ISO 701:1998
Current
Current
The latest, up-to-date edition.
International gear notation Symbols for geometrical data
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
14-05-1998
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DevelopmentNote |
Also numbered as BS 2519-2(1976) (06/2005)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BIS IS 2467 : 2002 | Identical |
| NEN ISO 701 : 2000 | Identical |
| SAC GB/T 2821 : 2003 | Identical |
| BS ISO 701:1998 | Identical |
| NF ISO 701 : 1998 | Identical |
| PN ISO 701 : 2001 | Identical |
| UNE 18033:1984 | Identical |
| UNI ISO 701:2024 | Identical |
| BS 436-4:1996 | Spur and helical gears Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth |
| DIN 3960:1987-03 | DEFINITIONS, PARAMETERS AND EQUATIONS FOR INVOLUTE CYLINDRICAL GEARS AND GEAR PAIRS |
| BS ISO TR 10495:1997 | Cylindrical gears. Calculation of service life under variable load. Conditions for cylindrical gears in accordance with ISO 6336 |
| 04/30112626 DC : DRAFT APR 2004 | ISO 21771 - GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - CONCEPTS AND GEOMETRY |
| 04/30126840 DC : DRAFT DEC 2004 | BS ISO 6336-6 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 6: CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD |
| 11/30229116 DC : 0 | BS ISO 1328-1 - CYLINDRICAL GEARS - ISO SYSTEM OF TOLERANCE CLASSIFICATION - PART 1: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO CORRESPONDING FLANKS OF GEAR TEETH |
| BS ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Calculation of tooth bending strength |
| BS 5246:1976 | Specification for pinion type cutters for spur gears - 1 to 8 metric module |
| BS ISO 9084:2000 | Calculation of load capacity of spur and helical gears. Application to high speed gears and gears of similar requirements |
| ISO/TS 6336-20:2017 | Calculation of load capacity of spur and helical gears Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) Flash temperature method |
| AGMA ISO 1328 2 : 1999 | CYLINDRICAL GEARS - ISO SYSTEM OF ACCURACY - PART 2: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO RADIAL COMPOSITE DEVIATIONS AND RUNOUT INFORMATION |
| AGMA 1012 : 2005 | GEAR NOMENCLATURE, DEFINITIONS OF TERMS WITH SYMBOLS |
| AGMA ISO 6336-6 : A2008(R2014) | CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 6: CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD |
| PD ISO/TR 10828:2015 | Worm gears. Worm profiles and gear mesh geometry |
| ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load |
| DIN ISO 21771:2014-08 | Gears - Cylindrical involute gears and gear pairs - Concepts and geometry (ISO 21771:2007) |
| ISO/TR 10064-5:2005 | Code of inspection practice Part 5: Recommendations relative to evaluation of gear measuring instruments |
| BS ISO 9083:2001 | Calculation of load capacity of spur and helical gears. Application to marine gears |
| ISO/TR 10064-1:2017 | Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks |
| UNI EN ISO 14451-3 : 2013 | PYROTECHNIC ARTICLES - PYROTECHNIC ARTICLES FOR VEHICLES - PART 3: LABELLING |
| BS ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears Calculation of service life under variable load |
| 03/314803 DC : DRAFT SEP 2003 | ISO 6336-2 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING) |
| AGMA 2015/915-1 : A2002 | ACCURACY CLASSIFICATION SYSTEM - TANGENTIAL MEASUREMENT TOLERANCE TABLES FOR CYLINDRICAL GEARS |
| AGMA 2015-1 : A | ACCURACY CLASSIFICATION SYSTEM - TANGENTIAL MEASUREMENTS FOR CYLINDRICAL GEARS |
| ISO/TR 10828:2015 | Worm gears — Worm profiles and gear mesh geometry |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| I.S. EN ISO 14451-3:2013 | PYROTECHNIC ARTICLES - PYROTECHNIC ARTICLES FOR VEHICLES - PART 3: LABELLING (ISO 14451-3:2013) |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| ISO 2490:2007 | Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module — Nominal dimensions |
| ISO 14451-3:2013 | Pyrotechnic articles — Pyrotechnic articles for vehicles — Part 3: Labelling |
| BS ISO 1328-1:2013 | Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values of deviations relevant to flanks of gear teeth |
| 04/30117864 DC : DRAFT DEC 2004 | BS ISO 2490 - SOLID (MONOBLOC) GEAR HOBS WITH TENON DRIVE OR AXIAL KEYWAY, 0,5 TO 40 MODULE - NOMINAL DIMENSIONS |
| 05/30134748 DC : DRAFT JUNE 2005 | ISO 14521 - GEARS - CALCULATION OF LOAD CAPACITY OF WORMGEARS |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| UNE-EN ISO 14451-3:2013 | Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3: Labelling (ISO 14451-3:2013) |
| BS ISO 21771:2007 | Gears. Cylindrical involute gears and gear pairs. Concepts and geometry |
| BS ISO/TR 13989-1:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Flash temperature method |
| ISO 9083:2001 | Calculation of load capacity of spur and helical gears — Application to marine gears |
| ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
| BS ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Basic principles, introduction and general influence factors |
| DIN EN ISO 14451-3:2013-08 | PYROTECHNIC ARTICLES - PYROTECHNIC ARTICLES FOR VEHICLES - PART 3: LABELLING (ISO 14451-3:2013) |
| AGMA 915-2 : A | INSPECTION PRACTICES - PART 2: CYLINDRICAL GEARS - RADIAL MEASUREMENTS |
| BS ISO 10300-1:2014 | Calculation of load capacity of bevel gears Introduction and general influence factors |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
| AGMA 915-1 : A | INSPECTION PRACTICES - PART 1: CYLINDRICAL GEARS - TANGENTIAL MEASUREMENTS |
| ISO/TR 10495:1997 | Cylindrical gears Calculation of service life under variable loads Conditions for cylindrical gears according to ISO 6336 |
| ISO 9084:2000 | Calculation of load capacity of spur and helical gears Application to high speed gears and gears of similar requirements |
| ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
| ISO 21771:2007 | Gears — Cylindrical involute gears and gear pairs — Concepts and geometry |
| ISO 10300-1:2014 | Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors |
| AGMA ISO 10064-5 : A | CODE OF INSPECTION PRACTICE - PART 5: RECOMMENDATIONS RELATIVE TO EVALUATION OF GEAR MEASURING INSTRUMENTS |
| PD ISO/TR 14521:2010 | Gears. Calculation of load capacity of wormgears |
| BS ISO 9085:2002 | Calculation of load capacity of spur and helical gears. Application for industrial gears |
| BS ISO 2490:2007 | Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module. Nominal dimensions |
| BS ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Calculation of surface durability (pitting) |
| BS ISO/TR 10064-4:1998 | Code of inspection practice Recommendations relative to surface texture and tooth contact pattern checking |
| BS 436-5:1997 | Spur and helical gears Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| 03/314804 DC : DRAFT SEP 2003 | BS ISO 6336-3 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 3: CALCULATION OF TOOTH BENDING STRENGTH |
| PD ISO/TR 10064-1:2017 | Code of inspection practice Measurement of cylindrical gear tooth flanks |
| BS ISO TR 10064-2:1996 | Code of inspection practice Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| UNI ISO 6545 : 2009 | ACCEPTANCE CONDITIONS FOR GEAR HOBBING MACHINES - TESTING OF THE ACCURACY |
| PD ISO/TR 18792:2008 | Lubrication of industrial gear drives |
| ISO/TR 10064-2:1996 | Code of inspection practice Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| ISO/TR 10064-3:1996 | Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| ISO 1328-2:1997 | Cylindrical gears ISO system of accuracy Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| EN ISO 14451-3:2013 | Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3: Labelling (ISO 14451-3:2013) |
| ISO/TR 13593:1999 | Enclosed gear drives for industrial applications |
| 04/30126837 DC : DRAFT DEC 2004 | BS ISO 6336-1 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 1: BASIC PRINCIPLES, INTRODUCTION AND GENERAL INFLUENCE FACTORS |
| DIN 3990-1:1987-12 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS - INTRODUCTION AND GENERAL INFLUENCE FACTORS |
| BS EN ISO 14451-3:2013 | Pyrotechnic articles. Pyrotechnic articles for vehicles Labelling |
| BS ISO TR 10064-1:1992 | Code of inspection practice Inspection of corresponding flanks of gear teeth |
| DIN ISO 21771 E : 2014 | GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - CONCEPTS AND GEOMETRY (ISO 21771:2007) |
| BS ISO TR 10064-3:1996 | Code of inspection practice Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| PD ISO/TR 10064-5:2005 | Code of inspection practice Recommendations relative to evaluation of gear measuring instruments |
| ISO/TR 14521:2010 | Gears Calculation of load capacity of wormgears |
| ISO/TR 10064-4:1998 | Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.