ISO 844:2014
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Rigid cellular plastics Determination of compression properties
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
23-04-2021
Superseded by
Language(s)
French, English
Published date
21-07-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 844:2014 specifies a method of determining a) the compressive strength and corresponding relative deformation, or b) the compressive stress at 10 % relative deformation, and c) when desired, the compressive modulus of rigid cellular plastics.
There are two procedures:
- Procedure A employs crosshead motion for determination of compressive properties. Procedure A is intended to be used when compressive stress at 10 % relative deformation has to be determined.
- Procedure B employs strain measuring devices mounted on the specimen (contact extensometer) or similar device which measures directly sample deformation. Procedure B is intended to be used when compressive modulus has to be determined.
| DevelopmentNote |
Supersedes ISO/DIS 844. (07/2014)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 844 : 2014 | Identical |
| DIN EN ISO 844:2014-11 | Identical |
| NF EN ISO 844 : 2014 | Identical |
| NBN EN ISO 844 : 2014 | Identical |
| NEN EN ISO 844 : 2014 | Identical |
| NS EN ISO 844 : 2014 | Identical |
| I.S. EN ISO 844:2014 | Identical |
| PN EN ISO 844 : 2014 | Identical |
| SN EN ISO 844 : 2014 | Identical |
| UNI EN ISO 844 : 2014 | Identical |
| UNE-EN ISO 844:2015 | Identical |
| BS EN ISO 844:2014 | Identical |
| EN ISO 844:2014 | Identical |
| SNV ISO 844 : 1998 | Identical |
| DIN 53421:1984-06 | Corresponds |
| BS ISO 844 : 2007 | Identical |
| NEN ISO 844 : 2007 | Identical |
| ISO 20392:2007 | Thermal-insulating materials Determination of compressive creep |
| UNI EN ISO 12215-5 : 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| I.S. EN 16245-5:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 5: SPECIFIC REQUIREMENTS FOR CORE MATERIALS |
| ISO 12215-2:2002 | Small craft — Hull construction and scantlings — Part 2: Materials: Core materials for sandwich construction, embedded materials |
| UNI EN 16245-5 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 5: SPECIFIC REQUIREMENTS FOR CORE MATERIALS |
| ISO 21844:2018 | Cellular plastic — Cellulose foam thermal insulation — Material specification |
| I.S. EN ISO 12215-2:2002 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 2: MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS |
| EN ISO 12215-2:2002 | Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
| I.S. EN 253:2009 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN 14620-4:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Insulation components |
| DIN EN ISO 12215-2:2002-09 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLING - MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS |
| EN 117:2012 | Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
| CSA Z245.20 SERIES : 2014 | PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE |
| BS EN 16245-5:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for core materials |
| 17/30342710 DC : 0 | BS EN ISO 12215-5 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| 15/30330892 DC : 0 | BS ISO 9349 - PREINSULATED DUCTILE IRON PIPELINE SYSTEMS |
| 05/30136084 DC : DRAFT JUL 2005 | ISO 12575-3 - THERMAL INSULATION - EXTERIOR INSULATING SYSTEMS FOR FOUNDATIONS - PART 3: TEST METHODS |
| I.S. EN ISO 12736:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| BS EN 253 : 2009 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| I.S. EN 117:2012 | WOOD PRESERVATIVES - DETERMINATION OF TOXIC VALUES AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
| DIN EN ISO 12215-5:2014-10 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014) |
| 11/30187339 DC : 0 | BS EN ISO 12736 - PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES |
| NF EN ISO 12215-5 : 2008 AMD 1 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| 07/30168488 DC : 0 | BS EN 253 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| 03/105151 DC : DRAFT MAR 2003 | PREN 14620-4 - DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED STEEL TANKS FOR THE STORAGE OF REFRIGERATED, LIQUEFIED GASES WITH OPERATING TEMPERATURES BETWEEN -5 DEGREES C AND -165 DEGREES C - PART 4: INSULATION COMPONENTS |
| BS EN ISO 12215-5 : 2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| ISO 4898:2010 | Rigid cellular plastics Thermal insulation products for buildings Specifications |
| DIN EN 117:2013-01 | Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
| BS EN 117:2012 | Wood preservatives. Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
| UNE-EN ISO 12215-5:2008 | Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) |
| UNI EN 117 : 2013 | WOOD PRESERVATIVES - DETERMINATION OF TOXIC VALUES AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
| BS EN ISO 12736:2014 | Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| DIN EN 16245-5:2013-08 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials |
| 11/30239986 DC : DRAFT MAR 2011 | BS EN 16245-5 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 5: SPECIFIC REQUIREMENTS FOR CORE MATERIALS |
| 02/709771 DC : DRAFT AUG 2002 | ISO/DIS 9349 - PREINSULATED DUCTILE IRON PIPELINE SYSTEMS |
| 05/30141298 DC : DRAFT NOV 2005 | ISO 20392 - RIGID CELLULAR PLASTICS - DETERMINATION OF COMPRESSIVE CREEP |
| 05/30129203 DC : DRAFT FEB 2005 | ISO/DIS 12575-1 - THERMAL INSULATION - EXTERIOR INSULATING SYSTEMS FOR FOUNDATIONS - PART 1: SPECIFICATION |
| BS ISO 21844:2018 | Cellular plastic. Cellulose foam thermal insulation. Material specification |
| UNE-EN 16245-5:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials |
| 12/30255696 DC : 0 | BS EN 117 - WOOD PRESERVATIVES - DETERMINATION OF TOXIC VALUES AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
| 03/307371 DC : DRAFT MAY 2003 | BS EN 117 - WOOD PRESERVATIVES - DETERMINATION OF TOXIC VALUES AGAINST EUROPEAN RETICULITERMES SPECIES (LABORATORY METHOD) |
| ISO 12215-5:2008 | Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination |
| ISO 8873-1:2006 | Rigid cellular plastics — Spray-applied polyurethane foam for thermal insulation — Part 1: Material specifications |
| NF EN ISO 12215-2 : 2002 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 2: MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS |
| ONORM EN ISO 12215-5 : 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014) |
| ASTM D 1621 : 2016 : REDLINE | Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
| I.S. EN ISO 12215-5:2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008) |
| DIN EN 253:2015-12 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN 976-1:1997 | Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels Requirements and test methods for single wall tanks |
| ISO 12736:2014 | Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| UNE-EN 117:2012 | Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
| ONORM EN 253 : 2015 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| EN 976-1:1997 | Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks |
| EN 253:2009+A2:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
| EN 16245-5:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials |
| EN ISO 12736:2014 | Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
| EN 14620-4:2006 | Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 4: Insulation components |
| PREN 117 : DRAFT 2012 | WOOD PRESERVATIVES - DETERMINATION OF TOXIC VALUES AGAINST RETICULITERMES SPECIES (EUROPEAN TERMITES) (LABORATORY METHOD) |
| 17/30350989 DC : 0 | BS ISO 21844 - CELLULAR PLASTIC - CELLULOSE FOAM THERMAL INSULATION - MATERIAL SPECIFICATION |
| BS ISO 9349:2017 | Ductile iron pipes, fittings, accessories and their joints. Thermal preinsulated products |
| 05/19970897 DC : 0 | BS ISO 4898 - RIGID CELLULAR PLASTICS - THERMAL INSULATION PRODUCTS FOR BUILDINGS - SPECIFICATIONS |
| ISO 9349:2017 | Ductile iron pipes, fittings, accessories and their joints — Thermal preinsulated products |
| BS EN ISO 12215-2:2002 | Small craft. Hull construction and scantlings Materials. Core materials for sandwich construction, embedded materials |
| ONORM EN ISO 12736 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| ISO 1923:1981 | Cellular plastics and rubbers — Determination of linear dimensions |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.