ISO 683-17:2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
22-09-2023
Language(s)
English, French
Published date
15-10-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 683-17:2014 specifies the technical delivery requirements for five groups of wrought ball and roller bearing steels: through-hardening bearing steels (steels with about 1 % C and 1 % to 2 % Cr), case-hardening bearing steels, induction-hardening bearing steels (unalloyed and alloyed), stainless bearing steels, and high-temperature bearing steels.
| Committee |
ISO/TC 17/SC 4
|
| DevelopmentNote |
Supersedes ISO/DIS 683-17. (10/2014)
|
| DocumentType |
Standard
|
| Pages |
25
|
| ProductNote |
THIS STANDARD ALSO HAVE CORRECTED VERSION FOR FRENCH FOR THE YEAR 2015 .
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| DS EN ISO 683-17 : 2014 | Identical |
| NF EN ISO 683-17 : 2015 | Identical |
| NBN EN ISO 683-17 : 2014 | Identical |
| NEN EN ISO 683-17 : 2014 | Identical |
| NS EN ISO 683-17 : 2014 | Identical |
| I.S. EN ISO 683-17:2014 | Identical |
| PN EN ISO 683-17 : 2015 | Identical |
| UNE-EN ISO 683-17:2015 | Identical |
| SN EN ISO 683-17 : 2014 | Identical |
| UNI EN ISO 683-17 : 2014 | Identical |
| SS-EN ISO 683-17:2014 | Identical |
| IS 17111:2019 | Identical |
| BS EN ISO 683-17:2014 | Identical |
| EN ISO 683-17:2014 | Identical |
| DIN EN ISO 683-17:2015-02 | Identical |
| ONORM EN ISO 683-17 : 2015 | Identical |
| DIN 17230:1980-09 | Similar to |
| BS 970-4:1970 | Similar to |
| NFA 35 565 : 1994 | Similar to |
| BS ISO 6370-2:2011 | Vitreous and porcelain enamels. Determination of the resistance to abrasion Loss in mass after sub-surface abrasion |
| ISO 13412:1997 | Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Inch series |
| BS ISO 10792-1:1995 | Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner Metric series |
| 15/30287641 DC : 0 | BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
| 15/30303331 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| ISO 13414:1997 | Aerospace — Airframe needle roller bearings, single-row, shielded — Inch series |
| 15/30291038 DC : 0 | BS ISO 19291 - TESTING OF LUBRICANTS - TRIBOLOGICAL TEST IN THE TRANSLATORY OSCILLATION APPARATUS - DETERMINATION OF TRIBOLOGICAL QUANTITIES FOR OILS AND GREASES IN THE TRANSLATORY OSCILLATION APPARATUS |
| 07/30162058 DC : 0 | BS ISO 3290-1 - ROLLING BEARING - ROLLING ELEMENTS - PART 1: STEEL BALLS |
| ISO 14197:1998 | Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty — Inch series |
| ISO 14212:1998 | Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty — Inch series |
| 13/30279057 DC : 0 | BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
| ISO 13416:1997 | Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Metric series |
| ASTM A 485 : 2017 : REDLINE | Standard Specification for High Hardenability Antifriction Bearing Steel |
| ISO 14208:1998 | Aerospace — Airframe ball bearings, single-row, rigid, sealed, intermediate duty — Inch series |
| ISO 19291:2016 | Lubricants — Determination of tribological quantities for oils and greases — Tribological test in the translatory oscillation apparatus |
| ISO 14193:1998 | Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, extended inner ring intermediate duty — Inch series |
| ISO 6370-2:2011 | Vitreous and porcelain enamels Determination of the resistance to abrasion Part 2: Loss in mass after sub-surface abrasion |
| BS EN 14420-5:2013 | Hose fittings with clamp units Threaded connections |
| BS EN 13631-4:2002 | Explosives for civil uses. High explosives Determination of sensitiveness to impact of explosives |
| EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
| EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
| ISO 13415:1997 | Aerospace — Airframe needle track roller, stud type, single-row, sealed — Inch series |
| ISO 14203:1998 | Aerospace — Airframe ball bearings, single-row, rigid, diameter series 8 and 9 — Metric series |
| ASTM A 756 : 2017 : REDLINE | Standard Specification for Stainless Anti-Friction Bearing Steel |
| 15/30304304 DC : 0 | BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| BS EN ISO 12156-1:2016 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| ISO 14201:1998 | Aerospace — Airframe ball bearings, double-row, self-aligning, diameter series 2 — Metric series |
| PREN 12080 : DRAFT 2015 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| ISO 14214:1998 | Aerospace — Airframe ball bearings, double-row, rigid, sealed, heavy duty — Inch series |
| ASTM A 295/A295M : 2014 : REDLINE | Standard Specification for High-Carbon Anti-Friction Bearing Steel |
| DIN EN 12080:2015-06 (Draft) | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| BS EN 12080:2017 | Railway applications. Axleboxes. Rolling bearings |
| I.S. EN 14420-5:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| I.S. EN 12080:2017 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DIN EN 14420-5:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| DIN 611:2010-05 | Rolling bearings - Summary |
| DIN EN 13763-3:2002-12 | EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 3: DETERMINATION OF SENSITIVENESS TO IMPACT |
| DIN EN 12080:2017-11 | Railway applications - Axleboxes - Rolling bearings |
| BS IEC 62709:2014 | Radiation protection instrumentation. Security screening of humans. Measuring the imaging performance of X-ray systems |
| BS 2000-239(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-239: DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF FLUIDS - FOUR BALL METHOD (EUROPEAN CONDITIONS) |
| ISO 10792-1:1995 | Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 1: Metric series |
| BS ISO 19291:2016 | Lubricants. Determination of tribological quantities for oils and greases. Tribological test in the translatory oscillation apparatus |
| ISO 14206:1998 | Aerospace — Airframe ball bearings, single-row, rigid, sealed, light duty — Inch series |
| UNE-EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| DIN EN ISO 16120-1:2017-09 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| 02/121969 DC : DRAFT APR 2002 | ISO/DIS 20623 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF FLUIDS - FOUR BALL METHOD (EUROPEAN CONDITIONS) |
| BS ISO 10792-2:1995 | Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner Inch series |
| 17/30359115 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| BS EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire General requirements |
| DIN ISO 6370-2:2013-08 | Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2011) |
| ISO 14194:1998 | Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty — Inch series |
| ISO 5949:1983 | Tool steels and bearing steels Micrographic method for assessing the distribution of carbides using reference photomicrographs |
| PREN 13001-3-4 : DRAFT 2016 | CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
| ISO 14192:1998 | Aerospace — Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty — Metric series |
| ISO 14196:1998 | Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty — Inch series |
| IEC 62709:2014 | Radiation protection instrumentation - Security screening of humans - Measuring the imaging performance of X-ray systems |
| EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| UNI EN 14420-5 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| 16/30322061 DC : DRAFT MAR 2016 | BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
| ISO 13417:1997 | Aerospace — Airframe needle track roller, stud type, single-row, sealed — Metric series |
| ASTM A 534 : 2017 : REDLINE | Standard Specification for Carburizing Steels for Anti-Friction Bearings |
| ISO 13413:1997 | Aerospace — Airframe needle track roller, yoke type, double-row, sealed — Inch series |
| ISO 14191:1998 | Aerospace — Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 — Metric series |
| I.S. EN ISO 12156-1:2016 | DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016) |
| ISO 14216:1998 | Aerospace — Airframe ball bearings, double-row, self-aligning, sealed, heavy duty — Inch series |
| ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
| ISO 14210:1998 | Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty — Inch series |
| ISO 14195:1998 | Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, torque tube design, light duty — Inch series |
| ISO 14211:1998 | Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty — Inch series |
| ISO 14204:1998 | Aerospace — Airframe ball bearings, double-row, rigid, diameter series 0 — Metric series |
| ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire — Part 1: General requirements |
| UNE-EN 14420-5:2014 | Hose fittings with clamp units - Part 5: Threaded connections |
| BS EN 13763-3:2002 | Explosives for civil uses. Detonators and relays Determination of sensitiveness to impact |
| EN 13763-3:2002 | Explosives for civil uses - Detonators and relays - Part 3: Determination of sensitiveness to impact |
| EN 13631-4:2002 | Explosives for civil uses - High explosives - Part 4: Determination of sensitiveness to impact of explosives |
| EN 14420-5:2013 | Hose fittings with clamp units - Part 5: Threaded connections |
| I.S. EN ISO 16120-1:2017 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| ISO 14209:1998 | Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty — Inch series |
| ISO 683-4:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 4: Free-cutting steels |
| UNE-EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
| API 2C : 2012 | OFFSHORE PEDESTAL-MOUNTED CRANES |
| ISO 14202:1998 | Aerospace — Airframe ball bearings, single-row, rigid, diameter series 0 and 2 — Metric series |
| ISO 14217:1998 | Aerospace — Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty — Inch series |
| ISO 14207:1998 | Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, light duty — Inch series |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| ISO 5949:1983 | Tool steels and bearing steels Micrographic method for assessing the distribution of carbides using reference photomicrographs |
| ISO 6929:2013 | Steel products — Vocabulary |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| SAC GB/T 28417 : 2012 | CARBON BEARING STEEL |
| SAC GB/T 3203 : 1982 | CARBURIZING STEELS FOR BEARING |
| ISO/TS 4949:2016 | Steel names based on letter symbols |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| ISO 4969:2015 | Steel Etching method for macroscopic examination |
| ISO 16124:2015 | Steel wire rod — Dimensions and tolerances |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 22034-2:2016 | Steel wire and wire products Part 2: Tolerances on wire dimensions |
| ISO 1035-3:1980 | Hot-rolled steel bars — Part 3: Dimensions of flat bars |
| ISO 1035-4:1982 | Hot-rolled steel bars — Part 4: Tolerances |
| ISO 3763:1976 | Wrought steels — Macroscopic methods for assessing the content of non-metallic inclusions |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| SAC GB/T 18254 : 2002 | HIGH-CARBON CHROMIUM BEARING STEEL |
| EN 10278:1999 | Dimensions and tolerances of bright steel products |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| ISO 1035-1:1980 | Hot-rolled steel bars — Part 1: Dimensions of round bars |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 1035-2:1980 | Hot-rolled steel bars — Part 2: Dimensions of square bars |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| SAC GB/T 3086 : 2008 | HIGH CARBON CHROMIUM STAINLESS BEARING STEELS |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 9443:1991 | Heat-treatable and alloy steels Surface quality classes for hot-rolled round bars and wire rods Technical delivery conditions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.