : 1995 : R2001 | Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials (Withdrawn 2010) |
| ISO 15194:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation |
| BS EN 196-2:2013 | Method of testing cement Chemical analysis of cement |
| ISO 148-3:2016 | Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
| BS EN 3976:2006 | Aerospace series. Titanium and titanium alloys. Test method. Chemical analysis for the determination of hydrogen content |
| DIN EN 14726:2005-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| DIN EN ISO 6141:2015-07 | GAS ANALYSIS - CONTENTS OF CERTIFICATES FOR CALIBRATION GAS MIXTURES (ISO 6141:2015) |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO Guide 30:2015 | Reference materials — Selected terms and definitions |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.