ISO 898-7:1992
Current
Current
The latest, up-to-date edition.
Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
12-11-1992
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Applies to bolts and screws of property classes 8.8 to 12.9 in accordance with ISO 898-1 with thread less than M3 for which no breaking and proof loads are indicated in ISO 898-1, as well as to short bolts and screws with nominal diameters 3 mm to 10 mm which cannot be subjected to a tensile test. The minimum breaking torques are not valid for hexagon socket set screws.
| DevelopmentNote |
Also numbered as BS EN 20898-7. (09/2005)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 20898-7:1995-04 | Identical |
| NF EN 20898-7 : 1995 | Identical |
| NBN EN 28839 : 1992 | Identical |
| SAC GB/T 3098.13 : 1996 | Identical |
| UNE-EN 20898-7:1996 | Identical |
| NBN EN 20898-7 : 1995 | Identical |
| NS ISO 898-7 : 1ED 1995 | Identical |
| SN EN 20898-7 : 1995 | Identical |
| EN 20898-7:1995 | Identical |
| AS 4291.7-2000 | Identical |
| GOST R ISO 898-7 : 2009 | Identical |
| NEN ISO 898-7 : 1995 | Identical |
| I.S. EN 20898-7:1995 | Identical |
| BIS IS 1367-20 : 1996(R2001) | Identical |
| PN EN 20898-7 : 1997 | Identical |
| JIS B 1058:1995 | Identical |
| BS 7814:1995 | Specification for bolts and screws incorporating either underhead locking or anti-rotation features |
| PD ISO/TS 18130:2016 | Dentistry. Screw loosening test using cyclic torsional loading for implant body/implant abutment connection of endosseous dental implants |
| ISO 16840-3:2014 | Wheelchair seating — Part 3: Determination of static, impact and repetitive load strengths for postural support devices |
| 16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| UNE-EN ISO 898-1:2015 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| 13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| BS ISO 16840-3:2014 | Wheelchair seating Determination of static, impact and repetitive load strengths for postural support devices |
| 06/30151815 DC : 0 | BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS |
| PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| UNI EN ISO 2702 : 2011 | HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| ISO 14625:2007 | Space systems — Ground support equipment for use at launch, landing or retrieval sites — General requirements |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
| UNE-EN ISO 2702:2011 | Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) |
| I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| I.S. EN ISO 2702:2011 | HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
| I.S. EN ISO 898-1:2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| DD ISO/TS 13498:2011 | Dentistry. Torsion test of implant body/connecting part joints of endosseous dental implant systems |
| DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| 06/19976237 DC : DRAFT MAY 2006 | |
| BS Z 100:1999 | Space systems. Ground support equipment for use at launch, landing, or retrieval sites. General requirements |
| BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
| ISO 2702:2011 | Heat-treated steel tapping screws — Mechanical properties |
| UNI EN ISO 898-1 : 2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| ISO/TS 13498:2011 | Dentistry — Torsion test of implant body/connecting part joints of endosseous dental implant systems |
| 13/30275212 DC : 0 | BS ISO 16840-3 - WHEELCHAIR SEATING - PART 3: DETERMINATION OF STATIC, IMPACT AND REPETITIVE LOAD STRENGTHS FOR POSTURAL SUPPORT DEVICES |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| BS ISO 14625:2007 | Space systems. Ground support equipment for use at launch, landing or retrieval sites. General requirements |
| 13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| ISO/TR 18130:2016 | Dentistry Screw loosening test using cyclic torsional loading for implant body/implant abutment connection of endosseous dental implants |
| BS EN 28839:1992 | Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
| UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| BS EN ISO 2702:2011 | Heat-treated steel tapping screws. Mechanical properties |
| EN 28839:1991 | Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986) |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| EN ISO 2702:2011 | Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) |
| 09/30208233 DC : 0 | BS ISO 2702 - HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
| PREN ISO 2702 : DRAFT 2009 | HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
| 03/311846 DC : DRAFT AUG 2003 | BS ISO 16840-3 - WHEELCHAIR SEATING - PART 3: POSTURAL SUPPORT DEVICES - MEASUREMENT OF STATIC, IMPACT AND REPETITIVE LOAD STRENGTHS |
| IS 1367 : Part 3 : 2017 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
| PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
| DIN EN ISO 2702:2011-08 | Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.