ISO 5922:2005
Current
Current
The latest, up-to-date edition.
Malleable cast iron
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
01-03-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 5922:2005 specifies requirements for two types of malleable cast iron, namely whiteheart malleable cast iron and blackheart malleable cast iron, used in the manufacture of castings.
Classification is given for each type of malleable cast iron on the basis of mechanical properties determined on separately cast test pieces.
ISO 5922:2005 is applicable only to malleable cast iron cast into sand moulds or moulds of comparable thermal diffusivity.
| Committee |
ISO/TC 25
|
| DevelopmentNote |
Supersedes ISO 944, ISO 943 and ISO 942. (04/2001) Supersedes ISO/DIS 5922 (03/2005)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| AS 1832-2007 | Identical |
| NFA 32 701 : 1982 | Similar to |
| UNI ISO 5922 : 1983 | Identical |
| BS 6681:1986 | Similar to |
| 12/30255878 DC : 0 | BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS |
| 09/30205886 DC : 0 | BS EN 13789 - INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| PREN 1171 : DRAFT 2014 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| PD ISO/TR 10809-1:2009 | Cast irons Materials and properties for design |
| CSA 6.32:2012 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| BS EN 1562:2012 | Founding. Malleable cast irons |
| DIN EN ISO 945-1:2016-09 (Draft) | MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS |
| PREN 1992-4 : DRAFT 2013 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE |
| S.R. CEN TS 1992-4-1:2009 | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| DD CEN/TS 1992-4-1:2009 | Design of fastenings for use in concrete General |
| 13/30286967 DC : 0 | BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE |
| DIN EN 1562:2012-05 | FOUNDING - MALLEABLE CAST IRONS |
| DIN EN 13411-5:2009-02 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| CEN/TS 1992-4-1:2009 | Design of fastenings for use in concrete - Part 4-1: General |
| EN 13411-5:2003+A1:2008 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| EN 61284:1997 | Overhead lines - Requirements and tests for fittings |
| PD ISO/TR 945-3:2016 | Microstructure of cast irons Matrix structures |
| 16/30337687 DC : 0 | BS ISO 9788 - AIR CARGO - DOUBLE STUD TIE-DOWN FITTINGS - DESIGN AND TESTING REQUIREMENTS |
| UNI EN 1562 : 2012 | FOUNDING - MALLEABLE CAST IRONS |
| PREN 13789 : DRAFT 2009 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| BS ISO 10631:2013 | Metallic butterfly valves for general purposes |
| UNI CEN/TS 1992-4-1 : 2009 | DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| CSA 6.32 : 2012 : INC : ADD A : 2012 : R2016 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| 95/700260 DC : DRAFT JAN 1995 | PREN 1268-1 - SAFETY DEVICES FOR THE PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES |
| ISO 945-1:2017 | Microstructure of cast irons Part 1: Graphite classification by visual analysis |
| CEI EN 61284 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| ISO/TR 10809-1:2009 | Cast irons — Part 1: Materials and properties for design |
| ISO 9788:2017 | Air cargo — Double stud tie-down fittings — Design and testing requirements |
| ASTM F 1548 : 2001 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ASTM F 1548 : 2001 : R2012 | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| I.S. EN 1562:2012 | FOUNDING - MALLEABLE CAST IRONS |
| DIN EN 1171:2015-11 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| ISO 17885:2015 | Plastics piping systems Mechanical fittings for pressure piping systems Specifications |
| I.S. EN 1171:2015 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| I.S. EN 13789:2010 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| I.S. EN 13411-5:2003 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| I.S. EN 1092-2:1997 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 2: CAST IRON FLANGES |
| PREN 1562 : DRAFT 2009 | FOUNDING - MALLEABLE CAST IRONS |
| ISO/TR 15931:2004 | Designation system for cast irons and pig irons |
| EN 1562:2012 | Founding - Malleable cast irons |
| PREN 1268-1 : DRAFT 1994 | SAFETY DEVICES FOR THE PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES |
| ASTM F 1548 : 2001 : R2006 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ISO/TR 10809-2:2011 | Cast irons Part 2: Welding |
| UNI EN 13411-5 : 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| UNI EN 13789 : 2010 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| BS EN 1171:2015 | Industrial valves. Cast iron gate valves |
| PD ISO/TR 10809-2:2011 | Cast irons Welding |
| 14/30282872 DC : 0 | BS EN 1171 - INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| 12/30236280 DC : 0 | BS ISO 10631 - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| BS ISO 9788:2017 | Air cargo. Double stud tie-down fittings. Design and testing requirements |
| ISO/TR 945-3:2016 | Microstructure of cast irons Part 3: Matrix structures |
| UNE-EN 1562:2012 | Founding - Malleable cast irons |
| EN ISO 945-1:2018 | Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO 945-1:2017) |
| DIN EN 13789:2010-09 | Industrial valves - Cast iron globe valves |
| BS EN 13789:2002 | Industrial valves. Cast iron globe valves |
| BS EN 13411-5 : 2003 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS |
| ISO 14236:2000 | Plastics pipes and fittings Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems |
| BS EN 1092-2:1997 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Cast iron flanges |
| EN 13789:2010 | Industrial valves - Cast iron globe valves |
| 09/30187760 DC : DRAFT JULY 2009 | BS EN 1562 - FOUNDING - MALLEABLE CAST IRONS |
| BS EN 61284:1998 | Overhead lines. Requirements and tests for fittings |
| 17/30344317 DC : 0 | BS ISO 49 AMENDMENT 1 - MALLEABLE CAST IRON FITTINGS THREADED TO ISO 7-1 |
| BS ISO 17885:2015 | Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications |
| BS 6681:1986 | Specification for malleable cast iron |
| CSA 6.32 : 2012 : INC : ADD A : 2013 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| DIN 1692:1982-01 | MALLEABLE CAST IRON - CONCEPTS, PROPERTIES |
| XP CEN/TS 1992-4-1 : 2009 XP | DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL |
| ISO 10631:2013 | Metallic butterfly valves for general purposes |
| I.S. EN ISO 945-1:2018 | MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS (ISO 945-1:2017) |
| UNE-EN 1171:2016 | Industrial valves - Cast iron gate valves |
| EN 1171:2015 | Industrial valves - Cast iron gate valves |
| DIN EN ISO 945-1:2010-09 | MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS |
| CSA/ANSI LC 4 : 2012 : INC : ADD A : 2013 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| CSA/ANSI LC 4:2012 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| CSA/ANSI LC 4-2012 (R2017)/CSA 6.32-2012 (R2016) | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ASTM A 197M : 1987 | SPECIFICATION FOR CUPOLA MALLEABLE IRON (METRIC) |
| ISO 148:1983 | Steel — Charpy impact test (V-notch) |
| ISO/TR 15931:2004 | Designation system for cast irons and pig irons |
| ISO 945:1975 | Cast iron — Designation of microstructure of graphite |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.