ISO 5658-2:2006
Current
Current
The latest, up-to-date edition.
Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
18-09-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 5658-2:2006 specifies a method of test for measuring the lateral spread of flame along the surface of a specimen of a product orientated in the vertical position. ISO 5658-2:2006 provides data suitable for comparing the performance of essentially flat materials, composites or assemblies that are used primarily as the exposed surfaces of walls in buildings and transport vehicles, such as ships and trains. Some profiled products (such as pipes) can also be tested under specified mounting and fixing conditions.
ISO 5658-2:2006 is applicable to the measurement and description of the properties of materials, products or assemblies in response to radiative heat in the presence of a pilot flame under controlled laboratory conditions.
ISO 5658-2:2006 is not suitable to be used alone to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions.
| DevelopmentNote |
Supersedes ISO/DIS 5658-2 (09/2006)
|
| DocumentType |
Standard
|
| Pages |
35
|
| ProductNote |
THIS STANDARD ALSO REFERS TO IMO Resolution A.653 (16),IMO Resolution A.753 (18)
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF ISO 5658-2 : 2007 | Identical |
| BS ISO 5658-2 : 2006 | Identical |
| CEI UNI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
| DD ISO/TS 14934-4:2007 | Fire tests. Calibration of heat flux meters Guidance on the use of heat flux meters in fire tests |
| NF EN 45545-2 : 2013 + A1 2016 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOR OF MATERIALS AND COMPONENTS |
| ISO/TS 3814:2014 | Standard tests for measuring reaction-to-fire of products and materials — Their development and application |
| BS EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| UNI EN ISO 25762 : 2012 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES |
| ISO/TS 5658-1:2006 | Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread |
| XP CEN/TS 45545-2 : 2009 XP | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| EN 60695-9-2:2014 | Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods |
| 06/30116005 DC : DRAFT MAY 2006 | ISO/TR 14697 - REACTION TO FIRE TESTS - GUIDANCE ON THE CHOICE OF SUBSTRATES FOR BUILDING AND TRANSPORT PRODUCTS |
| 04/19990095 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| DIN EN ISO 25762:2012-04 | Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009) |
| BS ISO 10840:2008 | Plastics. Guidance for the use of standard fire tests |
| BS ISO TR 11925-1:1999 | Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Guidance on ignitability |
| IEC 60695-1-12:2015 | Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering |
| I.S. EN 45545-2:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| S.R. CEN/TS 45545-2:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| ISO/TS 14934-4:2007 | Fire tests Calibration of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests |
| I.S. EN 60695-9-2:2014 | FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS |
| BS EN ISO 15791-1:2013 | Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance |
| EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| I.S. EN ISO 15791-1:2013 | PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014) |
| BS ISO/TR 14697:1997 | Fire tests. Guidance on the choice of substrates for building products |
| UNI CEI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
| 10/30216687 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| BS ISO TR 5658-1:1997 | Reaction to fire tests. Spread of flame Guidance on flame spread |
| BS ISO 25762 : 2009 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES |
| BS ISO/TR 11696-2:1999 | Uses of reaction to fire test results Fire hazard assessment of construction products |
| BS ISO/TR 11696-1:1999 | Uses of reaction to fire test results Application of test results to predict fire performance of internal linings and other building products |
| BS ISO 14934-4:2014 | Fire tests. Calibration and use of heat flux meters Guidance on the use of heat flux meters in fire tests |
| ISO 14697:2007 | Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products |
| BS ISO 5658-2 : 2006 | REACTION TO FIRE TESTS - SPREAD OF FLAME - PART 2: LATERAL SPREAD ON BUILDING AND TRANSPORT PRODUCTS IN VERTICAL CONFIGURATION |
| ISO 14934-4:2014 | Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests |
| UNE-EN 60695-9-2:2014 | Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods |
| IEC TS 60695-9-2:2005 | Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods |
| IEC 60695-9-2:2014 | Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods |
| EN ISO 15791-1:2013 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| UNI EN ISO 15791-1 : 2014 | PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE |
| BS EN ISO 25762:2012 | Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites |
| BS ISO 5658-4:2001 | Reaction to fire tests. Spread of flame Intermediate-scale test of vertical spread of flame with vertically oriented specimen |
| 08/30192184 DC : 0 | ISO 15928-4 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 4: FIRE SAFETY |
| UNI CEI CEN/TS 45545-2 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| DIN EN 45545-2:2016-02 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| DD ISO/TS 5658-1:2006 | Reaction to fire tests. Spread of flame Guidance on flame spread |
| ISO/TR 11925-1:1999 | Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability |
| DD CEN/TS 45545-2:2009 | Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components |
| AFAP-1 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - POLICY FOR THE PRE-SELECTION OF MATERIALS FOR MILITARY APPLICATIONS |
| I.S. EN ISO 25762:2012 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009) |
| ISO 10840:2008 | Plastics — Guidance for the use of standard fire tests |
| ISO/TR 17252:2008 | Fire tests Applicability of reaction to fire tests to fire modelling and fire safety engineering |
| AFAP-4 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - SURFACE SPREAD OF FLAME |
| ISO/TS 15791-2:2017 | Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products |
| ISO 14934-3:2012 | Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method |
| ISO/TR 10840:1993 | Plastics Burning behaviour Guidance for development and use of fire tests |
| ISO/TS 14934-1:2002 | Fire tests Calibration and use of radiometers and heat flux meters Part 1: General principles |
| DD IEC TS 60695-9-2 : DRAFT 2005 | FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS |
| BS EN 60695-9-2:2014 | Fire hazard testing Surface spread of flame. Summary and relevance of test methods |
| UNE-EN ISO 15791-1:2014 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| ISO 15791-1:2014 | Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance |
| ISO 25762:2009 | Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites |
| EN ISO 25762:2012 | Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009) |
| 13/30292037 DC : 0 | BS ISO 14934-4 - FIRE TESTS - CALIBRATION OF HEAT FLUX METERS - PART 4: GUIDANCE ON THE USE OF HEAT FLUX METERS IN FIRE TESTS |
| 08/30154274 DC : DRAFT MAR 2008 | BS ISO 25762 - PLASTICS - GUIDANCE ON THE ASSESSMENT OF FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED COMPOSITES |
| PD ISO/TS 3814:2014 | Standard tests for measuring reaction-to-fire of products and materials. Their development and application |
| BS ISO 14697:2007 | Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products |
| UNE-EN 45545-2:2013 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components |
| ISO 15928-4:2017 | Houses — Description of performance — Part 4: Fire safety |
| ISO/TR 11696-2:1999 | Uses of reaction to fire test results Part 2: Fire hazard assessment of construction products |
| DIN EN ISO 15791-1:2014-05 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| CEN/TS 45545-2:2009 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| ISO 9705:1993 | Fire tests Full-scale room test for surface products |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| ISO/TS 14934-1:2002 | Fire tests Calibration and use of radiometers and heat flux meters Part 1: General principles |
| ISO 13943:2017 | Fire safety — Vocabulary |
| ISO/TR 3814:1989 | Tests for measuring "reaction-to-fire" of building materials — Their development and application |
| BS 6809:1987 | Method for calibration of radiometers for use in fire testing |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 14934-2:2013 | Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods |
| ISO 14934-3:2012 | Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method |
| ISO/TR 5658-1:1997 | Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.