ISO 5832-9:2007
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Implants for surgery Metallic materials Part 9: Wrought high nitrogen stainless steel
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
16-07-2021
Superseded by
Language(s)
English, French, Russian
Published date
12-06-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 5832-9:2007 specifies the characteristics of, and corresponding test methods for, wrought stainless steel containing a mass fraction of 0,25 % to 0,50 % nitrogen for use in the manufacture of surgical implants for which high levels of strength and corrosion resistance are required.
| DevelopmentNote |
DRAFT ISO/DIS 5832-9 is also available for this standard. (10/2017)
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF ISO 5832-9 : 2007 | Identical |
| BS ISO 5832-9:2007 | Identical |
| GOST R ISO 5832-9 : 2009 | Identical |
| BIS IS/ISO 5832-9 : 2007 | Identical |
| NFS 94 059 : 1997 | Similar to |
| DIN ISO 5832-9:2008-12 | Identical |
| ASTM F 2068 : 2015 : REDLINE | Standard Specification for Femoral Prostheses—Metallic Implants |
| ASTM F 2181 : 2014 : REDLINE | Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
| ISO 15374:1998 | Implants for surgery — Requirements for production of forgings |
| UNE-EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| BS ISO 5838-1:2013 | Implants for surgery. Metallic skeletal pins and wires General requirements |
| BS ISO 15374:1998 | Implants for surgery. Requirements for production of forgings |
| BS ISO 12891-2:2014 | Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
| ISO 5838-1:2013 | Implants for surgery Metallic skeletal pins and wires Part 1: General requirements |
| DIN EN ISO 16061:2015-09 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| BS EN 12010:1998 | Non-active surgical implants. Joint replacement implants. Particular requirements |
| 11/30197571 DC : 0 | BS ISO 25832-1 - IMPLANTS FOR SURGERY - SEAMLESS TUBES FOR SURGICAL IMPLANTS - PART 1: MATERIALS BASED ON IRON |
| ISO 10334:1994 | Implants for surgery — Malleable wires for use as sutures and other surgical applications |
| 13/30242622 DC : 0 | BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
| BS EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants. General requirements |
| ISO 12891-2:2014 | Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
| I.S. EN ISO 16061:2015 | INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 16061:2015) |
| ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants General requirements |
| 11/30242625 DC : 0 | BS ISO 5838-1 - IMPLANTS FOR SURGERY - METALLIC SKELETAL PINS AND WIRES - PART 1: GENERAL REQUIREMENTS |
| NFS 94 090 : 2005 | MEDICO-SURGICAL EQUIPMENT - MATERIALS FOR ANCILLARY POSITIONING INSTRUMENTS FOR BONE SURGERY - MARTENSITIC, PRECIPITATION HARDENING, AUSTENITIC AND AUSTENO-FERRITIC STAINLESS STEELS |
| ASTM F 621 : 2012 : R2017 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| ASTM F 621 : 2012 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
| EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO 671:1982 | Steel and cast iron Determination of sulphur content Combustion titrimetric method |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ISO 629:1982 | Steel and cast iron — Determination of manganese content — Spectrophotometric method |
| ISO 439:1994 | Steel and iron Determination of total silicon content Gravimetric method |
| ISO 437:1982 | Steel and cast iron Determination of total carbon content Combustion gravimetric method |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| ISO 10714:1992 | Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.