ISO 683-5:2017
Current
The latest, up-to-date edition.
Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
19-07-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 683-5:2017 gives the technical delivery requirements for
- semi-finished products, e.g. blooms, billets, slabs (see note 1),
- bars (see note 1),
- wire rod,
- hot-rolled plates (see note 2), and
- hammer or drop forgings (see note 1)
manufactured from the nitriding steels listed in Table 3 and supplied in one of the heat-treatment conditions given for the different types of products in Table 1, rows 2 to 5, and in one of the surface conditions given in Table 2.
The steels are generally intended for the fabrication of quenched and tempered and, subsequently, nitriding machine parts.
The requirements for mechanical properties given in this document are restricted to the sizes given in Table 6.
NOTE 1 Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are in the following covered under semi-finished products or bars and not under the term "hammer and drop forgings".
NOTE 2 The term "plate" includes in the following also wide flats unless otherwise stated.
In special cases, variations in these technical delivery requirements or additions to these requirements can form the subject of an agreement at the time of enquiry and order (see 5.2 and Annex B).
In addition to this document, the general technical delivery requirements of ISO 404 are applicable.
| Committee |
ISO/TC 17/SC 4
|
| DevelopmentNote |
Supersedes ISO 683-10. (11/2014) Supersedes ISO/DIS 683-5. (07/2017)
|
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN ISO 683-5:2021 | Identical |
| I.S. EN ISO 683-5:2021 | Identical |
| BS EN ISO 683-5:2021 | Identical |
| EN ISO 683-5:2021 | Identical |
| ÖNORM EN ISO 683-5:2021 09 15 | Identical |
| NEN-ISO 683-5:2020 | Identical |
| PN-EN ISO 683-5:2021-10 | Identical |
| NEN-EN-ISO 683-5:2021 | Identical |
| BS ISO 683-5:2017 | Identical |
| UNE-EN ISO 683-5:2022 | Identical |
| ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
| ISO 683-2:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 2: Alloy steels for quenching and tempering |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
| ISO 683-3:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 3: Case-hardening steels |
| BS ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Strength and quality of materials |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| ISO 6929:2013 | Steel products — Vocabulary |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| EN 10085:2001 | Nitriding steels - Technical delivery conditions |
| ISO/TS 4949:2016 | Steel names based on letter symbols |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| ISO 16124:2015 | Steel wire rod — Dimensions and tolerances |
| ISO 4885:2017 | Ferrous materials Heat treatments Vocabulary |
| ISO 1035-3:1980 | Hot-rolled steel bars — Part 3: Dimensions of flat bars |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 1035-4:1982 | Hot-rolled steel bars — Part 4: Tolerances |
| ISO 7452:2013 | Hot-rolled steel plates — Tolerances on dimensions and shape |
| ISO 17577:2016 | Steel Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| ISO 1035-1:1980 | Hot-rolled steel bars — Part 1: Dimensions of round bars |
| ISO 7788:1985 | Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 1035-2:1980 | Hot-rolled steel bars — Part 2: Dimensions of square bars |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| SAE J 406 : 2009 | METHODS OF DETERMINING HARDENABILITY OF STEELS |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| SAC GB/T 3077 : 1999 | ALLOY STRUCTURE STEELS |
| ISO 683-2:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 2: Alloy steels for quenching and tempering |
| ISO 16160:2012 | Hot-rolled steel sheet products — Dimensional and shape tolerances |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 9443:1991 | Heat-treatable and alloy steels Surface quality classes for hot-rolled round bars and wire rods Technical delivery conditions |
| ISO 4954:1993 | Steels for cold heading and cold extruding |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.