ISO 7010:2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Graphical symbols Safety colours and safety signs Registered safety signs
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
30-07-2019
Superseded by
Published date
27-05-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 7010:2011 prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation.
The shape and colour of each safety sign are according to ISO 3864-1 and the design of the graphical symbols is according to ISO 3864-3.
ISO 7010:2011 is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of ISO 7010:2011 and of the ISO 3864 series.
ISO 7010:2011 specifies the safety sign originals that may be scaled for reproduction and application purposes.
| DocumentType |
Standard
|
| Pages |
124
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DS/EN ISO 7010:2012 | Identical |
| IS 16451 : 2018 | Identical |
| I.S. EN ISO 7010:2012 | Identical |
| EN ISO 7010 : 2012 AMD 7 2017 | Identical |
| PN-EN ISO 7010:2012 | Identical |
| NEN-EN-ISO 7010:2012 | Identical |
| ÖNORM EN ISO 7010: 2015 11 01 | Identical |
| BS EN ISO 7010 : 2012 | Identical |
| SS-EN ISO 7010:2012 | Identical |
| NF EN ISO 7010:2013 | Identical |
| DIN EN ISO 7010:2012-10 | Identical |
| UNI EN ISO 7010 : 2017 | Identical |
| SN EN ISO 7010:2012 | Identical |
| EN ISO 7010:2012 | Identical |
| DS EN ISO 7010 : 2012 AMD 7 2017 | Identical |
| NS EN ISO 7010 : 2012 AMD 7 2017 | Identical |
| NF EN ISO 7010 : 2013 AMD 7 2017 | Identical |
| NBN EN ISO 7010 : 2012 AMD 5 2015 | Identical |
| BS ISO 7010 : 2011 | Identical |
| ONORM EN ISO 7010 : 2015 AMD 7 2017 | Identical |
| PN ISO 7010 : 2006 | Identical |
| NEN EN ISO 7010 : 2012 AMD 7 2017 | Identical |
| BS EN ISO 7010:2012+A7:2017 | Identical |
| PN EN ISO 7010 : 2012 AMD 7 2017 | Identical |
| UNE-EN ISO 7010:2012 | Identical |
| UNI EN ISO 7010 : 2014 | Identical |
| NFX 08 003-3 : 2006 | Identical |
| I.S. EN 16712-2:2015 | PORTABLE EQUIPMENT FOR PROJECTING EXTINGUISHING AGENTS SUPPLIED BY FIRE FIGHTING PUMPS - PORTABLE FOAM EQUIPMENT - PART 2: PICK-UP TUBES |
| 13/30277122 DC : 0 | BS EN 12929-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 1: REQUIREMENTS FOR ALL INSTALLATIONS |
| UNE-EN ISO 12217-3:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
| DIN EN 16276:2013-04 | Evacuation Lighting in Road Tunnels |
| ISO 24409-1:2010 | Ships and marine technology Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings Part 1: Design principles |
| CEI EN 60601-1-11 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| DIN EN ISO 11148-6:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012) |
| BS ISO 6469-1:2009 | Electrically propelled road vehicles. Safety specifications On-board rechargeable energy storage system (RESS) |
| 16/30339514 DC : 0 | BS EN 17003 - ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
| BS EN 14033-1:2017 | Railway applications. Track. Railbound construction and maintenance machines Technical requirements for running |
| UNE-EN ISO 16315:2016 | Small craft - Electric propulsion system (ISO 16315:2016) |
| 14/30288853 DC : 0 | BS PD CEN/TS 15989 - FIREFIGHTING AND RESCUE SERVICE VEHICLES AND EQUIPMENT - GRAPHICAL SYMBOLS FOR CONTROL ELEMENTS AND DISPLAYS AND FOR MARKINGS |
| BS EN ISO 11148-1:2011 | Hand-held non-electric power tools. Safety requirements Assembly power tools for non-threaded mechanical fasteners |
| UNI EN ISO 11148-2 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
| PD IEC/TR 60878:2015 | Graphical symbols for electrical equipment in medical practice |
| CEI EN 61310-2 : 2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
| UNE-EN ISO 6185-4:2012 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| BS EN ISO 11148-11:2011 | Hand-held non-electric power tools. Safety requirements Nibblers and shears |
| I.S. EN 50636-2-107:2015 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| DIN EN ISO 13297:2015-04 | SMALL CRAFT - ELECTRICAL SYSTEMS - ALTERNATING CURRENT INSTALLATIONS (ISO 13297:2014) |
| BS EN 1829-1:2010 | High pressure water jet machines. Safety requirements Machines |
| BS ISO 20474-1:2017 | Earth-moving machinery. Safety General requirements |
| BS EN 15288-1 : 2008 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| BS EN ISO 13482:2014 | Robots and robotic devices. Safety requirements for personal care robots |
| DIN EN ISO 11148-9:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) |
| AAMI ISO 81060-1 : 2007 | NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE |
| 18/30321208 DC : DRAFT FEB 2018 | BS ISO 28564-3 - PUBLIC INFORMATION GUIDANCE SYSTEMS - PART 3: GUIDELINES FOR THE DESIGN AND USE OF INFORMATION INDEX SIGNS |
| CSA C22.2 No. 61010.2.010 : 2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-010: PARTICULAR REQUIREMENTS FOR LABORATORY EQUIPMENT FOR THE HEATING OF MATERIALS |
| BS EN ISO 80601-2-69:2014 | Medical electrical equipment Particular requirements for basic safety and essential performance of oxygen concentrator equipment |
| BS ISO 24409-3:2014 | Ships and marine technology. Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings Code of practice |
| BS EN ISO 28139:2009 | Agricultural and forestry machinery. Knapsack combustion engine-driven mistblowers. Safety requirements |
| PREN 50547 : DRAFT 2011 | RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS |
| DIN EN 16712-2:2015-12 | PORTABLE EQUIPMENT FOR PROJECTING EXTINGUISHING AGENTS SUPPLIED BY FIRE FIGHTING PUMPS - PORTABLE FOAM EQUIPMENT - PART 2: PICK-UP TUBES |
| BS ISO 24409-2:2014 | Ships and marine technology. Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings Catalogue |
| 09/30197377 DC : 0 | BS ISO 3864-1 - GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: DESIGN PRINCIPLES FOR SAFETY SIGNS AND SAFETY MARKINGS |
| BS EN 82079-1:2012 | Preparation of instructions for use. Structuring, content and presentation General principles and detailed requirements |
| DIN EN 16564:2015-04 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| DIN EN 16264:2014-11 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
| 14/30278956 DC : 0 | BS ISO 17842-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE |
| DIN EN ISO 11148-5:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) |
| 13/30273033 DC : 0 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| PRCEN/TS 15989 : DRAFT 2014 | FIREFIGHTING AND RESCUE SERVICE VEHICLES AND EQUIPMENT - GRAPHICAL SYMBOLS FOR CONTROL ELEMENTS AND DISPLAYS AND FOR MARKINGS |
| 13/30266386 DC : 0 | BS ISO 20712-3 - WATER SAFETY SIGNS AND BEACH SAFETY FLAGS - PART 3: GUIDANCE FOR USE |
| BS EN ISO 11148-10:2011 | Hand-held non-electric power tools. Safety requirements Compression power tools |
| I.S. EN 16474:2015 | PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS |
| PREN 12929-1 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 1: REQUIREMENTS FOR ALL INSTALLATIONS |
| BS EN 16712-2:2015 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable foam equipment Pick-up tubes |
| ISO 9186-1:2014 | Graphical symbols — Test methods — Part 1: Method for testing comprehensibility |
| BS EN 60601-1-12:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
| BS EN 16474:2015 | Plastics and rubber machines. Tyre curing machines. Safety requirements |
| DIN EN 15180:2015-01 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 6469-1:2009 | Electrically propelled road vehicles Safety specifications Part 1: On-board rechargeable energy storage system (RESS) |
| PREN 474-1 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 15/30327092 DC : 0 | BS EN 60335-2-87 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-87: PARTICULAR REQUIREMENTS FOR ELECTRICAL ANIMAL-STUNNING EQUIPMENT |
| 15/30301929 DC : 0 | BS ISO 19027 - DESIGN PRINCIPLES FOR COMMUNICATION SUPPORT BOARD USING PICTORIAL SYMBOLS |
| I.S. EN ISO 11806-1:2011 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE (ISO 11806-1:2011) |
| ONORM EN 1838 : 2013 | LIGHTING APPLICATIONS - EMERGENCY LIGHTING |
| 17/30345266 DC : 0 | BS ISO 6469-3 - ELECTRICALLY PROPELLED ROAD VEHICLES - SAFETY SPECIFICATIONS - PART 3: ELECTRICAL SAFETY |
| BS EN 15180:2014 | Food processing machinery. Food depositors. Safety and hygiene requirements |
| 13/30276226 DC : 0 | BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| BS EN 80416-3 : 2003 | BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS |
| API 2CCU : 2017 | OFFSHORE CARGO CARRYING UNITS |
| CSA C22.2 No. 141 : 2010 : INC : UPD 1 : 2011 : R2015 | EMERGENCY LIGHTING EQUIPMENT |
| I.S. EN ISO 13297:2014 | SMALL CRAFT - ELECTRICAL SYSTEMS - ALTERNATING CURRENT INSTALLATIONS (ISO 13297:2014) |
| ISO 13577-1:2016 | Industrial furnaces and associated processing equipment Safety Part 1: General requirements |
| I.S. EN ISO 16315:2016 | SMALL CRAFT - ELECTRIC PROPULSION SYSTEM (ISO 16315:2016) |
| CEI EN 61310-1 : 2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS |
| PREN 15194 : DRAFT 2015 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| PREN 15572 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| UNE-EN 50547:2013 | Railway applications - Batteries for auxiliary power supply systems |
| DIN EN ISO 13482:2014-11 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
| UNE-EN ISO 80601-2-69:2015 | Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014) |
| NF EN 50122-1 : 2011 AMD 4 2018 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| BS EN 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| CAN/CSA-C22.2 NO. 80601-2-72:17 | Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (Adopted ISO 80601-2-72:2015, first edition, 2015-09-01, with Canadian deviations) |
| ISO 23601:2009 | Safety identification Escape and evacuation plan signs |
| I.S. EN ISO 11148-1:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011) |
| I.S. EN ISO 81060-1:2012 | NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE (ISO 81060-1:2007) |
| PREN 15163 : DRAFT 2014 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
| PREN 1069-2 : DRAFT 2015 | WATER SLIDES - PART 2: INSTRUCTIONS |
| I.S. EN 378-2:2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
| I.S. EN 415-10:2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| CSA C22.2 No. 141 : 2010 | EMERGENCY LIGHTING EQUIPMENT |
| IEC 60335-2-40:2018 | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| I.S. EN ISO 11148-10:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011) |
| I.S. EN ISO 9094:2017 | SMALL CRAFT - FIRE PROTECTION (ISO 9094:2015) |
| PREN 1838 : DRAFT 2011 | LIGHTING APPLICATIONS - EMERGENCY LIGHTING |
| ISO 11148-13:2017 | Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools |
| I.S. EN ISO 11148-8:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011) |
| I.S. EN 16564:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| ISO 12217-1:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m |
| ONORM EN ISO 13297 : 2015 | SMALL CRAFT - ELECTRICAL SYSTEMS - ALTERNATING CURRENT INSTALLATIONS (ISO 13297:2014) |
| SAE J 3024 : 2014 | PRODUCT SAFETY SIGNS FOR READY MIXED CONCRETE TRUCKS |
| I.S. EN 50570:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| I.S. EN 15180:2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 15571:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| BS EN ISO 80601-2-12:2011 | Medical electrical equipment Particular requirements for basic safety and essential performance of critical care ventilators |
| I.S. EN 1829-1:2010 | HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES |
| I.S. EN 62282-6-100:2010 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010 (EQV)) |
| AAMI IEC 62366-1 : 2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| ISO 16923:2016 | Natural gas fuelling stations — CNG stations for fuelling vehicles |
| ISO/IEC 80079-38:2016 | Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines |
| BS ISO 13577-1:2016 | Industrial furnaces and associated processing equipment. Safety General requirements |
| I.S. EN ISO 11148-3:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012) |
| ISO 16142-1:2016 | Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNI EN 15180 : 2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN ISO 6185-3:2015 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| UNI EN 1648-2 : 2012 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| I.S. EN 50636-2-94:2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-94: PARTICULAR REQUIREMENTS FOR SCISSORS TYPE GRASS SHEARS |
| NF EN ISO 11192 : 2006 | SMALL CRAFT - GRAPHICAL SYMBOLS |
| EN ISO 13297:2014 | Small craft - Electrical systems - Alternating current installations (ISO 13297:2014) |
| BS EN ISO 9094:2017 | Small craft. Fire protection |
| DIN EN ISO 6185-3:2014-12 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| IEC TR 60930:2008 | Guidelines for administrative, medical and nursing staff concerned with the safe use of medical electrical equipment and medical electrical systems |
| UNI EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| CSA C22.2 No. 61980-1 : 2016 | ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. CEN/TS 15291:2006 | IDENTIFICATION CARD SYSTEM - GUIDANCE ON DESIGN FOR ACCESSIBLE CARD-ACTIVATED DEVICES |
| EN ISO 6185-3:2014 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| I.S. EN 1648-1:2018 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| IEC 61010-2-120:2016 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment |
| DIN EN ISO/IEC 80079-38:2012-08 (Draft) | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
| SAE J 2851 : 2015 | RECOVERY EQUIPMENT FOR CONTAMINATED R-134A OR R-1234YF REFRIGERANT FROM MOBILE AUTOMOTIVE AIR CONDITIONING SYSTEMS |
| AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| NFPA 170 : 2018 | FIRE SAFETY AND EMERGENCY SYMBOLS |
| CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| EN 15567-1:2015 | Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements |
| UNE-EN 378-2:2017 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| BS EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing General requirements |
| BS EN 13743:2017 | Safety requirements for coated abrasive products |
| UNE-EN 671-2:2013 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| 15/30286010 DC : 0 | BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| 13/30238229 DC : 0 | BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS |
| BS EN 1838:2013 | Lighting applications. Emergency lighting |
| BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| BS EN 62477-1 : 2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012) |
| 15/30286835 DC : 0 | BS ISO 14990-2 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 2: PARTICULAR REQUIREMENTS FOR EXTERNALLY-POWERED MACHINES |
| I.S. EN ISO 11681-2:2011 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011) |
| I.S. EN 1069-2:2017 | WATER SLIDES - PART 2: INSTRUCTIONS |
| I.S. EN ISO 13732-1:2008 | ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES |
| CEN/TS 15291:2006 | Identification card system - Guidance on design for accessible card-activated devices |
| EN 62052-31:2016 | Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests |
| IEC 60335-2-40:2018 RLV | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| EN 61010-2-012:2016 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
| EN 12312-4:2014 | Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges |
| EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| EN 1069-2:2017 | Water slides - Part 2: Instructions |
| EN 50636-2-94:2014 | Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears |
| CEN/TS 15989:2015 | Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings |
| EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
| DIN EN 14033-2:2017-10 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
| UNE-EN 50122-1:2011 | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -- Part 1: Protective provisions against electric shock |
| OVE/ONORM EN 62282-4-101 : 2015 | FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS (APU) - SAFETY OF ELECTRICALLY POWERED INDUSTRIAL TRUCKS (IEC 62282-4-101:2014) |
| ONORM EN 15288-1 : 2010 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 45545-7:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS |
| DIN EN 16237:2013-04 | Classification of non-electrical sources of incoherent optical radiation |
| DIN 67510-3:2011-04 | Photoluminescent pigments and products - Part 3: Low location lighting system |
| 17/30339392 DC : DRAFT MAY 2017 | BS ISO/IEC 24779-5 - INFORMATION TECHNOLOGY - CROSS-JURISDICTIONAL AND SOCIETAL ASPECTS OF IMPLEMENTATION OF BIOMETRIC TECHNOLOGIES - PICTOGRAMS, ICONS AND SYMBOLS FOR USE WITH BIOMETRIC SYSTEMS - PART 5: FACE APPLICATIONS |
| IEC 60335-2-87:2016 | Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal stunning equipment |
| 11/30227604 DC : 0 | BS 5266-1 - EMERGENCY LIGHTING - PART 1: CODE OF PRACTICE FOR THE EMERGENCY ESCAPE LIGHTING OF PREMISES |
| ISO 13578:2017 | Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
| 14/30294816 DC : 0 | BS EN 16713-1 - DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 28139:2009 | AGRICULTURAL AND FORESTRY MACHINERY - KNAPSACK COMBUSTION ENGINE- DRIVEN MISTBLOWERS - SAFETY REQUIREMENTS |
| 17/30359001 DC : 0 | BS ISO/IEC GUIDE 63 - GUIDE TO THE DEVELOPMENT AND INCLUSION OF ASPECTS OF SAFETY IN INTERNATIONAL STANDARDS FOR MEDICAL DEVICES |
| BS EN ISO 80601-2-72:2015 | Medical electrical equipment Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| 15/30328959 DC : 0 | BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
| BS ISO 19202-2:2017 | Summer toboggan runs Safety requirements for operation |
| IEC 60335-2-107:2017 | Household and similar electrical appliances - Safety - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers |
| BS EN 62282-5-1:2012 | Fuel cell technologies Portable fuel cell power systems. Safety |
| ISO 7001:2007 | Graphical symbols — Public information symbols |
| BS EN 16740:2015 | Emission safety of combustible air fresheners. User safety information |
| BS EN 62282-6-100 : 2010 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY |
| 08/30154605 DC : DRAFT APR 2008 | BS ISO 15223-2 - MEDICAL DEVICES - SYMBOLS TO BE USED WITH MEDICAL DEVICE LABELS, LABELLING AND INFORMATION TO BE SUPPLIED - PART 2: SYMBOL DEVELOPMENT, SELECTION AND VALIDATION |
| BS EN ISO 11192:2005 | Small craft. Graphical symbols |
| DIN EN 14033-1:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| UNI EN ISO 11148-1 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
| 04/30117599 DC : DRAFT AUG 2004 | IEC 61310-1 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS |
| BS EN ISO 11148-12:2012 | Hand-held non-electric power tools. Safety requirements Circular, oscillating and reciprocating saws |
| 13/30250344 DC : 0 | BS EN 62744 - REPRESENTATION OF STATES OF OBJECTS BY GRAPHIC SYMBOLS |
| PD ISO/IEC GUIDE 37:2012 | Instructions for use of products by consumers |
| UNE-EN ISO 12217-2:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) |
| BS ISO 6469-3:2011 | Electrically propelled road vehicles. Safety specifications Protection of persons against electric shock |
| DIN EN 15571:2015-03 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| DIN EN 16740:2016-04 | EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION |
| ISO 3864-2:2016 | Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
| BS ISO 28564-1:2010 | Public information guidance systems Design principles and element requirements for location plans, maps and diagrams |
| PD ISO/TR 11219:2012 | Information and documentation. Qualitative conditions and basic statistics for library buildings. Space, function and design |
| 14/30297842 DC : 0 | BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
| BS ISO 9244 : 2008 | EARTH-MOVING MACHINERY - MACHINE SAFETY LABELS - GENERAL PRINCIPLES |
| BS EN 16263-5:2015 | Pyrotechnic articles. Other pyrotechnic articles Minimum labelling requirements and instructions for use |
| 17/30354245 DC : 0 | BS EN 1648-1 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| DIN ISO 13022 E : 2014 | MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES (ISO 13022:2012) |
| I.S. EN 16276:2013 | EVACUATION LIGHTING IN ROAD TUNNELS |
| DIN EN ISO 80601-2-72:2016-04 | Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015) |
| BS EN ISO 11806-1:2011 | Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Machines fitted with an integral combustion engine |
| 15/30324197 DC : 0 | BS EN 16186-2 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS |
| BS EN 61310-2:2008 | Safety of machinery. Indication, marking and actuation Requirements for marking |
| UNI EN 16228-1 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| 12/30227396 DC : 0 | BS EN ISO/DIS 16315 - SMALL CRAFT - ELECTRIC PROPULSION SYSTEM |
| BS ISO 16142-1:2016 | Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards |
| DIN EN 15288-1:2010-12 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| 15/30292707 DC : 0 | BS ISO 19202-2 - SUMMER TOBOGGAN RUNS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| 12/30196343 DC : 0 | BS ISO 24409-2 - SHIPS AND MARINE TECHNOLOGY - DESIGN, LOCATION AND USE OF SHIPBOARD SAFETY SIGNS, SAFETY-RELATED SIGNS, SAFETY NOTICES AND SAFETY MARKINGS - PART 2: CATALOGUE |
| 12/30243465 DC : 0 | BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| 04/30117615 DC : DRAFT AUG 2004 | IEC 61310-2 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
| BS EN ISO 11148-5:2011 | Hand-held non-electric power tools. Safety requirements Rotary percussive drills |
| 11/30193150 DC : 0 | BS EN 60601-1:2006 AMD.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| UNI EN ISO 80601-2-12 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| BS ISO 16069:2017 | Graphical symbols. Safety signs. Safety way guidance systems (SWGS) |
| UNI EN 1829-2 : 2008 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND CONNECTORS |
| UNI EN ISO 11148-5 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
| DIN EN ISO 11148-11:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) |
| UNI EN ISO 11148-6 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
| DIN EN 16228-1:2014-10 | Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
| DIN EN 1829-1:2010-05 | High pressure water jet machines - Safety requirements - Part 1: Machines |
| 17/30354248 DC : 0 | BS EN 1648-2 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| 10/30209530 DC : 0 | BS EN 16186-1 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 1: VISIBILITY, LAYOUT, ACCESS |
| 18/30363122 DC | BS EN 60095-7. Lead-acid starter batteries Part 7. General requirements and methods of test for motorcycle batteries |
| BS EN 60745-1 : 2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 13/30276223 DC : 0 | BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| UNI EN ISO 28881 : 2013 | MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES |
| 17/30347375 DC : 0 | BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| BS ISO 81060-1 : 2007 COR 2012 | NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE |
| BS EN ISO 12217-3:2017 | Small craft. Stability and buoyancy assessment and categorization Boats of hull length less than 6 m |
| BS EN 1672-1:2014 | Food processing machinery. Basic concepts Safety requirements |
| BS ISO 9186-1:2014 | Graphical symbols. Test methods Method for testing comprehensibility |
| ANSI/AAMI/ISO 13022:2012 | MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES |
| 06/30137313 DC : 0 | ISO/IEC 81060-1 - NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR MECHANICAL TYPE |
| BIP 2081 : 2012 | A GUIDE TO EMERGENCY LIGHTING |
| 17/30353686 DC : 0 | BS EN 50570:2013 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| I.S. EN 62477-1:2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL |
| I.S. EN ISO 6185-4:2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
| ANSI/AAMI/ISO 15223-1:2016 | MEDICAL DEVICES - SYMBOLS TO BE USED WITH MEDICAL DEVICE LABELS, LABELLING AND INFORMATION TO BE SUPPLIED - PART 1: GENERAL REQUIREMENTS |
| NF EN 60601-1-11 : 2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| PREN ISO 6185-3 : DRAFT 2013 | INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER (ISO/DIS 6185-3:2013) |
| BS EN 61010-2-010:2014 | Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for laboratory equipment for the heating of Materials |
| I.S. EN 62366-1:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| CSA ISO/IEC 13251 : 2005 : R2010 | COLLECTION OF GRAPHICAL SYMBOLS FOR OFFICE EQUIPMENT |
| DIN EN ISO 12217-2:2016-03 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 2: SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-2:2015) |
| ISO 9186-2:2008 | Graphical symbols — Test methods — Part 2: Method for testing perceptual quality |
| S.R. CEN ISO/TR 22100-1:2017 | SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015) |
| ISO 30061:2007 | Emergency lighting |
| DIN EN ISO 11148-8:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) |
| UNE-EN 16264:2015 | Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuated tools |
| EN 50604-1:2016 | Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods |
| I.S. EN 16186-2:2017 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS |
| I.S. EN 50122-1:2011 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| IEC 60335-2-71:2018 | Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals |
| BS EN ISO/IEC 80079-38 : 2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016) |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| I.S. EN 1012-3:2013 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| I.S. EN 1672-1:2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| BS EN 15194:2017 | Cycles. Electrically power assisted cycles. EPAC Bicycles |
| UNI EN ISO 80601-2-55 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| I.S. EN ISO 12217-3:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 3: BOATS OF HULL LENGTH LESS THAN 6 M (ISO 12217-3:2015) |
| ANSI/AAMI/ISO 16142-1:2016 | MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 1: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL NON-IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
| BS EN 14033-2:2017 | Railway applications. Track. Railbound construction and maintenance machines Technical requirements for travelling and working |
| 17/30344378 DC : 0 | BS EN 16186-4 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 4: LAYOUT AND ACCESS |
| ISO 19202-2:2017 | Summer toboggan runs — Part 2: Safety requirements for operation |
| ISO 15845:2014 | Aircraft ground equipment - Boarding vehicle for persons with reduced mobility - Functional and safety requirements |
| CSA IEC 62366-1 : 2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| CSA C22.2 No. 80601-2-69 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT |
| UNE-EN ISO 9094:2017 | Small craft - Fire protection (ISO 9094:2015) |
| ONORM EN ISO 11192 : 2006 | SMALL CRAFT - GRAPHICAL SYMBOLS |
| ISO 18665:2015 | Traditional Chinese medicine Herbal decoction apparatus |
| IEC TR 60878:2015 | Graphical symbols for electrical equipment in medical practice |
| AAMI ISO 15223-2 : 2010 | MEDICAL DEVICES - SYMBOLS TO BE USED WITH MEDICAL DEVICE LABELS, LABELING AND INFORMATION TO BE SUPPLIED - PART 2: SYMBOL DEVELOPMENT, SELECTION AND VALIDATION |
| EN IEC 62928:2018 | Railway applications - Rolling stock - Onboard lithium-ion traction batteries |
| CSA C22.2 No. 80601-2-12 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| UNE-EN 15288-1:2009 | Swimming pools - Part 1: Safety requirements for design |
| I.S. EN 60335-2-11:2010/A2:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR TUMBLE DRYERS |
| ISO 12217-2:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m |
| SAE J 3108 : 2017 | XEV LABELS TO ASSIST FIRST AND SECOND RESPONDERS, AND OTHERS |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| DIN EN 536:2016-01 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| ISO 11806-1:2011 | Agricultural and forestry machinery Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Part 1: Machines fitted with an integral combustion engine |
| UNE-EN 81-73:2016 | Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire |
| BS EN 15567-1:2015 | Sports and recreational facilities. Ropes courses Construction and safety requirements |
| 15/30286839 DC : 0 | BS ISO 14990-3 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 3: PARTICULAR REQUIREMENTS FOR SELF-POWERED MACHINES |
| UNE-EN 1838:2016 | Lighting applications - Emergency lighting |
| UNE-EN 61010-2-010:2015 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials |
| EN 61010-2-010:2014 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials |
| IEC 60335-2-23:2016 RLV | Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care |
| I.S. EN 671-2:2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE |
| I.S. EN 1838:2013 | LIGHTING APPLICATIONS - EMERGENCY LIGHTING |
| I.S. EN 203-2-7:2014 | GAS HEATED CATERING EQUIPMENT - PART 2-7: SPECIFIC REQUIREMENTS - SALAMANDERS AND ROTISSERIES |
| I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| I.S. EN 422:2009 | PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 13743:2017 | SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| EN 16564:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| I.S. EN 13782:2015 | TEMPORARY STRUCTURES - TENTS - SAFETY |
| I.S. EN 13732:2013 | FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE |
| I.S. EN 12312-4:2014 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 4: PASSENGER BOARDING BRIDGES |
| I.S. EN 14710-1:2005 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| EN 15571:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| EN 1829-1:2010 | High pressure water jet machines - Safety requirements - Part 1: Machines |
| CEN ISO/TR 22411:2011 | Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) |
| I.S. EN 671-1:2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE |
| I.S. EN 536:2015 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN 60601-2-33:2010 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-33: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSIS |
| DIN 820-12:2014-06 | STANDARDIZATION - PART 12: GUIDELINES FOR THE INCLUSION OF SAFETY ASPECTS IN STANDARDS (ISO/IEC GUIDE 51:2014) |
| VDI 4500 Blatt 4:2011-12 | Technical documentation - Documentation process - Planning, layout, creation |
| VDI 6017:2015-08 | Lifts - Fire recall systems |
| VDI 4062:2016-04 | Emergency evacuation of people |
| OVE/ONORM EN 60335-2-77 : 2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS (IEC 60335-2-77:2002, MODIFIED) |
| OVE/ONORM EN 61010-2-010 : 2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-010: PARTICULAR REQUIREMENTS FOR LABORATORY EQUIPMENT FOR THE HEATING OF MATERIALS (IEC 61010-2-010:2014) |
| CSA C22.2 No. 60601-1-11 : 2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| DIN EN ISO 11148-2:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011) |
| NF EN ISO 9094 : 2017 | SMALL CRAFT - FIRE PROTECTION |
| UNI EN ISO 81060-1 : 2012 | NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE |
| BS EN 16276:2013 | Evacuation Lighting in Road Tunnels |
| BS EN 15571:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines |
| ISO/IEC Guide 37:2012 | Instructions for use of products by consumers |
| 17/30357943 DC : 0 | IEC 60095-1 ED 8 - LEAD-ACID STARTER BATTERIES - PART 1: GENERAL REQUIREMENTS AND METHODS OF TEST |
| BS ISO 24409-1:2010 | Ships and marine technology. Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings Design principles |
| BS EN ISO 11148-2:2011 | Hand-held non-electric power tools. Safety requirements Cutting-off and crimping power tools |
| NF EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH AN HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| 11/30235301 DC : 0 | BS EN 50547 - RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS |
| 06/30159694 DC : 0 | BS ISO 23601 - SAFETY IDENTIFICATION - ESCAPE PLAN SIGNS |
| DIN EN 1672-1:2014-12 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 15/30281259 DC : 0 | BS ISO 18665 - TRADITIONAL CHINESE MEDICINE - HERBAL DECOCTION APPARATUS |
| 13/30277660 DC : 0 | BS EN 60335-2-89:2010/AA - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR |
| DIN ISO 20712-3:2015-09 | Water safety signs and beach safety flags - Part 3: Guidance for use (ISO 20712-3:2014) |
| BS ISO 15223-2:2010 | Medical devices. Symbols to be used with medical device labels, labelling, and information to be supplied Symbol development, selection and validation |
| 08/30173038 DC : DRAFT JAN 2008 | BS EN 422 - PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
| 04/30118293 DC : DRAFT AUG 2004 | ISO 3864-3 - GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3 - DESIGN CRITERIA FOR GRAPHICAL SYMBOLS USED IN SAFETY SIGNS |
| BS ISO 28564-2:2016 | Public information guidance systems Guidelines for the design and use of location signs and direction signs |
| CEI EN 50604-1 : 1ED 2017 | SECONDARY LITHIUM BATTERIES FOR LIGHT EV (ELECTRIC VEHICLE) APPLICATIONS - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 15291:2006 | Identification card system. Guidance on design for accessible card-activated devices |
| DIN EN ISO 11148-12:2013-05 | Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
| 09/30183551 DC : 0 | BS ISO 11148-7 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| UNE-ISO 9244:2010 | Earth-moving machinery -- Machine safety labels -- General principles |
| S.R. OHSAS 18002:2008 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
| 11/30235103 DC : 0 | BS EN 1838 - LIGHTING APPLICATIONS - EMERGENCY LIGHTING |
| NFD 35 386 : 2009 | ETHANOL FIRED APPLIANCES - SAFETY REQUIREMENTS AND TEST METHODS |
| UNE-EN 16276:2015 | Evacuation Lighting in Road Tunnels |
| 13/30229200 DC : 0 | BS EN ISO 6185-3 - INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER |
| BS ISO 15817:2012 | Earth-moving machinery. Safety requirements for remote operator control systems |
| 10/30197659 DC : 0 | BS ISO 9094 - SMALL CRAFT - FIRE PROTECTION |
| ISO 19385:2017 | Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications Specification |
| BS EN ISO 81060-1:2012 | Non-invasive sphygmomanometers Requirements and test methods for non-automated measurement type |
| 14/30311740 DC : DRAFT OCT 2014 | BS EN ISO 11591 - SMALL CRAFT - FIELD OF VISION FROM HELM POSITION |
| 13/30279156 DC : 0 | BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| 17/30361773 DC : DRAFT SEP 2017 | BS EN 17164 - CLIMBING WALLS FOR USE IN THE WATER AREA OF PUBLIC USED SWIMMING POOLS - SAFETY AND OPERATIONAL REQUIREMENTS TO THE PLACE OF INSTALLATION |
| 15/30321305 DC : 0 | BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| UNI EN ISO 80601-2-69 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT |
| BS ISO 9186-3:2014 | Graphical symbols. Test methods Method for testing symbol referent association |
| 12/30258993 DC : 0 | BS ISO 9186-1 - GRAPHICAL SYMBOLS - TEST METHODS - PART 1: METHODS FOR TESTING COMPREHENSIBILITY |
| UNE-EN 60335-2-77:2011 | Safety of household and similar appliances -- Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| BS EN 15572:2015 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines |
| BS EN 16228-1:2014 | Drilling and foundation equipment. Safety Common requirements |
| 13/30263800 DC : 0 | BS ISO 15845 - AIRCRAFT GROUND EQUIPMENT - BOARDING VEHICLE FOR PERSONS WITH REDUCED MOBILITY - FUNCTIONAL AND SAFETY REQUIREMENTS |
| BS ISO 3864-3:2012 | Graphical symbols. Safety colours and safety signs Design principles for graphical symbols for use in safety signs |
| UNI ISO 20381 : 2011 | MOBILE ELEVATING WORK PLATFORMS - SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS |
| DIN EN ISO 16315:2016-08 | SMALL CRAFT - ELECTRIC PROPULSION SYSTEM (ISO 16315:2016) |
| UNI EN ISO 11148-12 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS |
| BS EN 50604-1:2016 | Secondary lithium batteries for light EV (electric vehicle) applications General safety requirements and test methods |
| UNE-EN 13637:2016 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| 09/30202690 DC : 0 | BS EN 80416-3 AMENDMENT 1 - BASIC PRINCIPLES FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS |
| BS PD ISO/TR 22411 : 2008 | |
| 09/30193656 DC : 2009 | BS ISO 28564-1 - PUBLIC INFORMATION GUIDANCE SYSTEMS - PART 1: DESIGN PRINCIPLES AND ELEMENT REQUIREMENTS FOR LOCATION PLANS, MAPS AND DIAGRAMS |
| DIN EN 14033-2:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
| 16/30326500 DC : DRAFT JAN 2016 | BS ISO 19385 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER JETTING OR WATER BLASTING APPLICATIONS |
| BS ISO 15845:2014 | Aircraft ground equipment. Boarding vehicle for persons with reduced mobility. Functional and safety requirements |
| DIN EN ISO 11148-3:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012) |
| I.S. EN 13637:2015 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 14/30270861 DC : 0 | BS 4163 - HEALTH AND SAFETY FOR DESIGN AND TECHNOLOGY IN EDUCATIONAL AND SIMILAR ESTABLISHMENTS - CODE OF PRACTICE |
| CSA C22.2 No. 61010-2-012 : 2017 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| UNI EN ISO 11148-8 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
| BS ISO 18665:2015 | Traditional Chinese medicine. Herbal decoction apparatus |
| BS EN 50636-2-94:2014 | Household and similar electrical appliances. Safety Particular requirements for scissors type grass shears |
| BS 8599-1:2011 | Workplace first aid kits Specification for the contents of workplace first aid kits |
| BS EN 50434:2014 | Safety of household and similar appliances. Particular requirements for mains operated shredders and chippers |
| 17/30362937 DC | BS ISO 24409-2. Ships and marine technology. Design, location and use of shipboard safety signs, fire control plan signs, safety notices and safety markings. Part 2. Catalogue of shipboard safety signs and fire control plan signs |
| UNE-EN 16564:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| UNE-EN 16713-1:2017 | Domestic swimming pools - Water systems - Part 1: Filtration systems - Requirements and test methods |
| AAMI ISO 81060-1:2007(R2013) | NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE |
| UNE-EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
| 15/30330735 DC : 0 | BS EN 13743 - SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| 05/30135907 DC : 0 | EN 15288-1 - SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| BS EN 16713-1:2016 | Domestic swimming pools. Water systems Filtration systems. Requirements and test methods |
| BS EN 16264:2014 | Pyrotechnic articles. Other pyrotechnic articles. Cartridges for powder actuated tools |
| 12/30258783 DC : 0 | BS EN 60335-2-11 A1 ED 7.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR TUMBLE DRYERS |
| BS EN 1012-3:2013 | Compressors and vacuum pumps. Safety requirements Process compressors |
| BS EN 60335-2-89 : 2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR |
| UNE 23032:2015 | Fire safety. Graphical symbols for use on plans: design, protection plans and evacuation plans. |
| BS EN 50636-2-92:2014 | Household and similar electrical appliances. Safety Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators |
| 15/30314272 DC : 0 | BS ISO 11592-2 - SMALL CRAFT - DETERMINATION OF MAXIMUM PROPULSION POWER RATING USING MANOEUVRING SPEED - PART 2: CRAFT WITH A LENGTH OF HULL BETWEEN 8 M AND 24 M |
| DIN EN 16474:2015-08 | PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
| CSA ISO/IEC 13251 : 2005 | COLLECTION OF GRAPHICAL SYMBOLS FOR OFFICE EQUIPMENT |
| BS EN 60335-2.77 : 2010 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| DIN EN 415-10:2014-07 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| DIN ISO 23601:2010-12 | Safety identification - Escape and evacuation plan signs (ISO 23601:2009) |
| DIN EN ISO 12217-3:2016-03 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 3: BOATS OF HULL LENGTH LESS THAN 6 M (ISO 12217-3:2015) |
| UNE-EN ISO 11806-1:2012 | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) |
| IEC 62928:2017 | Railway applications - Rolling stock - Onboard lithium-ion traction batteries |
| DIN ISO 13022:2014-06 | MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES (ISO 13022:2012) |
| IEC 62128-1:2013 | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock |
| BS EN 50636-2-107:2015 | Safety of household and similar appliances Particular requirements for robotic battery powered electrical lawnmowers |
| BS EN 60335-2-11:2010+A2:2018 | Household and similar electrical appliances. Safety Particular requirements for tumble dryers |
| CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| ISO 9244:2008 | Earth-moving machinery Machine safety labels General principles |
| I.S. EN 16264:2014 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
| ISO 14990-1:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements |
| I.S. EN 16263-5:2015 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 5: MINIMUM LABELLING REQUIREMENTS AND INSTRUCTIONS FOR USE |
| BS EN ISO 6185-4:2011 | Inflatable boats Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| I.S. EN 15572:2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| I.S. EN 15288-1:2008 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| UNI EN ISO 11148-4 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
| I.S. EN IEC 62820-2:2018 | BUILDING INTERCOM SYSTEMS - PART 2: REQUIREMENTS FOR ADVANCED SECURITY BUILDING INTERCOM SYSTEMS (ASBIS) |
| ISO 19027:2016 | Design principles for communication support board using pictorial symbols |
| I.S. EN 60601-1-12:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT |
| UNI EN ISO 11148-9 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
| I.S. EN ISO 11148-12:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS (ISO 11148-12:2012) |
| I.S. EN ISO 6185-3:2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| ISO 24409-3:2014 | Ships and marine technology — Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings — Part 3: Code of practice |
| UNI EN 415-10 : 2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| ISO 28564-1:2010 | Public information guidance systems — Part 1: Design principles and element requirements for location plans, maps and diagrams |
| I.S. EN 16774:2016 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
| EN 378-2:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| UNI ISO 21482 : 2009 | IONIZING-RADIATION WARNING - SUPPLEMENTARY SYMBOL |
| I.S. EN ISO 11148-6:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012) |
| UNE-EN 1829-1:2010 | High pressure water jet machines - Safety requirements - Part 1: Machines |
| EN 50636-2-107 : 2015 AMD 1 2018 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| PREN 17125 : DRAFT 2017 | DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS |
| PD IEC/TR 60601-4-3:2015 | Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements |
| IEC 62973-1:2018 | Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 1: General requirements |
| PREN 1648-2 : DRAFT 2017 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| PREN 17164 : DRAFT 2017 | CLIMBING WALLS FOR USE IN THE WATER AREA OF PUBLIC USED SWIMMING POOLS - SAFETY AND OPERATIONAL REQUIREMENTS TO THE PLACE OF INSTALLATION |
| ISO 20712-3:2014 | Water safety signs and beach safety flags Part 3: Guidance for use |
| ISO 17842-2:2015 | Safety of amusement rides and amusement devices Part 2: Operation and use |
| EN ISO 80601-2-55:2018 | Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2018) |
| EN ISO/IEC 80079-38:2016 | Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) |
| ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
| ISO 80601-2-55:2018 | Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors |
| IEC 60974-1:2017 | Arc welding equipment - Part 1: Welding power sources |
| I.S. EN 60335-2-89:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR |
| ISO 20474-1:2017 | Earth-moving machinery — Safety — Part 1: General requirements |
| IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
| I.S. EN 15194:2017 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| I.S. EN 61310-2:2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
| ISO 28139:2009 | Agricultural and forestry machinery Knapsack combustion-engine-driven mistblowers Safety requirements |
| DIN EN 1710:2008-08 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| DIN EN 1838:2013-10 | LIGHTING APPLICATIONS - EMERGENCY LIGHTING |
| DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
| DIN EN 81-73:2016-06 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGER LIFTS - PART 73: BEHAVIOUR OF LIFTS IN THE EVENT OF FIRE |
| DIN EN ISO 13732-1:2008-12 | ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES (ISO 13732-1:2006) |
| DIN EN 422:2009-10 | PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 13782:2015-06 | TEMPORARY STRUCTURE - TENTS - SAFETY |
| DIN EN 13743:2016-01 (Draft) | SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| IEC 60335-2-2:2009+AMD1:2012+AMD2:2016 CSV | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER-SUCTION CLEANING APPLIANCES |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| UNE-EN 62841-1:2016 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements |
| IEC 60335-2-89:2010+AMD1:2012+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor |
| ISO 80601-2-69:2014 | Medical electrical equipment Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment |
| ISO 11148-4:2012 | Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools |
| IEC 60335-2-11:2008+AMD1:2012+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-11:Particular requirements for tumble dryers |
| UNE-EN 671-1:2013 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| 04/30106146 DC : DRAFT MARCH 2004 | BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| IEC 62282-5-1:2012 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| EN 60745-1:2009/A11:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 11681-2:2017-10 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011 + Amd 1:2017) (includes Amendment A1:2017) |
| EN 60745-1:2006 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 60601-1:2008 | Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
| I.S. EN 81-73:2016 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGER LIFTS - PART 73: BEHAVIOUR OF LIFTS IN THE EVENT OF FIRE |
| EN ISO 80601-2-69:2014 | Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014) |
| CSA C22.2 No. 128 : 2016 | VENDING MACHINES |
| EN 60601-1-12:2015 | Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
| EN 15288-1:2008+A1:2010 | Swimming pools - Part 1: Safety requirements for design |
| CSA C22.2 No. 60335-2-40 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
| EN 81-73:2016 | Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire |
| EN ISO 11192:2005 | Small craft - Graphical symbols (ISO 11192:2005) |
| EN 62366-1:2015/AC:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366-1:2015) |
| CSA C22.2 No. 80601-2-12 : 2012(R2017) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| EN 13743:2017 | Safety requirements for coated abrasive products |
| EN 16740:2015 | Emission safety of combustible air fresheners - User safety information |
| UNI EN 14710-1 : 2009 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| UNI EN ISO 13732-1 : 2009 | ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES |
| UNI EN 671-1 : 2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE |
| UNI EN 1012-3 : 2014 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| BS OHSAS 18002:2008 | Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007 |
| UNI CEI EN 45545-7 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS |
| UNI EN 1838 : 2013 | LIGHTING APPLICATIONS - EMERGENCY LIGHTING |
| UNI EN 16237 : 2013 | CLASSIFICATION OF NON-ELECTRICAL SOURCES OF INCOHERENT OPTICAL RADIATION |
| UNI EN 671-2 : 2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE |
| UNI EN 203-2-7 : 2014 | GAS HEATED CATERING EQUIPMENT - PART 2-7: SPECIFIC REQUIREMENTS - SALAMANDERS AND ROTISSERIES |
| UNI EN 1710 : 2008 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| UNI EN 422 : 2009 | PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12312-4 : 2014 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 4: PASSENGER BOARDING BRIDGES |
| UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| BS EN 16564:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| ANSI/AAMI HA60601-1-11:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| DIN EN ISO 9094:2016-05 | Small craft - Fire protection (ISO 9094:2015) |
| BS ISO 20712-3:2014 | Water safety signs and beach safety flags Guidance for use |
| ISO 80601-2-61:2017 | Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
| ISO/TR 11219:2012 | Information and documentation - Qualitative conditions and basic statistics for library buildings Space, function and design |
| I.S. EN ISO 11192:2005 | SMALL CRAFT - GRAPHICAL SYMBOLS |
| 15/30325469 DC : 0 | BS EN ISO 15223-1 - MEDICAL DEVICES - SYMBOLS TO BE USED WITH MEDICAL DEVICE LABELS, LABELLING AND INFORMATION TO BE SUPPLIED - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 11148-1:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
| 07/30168739 DC : 0 | BS ISO 23601 - SAFETY IDENTIFICATION - ESCAPE PLAN SIGNS |
| 14/30244508 DC : 0 | BS EN 62366-1 - MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| 13/30260337 DC : 0 | BS 5499-4 - SAFETY SIGNS - PART 4: CODE OF PRACTICE FOR ESCAPE ROUTE SIGNING |
| BS ISO 3864-1:2011 | Graphical symbols. Safety colours and safety signs Design principles for safety signs and safety markings |
| BS ISO/IEC 24779-4:2017 | Information technology. Cross-jurisdictional and societal aspects of implementation of biometric technologies. Pictograms, icons and symbols for use with biometric systems Fingerprint applications |
| DIN EN 45545-7:2013-08 | Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations |
| DIN EN 16263-5:2015-11 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 5: MINIMUM LABELLING REQUIREMENTS AND INSTRUCTIONS FOR USE |
| BS EN ISO 11148-8:2011 | Hand-held non-electric power tools. Safety requirements Sanders and polishers |
| BS ISO 23601:2009 | Safety identification. Escape and evacuation plan signs |
| NF EN 61310-1 : 2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS |
| UNI EN 15288-1 : 2010 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| UNI EN ISO 28139 : 2010 | AGRICULTURAL AND FORESTRY MACHINERY - KNAPSACK COMBUSTION-ENGINE-DRIVEN MISTBLOWERS - SAFETY REQUIREMENTS |
| BS EN 60335-2-77:2010 | Safety of household and similar appliances Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| ISO 22727:2007 | Graphical symbols — Creation and design of public information symbols — Requirements |
| 12/30239867 DC : 0 | BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| DIN EN ISO 11806-1:2012-05 | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) |
| 12/30101207 DC : 0 | BS ISO 24409-3 - SHIPS AND MARINE TECHNOLOGY - DESIGN, LOCATION AND USE OF SHIPBOARD SAFETY SIGNS, SAFETY-RELATED SIGNS, SAFETY NOTICES AND SAFETY MARKINGS - PART 3: CODE OF PRACTICE |
| 13/30264413 DC : 0 | BS EN ISO 80601-2-72 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| 13/30276220 DC : 0 | BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| 11/30243890 DC : 0 | BS EN 16276 - EVACUATION LIGHTING IN ROAD TUNNELS |
| UNI EN ISO 11806-1 : 2012 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE |
| DIN EN 15572:2015-12 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| 14/30302903 DC : 0 | BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
| BS EN ISO 11148-6:2012 | Hand-held non-electric power tools. Safety requirements Assembly power tools for threaded fasteners |
| ISO/IEC 24779-4:2017 | Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Pictograms, icons and symbols for use with biometric systems — Part 4: Fingerprint applications |
| BS EN 50547:2013 | Railway applications. Batteries for auxiliary power supply systems |
| 13/30263819 DC : 0 | BS ISO 6966-2 - AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS |
| 08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| DIN 4844-2:2012-12 | Graphical symbols - Safety colours and safety signs - Part 2: Registered safety signs |
| 15/30325364 DC : 0 | BS EN 1069-2 - WATER SLIDES - PART 2: INSTRUCTIONS |
| 09/30176675 DC : 0 | BS EN ISO 15223-1 - MEDICAL DEVICES - SYMBOLS TO BE USED WITH MEDICAL DEVICE LABELS, LABELLING AND INFORMATION TO BE SUPPLIED - PART 1: GENERAL REQUIREMENTS |
| BS ISO 2575 : 2004 | ROAD VEHICLES - SYMBOLS FOR CONTROLS, INDICATORS AND TELL-TALES |
| BS EN 45545-7:2013 | Railway applications. Fire protection on railway vehicles Fire safety requirements for flammable liquid and flammable gas installations |
| BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
| CSA SPE 3000 : 2015 | MODEL CODE FOR THE FIELD EVALUATION OF MEDICAL ELECTRICAL EQUIPMENT AND SYSTEMS |
| PD CEN ISO/TR 22411:2011 | Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities |
| UNI EN ISO 13297 : 2015 | SMALL CRAFT - ELECTRICAL SYSTEMS - ALTERNATING CURRENT INSTALLATIONS |
| UNI EN 1829-1 : 2010 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES |
| BS EN 415-10:2014 | Safety of packaging machines General Requirements |
| BS ISO 17842-2:2015 | Safety of amusement rides and amusement devices Operation and use |
| 12/30255089 DC : 0 | BS EN 16474 - PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
| ISO 6469-3:2011 | Electrically propelled road vehicles Safety specifications Part 3: Protection of persons against electric shock |
| I.S. EN 82079-1:2012 | PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS (IEC 82079-1:2012 (EQV)) |
| UNE-EN ISO 13482:2014 | Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
| 17/30352734 DC : 0 | BS EN 60947-5-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES |
| OHSAS 18002:2000 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
| CEI EN 50547 : 2014 | RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS |
| BS EN 61310-1:2008 | Safety of machinery. Indication, marking and actuation Requirements for visual, acoustic and tactile signals |
| DIN EN 16713-1:2016-08 | DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 11148-7:2012 | Hand-held non-electric power tools. Safety requirements Grinders |
| 12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| I.S. EN 62366-1:2015/AC:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| 12/30272176 DC : 0 | BS EN ISO 9094 - SMALL CRAFT - FIRE PROTECTION |
| 18/30351698 DC : 0 | BS EN ISO 20607 - SAFETY OF MACHINERY - INSTRUCTION HANDBOOK - GENERAL DRAFTING PRINCIPLES |
| I.S. EN 14033-2:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
| PREN 1648-1 : DRAFT 2017 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| NF EN ISO 80601-2-12 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| BS EN 61010-2-012:2016 | Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
| 05/30135208 DC : DRAFT JUN 2005 | ISO 20712-1 - WATER SAFETY SIGNS AND BEACH SAFETY FLAGS - PART 1: SPECIFICATIONS FOR WATER SAFETY SIGNS USED IN WORKPLACES AND PUBLIC AREAS |
| ISO 6185-3:2014 | Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| ISO 10637:1999 | Dental equipment High- and medium-volume suction systems |
| BS EN 16774:2016 | Safety of machinery. Safety requirements for steel converter and associated equipment |
| 16/30298078 DC : 0 | BS EN 82079-1 ED 2.0 - PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS |
| DIN EN ISO 11148-10:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) |
| DIN EN ISO 28139:2010-05 | Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009) |
| CSA C22.2 No. 80601-2-55 : 2014(R2019) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| ISO 20381:2009 | Mobile elevating work platforms Symbols for operator controls and other displays |
| UNI EN ISO 11148-11 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
| I.S. EN 50628:2016 | ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
| UNE-EN 1672-1:2015 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| I.S. EN ISO 28881:2013 | MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES (ISO 28881:2013) |
| UNI EN 16276 : 2013 | EVACUATION LIGHTING IN ROAD TUNNELS |
| I.S. EN 61010-2-012:2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| BS EN ISO 15223-1:2016 | Medical devices. Symbols to be used with medical device labels, labelling and information to be supplied General requirements |
| ISO 24409-2:2014 | Ships and marine technology — Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings — Part 2: Catalogue |
| I.S. EN 16228-1:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| I.S. EN ISO 80601-2-72:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015) |
| I.S. EN ISO 12217-2:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 2: SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-2:2015) |
| UNI EN ISO 11148-3 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
| DIN EN ISO 6185-4:2011-10 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| I.S. EN 50636-2-92:2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-92: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED MAINS-OPERATED LAWN SCARIFIERS AND AERATORS |
| I.S. EN ISO 13482:2014 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
| I.S. EN 61010-2-010:2014 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-010: PARTICULAR REQUIREMENTS FOR LABORATORY EQUIPMENT FOR THE HEATING OF MATERIALS |
| I.S. EN ISO/IEC 80079-38:2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012) |
| I.S. EN 16237:2013 | CLASSIFICATION OF NON-ELECTRICAL SOURCES OF INCOHERENT OPTICAL RADIATION |
| CEN ISO/TR 22100-1:2017 | Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015) |
| ISO 13297:2014 | Small craft Electrical systems Alternating current installations |
| I.S. EN 16713-1:2016 | DOMESTIC SWIMMING POOLS - WATER SYSTEMS - PART 1: FILTRATION SYSTEMS - REQUIREMENTS AND TEST METHODS |
| ISO 28564-2:2016 | Public information guidance systems — Part 2: Guidelines for the design and use of location signs and direction signs |
| CEI EN 61010-2-012 : 1ED 2017 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| CSA C22.2 No. 60601-1-12 : 2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT |
| I.S. EN 60601-1-11:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT |
| PREN 17003 : DRAFT 2016 | ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| PD CEN ISO/TR 22100-1:2017 | Safety of machinery. Relationship with ISO 12100 How ISO 12100 relates to type-B and type-C standards |
| BS EN ISO 6185-3:2014 | Inflatable boats Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| EN IEC 62820-2:2018 | Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS) |
| UNI EN 1648-1 : 2012 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| UNE-EN ISO 13297:2015 | Small craft - Electrical systems - Alternating current installations (ISO 13297:2014) |
| CEI EN 50636-2-92 : 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-92: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED MAINS-OPERATED LAWN SCARIFIERS AND AERATORS |
| I.S. EN ISO 15223-1:2016 | MEDICAL DEVICES - SYMBOLS TO BE USED WITH MEDICAL DEVICE LABELS, LABELLING AND INFORMATION TO BE SUPPLIED - PART 1: GENERAL REQUIREMENTS (ISO 15223-1:2016, CORRECTED VERSION 2017-03) |
| UNI EN ISO 6185-3 : 2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER |
| ISO/TR 22100-1:2015 | Safety of machinery Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-B and type-C standards |
| ISO 15223-2:2010 | Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation |
| EN ISO 12217-3:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
| ISO 3864-3:2012 | Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs |
| ISO 13022:2012 | Medical products containing viable human cells — Application of risk management and requirements for processing practices |
| I.S. EN 80416-3:2002 | BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS |
| I.S. EN ISO 80601-2-12:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011) |
| IEC 62820-2:2017 | Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS) |
| I.S. EN 60745-1:2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| S.R. CEN/TS 15989:2015 | FIREFIGHTING AND RESCUE SERVICE VEHICLES AND EQUIPMENT - GRAPHICAL SYMBOLS FOR CONTROL ELEMENTS AND DISPLAYS AND FOR MARKINGS |
| I.S. EN 61310-1:2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS |
| ISO 11192:2005 | Small craft Graphical symbols |
| IEC 62648:2012+AMD1:2015 CSV | Graphical symbols for use on equipment - Guidelines for theinclusion of graphical symbols in IEC publications |
| IEC 60335-2-23:2016 | Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care |
| IEC 60364-7-721:2017 | Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans |
| ISO 80601-2-12:2011 | Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
| DIN EN 13732:2013-10 | Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene |
| 12/30272980 DC : 0 | BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 45545-7:2013 | Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations |
| IEC 62052-31:2015 | Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests |
| ISO 11148-6:2012 | Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners |
| IEC 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| 13/30277685 DC : 0 | BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| BS EN 13782:2015 | Temporary structure. Tents. Safety |
| ISO 11148-1:2011 | Hand-held non-electric power tools Safety requirements Part 1: Assembly power tools for non-threaded mechanical fasteners |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| BS EN 1069-2:2017 | Water slides Instructions |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
| IEC 60335-2-24:2010+AMD1:2012+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers |
| IEC 62477-1:2012+AMD1:2016 CSV | Safety requirements for power electronic converter systems and equipment - Part 1: General |
| UNE-EN 16228-1:2015 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| BS EN 14710-1 : 2005 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| ISO 80601-2-72:2015 | Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| BS EN 12312-4:2014 | Aircraft ground support equipment. Specific requirements Passenger boarding bridges |
| BS EN 671-2:2001 | Fixed fire fighting systems. Hose systems Hose systems with lay-flat hose |
| UNE-EN ISO 15223-1:2017 | Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO 15223-1:2016, Corrected version 2017-03) |
| ISO 13482:2014 | Robots and robotic devices Safety requirements for personal care robots |
| IEC 60601-2-33:2010+AMD1:2013+AMD2:2015 CSV | Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis |
| ISO 11148-2:2011 | Hand-held non-electric power tools Safety requirements Part 2: Cutting-off and crimping power tools |
| ISO 16315:2016 | Small craft Electric propulsion system |
| ISO 11148-9:2011 | Hand-held non-electric power tools Safety requirements Part 9: Die grinders |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
| CAN/CSA-C22.2 No. 62841-1 : 2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 13782:2016 | Temporary structure - Tents - Safety |
| IEC 60335-2-70:2002+AMD1:2007+AMD2:2013 CSV | Household and similar electrical appliances - Safety - Part 2-70:Particular requirements for milking machines |
| ISO 11148-8:2011 | Hand-held non-electric power tools Safety requirements Part 8: Sanders and polishers |
| ISO 21542:2011 | Building construction Accessibility and usability of the built environment |
| IEC 62282-6-100:2010+AMD1:2012 CSV | Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety |
| IEC 80416-3:2002+AMD1:2011 CSV | Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols |
| ISO 11148-11:2011 | Hand-held non-electric power tools Safety requirements Part 11: Nibblers and shears |
| UNE-EN 62282-5-1:2013 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| ISO/TR 22411:2008 | Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| UNE-ISO 21542:2012 | Building construction. Accessibility and usability of the built environment. |
| IEC 60335-2-34:2012+AMD1:2015+AMD2:2016 CSV | Household and similar electrical appliances - Safety - Part 2-34:Particular requirements for motor-compressors |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Part 2: Residential applications |
| ISO 11148-5:2011 | Hand-held non-electric power tools Safety requirements Part 5: Rotary percussive drills |
| BS EN 422:2009 | Plastics and rubber machines. Blow moulding machines. Safety requirements |
| ISO 11681-2:2011 | Machinery for forestry Portable chain-saw safety requirements and testing Part 2: Chain-saws for tree service |
| BS EN 671-1:2012 | Fixed firefighting systems. Hose systems Hose reels with semi-rigid hose |
| BS EN 378-2:2016 | Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation |
| BS ISO 14990-1:2016 | Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements |
| BS EN 1710 : 2005 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| ISO 11148-7:2012 | Hand-held non-electric power tools — Safety requirements — Part 7: Grinders |
| ISO 11148-10:2011 | Hand-held non-electric power tools Safety requirements Part 10: Compression power tools |
| UNE-EN 203-2-7:2014 | Gas heated catering equipment - Part 2-7: Specific requirements - Salamanders and rotisseries |
| UNE-EN 80416-3:2003 | Basic principles for graphical symbols for use on equipment -- Part 3: Guidelines for the application of graphical symbols |
| BS EN 536:2015 | Road construction machines. Mixing plants for road construction materials. Safety requirements |
| BS EN 60601-2-33 : 2010 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-33: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSIS |
| I.S. EN 15567-1:2015 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| EN 82079-1:2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| ISO 21482:2007 | Ionizing-radiation warning — Supplementary symbol |
| BS EN 50122-1 : 2011 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| BS EN 81-73:2016 | Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts Behaviour of lifts in the event of fire |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| DIN EN 13743:2017-04 | SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN 16774:2016 | Safety of machinery - Safety requirements for steel converter and associated equipment |
| EN ISO 11148-8:2011 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) |
| EN 13637:2015 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| EN 536:2015 | Road construction machines - Mixing plants for road construction materials - Safety requirements |
| EN 415-10:2014 | Safety of packaging machines - Part 10: General Requirements |
| EN 16237:2013 | Classification of non-electrical sources of incoherent optical radiation |
| EN ISO 80601-2-72:2015 | Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015) |
| EN 422:2009 | Plastics and rubber machines - Blow moulding machines - Safety requirements |
| EN ISO 11148-7:2012 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012) |
| EN ISO 16923:2018 | Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016) |
| ONORM S 4720 : 2012 | PLAY EQUIPMENT IN THE WATER AREA OF PUBLIC BATHS - TECHNICAL SAFETY REQUIREMENTS |
| EN ISO 11148-6:2012 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) |
| EN 1672-1:2014 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| EN ISO 11148-4:2012 | Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) |
| EN ISO 11148-12:2012 | Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
| EN 203-2-7:2014 | Gas heated catering equipment - Part 2-7: Specific requirements - Salamanders and rotisseries |
| EN ISO 11148-2:2011 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011) |
| EN 16713-1:2016 | Domestic swimming pools - Water systems - Part 1: Filtration systems - Requirements and test methods |
| EN 16186-2:2017 | Railway applications - Driver's cab - Part 2: Integration of displays, controls and indicators |
| EN 14033-2:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 2: Technical requirements for travelling and working |
| EN ISO 16315:2016 | Small craft - Electric propulsion system (ISO 16315:2016, Corrected version 2021-11) |
| EN ISO 12217-1:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) |
| EN ISO 11148-5:2011 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) |
| EN 13782:2015 | Temporary structure - Tents - Safety |
| EN ISO 13482:2014 | Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
| EN ISO 11148-1:2011 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
| EN 14033-1:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running |
| EN ISO 11148-3:2012 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012) |
| EN ISO 11148-11:2011 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) |
| EN 14710-1:2005+A2:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements |
| EN 1838:2013 | Lighting applications - Emergency lighting |
| EN 16712-2:2015 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 2: Pick-up tubes |
| EN 15194:2017 | Cycles - Electrically power assisted cycles - EPAC Bicycles |
| EN ISO 12217-2:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) |
| EN 13732:2013 | Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene |
| EN ISO 11148-9:2011 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) |
| EN 671-2:2012 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| EN 1648-2:2018 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2: Motor caravans |
| EN 15572:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines |
| EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
| EN ISO 11148-10:2011 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) |
| EN 15180:2014 | Food processing machinery - Food depositors - Safety and hygiene requirements |
| EN 1648-1:2018 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans |
| EN 16263-5:2015 | Pyrotechnic articles - Other pyrotechnic articles - Part 5: Minimum labelling requirements and instructions for use |
| EN 16276:2013 | Evacuation Lighting in Road Tunnels |
| EN 671-1:2012 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| EN ISO 9094:2017 | Small craft - Fire protection (ISO 9094:2015) |
| 11/30214919 DC : 0 | BS ISO 3864-3 - GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3: DESIGN PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE IN SAFETY SIGNS |
| UNE-EN 16712-2:2016 | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 2: Pick-up tubes |
| DIN EN ISO 81060-1:2012-08 | Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007) |
| BS EN 60601-1-11:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
| UNI EN ISO 13482 : 2014 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS |
| DIN EN ISO 15223-1:2015-08 (Draft) | MEDICAL DEVICES - SYMBOLS TO BE USED WITH MEDICAL DEVICE LABELS, LABELLING AND INFORMATION TO BE SUPPLIED - PART 1: GENERAL REQUIREMENTS (ISO 15223-1:2016, CORRECTED VERSION 2017-03) |
| DIN 14461-1:2016-10 | DELIVERY VALVE INSTALLATIONS FOR FIREFIGHTING PURPOSES - PART 1: WALL HYDRANTS WITH SEMI-RIGID HOSE |
| UNI EN ISO 11148-7 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
| I.S. EN ISO 11148-9:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011) |
| PD IEC/TS 62835:2015 | Electric toasters for household and similar use. Methods and measurements for improving accessibility |
| BS EN ISO 11148-3:2012 | Hand-held non-electric power tools. Safety requirements Drills and tappers |
| 18/30374371 DC : DRAFT MAY 2018 | BS ISO 24409-1 - SHIPS AND MARINE TECHNOLOGY - DESIGN, LOCATION AND USE OF SHIPBOARD SAFETY SIGNS, FIRE CONTROL PLAN SIGNS, SAFETY NOTICES AND SAFETY MARKINGS - PART 1: DESIGN PRINCIPLES |
| UNI EN 16264 : 2014 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
| CEI EN 50636-2-94 : 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-94: PARTICULAR REQUIREMENTS FOR SCISSORS TYPE GRASS SHEARS |
| DIN ISO 3864-3:2012-11 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 3: DESIGN PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE IN SAFETY SIGNS (ISO 3864-3:2012) |
| DIN EN ISO 11148-4:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012) |
| 17/30314278 DC : 0 | BS ISO 1496-2 - SERIES 1 FREIGHT CONTAINERS - SPECIFICATION AND TESTING - PART 2: THERMAL CONTAINERS |
| 15/30264711 DC : 0 | BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
| 16/30328756 DC : 0 | BS EN 13814-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE |
| CEI EN 60335-2-77 : 2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| 13/30284622 DC : 0 | BS 8599-2 - MOTOR VEHICLE FIRST AID KITS - PART 2: SPECIFICATION FOR THE CONTENTS OF MOTOR VEHICLE FIRST AID KITS |
| BS EN ISO 28881:2013 | Machine tools. Safety. Electro-discharge machines |
| I.S. EN ISO 11148-4:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012) |
| UNE-ISO 15817:2013 | Earth-moving machinery. Safety requirements for remote operator control systems |
| 12/30267985 DC : 0 | BS EN 60601-2-33:2010/A1 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-33: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSIS |
| 16/30322000 DC : 0 | BS ISO 16069 - GRAPHICAL SYMBOLS - SAFETY SIGNS - SAFETY WAY GUIDANCE SYSTEMS (SWGS) |
| 13/30279160 DC : 0 | BS EN 6101-2-0120 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, LABORATORY USE - PART 2-0120: PARTICULAR SAFETY REQUIREMENTS FOR MACHINERY |
| PREN 15571 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| BS ISO 19027:2016 | Design principles for communication support board using pictorial symbols |
| 14/30260340 DC : 0 | BS 5499-10 - GUIDANCE FOR THE SELECTION AND USE OF SAFETY SIGNS AND FIRE SAFETY NOTICES |
| BS ISO 21482:2007 | Ionizing-radiation warning. Supplementary symbol |
| ISO 16069:2017 | Graphical symbols — Safety signs — Safety way guidance systems (SWGS) |
| BS PD ISO/TR 22100-1 : 2015 | SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS |
| I.S. EN 1648-2:2018 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| 09/30196808 DC : 0 | BS ISO 11806-1 - AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES WITH INTEGRAL COMBUSTION ENGINE |
| 17/30358108 DC : 0 | BS EN 17125 - DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 16237:2013 | Classification of non-electrical sources of incoherent optical radiation |
| DIN EN ISO 11148-7:2013-01 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012) |
| 12/30251615 DC : 0 | BS ISO 9186-3 - GRAPHICAL SYMBOLS - TEST METHODS - PART 3: METHODS FOR TESTING RECOGNISABILITY |
| EN ISO 28139:2009 | Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009) |
| BS ISO 9186-2:2008 | Graphical symbols. Test methods Method for testing perceptual quality |
| BS ISO 6966-2:2014 | Aircraft ground equipment. Basic requirements Safety requirements |
| BS EN ISO 16923:2018 | Natural gas fuelling stations. CNG stations for fuelling vehicles |
| DIN ISO 3864-1:2012-06 | Graphical symbols - Safety colours and safety signs - Part 1: Design principles for safety signs and safety markings (ISO 3864-1:2011) |
| BS ISO 19385:2017+A1:2019 | Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for water jetting or water blasting applications - Specification |
| BS EN ISO 11148-9:2011 | Hand-held non-electric power tools. Safety requirements Die grinders |
| 09/30203808 DC : 0 | BS EN ISO 80601-2-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| UNE-EN 15571:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| 16/30339195 DC | BS EN 81-41. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Part 41. Vertical lifting platforms intended for use by persons with impaired mobility |
| ISO 9094:2015 | Small craft — Fire protection |
| BS ISO 16923 : 2016 | NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES |
| PD ISO/IEC GUIDE 51:2014 | Safety aspects. Guidelines for their inclusion in standards |
| NF EN 60335-2-77 : 2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| PD CEN/TS 15989:2015 | Firefighting and rescue service vehicles and equipment. Graphical symbols for control elements and displays and for markings |
| 04/19984571 DC : DRAFT APR 2004 | BS ISO 13732-1 - ERGONOMICS OF THE THERMAL ENVIRONMENT - METHOD FOR THE ASSESSMENT OF RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES |
| BIS IS/ISO 12643-1 : 2009 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 16740:2016 | Emission safety of combustible air fresheners - User safety information |
| 16/30286818 DC : 0 | BS ISO/IEC 24779-4 - INFORMATION TECHNOLOGY - CROSS-JURISDICTIONAL AND SOCIETAL ASPECTS OF IMPLEMENTATION OF BIOMETRIC TECHNOLOGIES - PICTOGRAMS, ICONS AND SYMBOLS FOR USE WITH BIOMETRIC SYSTEMS - PART 4: FINGERPRINT APPLICATIONS |
| EN IEC 61010-2-120:2018 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment |
| BS EN 62366-1:2015 | Medical devices Application of usability engineering to medical devices |
| BS EN 1829-2:2008 | High-pressure water jet machines. Safety requirements Hoses, hose lines and connectors |
| BS 5499-10:2014 | Guidance for the selection and use of safety signs and fire safety notices |
| BS EN ISO 11148-4:2012 | Hand-held non-electric power tools. Safety requirements Non-rotary percussive power tools |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| NF EN 61310-2 : 2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
| 16/30312315 DC : 0 | BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| BS EN 16186-2:2017 | Railway applications. Driver\'s cab Integration of displays, controls and indicators |
| CSA ISO/IEC 13251 : 2005 : R2015 | COLLECTION OF GRAPHICAL SYMBOLS FOR OFFICE EQUIPMENT |
| BS EN ISO 13297:2014 | Small craft. Electrical systems. Alternating current installations |
| UNI ISO 23601 : 2014 | SAFETY IDENTIFICATION - ESCAPE AND EVACUATION PLAN SIGNS |
| 09/30176666 DC : 0 | BS EN 62079 - PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION |
| CEI EN 50636-2-107 : 2016 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-107: PARTICULAR REQUIREMENTS FOR ROBOTIC BATTERY POWERED ELECTRICAL LAWNMOWERS |
| CEI EN 82079-1 : 2013 | PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS |
| DIN EN 13637:2015-12 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| C22.2 NO. 243-17 | Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017) |
| DIN EN ISO 80601-2-69:2014-12 | Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014) |
| UNE-EN 16263-5:2016 | Pyrotechnics articles - Other pyrotechnic articles - Part 5: Minimum labelling requirements and instructions for use |
| CSA C22.2 No. 60335-2-89 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT UNIT OR COMPRESSOR |
| SAE ARP 503 : 2015 | EMERGENCY EVACUATION ILLUMINATION |
| I.S. EN 50547:2013 | RAILWAY APPLICATIONS - BATTERIES FOR AUXILIARY POWER SUPPLY SYSTEMS |
| I.S. EN ISO 11148-2:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011) |
| EN 60601-1-11:2015 | Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
| EN 60335-2-89:2010/A2:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR (IEC 60335-2-89:2010/A2:2015, MODIFIED) |
| I.S. EN ISO 80601-2-55:2018 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS (ISO 80601-2-55:2018) |
| ISO 18758-2:2018 | Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements |
| I.S. EN ISO 11148-7:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012) |
| I.S. EN ISO 11148-11:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011) |
| ISO 15817:2012 | Earth-moving machinery — Safety requirements for remote operator control systems |
| I.S. EN 16740:2015 | EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - USER SAFETY INFORMATION |
| EN 60335-2-77:2010 | Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
| I.S. EN ISO 16923:2018 | NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016) |
| I.S. EN IEC 61010-2-120:2018 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-120: PARTICULAR SAFETY REQUIREMENTS FOR MACHINERY ASPECTS OF EQUIPMENT |
| I.S. EN 50434:2014 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PARTICULAR REQUIREMENTS FOR MAINS OPERATED SHREDDERS AND CHIPPERS |
| I.S. EN IEC 62928:2018 | RAILWAY APPLICATIONS - ROLLING STOCK - ONBOARD LITHIUM-ION TRACTION BATTERIES |
| NF EN 15288-1 : 2008 + A1 2010 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| 17/30360253 DC : 0 | BS EN 15288-1 - SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| I.S. EN 1829-2:2008 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND CONNECTORS |
| ISO/IEC 13251:2004 | Collection of graphical symbols for office equipment |
| I.S. EN 62052-31:2016 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS |
| ISO 6966-2:2014 | Aircraft ground equipment — Basic requirements — Part 2: Safety requirements |
| I.S. EN ISO 80601-2-69:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT (ISO 80601-2-69:2014) |
| UNI CEI EN ISO 18365 : 2014 | HYDROMETRY - SELECTION, ESTABLISHMENT AND OPERATION OF A GAUGING STATION |
| NF ISO 28564-1 : 2011 | PUBLIC INFORMATION GUIDANCE SYSTEMS - PART 1: DESIGN PRINCIPLES AND ELEMENT REQUIREMENTS FOR LOCATION PLANS, MAPS AND DIAGRAMS |
| NF EN 1829-1 : 2010 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES |
| ISO 12217-3:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m |
| S.R. CEN ISO/TR 22411:2011 | ERGONOMICS DATA AND GUIDELINES FOR THE APPLICATION OF ISO/IEC GUIDE 71 TO PRODUCTS AND SERVICES TO ADDRESS THE NEEDS OF OLDER PERSONS AND PERSONS WITH DISABILITIES |
| UNI EN 1672-1 : 2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| UNE-EN ISO 12217-1:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) |
| UNI EN ISO 11148-10 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
| EN ISO 6185-4:2011 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| I.S. EN ISO 11148-5:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011) |
| UNE-EN 82079-1:2015 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| ISO 9186-3:2014 | Graphical symbols — Test methods — Part 3: Method for testing symbol referent association |
| ISO 6185-4:2011 | Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| ISO 5149-2:2014 | Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation |
| I.S. EN 14033-1:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| I.S. EN 60335-2-77:2010 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| I.S. EN 60519-1:2015 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 12217-1:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 1: NON-SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-1:2015) |
| EN 62477-1:2012/A1:2017 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016) |
| EN 62282-6-100:2010/A1:2012 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010/A1:2012) |
| EN 60601-2-33:2010/A12:2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-33: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSIS |
| DIN EN ISO 11681-2:2012-04 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011 + AMD 1:2017) |
| DIN EN 1069-2:2015-09 (Draft) | WATER SLIDES - PART 2: INSTRUCTIONS |
| DIN EN 203-2-7:2016-05 (Draft) | GAS HEATED CATERING EQUIPMENT - PART 2-7: SPECIFIC REQUIREMENTS - SALAMANDERS AND ROTISSERIES |
| BS ISO 5149-2:2014 | Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation |
| UNE-EN 12312-4:2015 | Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges |
| IEC 82079-1:2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| UNE-EN 1069-2:2017 | Water slides - Part 2: Instructions |
| BS EN 13732:2013 | Food processing machinery. Bulk milk coolers on farms. Requirements for performance, safety and hygiene |
| BS EN ISO 11681-2 : 2011 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011) |
| 12/30251569 DC | BS IEC 62128-1. Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Part 1. Protective provisions against electric shock |
| BS EN 50628:2016 | Erection of electrical installations in underground mines |
| 16/30354067 DC : 0 | BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY |
| ISO 28881:2013 | Machine tools Safety Electro-discharge machines |
| IEC 61010-2-010:2014 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials |
| IEC 60745-1:2006 | Hand-held motor-operated electric tools - Safety - Part 1: General requirements |
| ISO 11148-3:2012 | Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers |
| BS EN 203-2-7:2014 | Gas heated catering equipment Specific requirements. Salamanders and rotisseries |
| ISO 11148-12:2012 | Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws |
| BS EN ISO 13732-1:2008 | Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces Hot surfaces |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
| EN 50570:2013/A1:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| EN 80416-3:2002/A1:2011 | BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS |
| DIN EN ISO 11192:2006-03 | SMALL CRAFT - GRAPHICAL SYMBOLS |
| EN ISO 81060-1:2012 | Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007) |
| DIN EN 15567-1:2015-08 | SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS |
| EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012) |
| EN 45545-7:2013 | Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN 671-2:2012-07 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| DIN EN 671-1:2012-07 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| EN 50547:2013 | Railway applications - Batteries for auxiliary power supply systems |
| DIN EN 14710-1:2009-06 | Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements |
| EN 50636-2-92:2014 | Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators |
| DIN EN 14033-1:2017-10 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
| DIN EN 1829-2:2012-02 | High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors (includes Corrigendum AC:2011) |
| BS 4163:2014 | Health and safety for design and technology in educational and similar establishments. Code of practice |
| EN 50628:2016 | Erection of electrical installations in underground mines |
| EN 50434:2014 | Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| EN 50122-1:2011/A4:2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| CSA C22.2 No. 60745.1 : 2007 : R2012 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CAN/CSA-C22.2 NO. 60335-2-34:17 | Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors (Binational standard with UL 60335-2-34) |
| CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60335.2.24 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE-MAKERS |
| CSA C22.2 No. 60745.1 : 2007 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : FR | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA E60335-2-11:13 (R2019) | Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers (Adopted IEC 60335-2-11:2008 + A1:2012, edition 7:2008 consolidated with amendment 1:2012, with Canadian deviations) | Appareils électrodomestiques et analogues - Sécurité - Partie 2-11: Règles particulières pour les sèche-linge à tambour. (norme CEI 60335- 2-11:2008 + A1:2012 adoptée, édition 7:2008 consolidée par l\'amendement 1:2012, avec exigences propres au Canada) |
| CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : R2012 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60745.1 : 2007 : INC : UPD 3 : 2013 : R201200 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60745.1 : 2007 (R2017) | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| AS/NZS 60335.2.2:2020 | Household and similar electrical appliances - Safety Particular requirements for vacuum cleaners and water-suction cleaning appliances (IEC 60335-2-2 Ed 7, MOD) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.