ISO 9002:1994
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Quality systems — Model for quality assurance in production, installation and servicing
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
08-03-2019
Superseded by
Language(s)
English, French
Published date
30-06-1994
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DevelopmentNote |
CORRIGENDUM 1 ONLY APPLIES TO THE FRENCH VERSION. For the year 2000 revision, ISO 9001 will replace ISO 9001, 9002 and 9003 in the 1994 version. ISO 9000 is being developed in parallel with ISO 9001 and 9004. ISO 9004 will be used to go beyond Quality Management requirements. 31.8.99 ISO/FDIS 9000, ISO/FDIS 9001, ISO/FDIS 9004 Final Draft Available September 2000.
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN ISO 9002:1990-05 | Identical |
| UNI EN ISO 9002 : 1994 | Identical |
| NEN EN ISO 9002 : 1994 | Identical |
| I.S. EN ISO 9002:1994 | Identical |
| NF EN ISO 9002 : 1994 | Identical |
| CSA ISO 9002 : 94(R2000) | Identical |
| NS EN ISO 9002 : 2ED 94 | Identical |
| AS 3902-1987 | Identical |
| BS EN ISO 9002:1994 | Identical |
| NBN EN ISO 9002 : 1994 | Identical |
| NBN EN 1092-2 : 1997 | Identical |
| SN EN ISO 9002 : 94 AC 97 | Identical |
| AS/NZS ISO 9002:1994 | Identical |
| UNE-EN ISO 9002:1994 | Identical |
| NFX 50 132 : 1988 | Identical |
| GOST R ISO 9002 : 1996 | Identical |
| AS/NZS ISO 9001-3:1994 (Lam) | Identical |
| EN ISO 9002:1994/AC:1997 | Identical |
| DIN EN ISO 9002:1994-08 | Identical |
| BS 5750-2:1987 | Identical |
| CSA Q9002 : 1991 | Identical |
| DIN EN ISO 9002 E : 1994 | Identical |
| I.S. EN 12569:2000 | INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS |
| I.S. EN ISO/IEC 15416:2002 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS |
| I.S. EN 1457:1999 | CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 9000-2:2000-11 (Draft) | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 2: REQUIREMENTS APPLICABLE TO MAINTENANCE ORGANIZATIONS |
| DIN EN 9000-3:2000-11 (Draft) | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 3: REQUIREMENTS APPLICABLE TO STOCKISTS-DISTRIBUTORS |
| BS EN 1254-4:1998 | Copper and copper alloys. Plumbing fittings Fittings combining other end connections with capillary or compression ends |
| I.S. EN 1254-3:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES |
| CSA ISO 11135 : 1998:R2003 | MEDICAL DEVICES - VALIDATION AND ROUTINE CONTROL OF ETHYLENE OXIDE STERILIZATION |
| CSA C62155 : 2006 : R2011 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| CSA C1325 : 1999 : R2016 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| AAMI HE74 : 2001 : R2009 | HUMAN FACTORS DESIGN PROCESS FOR MEDICAL DEVICES |
| EN ISO 14922-2:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999) |
| EN ISO 14922-4:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999) |
| EN 45510-5-2 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES |
| DIN EN ISO-IEC 15416 E : 2002 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS |
| I.S. EN ISO 14922-3:1999 | THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 3: STANDARD QUALITY REQUIREMENTS |
| ISO 10012-1:1992 | Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment |
| EN 45510-5-4:1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-4: HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES |
| ISO 13683:1997 | Sterilization of health care products Requirements for validation and routine control of moist heat sterilization in health care facilities |
| BS EN 1254-1:1998 | Copper and copper alloys. Plumbing fittings Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 61479:2001/A1:2002 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| IEC 61156-1-1:2001 | Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capability Approval - Generic specification |
| EN 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V |
| EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| SAE AS7001A | National Aerospace and Defense Contractors Accreditation Program (NADCAP) Program Description |
| EN 13311-1:2001 | Biotechnology - Performance criteria for vessels - Part 1: General performance criteria |
| BS EN 10284:2000 | Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems |
| ISO 3999-1:2000 | Radiation protection Apparatus for industrial gamma radiography Part 1: Specifications for performance, design and tests |
| EN 12079 : 1999 | OFFSHORE CONTAINERS - DESIGN, CONSTRUCTION, TESTING, INSPECTION AND MARKING |
| CEN ISO/TR 13881:2011 | Petroleum and natural gas industries - Classification and conformity assessment of products, processes and services (ISO/TR 13881:2000) |
| BS EN 61479:2001 | Live working. Flexible conductor covers (line hoses) of insulating material |
| BS EN 1492-1 : 2000 | TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| EN 12306:1997 | Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination |
| EIA 681 : 2015 STABILIZED | ASSESSMENT GUIDE FOR PROCESS CERTIFICATION |
| EN 12195-2:2000 | Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres |
| IEC 60748-23-1:2002 | Semiconductor devices - Integrated circuits - Part 23-1: Hybrid integrated circuits and film structures - Manufacturing line certification - Generic specification |
| ISO 9152:1998 | Aerospace Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa Procurement specification |
| I.S. EN ISO 14922-2:1999 | THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS |
| ISO 9418:1998 | Aerospace — Rivets, solid, in aluminium or aluminium alloys — Procurement specification |
| DIN EN 1677-5:2009-03 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| EN 61209:1999 | Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results |
| DIN ISO 2020-2:1999-01 | AEROSPACE - PREFORMED FLEXIBLE STEEL WIRE ROPE FOR AIRCRAFT CONTROLS - PART 2: TECHNICAL SPECIFICATION |
| ISO 2020-2:1997 | Aerospace — Preformed flexible steel wire rope for aircraft controls — Part 2: Technical specification |
| DIN EN 1492-2:2009-05 | TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| DIN EN 1492-1:2009-05 | TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| EN 60870-5-6:2009 | Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion standards |
| EN 12462:1998 | Biotechnology - Performance criteria for pumps |
| ISO 13411:1997 | Aerospace — Airframe needle roller, cylindrical roller and track roller bearings — Technical specification |
| EN 12781:2001 | Wallcoverings - Specification for cork panels |
| EN 60660:1999 | Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV |
| BS EN 60660:2000 | Insulators. Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV |
| ISO 28278-1:2011 | Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| EN 13312-1:2001 | Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria |
| ISO 14922-3:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 3: Standard quality requirements |
| ISO 12288:2000 | Aerospace — Rivets, solid, in nickel alloy — Procurement specification |
| EN 45510-1 : 1997 | Guide for procurement of power station equipment - Part 1: Common clauses |
| BS ISO 10290:1993 | Textiles. Cotton yarns. Specifications |
| EN 45510-6-2 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-2: TURBINE AUXILIARIES - FEEDWATER HEATERS |
| CR ISO 17663 : 2001 | WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES |
| BS EN 877 : 1999 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| DIN EN 74-2:2009-01 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| ISO 21138-3:2007 | Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 3: Pipes and fittings with non-smooth external surface, Type B |
| ISO 10792-3:1995 | Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 3: Technical specification |
| DIN EN 12890:2000-06 | FOUNDING - PATTERNS, PATTERN EQUIPMENT AND CORE BOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
| ISO 20492-1:2008 | Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests |
| EN 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| EN 61284:1997 | Overhead lines - Requirements and tests for fittings |
| BS EN 1653:1998 | Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
| SAE ARP5596B | Cargo Shoring Guidelines |
| EN 60746-1:2003 | Expression of performance of electrochemical analyzers - Part 1: General |
| SAE ARP 5486 : 2013 | AIR CARGO PALLETS - UTILIZATION GUIDELINES |
| DIN ISO 15226:2017-03 | TECHNICAL PRODUCT DOCUMENTATION - LIFE CYCLE MODEL AND ALLOCATION OF DOCUMENTS (ISO 15226:1999) |
| ISO 13463:1999 | Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel — Guidelines to help in the definition of a product specification |
| EN 12109:1999 | Vacuum drainage systems inside buildings |
| VDE 0441-3 : 2000-12 | INSULATORS - TESTS ON INDOOR POST INSULATORS OF ORGANIC MATERIAL FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV UP TO BUT NOT INCLUDING 300 KV |
| EN 12690:1999 | Biotechnology - Performance criteria for shaft seals |
| DIN EN 15644:2009-03 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| EN 12763:2000 | Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery |
| ISO 10011-1:1990 | Guidelines for auditing quality systems Part 1: Auditing |
| EN 12101-7:2011 | Smoke and heat control systems - Part 7: Smoke duct sections |
| CR 13576 : 1999 | IMPLEMENTATION OF EN 729 ON QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS |
| BS IEC 60748-23-1:2002 | Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certification Generic specification |
| BS EN 1492-2 : 2000 | TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES, FOR GENERAL PURPOSE USE |
| EN 12075:1997 | Biotechnology - Large-scale process and production - Procedures for fermentation and downstream processes |
| IEC 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V |
| EN 61229:1995/A2:2002 | RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS |
| I.S. EN ISO 14922-1:1999 | THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 1: GUIDANCE FOR SELECTION AND USE |
| DEFSTAN 05-92/2(1995) : 1995 | QUALITY SYSTEM REQUIREMENTS FOR PRODUCTION, INSTALLATION AND SERVICING |
| BS EN 12101-8:2011 | Smoke and heat control systems Smoke control dampers |
| BS EN 12101-7:2011 | Smoke and heat control systems Smoke duct sections |
| BS EN 1457:1999 | Chimneys. Clay/ceramic flue liners. Requirements and test methods |
| I.S. EN 1677-5:2001 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| IPC SPVC-LAT1 : 2010 | ANALYTICAL PROCEDURES FOR PORTABLE LEAD-FREE ALLOY TEST DATA |
| PREN 2043 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS) |
| BS EN ISO 14922-4:1999 | Thermal spraying. Quality requirements of thermally sprayed structures Elementary quality requirements |
| BS EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| I.S. EN 1492-2:2000 | TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| DEFSTAN 05-94/1(1991) : 1991 | GUIDANCE ON QUALITY SYSTEM REQUIREMENTS FOR THE IMPLEMENTATION OF DEFSTANS 05-91, 05-92, AND 05-93 |
| DEFSTAN 61-3/5(1992) : INTERIM | GENERIC SPECIFICATION FOR BATTERIES, NON RECHARGEABLE, PRIMARY |
| CLC/TS 61112:2006 | Blankets of insulating material for electrical purposes |
| DEFSTAN 05-92/1(1991) : 1991 | QUALITY SYSTEM REQUIREMENTS FOR PRODUCTION AND INSTALLATION |
| DEFSTAN 05-94/2(1995) : 1995 | GUIDANCE ON QUALITY SYSTEM REQUIREMENTS FOR THE IMPLEMENTATION OF DEFSTANS 05-91, 05-92 AND 05-93 |
| MIL-DTL-13931 Revision J:1999 | Cannon: General Specification for |
| SBAC TS 138 : 6 | MANUFACTURING SPECIFICATION FOR INSERTS, IMPERIAL, THINWALL, SCREW LOCKING, (INCONEL 718), SILVER COATED |
| DEFSTAN 23-6/3(2000) : 2000 | GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT |
| PREN 3043 : 200P2 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 900 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| PREN 3005 : 200P1 | AEROSPACE SERIES - NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - TECHNICAL SPECIFICATION |
| PREN 2582 : 200P1 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - TECHNICAL SPECIFICATION |
| BS EN ISO 14922-2:1999 | Thermal spraying. Quality requirements of thermally sprayed structures Comprehensive quality requirements |
| DD ENV 61400-1:1995 | Wind turbine generator systems Safety requirements |
| I.S. EN 1492-1:2000 | TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE |
| I.S. EN ISO 10472-1:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| I.S. EN ISO 9000-1:1994 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 1: GUIDELINES FOR SELECTION AND USE |
| I.S. EN 1254-4:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
| ISO 9000-1:1994 | Quality management and quality assurance standards — Part 1: Guidelines for selection and use |
| I.S. EN 1254-1:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES |
| CAN/CSA-E432-2-98 (R2017) | Safety Specifications for Incandescent Lamps - Part 2: Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes (adopted IEC 432-2:1994, first edition, including Amendment 1:1996 and Amendment 2:1997, with Canadian deviations) | Prescriptions de sécurité pour lampes à incandescence - Partie 2: Lampes tungstène-halogène pour usage domestique et éclairage général similaire (norme CEI 432-2:1994 adoptée, première édition, avec l\'amendement 1:1996 and l\'amendement 2:1997, avec exigences propres au Canada) |
| CSA E432.2 : 1998 : INC : UPD 1 : 1998 : R2012 | SAFETY SPECIFICATIONS FOR INCANDESCENT LAMPS - TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
| CSA ISO 13488 : 1998 | QUALITY SYSTEMS - MEDICAL DEVICES - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9002 |
| CSA ISO 11137 : 1998 | STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS FOR VALIDATION AND ROUTINE CONTROL - RADIATION STERILIZATION |
| IEC 60746-2:2003 | Expression of performance of electrochemical analyzers - Part 2: pH value |
| ISO 10721-2:1999 | Steel structures — Part 2: Fabrication and erection |
| ISO 21138-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2: Pipes and fittings with smooth external surface, Type A |
| ISO 13488:1996 | Quality systems — Medical devices — Particular requirements for the application of ISO 9002 |
| DIN EN 15650:2010-09 | Ventilation for buildings - Fire dampers |
| IEC 60660:1999 | Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV |
| I.S. EN ISO 14922-4:1999 | THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 4: ELEMENTARY QUALITY REQUIREMENTS |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| IEC 61243-2:1995+AMD1:1999+AMD2:2002 CSV | Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
| ISO 14922-4:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 4: Elementary quality requirements |
| ISO 10955:1999 | Aerospace — End-fittings and turnbarrels for aircraft control wire rope — Technical specification |
| DIN EN 10242:1995-03 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| ISO/TR 13881:2000 | Petroleum and natural gas industries Classification and conformity assessment of products, processes and services |
| ISO 9763:1999 | Aerospace — Aircraft control wire rope assemblies — Technical specification |
| IEC 60746-1:2003 | Expression of performance of electrochemical analyzers - Part 1: General |
| IEC 61229:1993+AMD1:1998+AMD2:2002 CSV | Rigid protective covers for live working on a.c. installations |
| IEC 61207-3:2002 | Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| ISO 14190:1998 | Aerospace — Airframe rolling bearings: ball and spherical roller bearings — Technical specification |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| ISO 14922-2:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 2: Comprehensive quality requirements |
| ISO 11134:1994 | Sterilization of health care products — Requirements for validation and routine control — Industrial moist heat sterilization |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| ISO 11137:1995 | Sterilization of health care products Requirements for validation and routine control Radiation sterilization |
| ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
| IEC 61481:2001+AMD1:2002+AMD2:2004 CSV | Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c. |
| ISO/IEC Guide 25:1990 | General requirements for the competence of calibration and testing laboratories |
| ISO 21927-8:2017 | Smoke and heat control systems — Part 8: Smoke control dampers |
| ISO 9000-4:1993 | Quality management and quality assurance standards — Part 4: Guide to dependability programme management |
| ISO 9139:1998 | Aerospace — Nuts, plain or slotted (castellated) — Procurement specification |
| 97/703020 DC : 0 | ISO/DIS 3999 - APPARATUS FOR INDUSTRIAL GAMMA RADIOGRAPHY - DESIGN AND TEST CRITERIA |
| SAEITC TS172-4 | TS172 Performance Specification for Nut, Union, Metric, Threaded, Self- Locking A286 Dry Film Lubricated |
| ASTM D 6590/D6590M :2000 | Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans |
| BS EN 12094-13:2001 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for check valves and non-return valves |
| ASTM D 6788 : 2002 : R2017 | Standard Specification for Repositionable Pressure-Sensitive Flags |
| VDE 0682-412 : 2001 AMD 1 2003 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| DIN EN 61243-2 : 2001 AMD 2 2003 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| ASTM D 6787 : 2002 : R2012 | Standard Specification for Repositionable Note Pad |
| BS EN ISO/IEC 15416:2002 | Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Linear symbols |
| BS EN ISO 15541:2001 | Ships and marine technology. Fire resistance of hose assemblies. Requirements for the test bench |
| BS EN 61190-1-1:2002 | Attachment materials for electronic assembly Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| BS EN 13312-1:2001 | Biotechnology. Performance criteria for piping and instrumentation General performance criteria |
| BS EN ISO 13488:2001 | Quality systems. Medical devices. Particular requirements for the application of EN ISO 9002 |
| BS EN 60746-1:2003 | Expression of performance of electrochemical analyzers General |
| DIN EN 61284 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| DD ENV 1453-2:2001 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| BS EN ISO 14111:1999 | Natural gas. Guidelines to traceability in analysis |
| BS EN 45510-6-2:1998 | Guide for the procurement of power station equipment. Turbine auxiliaries Feedwater heaters |
| BS EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for interconnection structures (printed boards) |
| BS IEC 61111:1992 | Matting of insulating material for electrical purposes |
| BS EN 60694:1997 | Common specifications for high-voltage switchgear and controlgear standards |
| BS EN 61192-1:2003 | Workmanship requirements for soldered electronic assemblies General |
| BS EN 45510-4-8:2000 | Guide for the procurement of power station equipment. Boiler auxiliaries Dust handling plant - Section 8: Dust handling |
| BS EN 1826:1997 | Biotechnology. Large-scale process and production. Control procedures for raw materials |
| BS EN 2000:1992 | Quality assurance. EN aerospace products. Approval of the quality system of manufacturers |
| BS IEC 61112:1992 | Blankets of insulating material for electrical purposes |
| DD ENV 1401-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U) Guidance for assessment of conformity |
| BS EN 1654:1998 | Copper and copper alloys. Strip for springs and connectors |
| BS EN 61192-2:2003 | Workmanship requirements for soldered electronic assemblies Surface-mount assemblies |
| BS A 342:1999 | Nuts, plain or slotted (castellated). Procurement specification |
| BS ISO 10792-3:1995 | Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner Technical specification |
| BS 2A 302:2000 | Nuts, self-locking, with maximum operating temperatures less than or equal to 425°C. Procurement specification |
| BS EN 45012:1998 | General requirements for bodies operating assessment and certification/registration of quality systems |
| BS EN ISO 9000-1:1994 | Quality management and quality assurance standards Guidelines for selection and use |
| BS EN 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V |
| ASTM D 6788 : 2002 : R2007 | Standard Specification for Repositionable Pressure-Sensitive Flags |
| BS EN 61264:1999 | Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear |
| SAEITC TS156-2 | TS156 Performance Specification for Insert Salvage Metric Thinwall Screw Locking, Inconel 718 Silver Coated |
| ASTM D 6123/D6123M : 1997 : R2012 | Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
| BS EN 12306:1998 | Biotechnology. Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination |
| BS EN 45510-1:1998 | Guide for the procurement of power station equipment Common clauses |
| BS EN 867-1:1997 | Non-biological systems for use in sterilizers General requirements |
| BS EN 45510-5-2:1998 | Guide for the procurement of power station equipment Gas turbines |
| ASTM D 6590/D6590M : 2000 : R2012 | Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans |
| VDI 4060 Blatt 2:2005-06 | Integrated Management Systems - Guidance for practical implementation - Case studies |
| ASTM D 6123/D6123M : 1997 : R2007 | Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
| BS EN 1074-1:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests General requirements |
| ASTM E 2484 : 2008 : R2015 | Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices (Withdrawn 2024) |
| ASTM D 6788 : 2002 | Standard Specification for Repositionable Pressure-Sensitive Flags |
| ASTM D 6787 : 2002 : R2007 | Standard Specification for Repositionable Note Pad |
| BS EN 3207:1998 | Rubber compounds. Technical specification |
| BS EN 45510-6-5:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Dry cooling systems - Section 5: Dry cooling systems |
| BS EN 12079:1999 | Offshore containers. Design, construction, testing, inspection and marking |
| BS EN 45510-4-2:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Gas-air, steam-air and gas-gas heaters - Gas-air,steam-air and gas-gas heaters |
| BS EN 12109:1999 | Vacuum drainage systems inside buildings |
| BS EN 1592-1:1998 | Aluminium and aluminium alloys. HF seam welded tubes Technical conditions for inspection and delivery |
| DD ENV ISO 14907-1:2001 | Road transport and traffic telematics (RTTT). Electronic fee collection (EFC). Test procedures for user and fixed equipment Description of test procedures |
| BS EN 866-1:1997 | Biological systems for testing sterilizers and sterilization processes General requirements |
| BS EN 13311-1:2001 | Biotechnology. Performance criteria for vessels General performance criteria |
| BS EN 12690:1999 | Biotechnology. Performance criteria for shaft seals |
| BS A 302:1992 | Self-locking nuts with maximum operating temperature less than or equal to 425°C. Procurement specification |
| BS EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements |
| BS EN 60383-1:1998 | Insulators for overhead lines with a nominal voltage above 1000 V Ceramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance criteria |
| BS A 332:1999 | Aerospace. Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa. Procurement specification |
| BS SP 172:1999 | Rivets, solid, in aluminium or aluminium alloys. Procurement specification |
| NEMA TP 2-2005 | STANDARD TEST METHOD FOR MEASURING THE ENERGY CONSUMPTION OF DISTRIBUTION TRANSFORMERS |
| BS EN 45510-6-1:1998 | Guide for the procurement of power station equipment. Turbine auxiliaries Deaerators |
| BS EN 45510-4-10:2000 | Guide for the procurement of power station equipment. Boiler auxiliaries Flue gas denitrification (De-NOx) plant - Section 10: Flue gas denitrification (De-Nox) plant |
| BS 7011-2.2:1998 | Consumable accessories for light microscopes. Slides Specification for materials and quality of finish |
| BS EN 45510-7-1:2000 | Guide for the procurement of power station equipment. Pipework and valves High pressure piping systems - Section 1: High pressure piping systems |
| DD ENV 50232:1997 | Aeronautical ground lighting electrical installation. Isolating transformer. Equipment specifications and tests |
| BS EN 868-1:1997 | Packaging materials and systems for medical devices which are to be sterilized General requirements and test methods |
| BS EN 45510-3-3:2000 | Guide for the procurement of power station equipment. Boilers Boilers with fluidized bed firing - Section 3: Boilers with fluidised bed firing |
| BS 7520:1995 | Guide to quality assurance plans for tools for live working |
| BS W 14:1999 | Aircraft control wire rope assemblies. Technical specification |
| BS EN ISO 4516:2002 | Metallic and other inorganic coatings. Vickers and Knoop microhardness tests |
| BS EN 45510-8-1:1998 | Guide for the procurement of power station equipment Control and instrumentation |
| BS EN 45510-6-9:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Cooling water systems - Section 9: Cooling water systems |
| VDI 4060 Blatt 1:2005-06 | Integrated Management Systems - Guidance for practical implementation - General information |
| ASTM D 6590/D6590M : 2000 : R2006 | Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans |
| BS EN 45510-4-1:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Equipment for reduction of dust emissions - Equipment for the reduction of dust emissions |
| BS EN 12884:1999 | Biotechnology. Performance criteria for centrifuges |
| BS EN 45510-6-3:1998 | Guide for the procurement of power station equipment. Turbine auxiliaries Condenser plant |
| ASTM D 6123/D6123M : 1997 | Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
| BS EN ISO 9003:1994 | Quality systems. Model for quality assurance in final inspection and test |
| ASTM E 2513 : 2007 : R2012 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
| ASTM D 6787 : 2002 | Standard Specification for Repositionable Note Pad |
| BS 5750-14:1993 | Quality systems Guide to dependability programme management |
| ASTM D 6788 : 2002 : R2012 | Standard Specification for Repositionable Pressure-Sensitive Flags |
| BS ISO 14964:2000 | Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration |
| ASTM D 6123/D6123M : 1997 : R2003 | Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking |
| BS EN 45510-6-7:1998 | Guide for the procurement of power station equipment. Turbine auxiliaries Moisture separator reheaters |
| BS ISO 2020-2:1997 | Aerospace. Preformed flexible steel wire rope for aircraft controls Technical specification |
| BS ISO 13463:1999 | Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel. Guidelines to help in the definition of a product specification |
| BS EN 45510-4-9:2000 | Guide for the procurement of power station equipment. Boiler auxiliaries Sootblowers - Section 9: Sootblowers |
| BS EN 12462:1998 | Biotechnology. Performance criteria for pumps |
| BS EN 45510-6-8:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Cranes - Section 8: Cranes |
| ASTM D 5749 : 2017 : REDLINE | Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing |
| SAEITC TS153-2 | TS153 Performance Specification of Insert Salvage, Imperial, Thinwall Screw Locking, Inconel 718 Silver Coated |
| VDE 0212-1 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| BS EN 30011-1:1993 | Guidelines for auditing quality systems Guidelines for auditing quality systems. Auditing |
| BS EN 45510-5-3:1998 | Guide for the procurement of power station equipment Wind turbines |
| BS EN 45510-7-2:2000 | Guide for the procurement of power station equipment. Pipework and valves Boiler and high pressure valves - Section 2: Boiler and high pressure valves |
| BS EN 60746-2:2003 | Expression of performance of electrochemical analyzers pH value |
| DD ENV ISO 11133-1:2000 | Microbiology of food and animal feeding stuffs. Guidelines on quality assurance and performance testing of culture media General guidelines on quality assurance of culture media in the laboratory |
| BS EN 61229:1996 | Rigid protective covers for live working on a.c. installations |
| BS EN 61481:2001 | Live working. Portable phase comparators for use on voltages from 1 kV to 36 kV a.c. |
| DIN EN 60660 : 2000 | INSULATORS - TESTS ON INDOOR POST INSULATORS OF ORGANIC MATERIAL FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV UP TO BUT NOT INCLUDING 300 KV |
| BS EN 45510-5-1:1998 | Guide for the procurement of power station equipment Steam turbines |
| BS EN 15650:2010 | Ventilation for buildings. Fire dampers |
| BS EN 773:1999 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| BS EN 12094-7:2001 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for nozzles for CO2 systems |
| BS EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery Common requirements |
| BS EN 12885:1999 | Biotechnology. Performance criteria for cell disrupters |
| PD IEC WT 01:2001 | IEC system for conformity testing and certification of wind turbines. Rules and procedures |
| BS A 351:2000 | Rivets, solid, in nickel alloy. Procurement specification |
| BS EN 61243-2:1998 | Live working. Voltage detectors Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
| ASTM E 2513 : 2007 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
| BS EN 1652:1998 | Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
| BS EN 681-4:2000 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements |
| BS EN 45510-4-3:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Draught plant - Draught plant |
| BS EN 1293:1999 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
| BS EN 45510-3-1:2000 | Guide for the procurement of power station equipment. Boilers Water tube boilers - Section 1: Water tube boilers |
| BS A 352:2000 | Rivets, solid, in titanium or titanium alloy. Procurement specification |
| BS EN 1065:1999 | Adjustable telescopic steel props. Product specifications, design and assessment by calculation and tests |
| BS EN 61209:1999 | Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results |
| PD CEN ISO/TR 13881:2011 | Petroleum and natural gas industries. Classification and conformity assessment of products, processes and services |
| PD 6538:1993 | Vision 2000. A strategy for international standards\' implementation in the quality arena during the 1990s |
| BS EN 45510-4-6:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Flue gas desulfurization (De-SO<sub>x</sub>) plant - Flue gas desulphurization (De-SOx) plant |
| ASTM E 2484 : 2008 | Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices |
| BS A 363:2000 | Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
| BS EN 45510-6-6:2000 | Guide for the procurement of power station equipment. Turbine auxiliaries Turbine auxiliaries. Wet and wet/dry cooling towers - Section 6: Wet/dry cooling towers |
| BS EN 61284:1998 | Overhead lines. Requirements and tests for fittings |
| BS EN ISO 9004-1:1994 | Quality management and quality assurance standards. Guidelines |
| BS EN 1758:1998 | Copper and copper alloys. Strip for lead frames |
| I.S. EN ISO 9003:1994 | QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN FINAL INSPECTION AND TEST |
| S.R. CR 14245:2001 | GUIDELINES FOR THE APPLICATION OF EN 197-2 'CONFORMITY EVALUATION' |
| EN 1254-3:1998 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| ISO 9003:1994 | Quality systems Model for quality assurance in final inspection and test |
| I.S. EN 1254-2:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES |
| I.S. EN 1254-5:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES |
| CSA ISO 9004-3 : 1994 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 3: GUIDELINES FOR PROCESSED MATERIALS |
| CSA C61400-2:2008 | WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES |
| CSA ISO 10011-1 : 1994 | GUIDELINES FOR AUDITING QUALITY SYSTEMS - PART 1: AUDITING |
| IEC 61479:2001+AMD1:2002 CSV | Live working - Flexible conductor covers (line hoses) of insulating material |
| CSA C1325 : 1999 : R2011 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| ASTM E 2952 : 2017 : REDLINE | Standard Specification for Air-Purifying Respiratory Protective Smoke Escape Devices (RPED) |
| AAMI HE74 : 2001 | HUMAN FACTORS DESIGN PROCESS FOR MEDICAL DEVICES |
| ISO 4516:2002 | Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
| ISO 12290:2000 | Aerospace — Rivets, solid, in titanium or titanium alloy — Procurement specification |
| ISO 5858:1999 | Aerospace Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C Procurement specification |
| ISO/TR 12662:1997 | Certification scheme for prestressing steels |
| UNE-EN 74-2:2010 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| ISO 14922-1:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 1: Guidance for selection and use |
| ISO 16010:2005 | Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
| ISO 21927-7:2017 | Smoke and heat control systems — Part 7: Smoke ducts sections |
| IEC 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| ISO 8230:1997 | Safety requirements for dry-cleaning machines using perchloroethylene |
| DIN EN 1254-1:1998-03 | Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| ISO/TR 13352:1997 | Guidelines for interpretation of ISO 9000 series for application within the iron ore industry |
| BS ISO 10955:1999 | End-fittings and turnbarrels for aircraft control wire rope. Technical specification |
| EN 50103 : 1995 | GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR THE ACTIVE (INCLUDING ACTIVE IMPLANTABLE) MEDICAL DEVICE INDUSTRY |
| CEI EN 50155 : 2008 | RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| 99/201502 DC : 0 | |
| ASTM D 6787/D6787M : 2002 : R2012 : EDT 1 | Standard Specification for Repositionable Note Pad |
| CSA ISO 9000-2 : 0 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002, AND ISO 9003 |
| 00/243317 DC : DRAFT JUL 2000 | |
| BS ISO 1834:1999 | Short link chain for lifting purposes. General conditions of acceptance |
| UNI EN 1492-2 : 2009 | TEXTILE SLINGS - SAFETY - PART 2: ROUND SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES |
| CSA ISO 9000-4 : 0 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GUIDE TO DEPENDABILITY PROGRAMME MANAGEMENT |
| DIN V VDE 0829-522 : 1994 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 522: TWISTED PAIR CLASS 1; PHYSICAL LAYER |
| BS ISO 9000-2:1997 | Quality management and quality assurance standards Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 |
| UNI EN 1654 : 1999 | COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS |
| CSA ISO 9004-2 : 0 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 2: GUIDELINES FOR SERVICES |
| BS ISO 8009-1:1997 | Reusable rubber contraceptive diaphragms Classification, sampling and requirements |
| EN 100114-1 : 1996 | RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURES - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION |
| BS 5750-8:1991 | Quality systems Guide to quality management and quality systems elements for services |
| BS EN 61207-3:2002 | Expression of performance of gas analyzers Paramagnetic oxygen analyzers |
| UNI EN 1652 : 1999 | COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
| ASTM E 2066 : 2000 : R2007 | Standard Guide for Validation of Laboratory Information Management Systems (Withdrawn 2015) |
| BS EN 45510-2-9:2008 | Guide for procurement of power station equipment Electrical equipment. Cabling systems |
| UNI EN 15644 : 2009 | TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS |
| ASTM D 6787/D6787M : 2002 : R2017 | Standard Specification for Repositionable Note Pad |
| PD 3542:1991 | The role of standards in company quality management |
| BS ISO 14654:1999 | Epoxy-coated steel for the reinforcement of concrete |
| DD ENV 61111:2002 | Matting of insulating material for electrical purposes |
| DD ENV 61112:2002 | Blankets of insulating material for electrical purposes |
| EN 45510-4-2:1999 | Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 2: Gas-air, steam-air and gas-gas heaters |
| ASTM E 1884 : 1997 | Standard Guide for General Requirements for Bodies Operating Assessment and Certification/Registration of Quality Systems (Withdrawn 2004) |
| EN 45510-6-7:1998 | Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters |
| BS ISO 21927-8:2017 | Smoke and heat control systems Smoke control dampers |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 02/121978 DC : DRAFT APR 2002 | ISO/DIS 23711 - ELASTOMERIC SEALS - REQUIREMENTS FOR MATERIALS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - THERMOPLASTIC ELASTOMERS |
| EN 45510-6-1:1998 | Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries - Deaerators |
| UNI EN 12101-7 : 2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS |
| EN 45510-6-3:1998 | Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant |
| UNI EN 15650 : 2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| EN 45510-8-1:1998 | Guide for procurement of power station equipment - Part 8-1: Control and instrumentation |
| DD ENV 13459-2:1999 | Road marking. Materials. Quality control Guidelines for preparing quality plans for materials application |
| EN 45510-5-1:1998 | Guide for procurement of power station equipment - Part 5-1: Steam turbines |
| 96/108457 DC : DRAFT NOV 1996 | PREN 12650-2 - BUILDING HARDWARE - POWERED PEDESTRIAN DOORS - PART 2: SAFETY AT POWERED PEDESTRIAN DOORS |
| UNI EN 1492-1 : 2009 | TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES |
| 04/30112025 DC : DRAFT APR 2004 | ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
| EN 45510-5-4:1998 | Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage pumps and pump-turbines |
| EN 45510-5-2:1998 | Guide for procurement of power station equipment - Part 5-2: Gas turbines |
| UNI EN ISO 10472-1 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| BS ISO 21927-7:2017 | Smoke and heat control systems Smoke ducts sections |
| API 683 : 1993 | QUALITY IMPROVEMENT MANUAL FOR MECHANICAL EQUIPMENT IN PETROLEUM, CHEMICAL, AND GAS INDUSTRIES |
| EN 45510-4-9:1999 | Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries - Sootblowers |
| 07/30162629 DC : 0 | BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| EN 45510-1:1997 | Guide for procurement of power station equipment - Part 1: Common clauses |
| UNI EN 1677-5 : 2009 | COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4 |
| UNI CEI EN 45510-4-10 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - FLUE GAS DENITRIFICATION (DE-NOX) PLANT |
| UNI EN 74-2 : 2009 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| UNI EN 12101-8 : 2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
| ASTM E 2066 : 2000 | Standard Guide for Validation of Laboratory Information Management Systems |
| I.S. EN 74-2:2008 | COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES |
| 99/123581 DC : DRAFT OCT 1999 | ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS |
| 00/709747 DC : 0 | ISO/DIS 16049-2 - AIR CARGO EQUIPMENT - RESTRAINT STRAPS - PART 2: UTILIZATION GUIDELINES AND LASHING CALCULATIONS |
| 94/110814 DC : DRAFT JAN 1995 | ISO/DIS 12576 - THERMAL INSULATING MATERIALS AND PRODUCTS FOR BUILDINGS - CONFORMITY CONTROL SYSTEMS |
| EN 45510-6-2:1998 | Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries - Feedwater heaters |
| 96/108458 DC : DRAFT NOV 1996 | PREN 12650-1 - BUILDING HARDWARE - POWERED PEDESTRIAN DOORS - PART 1: PRODUCT REQUIREMENTS AND TEST METHODS |
| 99/201503 DC : 0 | IEC 61479 ED.1 - LIVE WORKING - CONDUCTOR COVERS (LINE HOSES) OR INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| 03/318309 DC : DRAFT OCT 2003 | IEC 61196-1-1 - COAXIAL COMMUNICATION CABLES - PART 1-1: CAPABILITY APPROVAL FOR COAXIAL COMMUNICATION CABLES - GENERIC SPECIFICATION |
| 00/243316 DC : DRAFT JUL 2000 | IEC 60494-1 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINE VEHICLES |
| I.S. EN 2000:1992 | AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - APPROVAL OF THE QUALITY SYSTEM OF MANUFACTURERS |
| I.S. CR ISO 17663:2001 | WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES |
| EN 1254-5:1998 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| DIN EN 1254-4:1998-03 | Copper and copper alloy plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| BS EN 1254-3:1998 | Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with plastics pipes |
| ISO 9004-1:1994 | Quality management and quality system elements Part 1: Guidelines |
| CSA C61400-2 : 2008 : R2013 | WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES |
| CSA CEI/IEC 1258 : 1998 | GUIDELINES FOR THE DEVELOPMENT AND USE OF MEDICAL ELECTRICAL EQUIPMENT EDUCATIONAL MATERIALS |
| CSA ISO 11134 : 0 | STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS FOR VALIDATION AND ROUTINE CONTROL - INDUSTRIAL MOIST HEAT STERILIZATION |
| DIN EN 12101-8:2011-08 | Smoke and heat control systems - Part 8: Smoke control dampers |
| DIN EN ISO 10472-1:2009-10 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| DIN EN 12101-7:2011-08 | Smoke and heat control systems - Part 7: Smoke duct sections |
| UNE-EN 12101-7:2013 | Smoke and heat control systems - Part 7: Smoke duct sections |
| EN 45510-2-9 : 2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| EN 61854:1998 | Overhead lines - Requirements and tests for spacers |
| SAE AS4959A | Bolts and Screws, Steel, UNS S66286 Tensile Strength 140 ksi 1650 °F Solution Heat Treatment Aged Before Fillet and Thread Rolling Procurement Specification |
| EN 61481:2001/A2:2005 | LIVE WORKING - PORTABLE PHASE COMPARATORS FOR USE ON VOLTAGES FROM 1 KV TO 36 KV A.C. |
| DIN ISO 2859-3:2007-10 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 3: SKIP-LOT SAMPLING PROCEDURES |
| EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures |
| BS EN 13085:2001 | Wallcoverings. Specification for cork rolls |
| BS EN 60870-5-6:2009 | Marine energy. Wave, tidal and other water current converters Scale testing of tidal stream energy systems |
| EN 1758:1997 | Copper and copper alloys - Strip for lead frames |
| BS EN 60966-1:1999 | Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods |
| EN ISO 4516:2002 | Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
| BS EN 12322:1999 | In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media |
| IEC WT 01:2001 | IEC System for Conformity Testing and Certification of Wind Turbines - Rules and procedures |
| EN ISO 15541:2001 | Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999) |
| EN ISO 13488 : 2000 | QUALITY SYSTEMS - MEDICAL DEVICES - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF EN ISO 9002 |
| EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| EN ISO 9004-1 : 1994 | QUALITY SYSTEMS - PRINCIPAL CONCEPTS AND APPLICATIONS - GUIDE TO QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS |
| EN ISO 10007 : 1996 | QUALITY MANAGEMENT - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| BS EN 10242:1995 | Threaded pipe fittings in malleable cast iron |
| EN 1492-2:2000+A1:2008 | Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use |
| EN ISO 8230 : 1997 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
| EN 15644:2008 | Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements |
| EN ISO 9000-1 : 1994 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 1: GUIDELINES FOR SELECTION AND USE (ISO 9000-1:1994) |
| IEC 61209:1999 | Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results |
| EN ISO/IEC 15416:2001 | Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols (ISO/IEC 15416:2000) |
| BS EN 12781:2001 | Wallcoverings. Specification for cork panels |
| EN 3207:1998 | Aerospace series - Rubber compounds - Technical specification |
| EN 1492-1:2000+A1:2008 | Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use |
| BS 5750-4:1990 | Quality systems Guide to the use of BS 5750:Part 1 \'Specification for design/development, production, installation and servicing\', Part 2 \'Specification for production and installation\' and Part 3 \'Specification for final inspection and test\' |
| EN 2000:1991 | Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers |
| EN ISO 9003:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR FINAL INSPECTION AND TEST |
| UNE-EN 15650:2010 | Ventilation for buildings - Fire dampers |
| EN 15650:2010 | Ventilation for buildings - Fire dampers |
| DIN EN 9000-1:2000-09 (Draft) | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 1: REQUIREMENTS APPLICABLE TO SUPPLIERS |
| I.S. EN 45012:1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| I.S. EN ISO 8230:1998 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
| DIN ISO 13411:1996-12 (Draft) | AEROSPACE - AIRFRAME ROLLING BEARINGS - NEEDLE ROLLER, NEEDLE TRACK ROLLER AND CYLINDRICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| BS EN 1254-5:1998 | Copper and copper alloys. Plumbing fittings Fittings with short ends for capillary brazing to copper tubes |
| ISO 9000-2:1997 | Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 |
| I.S. EN 556-1:2002 | STERILISATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED STERILE - PART 1: REQUIREMENTS FOR TERMINALLY STERILISED MEDICAL DEVICES |
| CSA C61400-2 : 2008 : R2018 | WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES |
| CSA C62155:2006 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| CSA C62155 : 2006 : R2015 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| EN ISO 14922-1:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999) |
| EN ISO 14922-3:1999 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999) |
| UNE-EN 12101-8:2015 | Smoke and heat control systems - Part 8: Smoke control dampers |
| ENV 50232 : 1997 | AVIATION GROUND LIGHTING ELECTRICAL INSTALLATION - ISOLATING TRANSFORMER: EQUIPMENT SPECIFICATIONS AND TESTS |
| IEC 61192-1:2003 | Workmanship requirements for soldered electronic assemblies - Part 1: General |
| CR 14245:2001 | Guidelines for the application of EN 197-2 "Conformity Evaluation" |
| DIN EN ISO 4516:2002-10 | Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
| BS EN 556-1:2001 | Sterilization of medical devices. Requirements for medical devices to be designated \'STERILE\' Part 1. Requirements for terminally sterilized medical devices |
| EN 61897:1998 | Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers |
| SAE AS7115A | National Aerospace and Defense Contractors Accreditation Program Requirements for Elastomer Seals |
| BS EN 74-2:2008 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures |
| EN 45510-4-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - GAS-AIR, STEAM AIR AND GAS-GAS HEATERS |
| EN 45510-8-1:1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 8-1: CONTROL AND INSTRUMENTATION |
| SAE J2911_201711 | Procedure for Certification that Requirements for Mobile Air Conditioning System Components, Service Equipment, and Service Technician Training Meet SAE J Standards |
| EN 61243-2:1997/A2:2002 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| EN 61192-2:2003 | Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mount assemblies |
| EN 1074-1:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements |
| EN 13380:2001 | General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
| IEC 61189-3:2007 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
| EN 61325:1995 | Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria |
| EN 45510-6-1 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-1: TURBINE AUXILIARIES - DEAERATORS |
| EN 45510-6-7 : 1998 | Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters |
| EN 12101-8:2011 | Smoke and heat control systems - Part 8: Smoke control dampers |
| EN 1065:1998 | Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests |
| EN 45510-6-3 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-3: TURBINE AUXILIARIES - CONDENSER PLANT |
| EN 45510-5-1 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-1: STEAM TURBINES |
| IEC 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| EN 61192-1:2003 | Workmanship requirements for soldered electronic assemblies - Part 1: General |
| EN 45510-4-9 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-9: BOILER AUXILIARIES - SOOTBLOWERS |
| SAE ARP5595B | Cargo Restraint Straps – Utilization Guidelines |
| BS EN 12569:1999 | Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests |
| DIN EN 12890 : 2002-05 | FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
| EN 13085:2001 | Wallcoverings - Specification for cork rolls |
| DIN EN 12279:2005-12 | GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS |
| SAE AS7200/1B | National Aerospace and Defense Contractors Accreditation Program (Nadcap) Audit and Inspection Procedures and Checklists for the Sealant Manufacturers Accreditation Program |
| BS EN 1254-2:1998 | Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes |
| IEC TR 61334-1-2:1997 | Distribution automation using distribution line carrier systems - Part 1-2: General considerations - Guide for specification |
| IEC 60870-5-6:2006 | Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards |
| EN 61207-3:2002 | Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| EN 60746-2:2003 | Expression of performance of electrochemical analyzers - Part 2: pH value |
| CLC/TS 61111:2006 | Matting of insulating material for electrical purposes |
| EN 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
| IEC 61192-2:2003 | Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mount assemblies |
| I.S. EN 12781:2001 | WALLCOVERINGS - SPECIFICATION FOR CORK PANELS |
| I.S. EN ISO 10007:1997 | QUALITY MANAGEMENT - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| DIN EN 45012:1990-05 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| DIN EN 729-3:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 3: STANDARD QUALITY REQUIREMENTS |
| I.S. ISO 9000-2:1994 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 2: GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002 AND ISO 9003 |
| DIN V ENV 1452-7:2001-03 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| XP PREN 2943 : 1992 XP | AEROSPACE SERIES - WIRE THREAD INSERTS, PREVAILING TORQUE (SELF-LOCKING) - TECHNICAL SPECIFICATION |
| I.S. EN 61192-2:2003 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - SURFACE-MOUNT ASSEMBLIES |
| I.S. EN 61854:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| PREN 3152 : 200P1 | AEROSPACE SERIES - PROPULSION STANDARDS PARTS NUTS, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/425 DEGREES C - TECHNICAL SPECIFICATION |
| S.R. CEN ISO TR 13881:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - CLASSIFICATION AND CONFORMITY ASSESSMENT OF PRODUCTS, PROCESSES AND SERVICES |
| I.S. ISO 9004-2:1994 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 2: GUIDELINES FOR SERVICES |
| PREN 3389 : 200P1 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| DIN EN 729-1:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 1: GUIDELINES FOR SELECTION AND USE |
| NASA KSC STD E 0021 : 2002 | KSC TELECOMMUNICATION PREMISES DISTRIBUTION SYSTEMS, DESIGN OF, STANDARD FOR |
| BS 5781-1(1992) : AMD 8147 | QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT |
| DIN EN 729-2:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS |
| PREN 9000-3 : 200P2 | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 3: REQUIREMENTS APPLICABLE TO STOCKISTS-DISTRIBUTORS |
| I.S. EN 61481:2001 | LIVE WORKING - PORTABLE PHASE COMPARATORS FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| I.S. EN 1092-2:1997 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 2: CAST IRON FLANGES |
| API 1512 : 1995 | PETROLEUM TEST LABORATORY ACCREDITATION PROGRAM |
| I.S. EN 61189-3:2008 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS) |
| BS 4778-1:1987 | Quality vocabulary International terms |
| DIN ISO 9152:2005-11 | AEROSPACE - BOLTS, WITH MJ THREADS, IN TITANIUM ALLOYS, STRENGTH CLASS 1100 MPA - PROCUREMENT SPECIFICATION |
| PREN 3388 : 200P1 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| XP PREN 9000-1 : 1999 XP | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 1: REQUIREMENTS APPLICABLE TO SUPPLIERS |
| TR 3040-1 : 5 | AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - PART 1 - LIST OF APPROVED MANUFACTURERS |
| I.S. EN 61192-1:2003 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - GENERAL |
| PD CR 14245:2001 | Guidelines for the application of EN 197-2. Conformity Evaluation |
| I.S. EN 61897:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| PREN 9000-2 : 200P2 | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 2: REQUIREMENTS APPLICABLE TO MAINTENANCE ORGANIZATIONS |
| DIN EN 729-4:1994-11 | QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - PART 4: ELEMENTARY QUALITY REQUIREMENTS |
| XP PREN 9000-2 : 1999 XP | AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 2: REQUIREMENTS APPLICABLE TO MAINTENANCE ORGANIZATIONS |
| I.S. ISO 10013:1995 | GUIDELINES FOR DEVELOPING QUALITY MANUALS |
| I.S. ISO 9004-3:1994 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 3: GUIDELINES FOR PROCESSED MATERIALS |
| DIN V ENV 61400-1 : 1996 | WIND TURBINE GENERATOR SYSTEMS - PART 1: SAFETY REQUIREMENTS |
| ISO 10011-3:1991 | Guidelines for auditing quality systems Part 3: Management of audit programmes |
| ISO 10011-1:1990 | Guidelines for auditing quality systems Part 1: Auditing |
| ISO 10013:1995 | Guidelines for developing quality manuals |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| ISO 9000-2:1997 | Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 |
| ISO/TR 13425:2006 | Guidelines for the selection of statistical methods in standardization and specification |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9003:1994 | Quality systems Model for quality assurance in final inspection and test |
| ISO 10012-1:1992 | Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment |
| ISO 9000-1:1994 | Quality management and quality assurance standards — Part 1: Guidelines for selection and use |
| ISO 9000-3:1997 | Quality management and quality assurance standards Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software |
| ISO 10011-2:1991 | Guidelines for auditing quality systems — Part 2: Qualification criteria for quality systems auditors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.