ISO 8033:2016
Current
Current
The latest, up-to-date edition.
Rubber and plastics hoses Determination of adhesion between components
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
13-12-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 8033:2016 specifies methods for the determination of the adhesion between lining and reinforcement, between cover and reinforcement, between reinforcement layers, between cover and outer lamination (thin layer of material outside the cover for protection) and between lining and inner lamination (thin layer of material inside the lining to reduce permeation of fluid into the lining). It covers all bore sizes and the following types of hose construction:
- woven textile fabric;
- braided textile fabric;
- knitted textile fabric;
- circular-woven textile fabric;
- textile spiral;
- textile cord;
- wire braid;
- wire spiral;
- hoses containing a supporting helix.
Adequate adhesion between the various components of a hose is essential if it is to perform satisfactorily in service.
| DevelopmentNote |
Supersedes ISO/DIS 8033. (12/2016)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IS 443 : Part 7 : 2022 | Identical |
| IS 3400 : Part 24 : 2021 | Identical |
| NEN EN ISO 8033 : 2017 | Identical |
| NS EN ISO 8033 : 2017 | Identical |
| I.S. EN ISO 8033:2017 | Identical |
| PN EN ISO 8033 : 2017 | Identical |
| SN EN ISO 8033 : 2017 | Identical |
| UNI EN ISO 8033 : 2006 | Identical |
| UNI EN ISO 8033:2017 | Identical |
| SS-EN ISO 8033:2017 | Identical |
| UNE-EN ISO 8033:2017 | Identical |
| BS EN ISO 8033:2017 | Identical |
| EN ISO 8033:2017 | Identical |
| NF EN ISO 8033 : 2017 | Identical |
| DIN EN ISO 8033:2015-10 (Draft) | Identical |
| NEN ISO 8033 : 1993 | Identical |
| UNE-EN 28033:1995 | Identical |
| I.S. EN 28033:1993 | Identical |
| DIN EN 28033:1993-07 | Corresponds |
| GOST ISO 8033 : 2016 | Identical |
| BS EN 28033:1993 | Identical |
| NS ISO 8033 : 1ED 1993 | Identical |
| BIS IS 3400-24 : 2012 | Identical |
| BS 5173-103.1(1986) : 1986 | Identical |
| EN 28033 : 1993 | Identical |
| DIN EN ISO 8033:2006-11 | Identical |
| ISO 4642-1:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systems |
| BS ISO 4639-2:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxygenated fuels |
| ISO 4642-2:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
| BS ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification |
| 07/30162632 DC : 0 | BS ISO 4642-2 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 2: SEMI-RIGID HOSES (AND HOSE ASSEMBLIES) FOR PUMPS AND VEHICLES |
| BS ISO 3861 : 1995 AMD 9705 | RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
| 11/30238916 DC : 0 | BS ISO 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| ONORM EN 15807 : 2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| BS ISO 19385:2017+A1:2019 | Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications - Specification |
| 07/30162629 DC : 0 | BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| 08/30165015 DC : DRAFT FEB 2008 | BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION |
| 09/30194969 DC : 0 | BS ISO 11237 - RUBBER HOSES AND HOSE ASSEMBLIES - COMPACT WIRE-BRAID REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| BS ISO 28017:2009 | Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification |
| ISO 11759:1999 | Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification |
| 03/311277 DC : DRAFT JAN 2004 | ISO 3862-2 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
| 07/30150928 DC : 0 | BS ISO 5771 - RUBBER HOSE AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
| 15/30317657 DC : 0 | BS EN ISO 2398 - RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
| ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification |
| BS ISO 19013-2:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels |
| BS EN ISO 18752:2016 | Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification |
| 05/30129301 DC : DRAFT FEB 2005 | ISO/DIS 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-REINFORCED CONSTANT-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| DIN EN ISO 3821:2016-10 (Draft) | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| PREN 13483 : DRAFT 2011 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| BS EN ISO 1825:2017 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification |
| BS ISO 18752 : 2014 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| 09/30195768 DC : 0 | BS ISO 6224 - THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| ISO 3862:2017 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids Specification |
| I.S. EN 15889:2011 | FIRE-FIGHTING HOSES - TEST METHODS |
| ISO 1823:2015 | Rubber hose and hose assemblies for oil suction and discharge service Specification |
| BS ISO 23297:2017 | Thermoplastic hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification |
| ISO 5772:2015 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification |
| ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels |
| ISO 11237-2:2006 | Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 2: Water-based fluid applications |
| I.S. EN ISO 3821:2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| UNE-EN 16436-1:2014 | Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
| ISO 4079-2:2005 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| UNE-EN 856:2015 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| I.S. EN ISO 1403:2008 | RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| DIN EN 1947:2014-09 | FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| DIN EN 13483:2013-09 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| BS EN 13482:2013 | Rubber hoses and hose assemblies for asphalt and bitumen. Specification |
| BS EN 1765:2004 | Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies |
| BS EN 559:2003 | Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
| BS EN ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam. Specification |
| UNE-EN ISO 6224:2012 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
| UNE-EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| BS EN 857:2015 | Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification |
| BS EN ISO 5774:2016 | Plastics hoses. Textile-reinforced types for compressed-air applications. Specification |
| BS EN ISO 14557 : 2002 | FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
| BS EN 14540:2014 | Fire-fighting hoses. Non-percolating layflat hoses for fixed systems |
| I.S. EN 854:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| DIN EN 1361:1997-08 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| I.S. EN ISO 14557:2003 | FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
| DIN EN 15889:2011-09 | Fire-fighting hoses - Test methods |
| DIN EN 853:2016-09 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| BS EN ISO 5359 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
| ISO 1436-1:2001 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| ONORM EN ISO 1403 : 2010 | RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| 03/311096 DC : DRAFT DEC 2003 | ISO 4079-2 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
| 12/30256960 DC : 0 | BS EN 13482 - RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
| PD ISO/TR 17784:2003 | Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel |
| BS ISO 3862:2009 | Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification |
| BS ISO 4642-1:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses for fixed systems |
| 05/30129278 DC : DRAFT FEB 2005 | ISO/DIS 8029-2 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
| BS ISO 5772:2015 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
| 16/30335320 DC : 0 | BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| ISO 1825:2017 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification |
| NF EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| 14/30266729 DC : 0 | BS ISO 17324 - RUBBER HOSES FOR AUTOMOTIVE TURBOCHARGERS - SPECIFICATION |
| BS ISO 2398 : 1995 AMD 9704 | RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
| 16/30335329 DC : 0 | BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| ISO 4639-3:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels |
| DIN EN ISO 1403:2010-04 | RUBBER HOSES, TEXTILE REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| 03/311275 DC : DRAFT DEC 2003 | ISO 1436-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
| 15/30293925 DC : 0 | BS EN ISO 6134 - RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION |
| DIN 14811:2008-01 | FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| BS 8451:2004 | Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification |
| BS ISO 4079:2017 | Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification |
| DIN EN 15807:2011-05 | Railway applications - Pneumatic half couplings |
| ISO 4081:2016 | Rubber hoses and tubing for cooling systems for internal-combustion engines Specification |
| ISO 8028:2017 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification |
| ISO 4079:2017 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types for oil-based or water-based fluids Specification |
| BS ISO 4639-3:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxidized fuels |
| I.S. EN 16820:2017 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
| I.S. EN 16436-1:2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| EN ISO 8028:2018 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017) |
| ISO 6804:2016 | Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification |
| DIN EN 1762:2016-09 (Draft) | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
| EN ISO 1825:2017 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017) |
| ISO 1403:2005 | Rubber hoses, textile-reinforced, for general-purpose water applications Specification |
| BIS IS 9573 : 2012 | RUBBER HOSE FOR LIQUEFIED PETROLEUM GAS (LPG) - SPECIFICATION |
| EN 16436-1:2014+A1:2015 | Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
| 18/30363978 DC : 0 | BS EN 1762 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| BS EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification |
| ISO 4079-1:2001 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| ISO 1823-2:1997 | Rubber hoses and hose assemblies Part 2: Ship/dockside discharge Specification |
| I.S. EN 856:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| DIN EN 13482:2013-12 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
| DIN EN 14540:2014-09 | FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
| UNE-EN 1765:2017 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam — Specification |
| BS EN ISO 3861:2008 | Rubber hoses for sand and grit blasting. Specification |
| UNE-EN ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) |
| I.S. EN ISO 6224:2011 | THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 6224:2011) |
| I.S. EN 14540:2014 | FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
| EN 15807:2011 | Railway applications - Pneumatic half couplings |
| I.S. EN 13483:2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| DIN EN 14420-1:2013-09 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| I.S. EN ISO 3861:2008 | RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
| DIN EN 1361:2004-10 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| I.S. EN ISO 1401:2016 | RUBBER HOSES FOR AGRICULTURAL SPRAYING (ISO 1401:2016) |
| I.S. EN 1947:2014 | FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| I.S. EN ISO 5774:2016 | PLASTICS HOSES - TEXTILE-REINFORCED TYPES FOR COMPRESSED-AIR APPLICATIONS - SPECIFICATION (ISO 5774:2016) |
| I.S. EN ISO 2398:2016 | RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016) |
| EN ISO 3861:2008 | Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005) |
| I.S. EN 12115:2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| DIN EN ISO 2398:2010-04 | RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016) |
| DIN EN ISO 3821:2010-07 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| I.S. EN ISO 14113:2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| I.S. EN ISO 6134:2017 | RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017) |
| I.S. EN 694:2014 | FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| I.S. EN 1360:2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| DIN EN ISO 14557:2008-01 | Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies (ISO 14557:2002 + AMD 1:2007); German version EN ISO 14557:2002 + A1:2007 |
| DIN EN 1947:2002-11 | FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| I.S. EN ISO 5771:2008 | RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
| I.S. EN 13482:2013 | RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
| I.S. EN 1765:2016 | RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES |
| I.S. EN 853:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| I.S. EN 857:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| I.S. EN 14420-1:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
| ONORM EN 13483 : 2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| BS 4749:1991 | Specification for textile reinforced rubber hydraulic hoses and hose assemblies |
| BS 4586:1992 | Specification for spiral wire reinforced rubber covered hydraulic hoses and hose assemblies |
| BS 3832:1991 | Specification for wire reinforced rubber hoses and hose assemblies for hydraulic installations |
| UNI EN ISO 3861 : 2009 | RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
| UNE-EN ISO 28017:2012 | Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011) |
| BS EN 15807:2011 | Railway applications. Pneumatic half couplings |
| ONORM EN ISO 3861 : 2010 | RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
| BS EN ISO 8029:2014 | Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification |
| DIN EN 16820:2015-03 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
| UNI EN 15807 : 2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| 11/30244915 DC : 0 | BS EN ISO 8029 - PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
| DIN EN 1360:2013-09 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| 15/30317651 DC : 0 | BS ISO 11424 - RUBBER HOSES AND TUBING FOR AIR AND VACUUM SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
| 15/30301522 DC : 0 | BS ISO 13775-2 - THERMOPLASTIC TUBING AND HOSES FOR AUTOMOTIVE USE - PART 2: PETROLEUM-BASED-FUEL APPLICATIONS |
| 03/311322 DC : DRAFT JAN 2004 | ISO 11237-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED COMPACT TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
| 14/30293931 DC : 0 | BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS |
| UNE-EN 15889:2013 | Fire-fighting hoses - Test methods |
| 03/310327 DC : DRAFT SEP 2003 | BS 5120 - RUBBER HOSES FOR GAS WELDING, CUTTING AND ALLIED PROCESSES - HIGH KINK RESISTANT WELDING HOSE (TYPE H) - SPECIFICATION |
| BS ISO 1436-2:2005 | Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types. Specification Water-based fluid applications |
| 16/30326500 DC : DRAFT JAN 2016 | BS ISO 19385 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER JETTING OR WATER BLASTING APPLICATIONS |
| 16/30334966 DC : 0 | BS EN ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION |
| BS ISO 17165-1:2007 | Hydraulic fluid power. Hose assemblies Dimensions and requirements |
| BS ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels |
| BS ISO 6224 : 1995 AMD 9706 | PLASTIC HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| UNI EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| 07/30175122 DC : DRAFT DEC 2007 | BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| 14/30293928 DC : 0 | BS ISO 13775-1 - THERMOPLASTIC TUBING AND HOSES FOR AUTOMOTIVE USE - PART 1: NON-FUEL APPLICATIONS |
| 09/30193685 DC : 0 | BS ISO 4081 - RUBBER HOSES AND TUBING FOR COOLING SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
| UNE-EN ISO 4641:2017 | Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016) |
| 05/30128222 DC : DRAFT JAN 2005 | ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
| BS EN 15889:2011 | Fire-fighting hoses. Test methods |
| DIN EN ISO 8029:2014-12 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
| BS ISO 4642-2:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
| UNE-EN 15807:2011 | Railway applications - Pneumatic half couplings |
| BS ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification |
| I.S. EN ISO 28017:2018 | RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2018) |
| ISO 4639-1:1987 | Rubber tubing and hoses for fuel circuits for internal combustion engines Specification Part 1: Conventional liquid fuels |
| ISO/TR 17784:2003 | Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel |
| UNI EN ISO 8029 : 2014 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
| ISO 1823-1:1997 | Rubber hoses and hose assemblies Part 1: On-shore oil suction and discharge Specification |
| EN ISO 28017:2018 | Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018) |
| ISO 11425:1996 | Rubber hoses and hose assemblies for automobile power-steering systems Specification |
| ISO 13775-1:2015 | Thermoplastic tubing and hoses for automotive use Part 1: Non-fuel applications |
| I.S. EN ISO 4641:2016 | RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016) |
| DIN EN ISO 14113:2014-02 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| DIN EN ISO 3861:2010-04 | Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005) |
| DIN EN 694:2014-10 | FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| DIN EN 12115:2011-04 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011 |
| BS EN 1763-1:2001 | Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase Requirements for rubber and plastics tubing and hoses |
| BS EN 853:2015 | Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification |
| ISO 1401:2016 | Rubber hoses for agricultural spraying |
| UNE-EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| BS EN 694:2014 | Fire-fighting hoses. Semi-rigid hoses for fixed systems |
| UNE-EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
| DIN EN 856:2016-09 | RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| UNI EN ISO 14113 : 2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) |
| UNI EN ISO 5771 : 2009 | RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
| EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
| UNI EN ISO 1403 : 2009 | RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| UNI EN 13482 : 2013 | RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
| UNI EN ISO 6224 : 2011 | THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| UNI EN 1947 : 2014 | FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| UNI EN 1360 : 2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| UNI EN 13483 : 2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| UNI EN 14540 : 2014 | FIRE-FIGHTING HOSES - NON-PERCOLATING LAYFLAT HOSES FOR FIXED SYSTEMS |
| UNI EN 694 : 2014 | FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| UNI EN 14420-1 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
| I.S. EN 15807:2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| DIN EN 16436-1:2016-04 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| BS ISO 11425:1996 | Rubber hoses and hose assemblies for automobile power-steering systems. Specification |
| BS EN 16820:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining |
| 10/30234625 DC : 0 | BS EN 14420-1 - HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
| 10/30212877 DC : DRAFT JUNE 2010 | BS ISO 28017 - RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION |
| I.S. EN 1361:2004 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| ISO 3821:2008 | Gas welding equipment Rubber hoses for welding, cutting and allied processes |
| 07/30175157 DC : DRAFT DEC 2007 | BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER BASED FLUIDS - SPECIFICATION |
| ISO 19385:2017 | Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications Specification |
| 11/30250273 DC : 0 | BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| 13/30227963 DC : 0 | BS ISO 1823 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE - SPECIFICATION |
| UNE-EN ISO 18752:2017 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
| BS ISO 4079-2:2005 | Rubber hoses and hose assemblies. Textile-reinforced hydraulic types. Specification Water-based fluid applications |
| 03/304727 DC : DRAFT OCT 2003 | ISO/DIS 8029 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE REINFORCED - SPECIFICATION |
| UNI ISO 17165-1 : 2012 | HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS |
| BS ISO 4081:2016 | Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification |
| 08/30183539 DC : DRAFT JUNE 2008 | BS ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION |
| 16/30335326 DC : 0 | BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| BS ISO 1823:2015 | Rubber hose and hose assemblies for oil suction and discharge service. Specification |
| 09/30200633 DC : 0 | BS ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION |
| BS EN ISO 4641:2016 | Rubber hoses and hose assemblies for water suction and discharge. Specification |
| 04/30110371 DC : 0 | ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION |
| ISO 4639-2:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels |
| BS ISO 6605:2017 | Hydraulic fluid power. Test methods for hoses and hose assemblies |
| BS ISO 13775-1:2015 | Thermoplastic tubing and hoses for automotive use Non-fuel applications |
| UNI EN 15889 : 2011 | FIRE-FIGHTING HOSES - TEST METHODS |
| 03/300797 DC : DRAFT JAN 2003 | EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION |
| UNE-EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
| I.S. EN ISO 18752:2016 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 18752:2014) |
| I.S. EN ISO 5359:2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
| ISO 17165-1:2007 | Hydraulic fluid power — Hose assemblies — Part 1: Dimensions and requirements |
| BS EN ISO 8028:2018 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification |
| ISO 13363:2016 | Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification |
| BS ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification |
| I.S. EN ISO 8029:2014 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
| PREN 13482 : DRAFT 2012 | RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
| ISO 3862-2:2005 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining Wire-reinforced hydraulic types for coal mining Specification |
| ISO 19013-2:2016 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels |
| PREN 1762 : DRAFT 2018 | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| ISO 1436:2017 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification |
| I.S. EN 1762:2017 | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification |
| ISO 23297:2017 | Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification |
| ISO 17324:2014 | Rubber hoses for automotive turbochargers — Specification |
| I.S. EN ISO 1825:2017 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION (ISO 1825:2017) |
| DIN EN ISO 5771:2009-10 | Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2008) |
| BS EN ISO 2398:2016 | Rubber hoses, textile-reinforced, for compressed air. Specification |
| ISO 4641:2016 | Rubber hoses and hose assemblies for water suction and discharge — Specification |
| ISO 6224:2011 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification |
| BS EN 1361:2004 | Rubber hoses and hose assemblies for aviation fuel handling. Specification |
| ISO 2398:2016 | Rubber hoses, textile-reinforced, for compressed air — Specification |
| ISO 3862-1:2001 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| UNE-EN ISO 1401:2017 | Rubber hoses for agricultural spraying (ISO 1401:2016) |
| BS EN ISO 6224:2011 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification |
| UNE-EN ISO 3821:2011 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
| BS EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
| UNE-EN 857:2015 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| BS EN ISO 5771:2008 | Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification |
| UNE-EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| BS EN 14420-1:2013 | Hose fittings with clamp units Requirements, types of fixing and connection, designation and testing |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| ISO 14557:2002 | Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies |
| UNE-EN 13482:2014 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
| ISO 3861:2005 | Rubber hoses for sand and grit blasting Specification |
| BS EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
| ISO 5771:2008 | Rubber hoses and hose assemblies for transferring anhydrous ammonia — Specification |
| UNE-EN 694:2015 | Fire-fighting hoses - Semi-rigid hoses for fixed systems |
| BS EN 1947:2014 | Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| UNE-EN 1947:2015 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| UNE-EN 14540:2015 | Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
| BS EN ISO 1403:2008 | Rubber hoses, textile-reinforced, for general-purpose water applications. Specification |
| UNE-EN ISO 5774:2016 | Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
| BS EN ISO 1401:2016 | Rubber hoses for agricultural spraying |
| UNE-EN ISO 2398:2017 | Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016) |
| EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| EN ISO 18752:2016 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
| EN ISO 3821:2010 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
| EN 14420-1:2013 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| EN 1327:1996 | Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| EN ISO 8029:2014 | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
| EN 14540:2014 | Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
| EN ISO 6224:2011 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
| EN ISO 2398:2016 | Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016) |
| EN 16820:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining |
| EN 559 : 2003 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| EN ISO 1403:2008 | Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2005) |
| EN 1361:2004 | Rubber hoses and hose assemblies for aviation fuel handling - Specification |
| EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| EN 1947:2014 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| EN 1765:2016 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| EN 15889:2011 | Fire-fighting hoses - Test methods |
| EN ISO 5771:2008 | Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2008) |
| EN 857:2015 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| EN ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) |
| EN ISO 1401:2016 | Rubber hoses for agricultural spraying (ISO 1401:2016) |
| EN 856:2015 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| EN 694:2014 | Fire-fighting hoses - Semi-rigid hoses for fixed systems |
| EN 1763-1 : 2000 | RUBBER AND PLASTICS TUBING, HOSES AND ASSEMBLIES FOR USE WITH COMMERCIAL PROPANE, COMMERCIAL BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE - PART 1: REQUIREMENTS FOR RUBBER AND PLASTICS TUBING AND HOSES |
| EN 739:1998/A1:2002 | LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
| EN ISO 5774:2016 | Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
| EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| EN ISO 4641:2016 | Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016) |
| 15/30315105 DC : 0 | BS EN 16820 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - ELASTOMERIC HOSES WITH OR WITHOUT LINER |
| PREN 14420-1 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
| 15/30317639 DC : 0 | BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION |
| BS ISO 17324:2014 | Rubber hoses for automotive turbochargers. Specification |
| 12/30261644 DC : 0 | BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE |
| ONORM EN 12115 : OCT 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| DIN EN ISO 4641:2016-07 (Draft) | RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016) |
| PREN 1360 : DRAFT 2011 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| 13/30275849 DC : 0 | BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| 15/30317642 DC : 0 | BS EN ISO 8028 - RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION |
| ISO 2928:2003 | Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) Specification |
| DIN EN ISO 28017:2015-12 | RUBBER HOSES AND HOSE ASSEMBLIES, WIRE OR TEXTILE REINFORCED, FOR DREDGING APPLICATIONS - SPECIFICATION (ISO 28017:2011 + AMD 1:2015) |
| 11/30250270 DC : 0 | BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| UNE-EN ISO 8029:2014 | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
| 15/30317636 DC : 0 | BS EN ISO 1401 - RUBBER HOSES FOR AGRICULTURAL SPRAYING |
| 15/30317648 DC : 0 | BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
| 15/30317663 DC : 0 | BS ISO 11759 - RUBBER HOSES AND HOSE ASSEMBLIES FOR DISPENSING LIQUEFIED PETROLEUM GASES (LPGS) - SPECIFICATION |
| ISO 11237:2017 | Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification |
| BS ISO 13363:2004 | Rubber and plastics hoses for marine-engine wet-exhaust systems. Specification |
| BS ISO 13775-2:2016 | Thermoplastic tubing and hoses for automotive use Petroleum-based-fuel applications |
| 08/30178592 DC : DRAFT FEB 2008 | BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION |
| 16/30312462 DC : 0 | BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES |
| ISO 28017:2018 | Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification |
| BS ISO 11237-1:2005 | Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Oil-based fluid applications |
| BS ISO 2929:2014 | Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification |
| BS ISO 11237-2:2006 | Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Water-based fluid applications |
| BS ISO 1403 : 1995 AMD 9703 | RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATIONS |
| BS ISO 1436:2017 | Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification |
| ISO 13775-2:2016 | Thermoplastic tubing and hoses for automotive use Part 2: Petroleum-based-fuel applications |
| BS EN ISO 3821:2010 | Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
| CSA Z5359 : 2016 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES, MEDICAL VACUUM, MEDICAL SUPPORT GASES, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
| I.S. EN ISO 8028:2018 | RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION (ISO 8028:2017) |
| ISO 2929:2014 | Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification |
| ISO 11237-1:2004 | Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based fluid applications |
| BS EN 16436-1 : 2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| UNE-EN 16820:2018 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining |
| DIN EN ISO 5359:2015-02 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
| ISO 1436-2:2005 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| UNE-EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| ISO 18752:2014 | Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification |
| BS EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification |
| BS EN 854:2015 | Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification |
| ISO 5774:2016 | Plastics hoses — Textile-reinforced types for compressed-air applications — Specification |
| BS EN ISO 14113:2013 | Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| ISO 8029:2014 | Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification |
| BS EN 1761:1999 | Rubber hoses and hose assemblies for fuel truck delivery. Specification |
| UNI EN 12115 : 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| DIN EN 857:2016-09 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| DIN EN 1762:2004-07 | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| DIN EN 854:2016-09 | RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| EN 13482:2013 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
| DIN EN ISO 6224:2012-02 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
| EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| ONORM EN ISO 5771 : 2009 | RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| AS/NZS 1335:2020 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| ISO 5893:2002 | Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification |
| ISO 6133:2015 | Rubber and plastics Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.