ISO 813:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
17-07-2019
Superseded by
Language(s)
English, French
Published date
10-05-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 813:2016 specifies a method for the determination of the adhesive strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate, using a test piece comprising a strip of rubber bonded to a single plate of rigid material. The test is carried out at a peel angle of 90.
The method is applicable primarily to test pieces prepared in the laboratory under standard conditions, such as can be used to provide data for the choice of rubber compounds or adhesive systems, the development of such materials and the control of manufacturing processes.
This method is not suitable for high-hardness rubbers, typically above 85 IRHD.
| DevelopmentNote |
Supersedes ISO/DIS 813. (05/2016)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| IS 3400 : Part 14 : Sec 1 : 2021 | Identical |
| BS ISO 813:2016 | Identical |
| NF ISO 813 : 2016 | Identical |
| UNI ISO 813:2016 | Identical |
| NEN ISO 813 : 2016 | Identical |
| UNI ISO 813 : 2011 | Identical |
| NBN ISO 813 : 2003 | Identical |
| DIN 53531-1:1990-10 | Corresponds |
| NBN T 31 008 : 1988 | Identical |
| 09/30181563 DC : 0 | BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| BS EN 15566:2016 | Railway applications. Railway rolling stock. Draw gear and screw coupling |
| BS ISO 24453:2008 | Rubber. Acquisition and presentation of comparable single-point data |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
| BS EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
| DIN EN 14879-4:2008-01 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 10245-3:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| 03/308001 DC : DRAFT JUNE 2003 | ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS |
| BS ISO 6446:1994 | Rubber products. Bridge bearings. Specification for rubber materials |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| 17/30334044 DC : 0 | BS ISO 22762-1 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 1: TEST METHODS |
| EN IEC 61730-2:2018/AC:2018-06 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016) |
| I.S. EN ISO 12736:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| ISO 4632-1:1982 | Rubber, vulcanized Classification Part 1: Description of the classification system |
| I.S. EN 10245-3:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| I.S. EN 15566:2016 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| 04/30109201 DC : DRAFT OCT 2004 | EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| PREN 15566 : DRAFT 2013 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| IEC 61730-2:2016 | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
| BS EN 10245-3:2011 | Steel wire and wire products. Organic coatings on steel wire PE coated wire |
| UNI EN 10245-3 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| BS 903-3:2003 | Physical testing of rubber Acquisition and presentation of comparable single-point data |
| BS EN ISO 12736:2014 | Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| 07/30161672 DC : 0 | BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA |
| 13/30241415 DC : 0 | BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| BS EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
| UNE-EN 10245-3:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| ISO 12736:2014 | Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| EN ISO 12736:2014 | Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
| EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| UNE-EN 15566:2017 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| BS ISO 22762-1:2005 | Elastomeric seismic-protection isolators Test methods |
| BS EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
| ISO 6446:1994 | Rubber products — Bridge bearings — Specification for rubber materials |
| I.S. EN IEC 61730-2:2018 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING |
| ISO 22762-1:2010 | Elastomeric seismic-protection isolators Part 1: Test methods |
| ISO 24453:2008 | Rubber Acquisition and presentation of comparable single-point data |
| DIN EN 14879-5:2007-10 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| DIN EN 10245-3:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire; German version EN 10245-3:2011 |
| IEC 61730-2:2016 RLV | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
| ONORM EN ISO 12736 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.