ISO 5855-1:1999
Current
Current
The latest, up-to-date edition.
Aerospace MJ threads Part 1: General requirements
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
14-10-1999
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This part of ISO 5855 specifies the general requirements for MJ threads used in aerospace construction.
It determines the basic triangular profile for this type of thread and gives a system for designating the diameter and
pitch combinations. For all diameters 1,6 mm to 300 mm, it offers in the form of tables the basic dimensions and
tolerances for a selection of diameter and pitch combinations. It also provides the method of calculation for the
dimensions and tolerances for any diameter and pitch combination not given in the tables, including threads with a
diameter in excess of 300 mm.
For limit dimensions for bolts and nuts of nominal diameter 1,6 mm to 39 mm, see ISO 5855-2. For limit dimensions for
fittings for fluid systems, see ISO 5855-3.
| DevelopmentNote |
Also numbered as BS A358-1(2000) (05/2005)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 2067 : 1996 COR 1 1996 | Identical |
| NBN EN 2569 : 1993 | Identical |
| NBN EN 2609 : 1993 | Identical |
| NBN EN 2289 : 1996 | Identical |
| NBN EN 2356 : 1993 | Identical |
| NBN EN 2752 : 1993 | Identical |
| NBN EN 2357 : 1993 | Identical |
| PN ISO 5855-1 : 2005 | Identical |
| BIS IS 10980-1 : 2014 | Identical |
| NBN EN 2354 : 1993 | Identical |
| NBN EN 2601 : 1996 | Identical |
| NBN EN 2353 : 1993 | Identical |
| NBN EN 2515 : 1993 | Identical |
| NBN EN 2068 : 1996 COR 1 1996 | Identical |
| NBN EN 2498 : 1993 | Identical |
| UNE 28561-1:1983 | Identical |
| NBN EN 2355 : 1993 | Identical |
| BS 6293-1:1994 | Identical |
| DIN ISO 5855-1:2009-07 | Identical |
| BS 6293-1:1982 | Identical |
| NF ISO 5855-1 : 1990 | Identical |
| NFL 22-588 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, SINGLE LUG, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN CORROSION RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREE C |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| I.S. EN 3294:2008 | AEROSPACE SERIES - BOLTS, T-HEAD, CLOSE TOLERANCE, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), UNCOATED FOR INCREASED HEIGHT NUTS - CLASSIFICATION: 1210 MPA/730 DEGREES C |
| BS EN 2811:2016 | Aerospace series. Nuts, hexagon, slotted/castellated in steel cadmium plated. Classification. 1 100 MPa/235 °C |
| NFL 22-576 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SINGLE LUG, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREE C |
| NF EN 3636 : 2008 | AEROSPACE SERIES - SCREWS, REDUCED PAN HEAD, OFFSET CRUCIFORM RECESS, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 900 MPA/650 DEGREES C |
| NFL 22-455 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, REDUCED HEIGHT, ISO M OR ISO MJ THREADS, 4H TOLERANCE CLASS |
| 05/30141104 DC : 0 | BS EN 4623 - AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATING |
| NFL 22-457 : 2000 | BOULONNERIE AERONAUTIQUE - ECROUS HEXAGONAUX A CRENEAUX, HAUTEUR NORMALE, A FILETAGE ISO M OU ISO MJ, CLASSE DE TOLERANCE 4H |
| 13/30290552 DC : 0 | BS EN 4691-1 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| BS EN 3033:2008 | Aerospace series. Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601 (A286), uncoated. Classification: 1100 MPa/425°C |
| BS EN 3636:2008 | Aerospace series. Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa/650°C |
| NFL 22 443 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, WITH LOCKING HOLES, ISO M OR ISO MJ THREADS, 4H5H OR 5H TOLERENACE CLASS ACCORDING TO DIAMETER |
| I.S. EN 4619:2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - INSTALLATION AND REMOVAL PROCEDURE |
| PREN 2811 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED IN STEEL CADMIUM PLATED - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| XP PREN 2932 : 1993 XP | AEROSPACE SERIES - BOLTS T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286) SILVER PLATED - CLASSIFICATION: 900 MPA/650 DEGREE C |
| NFL 22-512 : 2001 | AIRCRAFT BOLTS AND NUTS - HEXAGONAL NUTS, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, ISO M THREADS, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100MPA (AT AMBIENT TEMPERATURE/235 DEGREES C |
| XP PREN 2942 : 1992 XP | AEROSPACE SERIES - INSERT, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN HEAT RESISTING ALLOY, NICKEL BASE ALLOY (INCO X750 - EN 3018), SILVER PLATED |
| STANAG 3323 : 0 | PIPE (TUBE) CONNECTIONS TO AIRCRAFT INSTRUMENTS (IMPERIAL AND METRIC) |
| PREN 3328 : 200P1 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE MEDIUM THREAD LENGTH, IN HEAT RESISTING STEEL FE-PM38 (FV535), UNCOATED - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| NF EN 3728 : 2008 | AEROSPACE SERIES - SHAFT-NUTS, SELF-LOCKING, LEFT-HAND THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| BS 6293-2:1982 | MJ threads for aerospace construction Specification for dimensions for bolts and nuts |
| PREN 4399 : 200P1 | AEROSPACE SERIES - RINGS, THREADED, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| PREN 3636 : 200P1 | AEROSPACE SERIES - SCREWS, REDUCED PAN HEAD, OFFSET CRUCIFORM RECESS, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE PA92HT (A286), SILVER PLATED - CLASSIFICATION: 900 MPA/650 DEGREES C |
| PREN 2603 : 200P1 | AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - PORT END - DIMENSIONS |
| PREN 3326 : 200P1 | AEROSPACE SERIES - BOLTS, D-HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCO 718) - CLASSIFICATION: 1275 MPA/650 DEGREES C, UNPLATED |
| PREN 2604 : 200P1 | AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - 8 DEGREES 30 MINUTES UNION INTERFACE - DIMENSIONS |
| PREN 2754 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING TWO LUG, FLOATING WITH COUNTERBORE - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| XP PREN 3044 : 1992 XP | AEROSPACE SERIES - INSTALLATION OF SELF-LOCKING THREAD INSERTS - DESIGN DIMENSIONS |
| PREN 2602 : 200P1 | AEROSPACE SERIES - PORTS FOR INSTALLATION OF STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - DIMENSIONS |
| PREN 3327 : 200P1 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE MEDIUM THREAD LENGTH IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), UNCOATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| PREN 4619 : 200P1 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - INSTALLATION AND REMOVAL PROCEDURE |
| PREN 4624 : 200P1 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY), SILVER PLATED |
| PREN 3729 : 200P1 | AEROSPACE SERIES - RINGS, THREADED, SELF-LOCKING, LEFT-HAND THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| PREN 3241 : 200P2 | AEROSPACE SERIES - NUTS, SELF-LOCKING, CLIP, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER COATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| I.S. EN 4399:2008 | AEROSPACE SERIES - RINGS, THREADED, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| PREN 3613 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| PREN 3686 : 200P1 | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL, FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| I.S. EN 4624:2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY), SILVER PLATE |
| NF EN 3613 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601(INCONEL 718) SILVER PLATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| I.S. EN 3707:2012 | AEROSPACE SERIES - HEADLESS THREADED PLUGS - INSTALLATION HOLES |
| NFL 22-440 : A | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, WITH LOCKING HOLES, LEFT-HAND ISO M OR ISO MJ THREADS, 4H TOLERANCE CLASS |
| NFL 22-436 : A | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, LEFT-HAND ISO M OR ISO MJ THREADS, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| I.S. EN 2606:2009 | AEROSPACE SERIES - 60 DEGREES INTERFACE FOR ADAPTORS, THREADED, WITH LOCKRING - GEOMETRIC CONFIGURATION |
| BS EN 2608:2005 | Aerospace series. Installation and removal requirements for 8° 30\' adaptors, threaded, with lockring |
| BS EN 3326:2007 | Aerospace series. Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718). Classification: 1275 MPa/650°C, unplated |
| BS EN 2569:1991 | Control cable fittings and turnbarrels. Technical specification |
| BS EN 2754:2006 | Aerospace series. Nuts, anchor, self locking, two lug, floating with counterbore. Classification: 1100 MPa/235°C |
| ONORM EN 3637 : APR 2009 | AEROSPACE SERIES - NUTS, SELF-LOCKING, BI-HEXAGONAL (DOUBLE REDUCED), IN HEAT RESISTING NICKEL BASE ALLOY - NI-P101HT (WASPALOY), SILVER PLATED - CLASSIFICATION: 1210 MPA/730 DEGREES C |
| NFL 22-437 : C | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT NORMAL ACROSS FLATS, WITH LOCKING HOLES, ISO M OR ISO MJ THREADS, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| NFL 22-434 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, LEFT-HAND ISO M OR ISO MJ THREADS, 4H TOLERANCE CLASS |
| UNI EN 3707 : 2012 | AEROSPACE SERIES - HEADLESS THREADED PLUGS - INSTALLATION HOLES |
| I.S. EN 2852:2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, HEAT RESISTING STEEL PASSIVATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| UNI EN 4624 : 2011 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY), SILVER PLATE |
| I.S. EN 4620:2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - DESIGN STANDARD |
| DIN 65349:2001-06 | AEROSPACE - TESTING OF LOCKING TORQUES FOR NUTS AND RELATED THREADED PARTS, WITH METRIC SCREW THREAD - TEST METHODS |
| BS ISO 10959:2016 | Aerospace. MJ threads. Gauging |
| NF EN 3637 : 2008 | AEROSPACE SERIES - NUTS, SELF-LOCKING, BI-HEXAGONAL (DOUBLE REDUCED), IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED - CLASSIFICATION: 1210 MPA/730 DEGREES C |
| NF EN 4621 : 2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, SELF-BROACHING KEYS - TECHNICAL SPECIFICATION |
| NFL 22-587 : 2013 | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, TWO LUG, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN CORROSION RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREE C |
| BS M 59:1986 | Specification for interface of metric couplings for aerospace fluid systems |
| BS EN 4396:2008 | Aerospace series. Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated |
| NFL 22-441 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, ISO M OR ISO MJ THREADS, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| UNI EN 3706 : 2012 | AEROSPACE SERIES - HEADLESS THREADED PLUGS, CROSS RECESS, IN ALUMINIUM ALLOY 5086 |
| NF EN 3729 : 2008 | AEROSPACE SERIES - RINGS, THREADED, SELF-LOCKING, LEFT-HAND THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| UNI EN 4622 : 2011 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED |
| NFL 22-439 : B | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, WITH LOCKING HOLES, ISO M OR ISO MJ THREADS, 4H TOLERANCE CLASS |
| UNI EN 4623 : 2011 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED |
| XP PREN 2943 : 1992 XP | AEROSPACE SERIES - WIRE THREAD INSERTS, PREVAILING TORQUE (SELF-LOCKING) - TECHNICAL SPECIFICATION |
| XP PREN 2935 : 1993 XP | AEROSPACE SERIES - BOLTS T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) UNPLATED - CLASSIFICATION: 1210 MPA/730 DEGREE C |
| NF EN 2852 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, HEAT RESISTING STEEL PASSIVATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| XP PREN 2944 : 1992 XP | AEROSPACE SERIES - INSERT, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN CORROSION RESISTING ALLOY (Z10CN18-09 - EN 2947), UNPLATED |
| PREN 3033 : 200P1 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER, IN HEAT RESISTING STEEL FE-PA92HT (A286), UNCOATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| I.S. EN 4621:2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, SELF-BROACHING KEYS - TECHNICAL SPECIFICATION |
| PREN 3034 : 200P1 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER COATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| DIN 65447:2016-08 | AEROSPACE SERIES - BIHEXAGONAL HEAD BOLTS, CLOSE TOLERANCE, WITH MEDIUM-LENGTH MJ THREAD, CORROSION RESISTING NICKEL ALLOY - NOMINAL TENSILE STRENGTH 1550 MPA, FOR TEMPERATURES UP TO 315 DEGREES C |
| PREN 3294 : 200P1 | AEROSPACE SERIES - BOLTS, T-HEAD, CLOSE TOLERANCE IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), UNCOATED FOR INCREASED HEIGHT NUTS - CLASSIFICATION: 1210 MPA/730 DEGREES C |
| PREN 3301 : 200P1 | AEROSPACE SERIES - BOLTS, T-HEAD, CLOSE TOLERANCE MEDIUM THREAD LENGTH IN HEAT RESISTING STEEL FE-PM38 (FV535), UNCOATED - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| NFL 22-451 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, NORMAL HEIGHT, ISO M OR ISO MJ THREADS, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| PREN 3323 : 200P1 | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PM38 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| NFL 22-438 : A | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, WITH LOCKING HOLES, LEFT-HAND ISO M OR ISO MJ THREADS, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| NF EN 4620 : 2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - DESIGN STANDARD |
| PREN 4691-1 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| PREN 4622 : 200P1 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED |
| PREN 3728 : 200P1 | AEROSPACE SERIES - SHAFT-NUTS, SELF-LOCKING, LEFT-HAND THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| NF EN 4623 : 2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED |
| UNI EN 4619 : 2011 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - INSTALLATION AND REMOVAL PROCEDURE |
| NFL 22-458 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, NORMAL HEIGHT, LEFT-HAND ISO M OR ISO MJ THREADS, 4H TOLERANCE CLASS |
| I.S. EN 3636:2008 | AEROSPACE SERIES - SCREWS, REDUCED PAN HEAD, OFFSET CRUCIFORM RECESS, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FEPA92HT (A286), SILVER PLATED - CLASSIFICATION: 900 MPA/650 DEGREE C |
| I.S. EN 3034:2009 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER - IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER COATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| BS EN 3301:2007 | Aerospace series. Bolts, T-head, close tolerance medium thread length in heat resisting steel FE-PM1708 (FV535), uncoated. Classification: 1000 MPa/550°C |
| I.S. EN 3831:2005 | AEROSPACE SERIES - INSERTS, THICKWALL, SELF-LOCKING, MJ THREADS, IN HEAT RESISTING STEEL FE-PM3801 (17-4PH), MOS[2] COATED |
| DIN HDBK 45 E : 1ED 2009 | THREADS FOR ENGINEERING - BASIC STANDARDS |
| I.S. EN 4014:2005 | AEROSPACE SERIES - INSERTS, THICKWALL, SELF-LOCKING - DESIGN STANDARD |
| SAEITC TS172-4 | TS172 Performance Specification for Nut, Union, Metric, Threaded, Self- Locking A286 Dry Film Lubricated |
| ASME B1.21M : 1997 : R2008 | METRIC SCREW THREADS - MJ PROFILE |
| BS 6293-2:1994 | Aerospace. MJ threads Limit dimensions for bolts and nuts |
| ASME B1.21M : 1997 | METRIC SCREW THREADS - MJ PROFILE |
| SAEITC TS66-6 | TS66 Draughting and Part Numbering Procedures for Drawings |
| ASME B1.21M : 1997 : R2013 | METRIC SCREW THREADS - MJ PROFILE |
| EN 4691-1:2017 | Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification |
| BS EN 3034:2009 | Aerospace series. Nuts, self-locking, hexagonal with captive washer. In heat resisting steel FE-PA92HT (A286), silver coated. Classification: 1100 MPa/425 °C |
| BS EN 4622:2010 | Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated |
| BS 6293-3:1994 | Aerospace. MJ threads Limit dimensions for fittings for fluid systems |
| BS EN 3706:2012 | Aerospace series. Headless threaded plugs, cross recess, in aluminium alloy 5086 |
| BS EN 4621:2010 | Aerospace series. Inserts, MJ threads, self-locking, self-broaching keys. Technical specification |
| I.S. EN 3328:2008 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING STEEL FE-PM38 (FV535), UNCOATED - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| NFL 22-569 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, 90 DEGREES CORNER, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NFL 22-570 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, 60 DEGREE CORNER, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREE C |
| 05/30141093 DC : 0 | EN 4620 - AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - DESIGN STANDARD |
| NFL 22-589 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, 90 DEGREE CORNER, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN CORROSION RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREE C |
| BS EN 4624:2010 | Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plate |
| NFL 22-595 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN CORROSION RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREE C |
| BS EN 3707:2012 | Aerospace series. Headless threaded plugs. Installation holes |
| BS EN 3637:2008 | Aerospace series. Nuts, self-locking, bihexagonal (double reduced), in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, Classification: 1210 MPa/730 °C |
| BS EN 3686:2008 | Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1100 MPa/650°C |
| BS A 358-3:2000 | MJ threads Limit dimensions for fittings for fluid systems |
| I.S. EN 3613:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1275 MPA/650 DEGREE C |
| BS 2M 59:1993 | Specification for interface of metric couplings, 24° cone, for aerospace fluid systems |
| NFL 22-590 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTSD, ANCHOR, SELF-LOCKING, 60 DEGREE CORNER, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN CORROSION RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREE C |
| BIS IS 10980-3 : 2014 | AEROSPACE - MJ THREADS - PART 3: LIMIT DIMENSIONS FOR FITTINGS FOR FLUID SYSTEMS |
| BS EN 2606:2009 | Aerospace series. 60° interface for adaptors, threaded, with lockring. Geometric configuration |
| BS EN 4399:2008 | Aerospace series. Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated |
| SAE AIR 2000 : 2000 | AEROSPACE FLUID SYSTEM STANDARDS, METRIC, NATIONAL AND INTERNATIONAL |
| UNI EN 4621 : 2011 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, SELF-BROACHING KEYS - TECHNICAL SPECIFICATION |
| NFL 22-444 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, WITH LOCKING HOLES, LEFT-HAND ISO M OR ISO MJ THREADS, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| PREN 4014 : 200P1 | AEROSPACE SERIES - INSERTS, THICKWALL, SELF-LOCKING - DESIGN STANDARD |
| PREN 2606 : DRAFT 2008 | AEROSPACE SERIES - 60 DEGREES INTERFACE FOR ADAPTORS, THREADED, WITH LOCKRING - GEOMETRIC CONFIGURATION |
| XP PREN 2945 : 1992 XP | AEROSPACE SERIES - ASSEMBLY WITH SELF-LOCKING THREAD INSERTS |
| PREN 3240 : 200P2 | AEROSPACE SERIES - NUTS, SELF-LOCKING, CLIP, IN HEAT RESISTING STEEL FE-PA92HT (A286), UNCOATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 3706 : 200P1 | AEROSPACE SERIES - HEADLESS THREADED PLUGS CROSS RECESS, IN ALUMINIUM ALLOY 5086 |
| PREN 3687 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL, FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| ISO 5855-2:1999 | Aerospace MJ threads Part 2: Limit dimensions for bolts and nuts |
| ISO 3353-2:2002 | Aerospace Lead and runout threads Part 2: Internal threads |
| SAE MA 614 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), METALLIC REINFORCED, 28,000 KPA, 204 DEGREES C, HYDRAULIC, METRIC |
| NF EN 3241 : 2008 | AEROSPACE SERIES - NUTS, SELF-LOCKING, CLIP, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| UNI EN 2852 : 2011 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, HEAT RESISTING STEEL PASSIVATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| I.S. EN 3686:2008 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| DIN EN 2601:1996-10 | AEROSPACE SERIES - FORK ENDS, ADJUSTABLE - TECHNICAL SPECIFICATION |
| DIN EN 2289:1996-10 | AEROSPACE SERIES - ROD BODIES IN ALUMINIUM ALLOY FOR FLIGHT CONTROLS - TECHNICAL SPECIFICATION |
| BS EN 2603:2005 | Aerospace series. Port ends for adaptors, threaded, with lockring. Geometric configuration |
| EN 2752:1989 | Aerospace series - Nuts, anchor, self locking fixed, two lug, reduced series, with counterbore - Classification : 1100 MPa/235 degree C |
| EN 2602:2005 | Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration |
| BS EN 3241:2008 | Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-P A 92 HT (A 286), silver coated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| BS EN 3729:2008 | Aerospace series. Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated |
| 16/30346081 DC : 0 | BS EN 4510 - AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREE, SPHERICAL IN TITANIUM ALLOY TIP64001 - ADAPTERS, STRAIGHT, DOUBLE END, WITH LOCKING RING |
| BS A 358-2:2000 | MJ threads Limit dimensions for bolts and nuts |
| NFL 22-519 : A | AIRCRAFT BOLTS AND NUTS - BIHEXAGONAL NUTS, SELF-LOCKING, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREE C |
| BS EN 3294:2008 | Aerospace series. Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts. Classification: 1210 MPa/730°C |
| 05/30141100 DC : 0 | EN 4622 - AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] |
| NF EN 2606 : 2010 | AEROSPACE SERIES - 60 DEGREES INTERFACE FOR ADAPTORS, THREADED, WITH LOCKRING - GEOMETRIC CONFIGURATION |
| ISO 13417:1997 | Aerospace — Airframe needle track roller, stud type, single-row, sealed — Metric series |
| NFL 22-453 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, SLOTTED/CASELLATED, REDUCED HEIGHT, ISO M OR ISO MJ THREADS, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| BS EN 3613:2009 | Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NIPH2601 (Inconel 718), silver plated. Classification: 1275 MPa/650 °C |
| NF EN 3034 : 2009 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER COATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| BS EN 3728:2008 | Aerospace series. Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated |
| NFL 22-431 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, ISO M OR ISO MJ THREADS, 2, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| XP PREN 2933 : 1993 XP | AEROSPACE SERIES - BOLTS T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCO 718) UNPLATED - CLASSIFICATION: 1275 MPA/650 DEGREE C |
| XP PREN 2936 : 1993 XP | AEROSPACE SERIES - BOLTS T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) SILVER PLATED - CLASSIFICATION: 1210 MPA/730 DEGREE C |
| UNI EN 4620 : 2011 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - DESIGN STANDARD |
| NFL 22-541 : C2001 | AIRCRAFT BOLTS AND NUTS - HEXAGONAL NUTS, SELF-LOCKING, ISO M AND ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURES)/235 DEGREES C OR IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| XP PREN 2934 : 1993 XP | AEROSPACE SERIES - BOLTS T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCO 718) SILVER PLATED - CLASSIFICATION: 1275 MPA/650 DEGREE C |
| PREN 2605 : DRAFT 87 | AEROSPACE SERIES - STRAIGHT METRIC-SIZE UNIONS WITH LOCKING RING - 24 DEGREES UNION INTERFACE - DIMENSIONS |
| BS EN 3323:2009 | Aerospace series. Bolts with double hexagon head, relieved shank, long thread, in heat resisting steel FE-PM 38 (FV 535). Classification: 1000 MPa/550 °C |
| BS EN 3328:2008 | Aerospace series. Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting steel FE-PM38 (FV535), uncoated. Classification: 1000 MPa/550 °C |
| BS EN 3293:2008 | Aerospace series. Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated. Classification: 1275 MPa/650°C |
| NFL 22-596 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SINGLE LUG, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN CORROSION RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREE C |
| NF EN 3328 : 2008 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING STEEL FE-PM38 (FV535), UNCOATED - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| NFL 22-442 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, LEFT-HAND ISO M OR ISO MJ THREADS, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| SAE MA 1339 : 2015 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 21,000 KPA, 204 DEGREE C, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC, METRIC |
| PREN 3293 : 200P1 | AEROSPACE SERIES - BOLT, T-HEAD, CLOSE TOLERANCE MEDIUM THREAD LENGTH IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), UNCOATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| PREN 4620 : 200P1 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - DESIGN STANDARD |
| BS 2A241(2005) : 2005 | GENERAL REQUIREMENTS FOR STEEL PROTRUDING-HEAD BOLTS OF TENSILE STRENGTH 1250 MPA (180000 LBF/IN[2]) OR GREATER - SPECIFICATION |
| NF EN 3033 : 2008 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER, IN HEAT RESISTING STEEL FE-PA2601 (A286), UNCOATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| I.S. EN 3728:2008 | AEROSPACE SERIES - SHAFT-NUTS, SELF-LOCKING, LEFT-HAND THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| I.S. EN 3637:2008 | AEROSPACE SERIES - NUTS, SELF-LOCKING, BI-HEXAGONAL (DOUBLE REDUCED), IN HEAT RESISTING NICKEL BASE ALLOY - NI-P101HT (WASPALOY), SILVER PLATED, CLASSIFICATION: 1210 MPA/730 DEGREE C |
| I.S. EN 3706:2012 | AEROSPACE SERIES - HEADLESS THREADED PLUGS, CROSS RECESS, IN ALUMINIUM ALLOY 5086 |
| I.S. EN 3729:2008 | AEROSPACE SERIES - RINGS, THREADED, SELF-LOCKING, LEFT-HAND THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| ISO 10959:2016 | Aerospace MJ threads Gauging |
| ISO 5855-3:1999 | Aerospace MJ threads Part 3: Limit dimensions for fittings for fluid systems |
| I.S. EN 3033:2008 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER, IN HEAT RESISTING STEEL FE-PA2601 (A286), UNCOATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| I.S. EN 3323:2009 | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK LONG THREAD, - IN HEAT RESISTING STEEL FE-PM 38 (FV 535) - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| I.S. EN 3293:2008 | AEROSPACE SERIES - BOLTS, T-HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), UNCOATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| I.S. EN 3327:2008 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), UNCOATED - CLASSIFICATION: 1275 MPA/650 DEGREE C |
| DIN EN 3676:1998-02 | AEROSPACE SERIES - INSERTS, THIN WALL, SELF-LOCKING - DESIGN STANDARD |
| BS EN 3240:2007 | Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated. Classification: 1100 MPa (at ambient temperature)/425°C |
| 11/30242263 DC : 0 | BS EN 4691-001 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - TECHNICAL SPECIFICATION |
| BS EN 4014:2004 | Aerospace series. Inserts, thickwall, self-locking. Design standard |
| BS EN 2604:2005 | Aerospace series. 8° 30\' interface for adaptors, threaded, with lockring. Geometric configuration |
| BS EN 3676:1998 | Inserts, thin wall, self-locking. Design standard |
| BS EN 2752:1990 | Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore. Classification: 1100 MPa/235°C |
| BS EN 2602:2005 | Aerospace series. Ports for adaptors, threaded, with lockring. Geometric configuration |
| BS EN 2605:2005 | Aerospace series. 24° interface for adaptors, threaded, with lockring. Geometric configuration |
| BS EN 3831:2004 | Aerospace series. Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH), MoS<sub>2</sub> coated |
| BS EN 4691-1:2017 | Aerospace series. Tie rod with integrated bolts Technical specification |
| EN 3831:2004 | Aerospace series - Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH), MoS2 coated |
| EN 4621:2010 | Aerospace series - Inserts, MJ threads, self-locking, self-broaching keys - Technical specification |
| EN 3728:2008 | Aerospace series - Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated |
| EN 3328:2008 | Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting steel FE-PM38 (FV535), uncoated - Classification: 1 000 MPa/550 °C |
| EN 2498:1990 | Aerospace series - Rod ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank - Dimensions and loads |
| EN 2754:2006 | Aerospace series - Nuts, anchor, self locking, two lug, floating with counterbore - Classification: 1 100 MPa/235 °C |
| EN 2587:1990 | Aerospace series - Rod ends adjustable double fork and threaded shank - Dimensions and loads |
| EN 3241:2008 | Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA 92 HT (A 286), silver coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 4620:2010 | Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys - Design standard |
| EN 3637:2008 | Aerospace series - Nuts, self-locking, bi-hexagonal (double reduced), in heat resisting nickel base alloy - NI-P101HT (Waspaloy), silver plated, Classification: 1210 MPa/730 °C |
| EN 4399:2008 | Aerospace series - Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated |
| EN 3729:2008 | Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated |
| EN 3636:2008 | Aerospace series - Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa/650 °C |
| EN 3323:2009 | Aerospace series - Bolts with double hexagon head, relieved shank. long thread, - In heat resisting steel FE-PM 38 (FV 535) - Classification: 1 000 MPa/550 °C |
| EN 4396:2008 | Aerospace series - Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated |
| EN 2604:2005 | Aerospace series - 8° 30' interface for adaptors, threaded, with lockring - Geometric configuration |
| EN 2603:2005 | Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration |
| EN 3294:2008 | Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts -Classification: 1 210 MPa/730 °C |
| EN 3033:2008 | Aerospace series - Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601 (A286), uncoated - Classification : 1 100 MPa/425 °C |
| EN 4623:2010 | Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated |
| EN 3240:2007 | Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 3706:2012 | Aerospace series - Headless threaded plugs, cross recess, in aluminium alloy 5086 |
| EN 3327:2008 | Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1 275 MPa/650 °C |
| EN 4624:2010 | Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plate |
| EN 2569:1991 | Aerospace series - Control cable fittings and turnbarrels - Technical specification |
| EN 2289:1996 | Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification |
| EN 2608:2005 | Aerospace series - Installation and removal requirements for 8° 30' adaptors, threaded, with lockring |
| EN 2515:1990 | Aerospace series - Rod ends, adjustable single fork and threaded shank - Dimensions and loads |
| EN 3707:2012 | Aerospace series - Headless threaded plugs - Installation holes |
| EN 2605:2005 | Aerospace series - 24° interface for adaptors, threaded, with lockring - Geometric configuration |
| EN 3676:1998 | Aerospace series - Inserts, thin wall, self-locking - Design standard |
| EN 3613:2009 | Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 275 MPa/650 °C |
| EN 3293:2008 | Aerospace series - Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1 275 MPa/650 °C |
| EN 4619:2010 | Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys - Installation and removal procedure |
| EN 2811:2016 | Aerospace series - Nuts, hexagon, slotted/ castellated in steel cadmium plated - Classification: 1 100 MPa/235 °C |
| EN 2852:2010 | Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated - Classification: 1 100 MPa/650 °C |
| EN 4622:2010 | Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated |
| EN 4014:2004 | Aerospace series - Inserts, thickwall, self-locking - Design standard |
| EN 2606:2009 | Aerospace series - 60° interface for adaptors, threaded, with lockring - Geometric configuration |
| EN 2601:1996 | Aerospace series - Fork ends, adjustable - Technical specification |
| EN 3326:2007 | Aerospace series - Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718) - Classification: 1 275 MPa/650 °C, unplated |
| EN 3301:2007 | Aerospace series - Bolts, T-head, close tolerance medium thread length in heat resisting steel FE-PM1708 (FV535), uncoated - Classification: 1 000 MPa/550 °C |
| BS A 295:1985 | Methods of test for self-locking nuts with maximum operating temperature less than or equal to 425°C |
| BS EN 2852:2010 | Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated. Classification: 1100 MPa/650°C |
| 05/30141105 DC : 0 | EN 4624 - AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATING |
| BS EN 4623:2010 | Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated |
| NF EN 3323 : 2009 | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK LONG THREAD, IN HEAT RESISTING STEEL FE-PM38 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| BS EN 3327:2008 | Aerospace series. Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated. Classification: 1275 MPa/650 °C |
| BS EN 4619:2010 | Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys. Installation and removal procedure |
| BS EN 3687:2010 | Aerospace series. Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated.Classifi cation: 1100 MPa/650 °C |
| BS EN 4620:2010 | Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys. Design standard |
| NFL 22-462 : A | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, WITH LOCKING HOLES, LEFT-HAND ISO M OR ISO MJ THREADS, FINE PITCH THREADS, 4H5H TOLERANCE CLASS |
| NF EN 3327 : 2008 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), UNCOATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| NFL 22-568 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, SINGLE LUG, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| XP PREN 3542 : 1992 XP | AEROSPACE SERIES - INSERT, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN HEAT RESISTING ALLOY, NICKEL BASE ALLOY (INCO X750 - EN 3018), UNPLATED |
| DIN 202:1999-11 | SCREW THREADS - GENERAL PLAN |
| NFL 22-567 : 2001 | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, TWO LUG, WITH COUNTERBORE, ISO M THREADS IN STEEL, CADMIUM PLATED MOS2 LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NFL 22-432 : 2000 | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, LEFT-HAND ISO M OR ISO MJ THREADS, 2, 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER |
| PREN 3707 : 200P1 | AEROSPACE SERIES - HEADLESS THREADED PLUGS - INSTALLATION HOLES |
| NFL 22-461 : C | AIRCRAFT BOLTS AND NUTS - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, WITH LOCKING HOLES, ISO M OR ISO MJ THREADS, FINE PITCH THREADS, 4H5H TOLERANCE CLASS |
| UNI EN 3687 : 2011 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| NFL 22-575 : A | AIRCRAFT BOLTS AND NUTS - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, WITH COUNTERBORE, ISO M OR ISO MJ THREADS, IN STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREE C |
| PREN 2852 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, HEAT RESISTING STEEL PASSIVATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| PREN 2608 : 200P1 | AEROSPACE SERIES - INSTALLATION AND REMOVAL REQUIREMENTS FOR 8 DEGREES 30 MINUTES ADAPTORS, THREADED WITH LOCKRING |
| PREN 4623 : 200P1 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED |
| PREN 4396 : 200P1 | AEROSPACE SERIES - SHAFT-NUTS, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| PREN 3637 : 200P1 | AEROSPACE SERIES - NUTS, SELF-LOCKING, BI-HEXAGONAL (DOUBLE REDUCED), IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED - CLASSIFICATION: 1210 MPA/730 DEGREES C |
| PREN 4621 : 200P1 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - TECHNICAL SPECIFICATION |
| NF EN 3686 : 2009 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| I.S. EN 4622:2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED |
| NFL 22-433 : 2000 | BOULONNERIE AERONAUTIQUE - ECROUS HEXAGONAUX ORDINAIRES, HAUTEUR NORMALE, SURPLATS NORMAUX, A FILETAGE ISO M OU ISO MJ, CLASSE DE TOLERANCE 4H |
| I.S. EN 4691-1:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| I.S. EN 3241:2008 | AEROSPACE SERIES - NUTS, SELF-LOCKING, CLIP, IN HEAT RESISTING STEEL FE-PA 92 HT (A 286), SILVER COATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| I.S. EN 3687:2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| NF EN 4624 : 2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY), SILVER PLATED |
| NF EN 4622 : 2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED |
| I.S. EN 2811:2016 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED IN STEEL CADMIUM PLATED - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| I.S. EN 4396:2008 | AEROSPACE SERIES - SHAFT-NUTS, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| I.S. EN 4623:2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.