ISO 565:1990
Current
Current
The latest, up-to-date edition.
Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
12-07-1990
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Applies to metal wire cloth with square openings and perforated plates or sheets with square or circular openings. Tables include principal sizes and supplementary sizes. Sizes of 1 mm and above shall be expressed in millimetres and sizes below 1 mm in micrometres.
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 12373-10 : 1999 | Identical |
| UNE 7050-2:1997 | Identical |
| NBN EN 27941 : 1994 | Identical |
| NF ISO 565 : 1990 | Identical |
| NBN S 02 001 : 1985 | Identical |
| UNE 64037:1972 | Identical |
| DIN 4188-1:1977-10 | Similar to |
| UNI 2331-2 : 1980 | Similar to |
| NFX 11 501 : 1970 | Similar to |
| PN ISO 565 : 2000 | Identical |
| DIN ISO 565:1998-12 | Identical |
| DIN 17599:1985-06 | Identical |
| NBN EN 1235 : 95 AMD 1 2003 | Identical |
| BS 410:1986 | Similar to |
| ISO 9276-1:1998 | Representation of results of particle size analysis — Part 1: Graphical representation |
| NF EN 4638 : 2010 | AEROSPACE SERIES - BLAST MEDIA - BROWN CORUNDUM, WITHOUT IRON |
| ISO 8942:2010 | Rubber compounding ingredients Carbon black Determination of individual pellet crushing strength |
| DD CEN/TS 15415:2006 | Solid recovered fuels. Determination of particle size and particle size distribution by screen method |
| 02/122342 DC : DRAFT MAY 2002 | PREN 993-20 - METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 20: DETERMINATION OF RESISTANCE TO ABRASION AT AMBIENT TEMPERATURES |
| 14/30309764 DC : 0 | BS EN ISO 20567-1 - PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING |
| 10/30228056 DC : 0 | |
| PD CEN/TS 16011:2013 | Plastics. Recycled plastics. Sample preparation |
| BS EN ISO 1927-3:2012 | Monolithic (unshaped) refractory products Characterization as received |
| I.S. EN 725-8:2006 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 8: DETERMINATION OF TAPPED BULK DENSITY |
| 13/30276237 DC : 0 | BS EN 15348 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES |
| 01/124327 DC : DRAFT DEC 2001 | ISO 13765-5 - REFRACTORY MORTARS - PART 5: DETERMINATION OF GRAIN SIZE DISTRIBUTION (SIEVE ANALYSIS) |
| ISO 11125-2:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 2: Determination of particle size distribution |
| PREN 13279-2 : DRAFT 2013 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 2: TEST METHODS |
| 05/30128036 DC : DRAFT JAN 2005 | IEC 60079-5 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 5: POWDER FILLING 'Q' |
| DIN 69101-2:1985-12 | GRAINS OF FUSED ALUMINIUM OXIDE AND SILICON CARBIDE FOR BONDED ABRASIVE PRODUCTS AND CHIP REMOVAL OPERATIONS WITH LOOSE ABRASIVE GRAINS; METHOD OF TEST OF MACROGRITS F4 TO F220 |
| NF EN ISO 23145-2 : 2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 2: UNTAPPED DENSITY |
| BS 3309:1978 | Specification for photographic grade benzotriazole |
| BS EN ISO 16282:2008 | Methods of test for dense shaped refractory products. Determination of resistance to abrasion at ambient temperature |
| DIN EN ISO 5529:2010-08 | Wheat - Determination of the sedimentation index - Zeleny test (ISO 5529:2007); German version EN ISO 5529:2010 |
| 15/30323498 DC : 0 | BS EN 451-2 - METHOD OF TESTING FLY ASH - PART 2: DETERMINATION OF FINENESS BY WET SIEVING |
| DIN 4226-1:2001-07 | AGGREGATES FOR CONCRETE AND MORTAR - PART 1: NORMAL AND HEAVY-WEIGHT AGGREGATES |
| UNI ISO 8511 : 2012 | RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF PELLET SIZE DISTRIBUTION |
| S.R. 21:2014 | GUIDANCE ON THE USE OF I.S. EN 13242:2002 +A1:2007 AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
| NF EN 4637 : 2010 | AEROSPACE SERIES - BLAST MEDIA - WHITE CORUNDUM |
| BS ISO 1437:2017 | Rubber compounding ingredients. Carbon black. Determination of sieve residue |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| BS 7825-3.1:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Thermal properties |
| UNI 11451 : 2012 | COMPOSTABLE AND BIODEGRADABLES BAGS FOR URBAN SOLID WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 1927-3 : 2013 | MONOLITHIC (UNSHAPED) REFRACTORY PRODUCTS - PART 3: CHARACTERIZATION AS RECEIVED |
| 16/30335323 DC : 0 | BS ISO 1437 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF SIEVE RESIDUE |
| ISO 21869:2006 | Rubber compounding ingredients Magnesium oxide Methods of test |
| BS ISO 4020:2001 | Road vehicles. Fuel filters for diesel engines.Test methods |
| BS ISO 8486-1:1996 | Bond abrasives. Determination and designation of grain size distribution Macrogrits F4 to F220 |
| 13/30255132 DC : 0 | BS ISO 16742 - IRON ORES - SAMPLING OF SLURRIES |
| ONORM EN 196-6 : 2010 | METHODS OF TESTING CEMENT - PART 6: DETERMINATION OF FINENESS |
| BS ISO 11464:2006 | Soil quality. Pretreatment of samples for physio-chemical analysis |
| BS 7755-5.4:1998 | Soil quality. Physical methods Method by sieving and sedimentation |
| PREN 13963 : DRAFT 2011 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS ISO 23145-2 : 2012 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 2: UNTAPPED DENSITY |
| 08/30184575 DC : DRAFT JUNE 2008 | BS EN ISO 787-7 - GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 7: DETERMINATION OF RESIDUE ON SIEVE - WATER METHOD - MANUAL PROCEDURE |
| BS EN ISO 5529:2010 | Wheat. Determination of the sedimentation index. Zeleny test |
| 10/30086524 DC : 0 | BS ISO 10844 - ACOUSTICS - SPECIFICATION OF TEST TRACKS FOR THE PURPOSE OF MEASURING NOISE EMITTED BY ROAD VEHICLES |
| BS 7079-F12(1994) : 1994 AMD 9847 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| DIN EN ISO 787-7:2010-02 | General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009) |
| 04/300130 DC : 0 | ISO 17792 - MILK AND MILK PRODUCTS - MESOPHILIC STARTER CULTURES - ENUMERATION OF CITRATE-FERMENTING LACTIC ACID BACTERIA USING A COLONY-COUNT TECHNIQUE AT 25 DEGREES C |
| 95/102636 DC : DRAFT APRIL 1995 | PREN 1771 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF INJECTABILITY AND SPLITTING TEST |
| BS 6356-15:1997 | Spraying equipment for crop protection Typical layout |
| 14/30284090 DC : 0 | BS ISO 13909-1 - HARD COAL AND COKE - MECHANICAL SAMPLING - PART 1: GENERAL INTRODUCTION |
| CEI EN 50281-2-1 : 1999 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 2-1: TEST METHODS - METHODS FOR DETERMINING THE MINIMUM IGNITION TEMPERATURES OF DUST |
| BS ISO 17792:2006 | Milk, milk products and mesophilic starter cultures. Enumeration of citrate-fermenting lactic acid bacteria. Colony-count technique at 25°C |
| BS ISO 3082:2017 | Iron ores. Sampling and sample preparation procedures |
| BS 6043-2.9:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture Electrode coke - Determination of particle size distribution |
| DIN ISO 11464 E : 2006 | SOIL QUALITY - PRETREATMENT OF SAMPLES FOR PHYSICO-CHEMICAL ANALYSES |
| BS 2782-1.130D(1993) : 1993 AMD 13567 | METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE THERMAL STABILITY OF POLYVINYL CHLORIDE BY THE POTENTIOMETRIC METHOD |
| S.R. CEN/TS 14972:2011 | FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION |
| 06/30150050 DC : DRAFT MAY 2006 | ISO 20541 - MILK AND MILK PRODUCTS - DETERMINATION OF NITRATE CONTENT - METHOD USING ENZYMATIC REDUCTION AND MOLECULAR ABSORPTION SPECTROMETRY AFTER GRIESS REACTION |
| ISO 5502:1992 | Oilseed residues — Preparation of test samples |
| 04/19987313 DC : DRAFT DEC 2004 | BS ISO 13501 - PETROLEUM & NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION |
| BS ISO 11648-1:2003 | Statistical aspects of sampling from bulk materials General principles |
| BS ISO 12686:1999 | Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish |
| BS 6200-3.28.1:1985 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of sulphur Steel and cast iron: gravimetric method |
| BS ISO 13765-5:2004 | Refractory mortars Determination of grain size distribution (sieve analysis) |
| BS ISO 9073-6 : 2000 AMD 14899 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 6: ABSORPTION |
| BIS IS/ISO 10835 : 2007 | DIRECT REDUCED IRON AND HOT BRIQUETTED IRON - SAMPLING AND SAMPLE PREPARATION |
| BS ISO 3534-2:2006 | Statistics. Vocabulary and symbols Applied statistics |
| 01/103249 DC : DRAFT APR 2001 | BS EN 13108-1 BITUMINUOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
| UNE-EN ISO 14244:2017 | Oilseed meals - Determination of soluble proteins in potassium hydroxide solution (ISO 14244:2014) |
| PREN 12948 : DRAFT 2009 | LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING |
| BS 3103:1978 | Specification for photographic grade hydroquinone (p-dihydroxybenzene) |
| 16/30301962 DC : 0 | BS ISO 3082 - IRON ORES - SAMPLING AND SAMPLE PREPARATION PROCEDURES |
| 04/30110128 DC : 0 | BS EN 14243 - POST-CONSUMER TYRE - MATERIALS AND APPLICATIONS |
| 06/30147329 DC : DRAFT MAR 2006 | ISO 16282 - TEST METHODS FOR DENSE SHAPED REFRACTORY PRODUCTS - DETERMINATION OF RESISTANCE TO ABRASION AT AMBIENT TEMPERATURE |
| UNI 10667-5 : 2012 | Raw-secondary plastic materials - Plasticized polyvinyl chloride intended for different uses, coming from the recycling of industrial residues and / or pre- and / or post-consumer materials - Part 5: Requirements and test methods |
| I.S. EN 13285:2010 | UNBOUND MIXTURES - SPECIFICATIONS |
| PREN 3640 : 200P1 | AEROSPACE SERIES - TEST METHODS - HEAT RESISTING ALLOYS ATOMIZED POWDER - PROCEDURE FOR THE INSPECTION OF LOOSE POWDER CLEANNESS BY WATER ELUTRIATION |
| ISO 10835:2007 | Direct reduced iron and hot briquetted iron Sampling and sample preparation |
| PREN 3225-2 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOYS PRODUCED FROM ATOMIZED POWDER - POWDER COMPACTED FORGING STOCK AND PARTS - TECHNICAL SPECIFICATION - PART 2 - ATOMIZED POWDER |
| ISO 11508:2017 | Soil quality — Determination of particle density |
| PREN 4638 : 200P1 | AEROSPACE SERIES - BLAST MEDIA - BROWN CORUNDUM |
| I.S. EN ISO 14232-1:2017 | THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017) |
| ISO 4284:1993 | Acid-grade and ceramic-grade fluorspar Determination of sulfide content Iodometric method |
| ISO 19595:2017 | Natural aggregates for concrete |
| I.S. EN ISO 5529:2010 | WHEAT - DETERMINATION OF THE SEDIMENTATION INDEX - ZELENY TEST |
| ISO 6639-4:1987 | Cereals and pulses — Determination of hidden insect infestation — Part 4: Rapid methods |
| BS ISO 14244 : 2014 | OILSEED MEALS - DETERMINATION OF SOLUBLE PROTEINS IN POTASSIUM HYDROXIDE SOLUTION |
| PREN 14243-3 : DRAFT 2017 | MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 3: SHREDS, CUTS AND CHIPS - METHODS FOR DETERMINING THEIR DIMENSION(S) INCLUDING PROTRUDING FILAMENTS DIMENSIONS |
| UNI CEN/TS 16011 : 2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| UNI EN ISO 1927-1 : 2012 | MONOLITHIC (UNSHAPED) REFRACTORY PRODUCTS - PART 1: INTRODUCTION AND CLASSIFICATION |
| ISO 18400-201:2017 | Soil quality — Sampling — Part 201: Physical pretreatment in the field |
| ISO 2817:1999 | Tobacco and tobacco products Determination of silicated residues insoluble in hydrochloric acid |
| UNE-EN 15415-1:2012 | Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles |
| NF EN ISO 8251 : 2011 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - MEASUREMENT OF ABRASION RESISTANCE OF ANODIC OXIDATION COATINGS |
| BS EN ISO 11508:2017 | Soil quality. Determination of particle density |
| UNI EN 196-6 : 2010 | METHODS OF TESTING CEMENT - PART 6: DETERMINATION OF FINENESS |
| DIN EN ISO 20568-2:2015-07 (Draft) | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| UNI CEN/TS 16305 : 2012 | LIMING MATERIALS - DETERMINATION OF THE DUST CONTENT OF GRANULAR LIMING MATERIALS BEFORE AND AFTER SIMULATED HANDLING CONDITIONS |
| EN 1431:2018 | Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation |
| ISO 11323:2010 | Iron ore and direct reduced iron Vocabulary |
| ISO 1003:2008 | Spices Ginger (Zingiber officinale Roscoe) Specification |
| NF EN ISO 11127-2 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| EN 1269:2015 | Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test |
| BS EN ISO 12956:1999 | Geotextiles and geotextile-related products. Determination of the characteristic opening size |
| UNI EN ISO 12956 : 2010 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE CHARACTERISTIC OPENING SIZE |
| DIN EN 1423:2013-03 | ROAD MARKING MATERIALS - DROP ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO |
| DIN EN ISO 11337:2011-04 | Plastics - Polyamides - Determination of -caprolactam and -laurolactam by gas chromatography (ISO 11337:2010) |
| DIN EN 993-16:1995-09 | DENSE SHAPED REFRACTORY PRODUCTS - METHOD OF TEST - PART 16: DETERMINATION OF RESISTANCE TO SULPHURIC ACID |
| DIN EN 13040:2008-01 | Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| UNE-EN 13892-3:2016 | Methods of test for screed materials - Part 3: Determination of wear resistance - Böhme |
| BS EN ISO 1597:2000 | Plastics. Unplasticized cellulose acetate. Determination of acetic acid yield |
| BS EN 13785 : 2005 | REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| BS EN ISO 182-2:2000 | Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures pH method |
| BS EN 1424:1998 | Road marking materials. Premix glass beads |
| BS EN 1094-1:1997 | Insulating refractory products Terminology for ceramic fibre products |
| BS EN ISO 1061:1999 | Plastics. Unplasticized cellulose acetate. Determination of free acidity |
| BS EN ISO 6427:2014 | Plastics. Determination of matter extractable by organic solvents (conventional methods) |
| BS EN 196-1:2016 | Methods of testing cement Determination of strength |
| BS EN 725-8:2006 | Advanced technical ceramics. Methods of test for ceramic powders Determination of tapped bulk density |
| UNE-EN 451-1:2017 | Method of testing fly ash - Part 1: Determination of free calcium oxide content |
| BS EN ISO 120:1998 | Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method |
| BS EN 12902:2004 | Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Methods of test |
| BS EN 13786 : 2004 | AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| ISO 1927-1:2012 | Monolithic (unshaped) refractory products — Part 1: Introduction and classification |
| BS EN 13036-1:2010 | Road and airfield surface characteristics. Test methods Measurement of pavement surface macrotexture depth using a volumetric patch technique |
| BS EN 13279-2:2014 | Gypsum binders and gypsum plasters Test methods |
| BS EN 13242:2013 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
| UNE-EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| BS EN ISO 3549:2002 | Zinc dust pigments for paints. Specifications and test methods |
| BS EN 1067:2005 | Adhesives. Examination and preparation of samples for testing |
| BS EN 1423:2012 | Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two |
| BS EN 993-18:2002 | Methods of test for dense shaped refractory products Determination of bulk density of granular materials by the water method with vacuum |
| BS EN ISO 787-18:1995 | General methods of test for pigments and extenders Determination of residue on sieve. Mechanical flushing procedure |
| ONORM EN ISO 12956 : 2010 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE CHARACTERISTIC OPENING SIZE |
| BS EN 993-12:1997 | Methods of test for dense shaped refractory products Determination of pyrometric cone equivalent (refractoriness) |
| I.S. EN 1094-1:2008 | INSULATING REFRACTORY PRODUCTS - PART 1: TERMINOLOGY, CLASSIFICATION AND METHODS OF TEST FOR HIGH TEMPERATURE INSULATION WOOL PRODUCTS |
| I.S. EN 1269:2015 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOOR COVERINGS BY MEANS OF A SOILING TEST |
| DIN EN 1402-3:2004-01 | UNSHAPED REFRACTORY PRODUCTS - PART 3: CHARACTERIZATION AS RECEIVED |
| I.S. EN 13279-2:2014 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 2: TEST METHODS |
| CEN/TS 14972:2011 | Fixed firefighting systems - Watermist systems - Design and installation |
| DIN EN 168:2002-04 | PERSONAL EYE PROTECTION - NON-OPTICAL TEST METHODS |
| EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| EN ISO 14232-1:2017 | Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017) |
| DIN EN 14701-2:2013-07 | Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration |
| DIN EN ISO 7711-3:2005-02 | Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:2004) |
| EN 1274:2004 | Thermal spraying - Powders - Composition, technical supply conditions |
| EN 12698-2:2007 | Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods |
| CEN/TR 16443:2013 | Backgrounds to the revision of EN 450-1:2005+A1:2007 - Fly ash for concrete |
| DIN EN 13892-3:2015-03 | METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
| EN 13279-2:2014 | Gypsum binders and gypsum plasters - Part 2: Test methods |
| DIN ISO 11464:2006-12 | SOIL QUALITY - PRETREATMENT OF SAMPLES FOR PHYSICO-CHEMICAL ANALYSES |
| DIN EN 12698-2:2007-06 | Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| BS 5834-1:2009 | Surface boxes, guards and underground chambers for the purposes of utilities Specification for guards and plinths |
| DIN ISO 8130-1:2005-04 | COATING POWDERS - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING |
| EN 15415-1:2011 | Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles |
| CEN/TS 14243:2010 | Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
| DIN EN ISO 20567-1:2017-07 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING (ISO 20567-1:2017) |
| DIN EN 14497:2004-12 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability; German version EN 14497:2004 |
| CEN/TS 16811-3:2015 | Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods |
| EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
| ENV 955-4 : 1997 | CHEMICAL ANALYSIS OF REFRACTORY PRODUCTS - PRODUCTS CONTAINING SILICA AND/OR ALUMINA (ANALYSIS BY FLAME ATOMIC ABSORPTION SPECTROMETRY (FAAS) AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROGRAPHY ICP)) |
| DIN EN ISO 20568-2:2017-10 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| EN 13036-1:2010 | Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique |
| EN 12274-7:2005 | Slurry surfacing - Test methods - Part 7: Shaking abrasion test |
| DIN EN ISO 6427:1998-10 | PLASTICS - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) (ISO 6427:2013) |
| NF EN ISO 11337 : 2011 | PLASTICS - POLYAMIDES - DETERMINATION OF EPSILONN-CAPROLACTAM AND OMEGA-LAUROLACTAM BY GAS CHROMATOGRAPHY |
| ONORM EN ISO 11337 : 2011 | PLASTICS - POLYAMIDES - DETERMINATION OF E-CAPROLACTAM AND W-LAUROLACTAM BY GAS CHROMATOGRAPHY |
| 16/30270983 DC : 0 | BS ISO 1213-2 - SOLID MINERAL FUELS - VOCABULARY - PART 2: TERMS RELATING TO SAMPLING, TESTING AND ANALYSIS |
| PREN 451-2 : DRAFT 2015 | METHOD OF TESTING FLY ASH - PART 2: DETERMINATION OF FINENESS BY WET SIEVING |
| 14/30295181 DC : 0 | BS EN ISO 17892-4 - GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| BS ISO 3618:1994 | Photography. Processing chemicals. Specifications for benzotriazole |
| ISO 1213-2:2016 | Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis |
| 08/30147925 DC : DRAFT JAN 2008 | BS ISO 3082 - IRON ORES - SAMPLING AND SAMPLE PREPARATION PROCEDURES |
| BS 7079-E7(1994) : 1994 AMD 9730 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METALLIC BLAST CLEANING ABRASIVES - METHOD FOR DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| BS EN 16179:2012 | Sludge, treated biowaste and soil. Guidance for sample pretreatment |
| UNE-EN 13285:2010 | Unbound mixtures - Specifications |
| BS 3900-B17:1991 | Methods of test for paints Preparation of acid extracts from dried paint films |
| 08/30142165 DC : 0 | BS 5834-4:2009 - SURFACE BOXES, GUARDS AND UNDERGROUND CHAMBERS FOR UTILITIES PURPOSES - PART 4: SPECIFICATION FOR PREFORMED UTILITY CHAMBERS |
| 09/30196295 DC : 0 | BS EN ISO 8251 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - MEASUREMENT OF ABRASION RESISTANCE OF ANODIC OXIDATION COATINGS |
| BS ISO 3632-2:2010 | Spices. Saffron (Crocus sativus L.) Test methods |
| I.S. EN ISO 12086-2:2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ISO 11277:2009 | Soil quality Determination of particle size distribution in mineral soil material Method by sieving and sedimentation |
| BS EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| ISO 2920:2004 | Whey cheese — Determination of dry matter (Reference method) |
| I.S. EN 1402-3:2003 | UNSHAPED REFRACTORY PRODUCTS - PART 3: CHARACTERIZATION AS RECEIVED |
| 10/30219012 DC : 0 | BS EN 15415-1 - SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES |
| I.S. EN 12864:2001 | LOW-PRESSURE, NON-ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| 04/30044646 DC : DRAFT JUNE 2004 | BS 5911-6 - CONCRETE PIPES AND ANCILLARY PRODUCTS - PART 6: SPECIFICATION FOR ROAD GULLIES AND GULLY COVER SLABS |
| BS ISO 3310-1:2016 | Test sieves. Technical requirements and testing Test sieves of metal wire cloth |
| 16/30341482 DC : 0 | BS EN ISO 11508 - SOIL QUALITY - DETERMINATION OF PARTICLE DENSITY |
| BS ISO 1003:2008 | Spices. Ginger (Zingiber officinale Roscoe). Specification |
| API 13C REDLINE : 2010 | RECOMMENDED PRACTICE ON DRILLING FLUIDS PROCESSING SYSTEMS EVALUATION |
| BS 5293-4:1990 | Sampling and testing carbon black for use in the rubber industry Method for determination of pellet size distribution |
| 04/30090843 DC : DRAFT MAY 2004 | BS ISO 21869 - RUBBER COMPOUNDING INGREDIENTS - MAGNESIUM OXIDE - METHODS OF TEST |
| 13/30278741 DC : 0 | BS EN 13279-2 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 2: TEST METHODS |
| 16/30301923 DC : 0 | BS EN ISO 14232-1 - THERMAL SPRAYING - POWDERS - PART 1: CHARACTERISATION AND TECHNICAL SUPPLY CONDITIONS |
| 04/30090429 DC : DRAFT OCT 2004 | ISO 11464 - SOIL QUALITY - PRETREATMENT OF SAMPLES FOR PHYSICO-CHEMICAL ANALYSES |
| UNI EN 1431 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| ISO 3082:2017 | Iron ores — Sampling and sample preparation procedures |
| DD ENV 1094-7:1994 | Insulating refractory products Methods of test for ceramic fibre products |
| 06/19977151 DC : DRAFT JUN 2006 | BS ISO 13779-3 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 3: CHEMICAL ANALYSIS AND CHARACTERIZATION OF CRYSTALLINITY AND PHASE PURITY |
| BS ISO 422:1994 | Photography. Processing chemicals. Specifications for p-methylaminophenol sulfate |
| BS 2782-1.130C(1993) : 1993 AMD 13566 | METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE THERMAL STABILITY OF POLYVINYL CHLORIDE BY THE CONDUCTOMETRIC METHOD |
| 00/120794 DC : DRAFT FEB 2000 | BS 3483-X - METHODS FOR TESTING PIGMENTS FOR PAINTS - DETERMINATION OF RESIDUE ON SIEVE - WATER METHOD - MANUAL PROCEDURE |
| BS EN ISO 14232-1:2017 | Thermal spraying. Powders Characterization and technical supply conditions |
| ISO 10238:1999 | Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Determination of sulfur content by an instrumental method |
| BS ISO 3310-2:2013 | Test sieves. Technical requirements and testing Test sieves of perforated metal plate |
| 06/30145499 DC : 0 | EN 4637 - AEROSPACE SERIES - BLAST MEDIA - WHITE CORUNDUM |
| PREN 16129 : DRAFT 2010 | PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 100 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| BS ISO 9022-6:2015 | Optics and photonics. Environmental test methods Dust |
| DD CEN/TS 16305:2012 | Liming materials. Determination of the dust content of granular liming materials before and after simulated handling conditions |
| I.S. EN 15415-2:2012 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES |
| PREN 15415-3 : DRAFT 2010 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES |
| BS EN ISO 20541:2008 | Milk and milk products. Determination of nitrate content. Method by enzymatic reduction and molecular- absorption spectrometry after Griess reaction |
| DIN ISO 8130-1 E : 2005 | COATING POWDERS - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING |
| 00/107013 DC : DRAFT OCT 2000 | PREN 13963 - JOINTING MATERIALS FOR GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 99/718298 DC : DRAFT DEC 1999 | PREN 13785 - REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100KGH |
| BS ISO 4701:2017 | Iron ores and direct reduced iron. Determination of size distribution by sieving |
| 13/30280254 DC : 0 | BS ISO 249 - RUBBER, RAW NATURAL - DETERMINATION OF DIRT CONTENT |
| 18/30371125 DC : DRAFT APR 2018 | BS EN ISO 8130-1 - COATING POWDERS - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING |
| UNE-ISO 5560:2011 | Dehydrated garlic (Allium sativum L.) -- Specification |
| 03/106014 DC : DRAFT MAR 2003 | ISO 6106 - ABRASIVE PRODUCTS - CHECKING THE GRIT SIZE OF SUPERABRASIVES |
| ISO 6732:2010 | Milk and milk products — Determination of iron content — Spectrometric method (Reference method) |
| 13/30278705 DC : 0 | BS EN 13108-9 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 9: ASPHALT FOR ULTRA-THIN-LAYERS (AUTL) |
| BS 2782-4.455A(1993) : 1993 AMD 10347 | METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) |
| 11/30251994 DC : 0 | BS EN 13963 - JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 12/30212262 DC : 0 | BS ISO 14629 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FLOWABILITY OF CERAMIC POWDERS |
| BS ISO 9276-2:2014 | Representation of results of particle size analysis Calculation of average particle sizes/diameters and moments from particle size distributions |
| BS ISO 18283:2006 | Hard coal and coke. Manual sampling |
| BS EN 16811-1:2016 | Winter service equipment and products. De-icing agents Sodium chloride. Requirements and test methods |
| UNE-ISO 5559:2010 | Dehydrated onio (Allium cepa Linnaeus). Specification. |
| PD 6682-3:2003 | Aggregates Aggregates for mortar. Guidance on the use of BS EN 13139 |
| BS 8471:2007 | Guide to particle sizing methods |
| 07/30164079 DC : 0 | BS ISO 679 - METHODS OF TESTING CEMENTS - DETERMINATION OF STRENGTH |
| BS ISO 10627-2:1996 | Hydraulic agricultural sprayers. Data sheets Technical specifications related to components |
| 07/30165263 DC : 0 | BS EN 1431 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RECOVERED BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| BS ISO 20481:2008 | Coffee and coffee products. Determination of the caffeine content using high performance liquid chromatography (HPLC). Reference method |
| DIN ISO 9276-1:2004-09 | Representation of results of particle size analysis - Part 1: Graphical representation (ISO 9276-1:1998) |
| BS EN 13285:2010 | Unbound mixtures. Specifications |
| BS ISO 10635:1999 | Refractory products. Methods of test for ceramic fibre products. |
| UNI 10667-4 : 2011 | PLASTIC RAW-SECONDARY MATERIALS - POLYVINYLCHLORIDE FOR GENERAL PURPOSES, FROM THE RECYCLING OF PRE AND/OR POST CONSUMER LIQUID CONTAINERS - PART 4: REQUIREMENTS AND TEST METHODS |
| BS ISO 14849:1999 | Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Indophenol method |
| BS 2782-4.451S(1996) : 1996 | METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - PLASTICS - PHENOLIC RESIN POWDER - SIEVE ANALYSIS USING AIR-JET SIEVE APPARATUS |
| 04/30119106 DC : DRAFT AUG 2004 | EN 14972 - FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION |
| ISO 13779-3:2008 | Implants for surgery Hydroxyapatite Part 3: Chemical analysis and characterization of crystallinity and phase purity |
| 04/30091864 DC : DRAFT JUL 2004 | ISO 22498 - PLASTICS - VINYL CHLORIDE HOMOPOLYMER AND COPOLYMER RESINS - PARTICLE SIZE DETERMINATION BY MECHANICAL SIEVING |
| BS ISO 2920:2004 | Whey cheese. Determination of dry matter (Reference method) |
| BS ISO 11648-2:2001 | Statistical aspects of sampling from bulk materials Sampling of particulate materials |
| BS ISO 22498:2005 | Plastics. Vinyl chloride homopolymer and copolymer resins. Particle size determination by mechanical sieving |
| 14/30303776 DC : 0 | BS EN 13285 - UNBOUND MIXTURES - SPECIFICATIONS |
| 03/113392 DC : DRAFT SEP 2003 | BS EN ISO 7711-3 - DENTISTRY - DIAMOND ROTARY INSTRUMENTS - PART 3 - GRIT SIZES, DESIGNATION AND COLOUR CODE |
| PREN 12620 : DRAFT 2015 | AGGREGATES FOR CONCRETE |
| 08/30166566 DC : DRAFT MAY 2008 | BS ISO 8942 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF INDIVIDUAL PELLET CRUSHING STRENGTH |
| 06/30157118 DC : 0 | BS ISO 23145-1 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 1: TAP DENSITY |
| BS ISO 6344-2:1998 | Coated abrasives. Grain size analysis Determination of grain size distribution of macrogrits P12 to P220 |
| 09/30186079 DC : 0 | BS EN 12948 - LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING |
| BS 7755-5.3(1998) : 1998 | SOIL QUALITY - PHYSICAL METHODS - DETERMINATION OF PARTICLE DENSITY |
| NFL 06 825 : 2010 | AEROSPACE SERIES - BLAST MEDIA - GRIT CAST STEEL SHOT |
| ISO 17372:2008 | Animal feeding stuffs — Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography |
| UNI EN ISO 11127-2 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| ISO 3299:1994 | Photography Processing chemicals Specifications for 1-phenyl-3-pyrazolidinone |
| I.S. EN ISO 11508:2017 | SOIL QUALITY - DETERMINATION OF PARTICLE DENSITY (ISO 11508:2017) |
| NFL 06 850 : 2001 | AEROSPACE SERIES - NON METALLIC MATERIALS - PROJECTING PRODUCTS - PLASTIC PARTICLES - TECHNICAL SPECIFICATION |
| ISO 5794-1:2010 | Rubber compounding ingredients Silica, precipitated, hydrated Part 1: Non-rubber tests |
| I.S. EN 4638:2010 | AEROSPACE SERIES - BLAST MEDIA - BROWN CORUNDUM, WITHOUT IRON |
| DEFSTAN 03-21/4(2008) : 2008 | MECHANICAL METHODS FOR THE INDUCEMENT OF RESIDUAL SURFACE COMPRESSIVE STRESSES |
| S.R. CEN/TS 16305:2012 | LIMING MATERIALS - DETERMINATION OF THE DUST CONTENT OF GRANULAR LIMING MATERIALS BEFORE AND AFTER SIMULATED HANDLING CONDITIONS |
| ISO 3728:2004 | Ice-cream and milk ice — Determination of total solids content (Reference method) |
| I.S. EN 10298:2005 | STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR |
| ISO 12686:1999 | Metallic and other inorganic coatings — Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish |
| BS EN ISO 8251:2011 | Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings |
| BS ISO 13779-3:2008 | Implants for surgery. Hydroxyapatite Chemical analysis and characterization of crystallinity and phase purity |
| ISO 17792:2006 | Milk, milk products and mesophilic starter cultures — Enumeration of citrate-fermenting lactic acid bacteria — Colony-count technique at 25 degrees C |
| ISO 2395:1990 | Test sieves and test sieving — Vocabulary |
| UNI 10667-8 : 2011 | RECYCLED PLASTICS MATERIALS - POLYETHYLENTEREPHTALATE FLAKES FOR BLOW MOULDING, FROM THE RECYCLING OF POST-CONSUMER LIQUID CONTAINERS - PART 8: REQUIREMENTS AND TEST METHODS |
| ISO 10635:1999 | Refractory products — Methods of test for ceramic fibre products |
| UNI EN 4637 : 2011 | AEROSPACE SERIES - BLAST MEDIA - WHITE CORUNDUM |
| ISO 8251:2011 | Anodizing of aluminium and its alloys Measurement of abrasion resistance of anodic oxidation coatings |
| I.S. EN ISO 1927-3:2012 | MONOLITHIC (UNSHAPED) REFRACTORY PRODUCTS - PART 3: CHARACTERIZATION AS RECEIVED (ISO 1927-3:2012) |
| 15/30311094 DC : 0 | BS EN 13139 - AGGREGATES FOR MORTAR |
| I.S. EN 15348:2014 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES |
| PREN 15348 : DRAFT 2013 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES |
| BS 2000-91(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMEN EMULSIONS AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| UNE-EN ISO 787-7:2010 | General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009) |
| DIN EN 196-6:2010-05 | METHODS OF TESTING CEMENT - PART 6: DETERMINATION OF FINENESS |
| I.S. EN ISO 20568-2:2017 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017) |
| BS EN 196-6:2010 | Methods of testing cement Determination of fineness |
| ISO 16349:2015 | Refractory materials Determination of abrasion resistance at elevated temperature |
| EN ISO 8130-1:2010 | Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992) |
| I.S. EN ISO 11125-2:1998 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR METALLIC BLAST-CLEANING ABRASIVES - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| ISO 249:2016 | Rubber, raw natural Determination of dirt content |
| I.S. EN ISO 12956:2010 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE CHARACTERISTIC OPENING SIZE |
| DIN EN 13938-2:2005-01 | Explosives for civil uses - Propellants and rocket propellants - Part 2: Determination of resistance to electrostatic energy |
| DIN EN 12864:2006-03 | LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| DIN EN 13279-2:2014-03 | Gypsum binders and gypsum plasters - Part 2: Test methods; German version EN 13279-2:2014 |
| DIN EN 1429:2013-08 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| DIN EN 993-17:1999-01 | METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 17: DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACUUM |
| DIN EN 13036-1:2010-10 | Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique |
| BS EN 451-1:2017 | Method of testing fly ash Determination of free calcium oxide content |
| 17/30348303 DC : 0 | BS EN 17087 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE FOR TESTING OF RELEASE AND ANALYSIS OF CONTENT |
| BS EN ISO 10082:2000 | Plastics. Phenolic resins. Classification and test methods |
| BS EN 12698-2:2007 | Chemical analysis of nitride bonded silicon carbide refractories XRD methods |
| UNE-EN 13279-2:2014 | Gypsum binders and gypsum plasters - Part 2: Test methods |
| ISO 23145-2:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic powders — Part 2: Untapped density |
| UNE-EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
| UNE-EN ISO 20567-1:2017 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2017) |
| BS EN ISO 182-4:2001 | Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Potentiometric method |
| BS EN 13108-5:2016 | Bituminous mixtures. Material specifications Stone Mastic Asphalt |
| BS EN ISO 13501:2011 | Petroleum and natural gas industries. Drilling fluids. Processing equipment evaluation |
| BS EN ISO 12677:2011 | Chemical analysis of refractory products by X-ray fluorescence (XRF) Fused cast-bead method |
| BS EN 933-2:1996 | Tests for geometrical properties of aggregates Determination of particle size distribution. Test sieves, nominal size of apertures |
| I.S. EN 12902:2005 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - INORGANIC SUPPORTING AND FILTERING MATERIALS - METHODS OF TEST |
| I.S. EN 15346:2014 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| DIN EN 725-8:2006-06 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 8: DETERMINATION OF TAPPED BULK DENSITY |
| DIN EN 12864 E : 2006 AMD 3 2010 | LOW PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| I.S. EN 13963:2014 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 13108-2:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: ASPHALT CONCRETE FOR VERY THIN LAYERS (BBTM) |
| I.S. EN ISO 3093:2009 | WHEAT, RYE AND THEIR FLOURS, DURUM WHEAT AND DURUM WHEAT SEMOLINA - DETERMINATION OF THE FALLING NUMBER ACCORDING TO HAGBERG-PERTEN |
| DIN ISO 9276-2:2006-02 | REPRESENTATION OF RESULTS OF PARTICLE SIZE ANALYSIS - PART 2: CALCULATION OF AVERAGE PARTICLE SIZES/DIAMETERS AND MOMENTS FOR PARTICLE SIZE DISTRIBUTIONS |
| I.S. EN 13036-1:2010 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 1: MEASUREMENT OF PAVEMENT SURFACE MACROTEXTURE DEPTH USING A VOLUMETRIC PATCH TECHNIQUE |
| I.S. EN 1423:2012 | ROAD MARKING MATERIALS - DROP ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO |
| I.S. EN 451-1:2017 | METHOD OF TESTING FLY ASH - PART 1: DETERMINATION OF FREE CALCIUM OXIDE CONTENT |
| I.S. EN ISO 8620:1996 | PLASTICS - PHENOLIC RESIN POWDER - SIEVE ANALYSIS USING AIR-JET SIEVE APPARATUS |
| I.S. EN 1067:2006 | ADHESIVES - EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING |
| DIN EN 725-9:2006-05 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 9: DETERMINATION OF UNTAPPED BULK DENSITY |
| I.S. EN 13040:2007 | SOIL IMPROVERS AND GROWING MEDIA - SAMPLE PREPARATION FOR CHEMICAL AND PHYSICAL TESTS, DETERMINATION OF DRY MATTER CONTENT, MOISTURE CONTENT AND LABORATORY COMPACTED BULK DENSITY |
| I.S. EN ISO 11337:2010 | PLASTICS - POLYAMIDES - DETERMINATION OF EPSILON-CAPROLACTAM AND OMEGA-LAUROLACTAM BY GAS CHROMATOGRAPHY |
| DIN EN 1402-1:2004-01 | UNSHAPED REFRACTORY PRODUCTS - PART 1: INTRODUCTION AND CLASSIFICATION |
| I.S. EN 15002:2015 | CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
| I.S. EN 13108-5:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
| I.S. EN ISO 6427:2014 | PLASTICS - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) (ISO 6427:2013) |
| DIN EN 725-8:1997-05 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 8: DETERMINATION OF TAPPED BULK DENSITY |
| DIN EN 725-9:1997-05 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 9: DETERMINATION OF UNTAMPED BULK DENSITY |
| DIN EN ISO 11127-2:2012-04 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2011) |
| I.S. EN ISO 11127-2:2011 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION (ISO 11127-2:2011) |
| I.S. EN ISO 14673-1:2004 | MILK AND MILK PRODUCTS - DETERMINATION OF NITRATE AND NITRITE CONTENTS - PART 1: METHOD USING CADMIUM REDUCTION AND SPECTROMETRY |
| DIN EN ISO 182-4:2001-02 | PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 4: POTENTIOMETRIC METHOD |
| I.S. EN 13892-3:2014 | METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
| I.S. EN ISO 20567-1:2017 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING (ISO 20567-1:2017) |
| I.S. EN 12948:2010 | LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING |
| EN ISO 11127-2:2011 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2011) |
| I.S. EN ISO 13501:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION |
| DIN EN 993-20:2004-08 | METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 20: DETERMINATION OF RESISTANCE TO ABRASION AT AMBIENT TEMPERATURE |
| I.S. EN 14701-2:2013 | CHARACTERISATION OF SLUDGES - FILTRATION PROPERTIES - PART 2: DETERMINATION OF THE SPECIFIC RESISTANCE TO FILTRATION |
| I.S. EN 1429:2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| I.S. EN 1235:1996 | SOLID FERTILIZERS - TEST SIEVING (ISO 8397:1988 MODIFIED) |
| DIN EN 1269:2016-02 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOOR COVERINGS BY MEANS OF A SOILING TEST |
| I.S. EN 451-2:2017 | METHOD OF TESTING FLY ASH - PART 2: DETERMINATION OF FINENESS BY WET SIEVING |
| I.S. EN 196-1:2016 | METHODS OF TESTING CEMENT - PART 1: DETERMINATION OF STRENGTH |
| DIN EN 1274:2005-02 | THERMAL SPRAYING - POWDERS - COMPOSITION, TECHNICAL SUPPLY CONDITIONS |
| UNI EN ISO 13501 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION |
| BS 3892-1:1993 | Pulverized-fuel ash Specification for pulverized-fuel ash for use with Portland cement |
| BS 3892-1:1997 | Pulverized-fuel ash Specification for pulverized-fuel ash for use with Portland cement |
| PD 6682-6:2003 | Aggregates Aggregates for unbound and hydraulically bound materials for use in civil engineering works and road construction. Guidance on the use of BS EN 13242 |
| BS PD6682-1(2009) : 2009 | AGGREGATES - PART 1: AGGREGATES FOR CONCRETE - GUIDANCE ON THE USE OF BS EN 12620 |
| BS PD6682-2(2009) : 2009 | AGGREGATES - PART 2: AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS - GUIDANCE ON THE USE OF BS EN 13043 |
| DIN EN 50281-2-1 : 1999 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 2-1: TEST METHODS; METHODS FOR DETERMINING THE MINIMUM IGNITION TEMPERATURES OF DUST |
| BS 5834-4:2011 | Surface boxes, guards and underground chambers for the purposes of utilities Specification for utility chambers |
| BS PAS 100(2005) : 2005 | SPECIFICATION FOR COMPOSTED MATERIALS |
| BS 410:1986 | Specification for test sieves |
| VDE 0170-15-2-1 : 1999 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 2-1: TEST METHODS; METHODS FOR DETERMINING THE MINIMUM IGNITION TEMPERATURES OF DUST |
| DIN EN 61241-2-2 : 1996 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 2: TEST METHODS - SECTION 2: METHOD FOR DETERMINING THE ELECTRICAL RESISTIVITY OF DUST IN LAYERS |
| BS 6043-2.11:1995 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke Determination of volatile matter content |
| VDE 0170-15-2-2 : 1996 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 2: TEST METHODS - SECTION 2: METHOD FOR DETERMINING THE ELECTRICAL RESISTIVITY OF DUST IN LAYERS |
| BS 5202-1:2000 | Methods for chemical analysis of tobacco and tobacco products Determination of silicated residues insoluble in hydrochloric acid |
| BS 6043-1.13:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture Electrode pitch - Determination of sulfur content |
| BS 6043-1.11:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture Determination of the atomic C/H ratio of the quinoline-insoluble material |
| BS 6043-1.6:1998 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch Determination of coking value - Section 1.6 Determination of coking value |
| DIN 69176-2:1985-03 | GRAINS OF FUSED ALUMINIUM OXIDE AND SILICON CARBIDE FOR COATED ABRASIVES; METHOD OF TEST OF MACROGRITS, GRIT P12 TO P220 |
| 04/30108555 DC : DRAFT JUL 2004 | BS EN 14079 - NON-ACTIVE MEDICAL DEVICES - TEST METHODS FOR ABSORBENT COTTON GAUZES AND ABSORBENT COTTON AND VISCOSE GAUZES USED IN THE MANUFACTURING OF COMPRESSES AND WOUND PACKING PRODUCTS |
| ISO 9276-2:2014 | Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions |
| 06/30156305 DC : 0 | BS EN 14079-1 - NON-ACTIVE MEDICAL DEVICES - PROPERTIES FOR COMPRESSES AND WOUND PACKING PRODUCTS FOR MEDICAL USE - PART 1: TEST METHODS AND REQUIREMENTS FOR ABSORBENT COTTON GAUZE AND ABSORBENT COTTON AND VISCOSE GAUZES USED IN THE MANUFACTURING OF COMPRESSES AND WOUND PACKING PRODUCTS |
| BS ISO 11916-2:2013 | Soil quality. Determination of selected explosives and related compounds Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS) |
| PREN 15415-2 : DRAFT 2010 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES |
| DEFSTAN 03-21/1(1983) : 1983 | MECHANICAL METHODS FOR THE INDUCEMENT OF COMPRESSIVE SURFACE RESIDUAL STRESSES |
| ISO 8332:2011 | Rubber compounding ingredients Sulfur Methods of test |
| BS ISO 249:2014 | Rubber, raw natural. Determination of dirt content |
| BIS IS 16052-5 : 2013 | REFRACTORY MORTARS - PART 5: DETERMINATION OF GRAIN SIZE DISTRIBUTION (SIEVE ANALYSIS) |
| I.S. EN 1431:2018 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| I.S. EN 725-9:2006 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 9: DETERMINATION OF UN-TAPPED BULK DENSITY |
| ISO 5937:1980 | Sodium perborates for industrial use Determination of degree of attrition |
| 01/714936 DC : DRAFT NOV 2001 | ISO 4934 - STEEL AND IRON - DETERMINATION OF SULFUR CONTENT - GRAVIMETRIC METHOD |
| DIN EN 15415-3:2012-06 | Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles |
| DIN ISO 20481:2011-01 | Coffee and coffee products - Determination of the caffeine content using high performance liquid chromatography (HPLC) - Reference method (ISO 20481:2008) |
| BS 410-2:2000 | Test sieves. Technical requirements and testing Test sieves of perforated metal plate |
| 03/306131 DC : DRAFT APR 2003 | EN 1067 - ADHESIVES - EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING |
| ISO 18283:2006 | Hard coal and coke Manual sampling |
| BS 3230:1978 | Specification for photographic grade 1-phenyl-3-pyrazolidinone (Phenidone) |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| I.S. EN 1402-1:2003 | UNSHAPED REFRACTORY PRODUCTS - PART 1: INTRODUCTION AND CLASSIFICATION |
| BS EN ISO 14629:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of flowability of ceramic powders |
| BS 5600-2.12(1987) : 1987 | POWDER METALLURGICAL MATERIALS AND PRODUCTS - METHODS OF SAMPLING AND TESTING METALLIC POWDERS - DETERMINATION OF PARTICLE SIZE BY DRY SIEVING |
| DIN 69176-1:1985-03 | GRAINS OF FUSED ALUMINIUM OXIDE AND SILICON CARBIDE FOR COATED ABRASIVES; DESIGNATION, GRAIN SIZE DISTRIBUTION |
| 14/30285008 DC : 0 | BS ISO 3310-1 - TEST SIEVES - TECHNICAL REQUIREMENTS AND TESTING - PART 1: TEST SIEVES OF METAL WIRE CLOTH |
| NF ISO 5794-1 : 2010 | RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 1: NON-RUBBER TESTS |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| BS EN 15428:2007 | Soil improvers and growing media. Determination of particle size distribution |
| BS EN 61241-2-2:1996 | Electrical apparatus for use in the presence of combustible dust. Test methods Method for determining the electrical resistivity of dust in layers |
| DIN ISO 11916-2:2014-11 | SOIL QUALITY - DETERMINATION OF SELECTED EXPLOSIVES AND RELATED COMPOUNDS - PART 2: METHOD USING GAS CHROMATOGRAPHY (GC) WITH ELECTRON CAPTURE DETECTION (ECD) OR MASS SPECTROMETRIC DETECTION (MS) (ISO 11916-2:2013) |
| PD CEN/TR 16443:2013 | Backgrounds to the revision of EN 450-1:2005+A1:2007. Fly ash for concrete |
| BS ISO 11277:2009 | Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation |
| BS ISO 17531:2002 | Photography. Processing chemicals. Specifications for 4-(N-ethyl-N-2- methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate |
| 04/30115588 DC : DRAFT JUN 2004 | ISO 8332 - RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST |
| 15/30311103 DC : 0 | BS EN 13242 - AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
| 11/30250575 DC : 0 | BS EN 1429 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| BS ISO 21338:2010 | Water quality. Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test) |
| UNE-EN 15348:2015 | Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates |
| DIN EN 60249-1:1994-05 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS |
| BS ISO 8511:2011 | Rubber compounding ingredients. Carbon black. Determination of pellet size distribution |
| DIN ISO 11916-1:2014-11 | SOIL QUALITY - DETERMINATION OF SELECTED EXPLOSIVES AND RELATED COMPOUNDS - PART 1: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) WITH ULTRAVIOLET DETECTION (ISO 11916-1:2013) |
| BS EN 15415-2:2012 | Solid recovered fuels. Determination of particle size distribution Maximum projected length method (manual) for large dimension particles |
| BS EN 4637:2010 | Aerospace series. Blast media. White corundum |
| BS EN 15415-3:2012 | Solid recovered fuels. Determination of particle size distribution Method by image analysis for large dimension particles |
| BS PD6682-6(2009) : 2009 | AGGREGATES - PART 6: AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORKS AND ROAD CONSTRUCTION - GUIDANCE ON THE USE OF BS EN 13242 |
| BS ISO 5446:2017 | Ferromanganese. Specification and conditions of delivery |
| BS 7897-3:1997 | Specification for lac and shellac Bleached lac |
| DEFSTAN 03-21/5(2011) : 2011 | MECHANICAL METHODS FOR THE INDUCEMENT OF RESIDUAL SURFACE COMPRESSIVE STRESSES |
| BS 3105:1978 | Specification for photographic grade p-methylaminophenol sulphate (metol) |
| BS ISO 5794-1:2010 | Rubber compounding ingredients. Silica, precipitated, hydrated Non-rubber tests |
| S.R. CEN/TS 16811-3:2015 | WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| 03/300548 DC : DRAFT FEB 2003 | EN 12902 - PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - INORGANIC SUPPORTING AND FILTERING MATERIALS - METHODS OF TEST |
| 06/30146090 DC : DRAFT FEB 2006 | ISO 5529 - WHEAT - DETERMINATION OF SEDIMENTATION INDEX - ZELENY TEST |
| DIN EN ISO 20541:2008-12 | MILK AND MILK PRODUCTS - DETERMINATION OF NITRATE CONTENT - METHOD BY ENZYMATIC REDUCTION AND MOLECULAR-ABSORPTION SPECTROMETRY AFTER GRIESS REACTION |
| 10/30202152 DC : 0 | BS ISO 11916-2 - SOIL QUALITY - DETERMINATION OF SELECTED EXPLOSIVE COMPOUNDS - PART 2: METHOD USING GAS CHROMATOGRAPHY (GC) WITH ELECTRON CAPTURE DETECTION (ECD) OR MASS SPECTROMETRIC DETECTION (MS) |
| I.S. EN 15415-3:2012 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES |
| BS EN 15348:2014 | Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates |
| BS EN ISO 1927-1:2012 | Monolithic (unshaped) refractory products Introduction and classification |
| 06/30153256 DC : 0 | BS EN 14079-2 - NON-ACTIVE MEDICAL DEVICES - PROPERTIES FOR COMPRESSES AND WOUND PACKING PRODUCTS FOR MEDICAL USE - PART 2: TEST METHODS FOR ABSORBENT COTTON GAUZE AND ABSORBENT COTTON AND VISCOSE GAUZE |
| BS EN ISO 23145-1:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders Tap density |
| PD 6682-7:2003 | Aggregates Armourstone. Guidance on the use of BS EN 13383 |
| UNE-EN 16129:2014 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| BS ISO 13909-1:2016 | Hard coal and coke. Mechanical sampling General introduction |
| DIN EN ISO 14232-1 E : 2017 | THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017) |
| 10/30199136 DC : 0 | BS ISO 11916-1 - SOIL QUALITY - DETERMINATION OF SELECTED EXPLOSIVE COMPOUNDS - PART 1: METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC) WITH ULTRAVIOLET DETECTION |
| UNI EN ISO 787-7 : 2009 | GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 7: DETERMINATION OF RESIDUE ON SIEVE - WATER METHOD - MANUAL PROCEDURE |
| BS ISO 1213-2:2016 | Solid mineral fuels. Vocabulary Terms relating to sampling, testing and analysis |
| BS ISO 16742:2014 | Iron ores. Sampling of slurries |
| 07/30165257 DC : 0 | BS EN 1429 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMEN EMULSIONS, AND DETERMINATION OF STORAGE ABILITY BY SIEVING |
| PD 6682-9:2003 | Aggregates Guidance on the use of European test method standards |
| DIN EN ISO 1927-3:2013-03 | MONOLITHIC (UNSHAPED) REFRACTORY MATERIALS - PART 3: CHARACTERIZATION AS RECEIVED (ISO 1927-3:2012) |
| BS 2782-4 Method 454F:1978 | Methods of testing plastics. Chemical properties Sieve analysis of vinyl chloride homopolymer and copolymer resins using air-jet sieve apparatus |
| 05/30124589 DC : 0 | EN 1094-7 - INSULATING REFRACTORY PRODUCTS - PART 7: METHODS OF TEST FOR CERAMIC FIBRE PRODUCTS |
| DD CEN/TS 14243:2010 | Materials produced from end of life tyres. Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
| BS 5659-6:1983 | Methods of test for acid-grade fluorspar Determination of total phosphorus content |
| PD 6682-1:2003 | Aggregates Aggregates for concrete. Guidance on the use of BS EN 12620 |
| BIS IS 16036 : 2012 | GREEN COFFEE - PREPARATION OF SAMPLES FOR USE IN SENSORY ANALYSIS |
| BS ISO 23145-1 : 2007 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 1: TAP DENSITY |
| ISO 8130-1:1992 | Coating powders Part 1: Determination of particle size distribution by sieving |
| ISO 3618:1994 | Photography Processing chemicals Specifications for benzotriazole |
| BS 7164-8:1990 | Chemical tests for raw and vulcanized rubber Method for determination of dirt content of raw natural rubber |
| 05/30133097 DC : DRAFT MAY 2005 | ISO 1437 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF SIEVE RESIDUE |
| ISO 422:1994 | Photography Processing chemicals Specifications for p-methylaminophenol sulfate |
| UNI ISO 11648-2 : 2008 | STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 2: SAMPLING OF PARTICULATE MATERIALS |
| UNI 10667-2 : 2010 | PLASTIC RAW-SECONDARY MATERIALS - POLYETHYLENE FOR GENERAL PURPOSES FROM THE RECYCLING OF INDUSTRIAL RESIDUES AND/OR FROM PRE AND/OR POST CONSUMER MATERIALS - PART 2: REQUIREMENTS AND TEST METHODS |
| UNI ISO 8942 : 2014 | RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF INDIVIDUAL PELLET CRUSHING STRENGTH |
| DIN EN 15415-1:2011-11 | Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles |
| DIN EN ISO 16282:2008-08 | METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - DETERMINATION OF RESISTANCE TO ABRASION AT AMBIENT TEMPERATURE |
| I.S. CEN TS 15415:2006 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SCREEN METHOD |
| ISO 3632-2:2010 | Spices — Saffron (Crocus sativus L.) — Part 2: Test methods |
| I.S. CEN ISO TS 17892-4:2004 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| UNI EN 4638 : 2011 | AEROSPACE SERIES - BLAST MEDIA - BROWN CORUNDUM, WITHOUT IRON |
| BS 5911-6(2004) : 2004 | CONCRETE PIPES AND ANCILLARY CONCRETE PRODUCTS - PART 6: SPECIFICATION FOR ROAD GULLIES AND GULLY COVER SLABS |
| ISO 2325:1986 | Coke Size analysis (Nominal top size 20 mm or less) |
| I.S. EN ISO 8251:2011 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - MEASUREMENT OF ABRASION RESISTANCE OF ANODIC OXIDATION COATINGS |
| ISO 679:2009 | Cement Test methods Determination of strength |
| ISO 3118:1976 | Sodium perborates for industrial use — Determination of particle size distribution by mechanical sieving |
| ISO 11648-1:2003 | Statistical aspects of sampling from bulk materials — Part 1: General principles |
| ISO 182-1:1990 | Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 1: Congo red method |
| ISO 10844:2014 | Acoustics Specification of test tracks for measuring noise emitted by road vehicles and their tyres |
| UNE 34903:2014 | Cereals and cereal products. Determination of triticum durum quality using a sedimentation test method in a sodium dodecyl sulphate (SDS) solution. |
| UNE-ISO 2817:2011 | Tobacco and tobacco products. Determination of silicated residues insoluble in hydrochloric acid. |
| UNI EN 13285 : 2010 | UNBOUND MIXTURES - SPECIFICATION |
| S.R. CEN TS 14243:2010 | MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
| UNI EN ISO 8130-1 : 2011 | COATING POWDERS - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING |
| EN 13285:2010 | Unbound mixtures - Specifications |
| UNE-EN 16179:2013 | Sludge, treated biowaste and soil - Guidance for sample pretreatment |
| UNI EN 16179 : 2012 | SLUDGE, TREATED BIOWASTE AND SOIL - GUIDANCE FOR SAMPLE PRETREATMENT |
| BS 4325-9:1984 | Methods for analysis of oilseed residues Preparation of test samples |
| UNI CEN/TS 14972 : 2011 | FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION |
| UNI 10667-7 : 2011 | PLASTIC RAW-SECONDARY MATERIALS - POLYETHYLENTEREPHTALATE FLAKES FOR THE PRODUCTION OF FIBRES, FROM THE RECYCLING OF POST CONSUMER LIQUID CONTAINERS - PART 7: REQUIREMENTS AND TEST METHODS |
| UNI ISO 3534-2 : 2014 | STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS |
| EN ISO 11508:2017 | Soil quality - Determination of particle density (ISO 11508:2017) |
| UNI 10667-9 : 2011 | PLASTIC RAW-SECONDARY MATERIALS - POLYETHYLENTEREPHTALATE FLAKES FOR THE PRODUCTION OF SHEETS AND SHEETINGS, FROM THE RECYCLING OF POST-CONSUMER LIQUID CONTAINERS - PART 9: REQUIREMENTS AND TEST METHODS |
| ISO 21338:2010 | Water quality Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test) |
| EN ISO 8251:2011 | Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011) |
| ISO 11648-2:2001 | Statistical aspects of sampling from bulk materials — Part 2: Sampling of particulate materials |
| ISO 16742:2014 | Iron ores — Sampling of slurries |
| DIN EN ISO 14232-1:2016-02 (Draft) | THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017) |
| ISO 14849:1999 | Plastics Phenol-formaldehyde mouldings Determination of free ammonia and ammonium compounds Indophenol method |
| ISO 5796:2000 | Rubber compounding ingredients Natural calcium carbonate Test methods |
| BS EN 1269 : 1997 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOOR COVERINGS BY MEANS OF A SOILING TEST |
| ISO 4701:2017 | Iron ores and direct reduced iron Determination of size distribution by sieving |
| EN ISO 12956:2010 | Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:2010) |
| DIN EN 1067:2006-03 | Adhesives - Examination and preparation of samples for testing |
| DIN EN 12902:2005-02 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - INORGANIC SUPPORTING AND FILTERING MATERIALS - METHODS OF TEST |
| DIN EN 12948:2011-02 | Liming materials - Determination of size distribution by dry and wet sieving |
| DIN EN 1771:2004-11 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability using the sand column test |
| DIN EN 13785:2010-05 | REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| DIN EN 12274-7:2005-08 | SLURRY SURFACING - PART 7: SHAKING ABRASION TEST |
| DIN EN 13786:2010-07 | AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| DIN EN 993-2:1995-04 | METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 2: DETERMINATION OF TRUE DENSITY |
| DIN EN 13963:2014-09 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 1094-1:2008-09 | INSULATING REFRACTORY PRODUCTS - PART 1: TERMINOLOGY, CLASSIFICATION AND METHODS OF TEST FOR HIGH TEMPERATURE INSULATION WOOL PRODUCTS |
| DIN EN ISO 6427:2014-08 | PLASTICS - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) (ISO 6427:2013) |
| DIN EN 15346:2015-01 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| BS EN 1235:1995 | Solid fertilizers. Test sieving |
| ISO 1624:2001 | Plastics — Vinyl chloride homopolymer and copolymer resins — Sieve analysis in water |
| BS EN ISO 12086-2:2006 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
| ISO 14629:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of flowability of ceramic powders |
| BS EN 13108-2:2016 | Bituminous mixtures. Material specifications Asphalt Concrete for Very Thin Layers (BBTM) |
| BS EN 168:2002 | Personal eye-protection. Non-optical test methods |
| BS EN ISO 182-3 : 2001 | PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 3: CONDUCTOMETRIC METHOD |
| UNE-EN ISO 12677:2012 | Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011) |
| UNE-EN 1423:2013 | Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two |
| ISO 7711-3:2004 | Dentistry Diamond rotary instruments Part 3: Grit sizes, designation and colour code |
| BS EN 13938-2:2004 | Explosives for civil uses. Propellants and rocket propellants Determination of resistance to electrostatic energy |
| BS EN 14701-2:2013 | Characterisation of sludges. Filtration properties Determination of the specific resistance to filtration |
| BS EN ISO 8620:1996 | Plastics. Phenolic resin powder. Sieve analysis using air-jet sieve apparatus |
| ISO 3310-2:2013 | Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate |
| UNE-EN ISO 11127-2:2012 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2011) |
| BS EN 993-20:2004 | Methods of test for dense shaped refractory products Determination of resistance to abrasion at ambient temperature |
| BS EN 12956:1999 | Wallcoverings in roll form. Determination of dimensions, straightness, spongeability and washability |
| UNE-CEN/TS 14243:2012 EX | Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
| EN 933-2:1995 | Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures |
| EN 196-6:2010 | Methods of testing cement - Part 6: Determination of fineness |
| UNE-EN ISO 12956:2010 | Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:2010) |
| EN ISO 20541:2008 | Milk and milk products - Determination of nitrate content - Method by enzymatic reduction and molecular-absorption spectrometry after Griess reaction (ISO 20541:2008) |
| EN 13892-3:2014 | Methods of test for screed materials - Part 3: Determination of wear resistance - Böhme |
| EN ISO 1061:1999 | Plastics - Unplasticized cellulose acetate - Determination of free acidity (ISO 1061:1990) |
| EN ISO 1927-3:2012 | Monolithic (unshaped) refractory products - Part 3: Characterization as received (ISO 1927-3:2012) |
| UNI CEN/TS 14243 : 2010 | MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
| UNI EN 14701-2 : 2013 | CHARACTERISATION OF SLUDGES - FILTRATION PROPERTIES - PART 2: DETERMINATION OF THE SPECIFIC RESISTANCE TO FILTRATION |
| UNI EN 13139 : 2013 | AGGREGATES FOR MORTAR |
| UNI EN 13242 : 2013 | AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
| UNI EN 13036-1 : 2010 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 1: MEASUREMENT OF PAVEMENT SURFACE MACROTEXTURE DEPTH USING A VOLUMETRIC PATCH TECHNIQUE |
| UNI EN 12274-7 : 2005 | SLURRY SURFACING - TEST METHODS - PART 7: SHAKING ABRASION TEST |
| BS 5202-4:1992 | Methods for chemical analysis of tobacco and tobacco products Determination of alkaloid content (spectrometric method) |
| UNI EN ISO 20541 : 2009 | MILK AND MILK PRODUCTS - DETERMINATION OF NITRATE CONTENT - METHOD BY ENZYMATIC REDUCTION AND MOLECULAR-ABSORPTION SPECTROMETRY AFTER GRIESS REACTION |
| UNI EN ISO 3093 : 2010 | WHEAT, RYE AND THEIR FLOURS, DURUM WHEAT AND DURUM WHEAT SEMOLINA - DETERMINATION OF THE FALLING NUMBER ACCORDING TO HAGBERG-PERTEN |
| BS 5660-2:2001 | Methods of sampling iron ores Sampling and sample preparation procedures |
| UNI EN ISO 12677 : 2011 | CHEMICAL ANALYSIS OF REFRACTORY PRODUCTS BY X-RAY FLUORESCENCE (XRF) - FUSED CAST-BEAD METHOD |
| UNI EN 13279-2 : 2014 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 2: TEST METHODS |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNI EN 1094-1 : 2008 | INSULATING REFRACTORY PRODUCTS - PART 1: TERMINOLOGY, CLASSIFICATION AND METHODS OF TEST FOR HIGH TEMPERATURE INSULATION WOOL PRODUCTS |
| BS 6043-1.10:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch Determination of volatile matter content - Section 1.10 Determination of volatile matter content |
| UNI EN 13043 : 2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| UNI EN ISO 11337 : 2011 | PLASTICS - POLYAMIDES - DETERMINATION OF [EPSILON]-CAPROLACTAM AND [OMEGA]-LAUROLACTAME BY GAS CHROMATOGRAPHY |
| UNI EN 1429 : 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| I.S. EN 13043:2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| UNI EN 12948 : 2011 | LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING |
| UNI EN 12864 : 2010 | LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| UNI EN 1644-1 : 1997 | TEST METHODS FOR NONWOVEN COMPRESSES FOR MEDICAL USE - PART 1: NONWOVENS USED IN THE MANUFACTURE OF COMPRESSES |
| UNI EN 13963 : 2014 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS 6043-4.2:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes Determination of the effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution - Section 4.2 Determination of effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution |
| UNI EN 1423 : 2012 | ROAD MARKING MATERIALS - DROP ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO |
| UNI EN 1771 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF INJECTABILITY AND SPLITTING TEST |
| UNI EN 13786 : 2009 | AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| UNI EN ISO 6427 : 2014 | PLASTICS - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) |
| UNI EN 13785 : 2009 | REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| UNI EN 12620 : 2013 | AGGREGATES FOR CONCRETE |
| UNI EN ISO 12086-2 : 2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 16/30334728 DC : 0 | BS EN 1431 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| BS EN ISO 23145-2:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders Untapped density |
| DIN ISO 3310-2:2015-07 | TEST SIEVES - TECHNICAL REQUIREMENTS AND TESTING - PART 2: TEST SIEVES OF PERFORATED METAL PLATE (ISO 3310-2:2013) |
| BS 1796-1:1989 | Test sieving Methods using test sieves of woven wire cloth and perforated metal plate |
| UNI EN 16129 : 2013 | PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| BS ISO 423:1994 | Photography. Processing chemicals. Specification for hydroquinone |
| CR 12333:1996 | Fertilizers - Crushing strength determination on fertilizers grains |
| DIN EN 15428:2007-11 | Soil improvers and growing media - Determination of particle size distribution |
| DEFSTAN 03-21/2(1998) : 1998 | MECHANICAL METHODS FOR THE INDUCEMENT OF RESIDUAL SURFACE COMPRESSIVE STRESSES |
| UNI EN ISO 5529 : 2010 | WHEAT - DETERMINATION OF THE SEDIMENTATION INDEX - ZELENY TEST |
| DIN EN ISO 8251:2011-05 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - MEASUREMENT OF ABRASION RESISTANCE OF ANODIC OXIDATION COATINGS |
| BS ISO 3093 : 2004 AMD 17028 | WHEAT, RYE AND RESPECTIVE FLOURS, DURUM WHEAT AND DURUM WHEAT SEMOLINA - DETERMINATION OF THE FALLING NUMBER ACCORDING TO HAGBERG-PERTEN |
| BS ISO 5529 : 2007 | WHEAT - DETERMINATION OF THE SEDIMENTATION INDEX - ZELENY TEST |
| 08/30195061 DC : DRAFT DEC 2008 | BS EN ISO 1927-3 - UNSHAPED REFRACTORY MATERIALS - PART 3: CHARACTERIZATION AS RECEIVED |
| BS ISO 6732:2010 | Milk and milk products. Determination of iron content. Spectrometric method (Reference method) |
| I.S. EN 12373-10:1999 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 10: MEASUREMENT OF MEAN SPECIFIC ABRASION RESISTANCE OF ANODIC OXIDATION COATINGS USING AN ABRASIVE JET TEST APPARATUS |
| PD 6682-2:2003 | Aggregates Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas. Guidance on the use of BS EN 13043 |
| 09/30194950 DC : 0 | BS ISO 11337 - PLASTICS - POLYAMIDES - DETERMINATION OF E-CAPROLACTAM AND W-LAUROLACTAM BY GAS CHROMATOGRAPHY |
| BS ISO 14629 : 2012 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FLOWABILITY OF CERAMIC POWDERS |
| BS 5659-7:1987 | Methods of test for acid-grade fluorspar Determination of silica content |
| 14/30297859 DC : DRAFT AUG 2014 | BS EN 13892-3 - METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
| I.S. EN 993-20:2004 | METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 20: DETERMINATION OF RESISTANCE TO ABRASION AT AMBIENT TEMPERATURE |
| BS 2782-4.451E(1978) : 1978 AMD 10255 | METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF FREE PHENOLS IN PHENOL-FORMALDEHYDE MOULDINGS (IODOMETRIC METHOD) |
| BS ISO 12984:2018 | Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution |
| DIN ISO 3310-1:2001-09 | TEST SIEVES - TECHNICAL REQUIREMENTS AND TESTING - PART 1: TEST SIEVES OF METAL WIRE CLOTH (ISO 3310-1:2016) |
| UNI EN 15415-1 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES |
| 11/30212303 DC : 0 | BS ISO 23145-2 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 2: UNTAPPED DENSITY |
| 10/30233698 DC : 0 | BS EN 16179 - SLUDGE, TREATED BIOWASTE AND SOIL - GUIDANCE FOR SAMPLE PRETREATMENT |
| ISO 17531:2002 | Photography Processing chemicals Specifications for 4-(N-ethyl-N-2-methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate |
| BS ISO 9276-1:1998 | Representation of results of particle size analysis Graphical representation |
| ISO 1437:2017 | Rubber compounding ingredients — Carbon black — Determination of sieve residue |
| ISO 9022-6:2015 | Optics and photonics Environmental test methods Part 6: Dust |
| 08/30178800 DC : DRAFT MAY 2008 | BS EN 196-6 - METHODS OF TESTING CEMENT - PART 6: DETERMINATION OF FINENESS |
| 14/30272954 DC : 0 | BS ISO 18400-201 - SOIL QUALITY - SAMPLING - PART 201: PHYSICAL PRETREATMENT IN THE FIELD |
| 07/30147937 DC : 0 | BS ISO 4701 - IRON ORES AND DIRECT REDUCED IRON - DETERMINATION OF SIZE DISTRIBUTION BY SIEVING |
| BS ISO 17372 : 2008 | ANIMAL FEEDING STUFFS - DETERMINATION OF ZEARALENONE BY IMMUNOAFFINITY COLUMN CHROMATOGRAPHY AND HIGH PERFORMANCE LIQUID CHROMATOGRAPHY |
| 17/30365077 DC : 0 | BS EN 14243-3 - MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 3: SHREDS, CUTS AND CHIPS - METHODS FOR DETERMINING THEIR DIMENSION(S) INCLUDING PROTRUDING FILAMENTS DIMENSIONS |
| BS ISO 10835:2007 | Direct reduced iron and hot briquetted iron. Sampling and sample preparation |
| BS ISO 11323:2010 | Iron ore and direct reduced iron. Vocabulary |
| BS ISO 11916-1:2013 | Soil quality. Determination of selected explosives and related compounds Method using high-performance liquid chromatography (HPLC) with ultraviolet detection |
| BS 7276:1990 | Method for gas chromatographic analysis of liquefied petroleum gas |
| DIN EN 15348:2015-01 | Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates |
| BS 1016-110.2:1996 | Methods for analysis and testing of coal and coke. Size analysis of coke Nominal top size 20 mm or less |
| 10/30212476 DC : 0 | BS ISO 8332 - RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST |
| BS ISO 21869:2006 | Rubber compounding ingredients. Magnesium oxide. Methods of test |
| PREN 13139 : DRAFT 2015 | AGGREGATES FOR MORTAR |
| 14/30313332 DC : 0 | BS EN 16811-2 - WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 2: CALCIUM CHLORIDE AND MAGNESIUM CHLORIDE - REQUIREMENTS AND TEST METHODS |
| 12/30258609 DC : 0 | BS ISO 17758 - INSTANT DRIED MILK - DETERMINATION OF THE DISPERSIBILITY AND WETTABILITY |
| PREN 1269 : DRAFT 2013 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOOR COVERINGS BY MEANS OF A SOILING TEST |
| NF EN ISO 5529 : 2010 | WHEAT - DETERMINATION OF SEDIMENTATION INDEX - ZELENY TEST |
| PD ISO/TS 17758:2014 | Instant dried milk. Determination of the dispersibility and wettability |
| 10/30219716 DC : 0 | BS EN ISO 13501 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION |
| 17/30333965 DC : 0 | BS ISO 20977 - LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING |
| 08/30182897 DC : DRAFT MAY 2008 | BS ISO 1927-1 - UNSHAPED REFRACTORY MATERIALS - PART 1: INTRODUCTION AND CLASSIFICATION |
| DEFSTAN 03-21/3(2002) : 2002 | MECHANICAL METHODS FOR THE INDUCEMENT OF RESIDUAL SURFACE COMPRESSIVE STRESSES |
| BS ISO 1597 : 94 AMD 10720 | PLASTICS - UNPLASTICIZED CELLULOSE ACETATE - DETERMINATION OF ACETIC ACID YIELD |
| 12/30234141 DC | BS ISO 16349. Refractory materials. Determination of abrasion resistance at elevated temperature |
| BS PAS 100(2002) : 2002 | SPECIFICATION FOR COMPOSTED MATERIALS |
| BS 2782-5.553A(1991) : 1991 AMD 10600 | METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - DETERMINATION OF LIGHT ABSORPTION OF CELLULOSE ACETATE, BEFORE AND AFTER FURTHER HEATING |
| 09/30195571 DC : 0 | BS EN ISO 12677 - CHEMICAL ANALYSIS OF REFRACTORY PRODUCTS BY X-RAY FLUORESCENCE (XRF) - FUSED CAST-BEAD METHOD |
| NF ISO 8511 : 2011 | RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF PELLET SIZE DISTRIBUTION |
| BS ISO 13501 : 2005 AMD 16886 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION |
| BS 2782-4:Method 459A:1991 | Methods of testing plastics. Chemical properties Determination of free acidity in cellulose acetate |
| DD ENV 955-4:1997 | Chemical analysis of refractory products Products containing silica and/or alumina (Analysis by flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrography (ICP)) |
| BS ISO 6344-1:1998 | Coated abrasives. Grain size analysis Grain size distribution test |
| BS ISO 5796:2000 | Rubber compounding ingredients. Natural calcium carbonate. Test methods |
| UNI ISO 5794-1 : 2011 | RUBBER COMPOUNDING INGREDIENTS - SILICA, PRECIPITATED, HYDRATED - PART 1: NON-RUBBER TESTS |
| UNI EN 15415-2 : 2012 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES |
| PREN 1429 : DRAFT 2011 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| DIN EN ISO 1927-1:2012-11 | Monolithic (unshaped) refractory products - Part 1: Introduction and classification (ISO 1927-1:2012) |
| NFL 06 828 : B2004 | AEROSPACE INDUSTRY - BLAST MEDIA - WHITE ALUMINA |
| UNI ISO 11648-1 : 2008 | STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 1: GENERAL PRINCIPLES |
| ISO 8511:2011 | Rubber compounding ingredients Carbon black Determination of pellet size distribution |
| ISO 5543:2004 | Caseins and caseinates Determination of fat content Gravimetric method (Reference method) |
| CSA E60079.5 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - SAND-FILLED APPARATUS |
| UNE-CEN/TS 14972:2014 | Fixed firefighting systems - Watermist systems - Design and installation |
| BS 2000-91(2009) : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| BS ISO 12086-2 : 2001 AMD 10637 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS |
| ISO/TS 17758:2014 | Instant dried milk Determination of the dispersibility and wettability |
| PREN 13043 : DRAFT 2015 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| S.R. CEN/TR 16443:2013 | BACKGROUNDS TO THE REVISION OF EN 450-1:2005+A1:2007 - FLY ASH FOR CONCRETE |
| ISO 22498:2005 | Plastics — Vinyl chloride homopolymer and copolymer resins — Particle size determination by mechanical sieving |
| UNI CEN ISO/TS 17892-4 : 2005 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| S.R. CEN/TS 16011:2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| I.S. EN ISO 23145-2:2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 2: UNTAPPED DENSITY (ISO 23145-2:2012) |
| I.S. EN 15428:2007 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| I.S. EN ISO 23145-1:2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 1: TAP DENSITY (ISO 23145-1:2007) |
| ISO 6668:2008 | Green coffee — Preparation of samples for use in sensory analysis |
| S.R. 24:2004 | GUIDANCE ON THE USE AND APPLICATION OF EUROPEAN TEST METHOD STANDARDS FOR AGGREGATES |
| BS 1248-1:1990 | Wallcoverings in roll form Terms and symbols |
| BS ISO 10844:2014 | Acoustics. Specification of test tracks for measuring noise emitted by road vehicles and their tyres |
| ISO 6783:1982 | Coarse aggregates for concrete Determination of particle density and water absorption Hydrostatic balance method |
| ISO 12984:2018 | Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of particle size distribution |
| UNE-EN ISO 8130-1:2011 | Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992) |
| NF EN ISO 8130-1 : 2011 | COATING POWDERS - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING |
| 17/30365074 DC : 0 | BS EN 14243-2 - MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 2: GRANULATES AND POWDERS - METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES, INCLUDING FREE STEEL AND FREE TEXTILE CONTENT |
| ISO 12977:1999 | Carbonaceous materials for use in the production of aluminium — Pitch for electrodes — Determination of volatile matter content |
| I.S. EN ISO 14629:2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FLOWABILITY OF CERAMIC POWDERS (ISO 14629:2012) |
| PREN 13242 : DRAFT 2015 | AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| ISO 11916-1:2013 | Soil quality — Determination of selected explosives and related compounds — Part 1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection |
| EN ISO 11125-2:1997 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993) |
| ISO 12956:2010 | Geotextiles and geotextile-related products Determination of the characteristic opening size |
| S.R. CR 12333:1996 | FERTILIZERS - CRUSHING STRENGTH DETERMINATION ON FERTILIZERS GRAINS |
| ISO 719:1985 | Glass Hydrolytic resistance of glass grains at 98 degrees C Method of test and classification |
| I.S. CWA 14243:2002 | POST-CONSUMER TYRE MATERIALS AND APPLICATIONS |
| I.S. EN 4637:2010 | AEROSPACE SERIES - BLAST MEDIA - WHITE CORUNDUM |
| S.R. 16:2016 | GUIDANCE ON THE USE OF I.S. EN 12620:2002+A1:2008 - AGGREGATES FOR CONCRETE |
| DIN EN 451-2:2015-07 (Draft) | METHOD OF TESTING FLY ASH - PART 2: DETERMINATION OF FINENESS BY WET SIEVING |
| DIN EN 451-1:2015-07 (Draft) | METHOD OF TESTING FLY ASH - PART 1: DETERMINATION OF FREE CALCIUM OXIDE CONTENT |
| DIN EN ISO 12677:2013-02 | Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011) |
| DIN EN ISO 3093:2010-05 | Wheat, rye and their flours, durum wheat and durum wheat semolina - Determination of the falling number according to Hagberg-Perten (ISO 3093:2009) |
| BS EN 12274-7:2005 | Slurry surfacing. Test methods Shaking abrasion test |
| ISO 787-7:2009 | General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual procedure |
| ISO 20541:2008 | Milk and milk products — Determination of nitrate content — Method by enzymatic reduction and molecular-absorption spectrometry after Griess reaction |
| ISO 182-4:1993 | Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 4: Potentiometric method |
| ISO 120:1977 | Plastics Phenol-formaldehyde mouldings Determination of free ammonia and ammonium compounds Colorimetric comparison method |
| BS EN ISO 1599:1999 | Plastics. Cellulose acetate. Determination of viscosity loss on moulding |
| BS EN 725-9:2006 | Advanced technical ceramics. Methods of test for ceramic powders Determination of untapped bulk density |
| ISO/TS 17892-4:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 4: Determination of particle size distribution |
| BS EN ISO 7711-3:2004 | Dentistry. Diamond rotary instruments Grit sizes, designation and colour code |
| BS EN ISO 11127-2:2011 | Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives Determination of particle size distribution |
| BS EN 451-2:2017 | Method of testing fly ash Determination of fineness by wet sieving |
| BS EN 24497:1993 | Metallic powders. Determination of particle size by dry sieving |
| ISO 182-3:1993 | Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 3: Conductometric method |
| BS EN ISO 4610:2001 | Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis using air-jet sieve apparatus |
| BS EN 12620:2013 | Aggregates for concrete |
| ISO 787-11:1981 | General methods of test for pigments and extenders — Part 11: Determination of tamped volume and apparent density after tamping |
| ISO 4934:2003 | Steel and iron Determination of sulfur content Gravimetric method |
| BS EN 13963:2014 | Jointing materials for gypsum boards. Definitions, requirements and test methods |
| UNE-EN 13963:2014 | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| BS EN ISO 20567-1:2017 | Paints and varnishes. Determination of stone-chip resistance of coatings Multi-impact testing |
| BS EN ISO 4934:2003 | Steel and iron. Determination of sulfur content. Gravimetric method |
| ISO 1598:1990 | Plastics - Cellulose acetate — Determination of insoluble particles |
| 13/30291099 DC : 0 | BS EN 15002 - CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
| BS EN ISO 1598:2000 | Plastics. Cellulose acetate. Determination of insoluble particles |
| BS EN 993-17:1999 | Methods of test for dense shaped refractory products Determination of bulk density of granular materials by the mercury method with vacuum |
| UNE-EN 14701-2:2013 | Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration |
| ISO 23145-1:2007 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic powders — Part 1: Tap density |
| UNE-EN ISO 6427:2015 | Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013) |
| ISO 14244:2014 | Oilseed meals — Determination of soluble proteins in potassium hydroxide solution |
| BS EN 13139:2013 | Aggregates for mortar |
| ISO 20568-2:2017 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 4610:2001 | Plastics Vinyl chloride homopolymer and copolymer resins Sieve analysis using air-jet sieve apparatus |
| ISO 5529:2007 | Wheat — Determination of the sedimentation index — Zeleny test |
| ISO 14232-1:2017 | Thermal spraying — Powders — Part 1: Characterization and technical supply conditions |
| BS EN 1402-3:2003 | Unshaped refractory products Characterization as received |
| ISO 4497:1983 | Metallic powders Determination of particle size by dry sieving |
| ISO 12677:2011 | Chemical analysis of refractory products by X-ray fluorescence (XRF) Fused cast-bead method |
| BS EN 1274:2004 | Thermal spraying. Powders. Composition, technical supply conditions |
| ISO 6427:2013 | Plastics — Determination of matter extractable by organic solvents (conventional methods) |
| ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
| ISO 12086-2:2006 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN 1429:2013 | Bitumen and bituminous binders. Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| ISO 20567-1:2017 | Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing |
| BS EN 12864 : 2001 | LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| ISO 14673-1:2004 | Milk and milk products — Determination of nitrate and nitrite contents — Part 1: Method using cadmium reduction and spectrometry |
| ISO 7941:1988 | Commercial propane and butane Analysis by gas chromatography |
| ISO 1927-3:2012 | Monolithic (unshaped) refractory products — Part 3: Characterization as received |
| ISO 11337:2010 | Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography |
| ISO 119:1977 | Plastics Phenol-formaldehyde mouldings Determination of free phenols Iodometric method |
| ISO 16282:2007 | Methods of test for dense shaped refractory products Determination of resistance to abrasion at ambient temperature |
| BS EN 13892-3:2014 | Methods of test for screed materials Determination of wear resistance. Böhme |
| ISO 13501:2011 | Petroleum and natural gas industries Drilling fluids Processing equipment evaluation |
| ISO 3549:1995 | Zinc dust pigments for paints — Specifications and test methods |
| BS EN ISO 3093:2009 | Wheat, rye and their flours, durum wheat and durum wheat semolina. Determination of the falling number according to Hagberg-Perten |
| ISO 1061:1990 | Plastics Unplasticized cellulose acetate Determination of free acidity |
| BS EN 13040:2007 | Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| BS EN ISO 14673-1:2004 | Milk and milk products. Determination of nitrate and nitrite contents Method using cadmium reduction and spectrometry |
| ISO 9073-6:2000 | Textiles — Test methods for nonwovens — Part 6: Absorption |
| BS EN 1771:2004 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of injectability and splitting test |
| BS EN 12948:2010 | Liming materials. Determination of size distribution by dry and wet sieving |
| BS EN ISO 1624:2002 | Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis in water |
| UNE-CEN/TS 16011:2015 EX | Plastics - Recycled plastics - Sample preparation |
| DIN EN 15002:2015-07 | CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
| ISO 3093:2009 | Wheat, rye and their flours, durum wheat and durum wheat semolina — Determination of the falling number according to Hagberg-Perten |
| DIN EN ISO 8130-1:2011-02 | COATING POWDERS - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING |
| EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
| ENV 1402-1 : 1994 | UNSHAPED REFRACTORY PRODUCTS - INTRODUCTION AND DEFINITIONS |
| EN ISO 3549:2002 | Zinc dust pigments for paints - Specifications and test methods (ISO 3549:1995) |
| EN ISO 23145-2:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012) |
| EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
| EN 16811-1:2016 | Winter service equipment and products - De-icing agents - Part 1: Sodium chloride - Requirements and test methods |
| EN ISO 12677:2011 | Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011) |
| EN 24497:1993 | Metallic powders - Determination of particle size by dry sieving (ISO 4497:1983) |
| EN ISO 16282:2008 | Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature (ISO 16282:2007) |
| EN ISO 1598:1999 | Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990) |
| EN 13786:2004+A1:2008 | Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures |
| EN ISO 787-7:2009 | General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009) |
| EN ISO 1624:2001 | Plastics - Vinyl choride homopolymer and copolymer resins - Sieve analysis in water (ISO 1624:2001) |
| EN 12948:2010 | Liming materials - Determination of size distribution by dry and wet sieving |
| EN 1402-3:2003 | Unshaped refractory products - Part 3: Characterization as received |
| EN ISO 9073-6:2003 | Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000) |
| EN 13785:2005+A1:2008 | Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures |
| EN ISO 787-10:1995 | General methods of test for pigments and extenders - Part 10: Determination of density - Pycnometer method (ISO 787-10:1993) |
| EN 15415-2:2012 | Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles |
| EN ISO 7711-3:2004 | Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:2004) |
| EN ISO 119:1998 | Plastics - Phenol-formaldehyde mouldings - Determination of free phenols - Iodometric method (ISO 119:1977) |
| EN 16179:2012 | Sludge, treated biowaste and soil - Guidance for sample pretreatment |
| EN 12373-10:1998 | Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
| EN ISO 14629:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders (ISO 14629:2012) |
| EN 15428:2007 | Soil improvers and growing media - Determination of particle size distribution |
| EN ISO 4610:2001 | Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001) |
| EN 14701-2:2013 | Characterisation of sludges - Filtration properties - Part 2: Determination of the specific resistance to filtration |
| EN ISO 182-3:2000 | Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993) |
| EN 993-18:2002 | Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum |
| EN ISO 787-18:1995 | General methods of test for pigments and extenders - Part 18: Determination of residue on sieve - Mechanical flushing procedure (ISO 787-18:1983) |
| EN ISO 14673-1:2004 | Milk and milk products - Determination of nitrate and nitrite contents - Part 1: Method using cadmium reduction and spectrometry (ISO 14673-1:2004) |
| EN 13963:2014 | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| EN ISO/TS 17892-4 : 2004 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| EN 451-2:2017 | Method of testing fly ash - Part 2: Determination of fineness by wet sieving |
| EN 4638:2010 | Aerospace series - Blast media - Brown corundum, without iron |
| EN ISO 13501:2011 | Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation (ISO 13501:2011) |
| EN ISO 5529:2010 | Wheat - Determination of the sedimentation index - Zeleny test (ISO 5529:2007) |
| EN 16811-2:2016 | Winter service equipment and products - De-icing agents - Part 2: Calcium chloride and Magnesium chloride - Requirements and test methods |
| EN 20340 : 1993 | CONVEYOR BELTS - FLAME RETARDATION - SPECIFICATIONS AND TEST METHOD |
| EN ISO 182-2:1999 | Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 2: pH method (ISO 182-2:1990) |
| EN 15415-3:2012 | Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles |
| EN ISO 20568-2:2017 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) |
| EN ISO 20567-1:2017 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2017) |
| EN 4637:2010 | Aerospace series - Blast media - White corundum |
| EN 15348:2014 | Plastics - Recycled plastics - Characterization of poly(ethylene terephthalate) (PET) recyclates |
| EN ISO 4934:2003 | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
| EN ISO 8620 : 1995 | PLASTICS - PHENOLIC RESIN POWDER - SIEVE ANALYSIS USING AIR-JET SIEVE APPARATUS |
| EN ISO 787-11:1995 | General methods of test for pigments and extenders - Part 11: Determination of tamped volume and apparent density after tamping (ISO 787-11:1981) |
| EN 168:2001 | Personal eye-protection - Non-optical test methods |
| EN ISO 1600:1999 | Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990) |
| EN ISO 1597 : 1999 | PLASTICS - UNPLASTICIZED CELLULOSE ACETATE - DETERMINATION OF ACETIC ACID YIELD |
| EN ISO 6427:2014 | Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013) |
| EN ISO 23145-1:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007) |
| EN 993-16:1995 | Dense shaped refractory products - Methods of test - Part 16: Determination of resistance to sulphuric acid |
| EN ISO 11337:2010 | Plastics - Polyamides - Determination of e-caprolactam and w-laurolactam by gas chromatography (ISO 11337:2010) |
| EN ISO 120:1998 | Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method (ISO 120:1977) |
| EN ISO 14244:2016 | Oilseed meals - Determination of soluble proteins in potassium hydroxide solution (ISO 14244:2014) |
| EN 1429:2013 | Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| EN 451-1:2017 | Method of testing fly ash - Part 1: Determination of free calcium oxide content |
| EN ISO 151999 : 1999 | PLASTICS - CELLULOSE ACETATE - DETERMINATION OF VISCOSITY LOSS ON MOULDING |
| EN 1402-1:2003 | Unshaped refractory products - Part 1: Introduction and classification |
| EN 725-9:2006 | Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density |
| EN 1644-1:1997 | Test methods for nonwoven compresses for medical use - Part 1: Nonwovens used in the manufacture of compresses |
| EN 993-12:1997 | Methods of test for dense shaped refractory products - Part 12: Determination of pyrometric cone equivalent (refractoriness) |
| EN 13938-2:2004 | Explosives for civil uses - Propellants and rocket propellants - Part 2: Determination of resistance to electrostatic energy |
| EN 993-20:2004 | Methods of test for dense shaped refractory products - Part 20: Determination of resistance to abrasion at ambient temperature |
| EN ISO 3093:2009 | Wheat, rye and their flours, durum wheat and durum wheat semolina - Determination of the falling number according to Hagberg-Perten (ISO 3093:2009) |
| EN 993-17:1998 | Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum |
| EN 725-8:2006 | Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density |
| EN 15346:2014 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| EN ISO 182-4:2000 | Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO 182-4:1993) |
| ISO 12979:1999 | Carbonaceous materials for use in the production of aluminium — Pitch for electrodes — Determination of C/H ratio in the quinoline-insoluble fraction |
| 06/30116943 DC : 0 | EN 13040 - SOIL IMPROVERS AND GROWING MEDIA - SAMPLE PREPARATION FOR CHEMICAL AND PHYSICAL TESTS, DETERMINATION OF DRY MATTER CONTENT, MOISTURE CONTENT AND LABORATORY COMPACTED BULK DENSITY |
| UNI EN ISO 16282 : 2008 | METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - DETERMINATION OF RESISTANCE TO ABRASION AT AMBIENT TEMPERATURE |
| DIN EN 1431:2016-03 (Draft) | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| DIN ISO 5018:1989-10 | REFRACTORY MATERIALS - DETERMINATION OF TRUE DENSITY |
| 10/30230003 DC : 0 | BS EN 15415-2 - SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES |
| UNI EN 993-2 : 2008 | METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 2: DETERMINATION OF TRUE DENSITY |
| BS ISO 3299:1994 | Photography. Processing chemicals. Specifications for 1-phenyl-3-pyrazolidinone |
| PD CEN/TS 16811-3:2015 | Winter maintenance equipment. De-icing agents Other solid and liquid de-icing agents. Requirements and test methods |
| NF EN ISO 23145-1 : 2016 | FIRE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 1: TAP DENSITY |
| I.S. EN 1274:2004 | THERMAL SPRAYING - POWDERS - COMPOSITION - TECHNICAL SUPPLY CONDITIONS |
| 05/30124598 DC : 0 | EN 1094-9 - INSULATING REFRACTORY PRODUCTS - PART 9: METHODS OF TEST FOR ALKALINE EARTH SILICATE (AES) WOOL PRODUCTS |
| I.S. EN ISO 4934:2004 | STEEL AND IRON - DETERMINATION OF SULFUR CONTENT - GRAVIMETRIC METHOD |
| BS 2782-4.480A(1991) : 1991 AMD 10721 | METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF INSOLUBLE PARTICLES IN CELLULOSE ACETATE |
| 97/402028 DC : DRAFT FEB 1997 | BS ISO 11648-0 - STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIAL - PART 0: GENERAL INTRODUCTION |
| 14/30313329 DC : 0 | BS EN 16811-1 - WINTER SERVICE EQUIPMENT - DE-ICING AGENTS - PART 1: SODIUM CHLORIDE - REQUIREMENTS AND TEST METHODS |
| UNE-ISO 3534-2:2013 | Statistics -- Vocabulary and symbols -- Part 2: Applied statistics |
| IP 91 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, AND DETERMINATION OF STORAGE STABILITY BY SIEVING |
| BS ISO 18400-201:2017 | Soil quality. Sampling Physical pretreatment in the field |
| BS EN 15415-1:2011 | Solid recovered fuels. Determination of particle size distribution Screen method for small dimension particles |
| UNE-EN ISO 20568-2:2017 | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) |
| ISO 4020:2001 | Road vehicles — Fuel filters for diesel engines — Test methods |
| BS ISO 6668:2008 | Green coffee. Preparation of samples for use in sensory analysis |
| 08/30142156 DC : 0 | BS 5834-1:2009 - SURFACE BOXES, GUARDS AND UNDERGROUND CHAMBERS FOR UTILITIES PURPOSES - PART 1: SPECIFICATION FOR GUARDS AND PLINTHS |
| DIN ISO 11508 E : 2002 | SOIL QUALITY - DETERMINATION OF PARTICLE DENSITY |
| 13/30276234 DC : 0 | BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| 07/30168642 DC : 0 | BS EN 168 - PERSONAL EYE-PROTECTION - NON-OPTICAL TEST METHODS |
| UNE-EN 15346:2015 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| DD ENV 1402-3:1999 | Unshaped refractory products Characterization as received |
| BS ISO 5543:2004 | Caseins and caseinates. Determination of fat content. Gravimetric method (reference method) |
| ISO 11916-2:2013 | Soil quality — Determination of selected explosives and related compounds — Part 2: Method using gas chromatography (GC) with electron capture detection (ECD) or mass spectrometric detection (MS) |
| BS EN 10298:2005 | Steel tubes and fittings for onshore and offshore pipelines. Internal lining with cement mortar |
| 09/30202313 DC : 0 | BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
| PREN 13892-3 : DRAFT 2014 | METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
| 09/30186154 DC : 0 | BS ISO 11323 - IRON ORE AND DIRECT REDUCED IRON - VOCABULARY |
| BS ISO 3728:2004 | Ice-cream and milk ice. Determination of total solids content (reference method) |
| BS EN 4638:2010 | Aerospace series. Blast media. Brown corundum, without iron |
| 06/30145502 DC : 0 | EN 4638 - AEROSPACE SERIES - BLAST MEDIA - BROWN CORUNDUM |
| BS EN ISO 787-7:2009 | General methods of test for pigments and extenders Determination of residue on sieve. Water method. Manual procedure |
| DIN EN 16129:2013-08 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| BIS IS 16143-1 : 2014 | HARD COAL AND COKE - MECHANICAL SAMPLING - PART 1: GENERAL INTRODUCTION |
| BS ISO 8942:2010 | Rubber compounding ingredients. Carbon black. Determination of individual pellet crushing strength |
| BS 410-1:2000 | Test sieves. Technical requirements and testing Test sieves of metal wire cloth |
| ISO 5446:2017 | Ferromanganese — Specification and conditions of delivery |
| DIN EN 16179:2012-11 | Sludge, treated biowaste and soil - Guidance for sample pretreatment |
| BIS IS 1528-9 : 2007 | METHODS OF SAMPLING AND PHYSICAL TESTS FOR REFRACTORY MATERIALS - PART 9: DETERMINATION OF TRUE DENSITY |
| I.S. EN ISO 8130-1:2010 | COATING POWDERS - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING |
| BS ISO 622:2016 | Solid mineral fuels. Determination of phosphorus content. Reduced molybdophosphate photometric method |
| DIN ISO 10844:2016-09 | Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres (ISO 10844:2014) |
| BS EN ISO 20568-2:2017 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
| 10/30230006 DC : 0 | BS EN 15415-3 - SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES |
| BS EN 16811-2:2016 | Winter service equipment and products. De-icing agents Calcium chloride and Magnesium chloride. Requirements and test methods |
| BS EN 50017:1998 | Electrical apparatus for potentially explosive atmospheres. Powder filling \'q\' |
| 13/30284235 DC : 0 | BS EN 1269 - TEXTILE FLOOR COVERINGS - ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOOR COVERINGS BY MEANS OF A SOILING TEST |
| 16/30299337 DC : 0 | BS ISO 5446 - FERROMANGANESE - SPECIFICATION AND CONDITIONS OF DELIVERY |
| 17/30355140 DC : 0 | BS ISO 8332 - RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST |
| 08/30184621 DC : DRAFT SEP 2008 | BS EN 1423 - ROAD MARKING MATERIALS - DROPS ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO |
| BS 7825-3.7:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Rheological properties |
| PREN 15346 : DRAFT 2013 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| 04/30116791 DC : DRAFT JUL 2004 | BS EN 15002 - CHARACTERISATION OF WASTE - PREPARATION OF TEST PORTIONS FROM LABORATORY SAMPLE |
| 02/103376 DC : DRAFT MAY 2002 | PREN 13108-2 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: ASPHALT CONCRETE FOR VERY THIN LAYERS |
| BS 5705-6:1981 | Methods of test for sodium hexafluorosilicate for industrial use Determination of particle size distribution by sieving |
| UNE-EN ISO 14232-1:2017 | Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017) |
| 04/30091870 DC : DRAFT FEB 2004 | BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 50281-2-1:1999 | Electrical apparatus for use in the presence of combustible dust. Test methods Methods of determining minimum ignition temperatures |
| CSA E60079.5 : 2002 : R2011 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - SAND-FILLED APPARATUS |
| BS 2782-4.451D(1978) : 1978 AMD 10254 | METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF FREE AMMONIA AND AMMONIUM COMPOUNDS IN PHENOL-FORMALDEHYDE MOULDINGS (COLORIMETRIC COMPARISON METHOD) |
| I.S. EN ISO 14604:2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF FRACTURE STRAIN (ISO 14604:2012) |
| I.S. EN ISO 16282:2008 | METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - DETERMINATION OF RESISTANCE TO ABRASION AT AMBIENT TEMPERATURE |
| DIN ISO 9022-6:2015-08 | OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 6: DUST (ISO 9022-6:2015) |
| XP CEN/TS 16305 : 2012 XP | LIMING MATERIALS - DETERMINATION OF THE DUST CONTENT OF GRANULAR LIMING MATERIALS BEFORE AND AFTER SIMULATED HANDLING CONDITIONS |
| NFL 06 829 : A2004 | AEROSPACE INDUSTRY - BLAST MEDIA - ALUMINIUM OXIDE |
| DIN EN 15415-2:2012-06 | Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles |
| PREN 4637 : 200P1 | AEROSPACE SERIES - BLAST MEDIA - WHITE CORUNDUM |
| I.S. EN 15415-1:2011 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES |
| I.S. EN 16179:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - GUIDANCE FOR SAMPLE PRETREATMENT |
| API RP 13C : 2014 | RECOMMENDED PRACTICE ON DRILLING FLUID PROCESSING SYSTEMS EVALUATION |
| S.R. 17:2004 | GUIDANCE ON THE USE OF I.S. EN 13043:2002 - AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| I.S. EN 196-6:2010 | METHODS OF TESTING CEMENT - PART 6: DETERMINATION OF FINENESS |
| BIS IS 2303-1-2 : 2012(R2017) | GRADING GLASS - PART 1: METHOD OF TEST AND CLASSIFICATION - SECTION 2: HYDROLYTIC RESISTANCE OF GLASS GRAINS AT 121 DEGREES C |
| UNI EN 15415-3 : 2012 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES |
| BS ISO 8332:2011 | Rubber compounding ingredients. Sulfur. Methods of test |
| ISO 622:2016 | Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method |
| ISO 11464:2006 | Soil quality Pretreatment of samples for physico-chemical analysis |
| I.S. EN 16129:2013 | PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| UNI 10667-13 : 2013 | PLASTIC RAW-SECONDARY MATERIALS FILLERS OBTAINED FROM GRINDING OF PRODUCTION AND/OR POST-CONSUMER WASTE OF REINFORCED PLASTICS COMPOSITES - PART 13: REQUIREMENTS AND TEST METHODS |
| UNI 10667-6 : 2011 | PLASTIC RAW-SECONDARY MATERIALS - UNPLASTICIZED POLY(VINYLCHLORIDE) FOR GENERAL PURPOSES FROM THE RECYCLING OF INDUSTRIAL RESIDUES AND/OR FROM RIGID NOT PLASTICIZED ITEMS FROM PRE AND/OR POST CONSUMER - PART 6: REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 8251 : 2011 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - MEASUREMENT OF ABRASION RESISTANCE OF ANODIC OXIDATION COATINGS |
| ISO 20481:2008 | Coffee and coffee products — Determination of the caffeine content using high performance liquid chromatography (HPLC) — Reference method |
| NF ISO 8332 : 2012 | RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST |
| BS ISO 1997:1992 | Granulated cork and cork powder. Classification, properties and packing |
| 17/30353403 DC : 0 | BS EN 17097 - GEOSYNTHETICS - CHARACTERISTICS REQUIRED FOR USE IN SURFACE EROSION CONTROL ON SLOPES AND BANKS |
| I.S. EN ISO 1927-1:2012 | MONOLITHIC (UNSHAPED) REFRACTORY PRODUCTS - PART 1: INTRODUCTION AND CLASSIFICATION (ISO 1927-1:2012) |
| DIN EN 13285:2010-12 | UNBOUND MIXTURES - SPECIFICATIONS |
| ISO 423:1994 | Photography Processing chemicals Specifications for hydroquinone |
| PREN 14243-2 : DRAFT 2017 | MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 2: GRANULATES AND POWDERS - METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES, INCLUDING FREE STEEL AND FREE TEXTILE CONTENT |
| BS EN ISO 8130-1:2010 | Coating powders Determination of particle size distribution by sieving |
| IP 458 : 2009 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMEN EMULSIONS BY DISTILLATION |
| NF EN ISO 787-7 : 2009 | GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 7: DETERMINATION OF RESIDUE ON SIEVE - WATER METHOD - MANUAL PROCEDURE |
| ISO 5256:1985 | Steel pipes and fittings for buried or submerged pipe lines External and internal coating by bitumen or coal tar derived materials |
| ISO 13909-1:2016 | Hard coal and coke — Mechanical sampling — Part 1: General introduction |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| S.R. 18:2006 | GUIDANCE ON THE USE OF I.S. EN 13139:2002 - AGGREGATES FOR MORTAR |
| ISO 13765-5:2004 | Refractory mortars — Part 5: Determination of grain size distribution (sieve analysis) |
| IEC 61241-2-1:1994 | Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 1: Methods for determining the minimum ignition temperatures of dust |
| ISO/TS 14423:1999 | Carbonaceous materials used in the production of aluminium Cold-ramming pastes Determination of effective binder content and aggregate content by extraction with quinoline, and determination of aggregate size distribution |
| I.S. EN ISO 20541:2008 | MILK AND MILK PRODUCTS - DETERMINATION OF NITRATE CONTENT - METHOD BY ENZYMATIC REDUCTION AND MOLECULAR-ABSORPTION SPECTROMETRY AFTER GRIESS REACTION |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| ISO 8620:1986 | Plastics Phenolic resin powder Sieve analysis using air-jet sieve apparatus |
| BS EN 14497:2004 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of the filtration stability |
| BS EN 1402-1:2003 | Unshaped refractory products Introduction and classification |
| BS EN 1644-1:1997 | Test methods for nonwoven compresses for medical use Nonwovens used in the manufacture of compresses |
| ISO 182-2:1990 | Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 2: pH method |
| BS EN 13043:2013 | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
| BS EN 12280-1:1998 | Rubber- or plastics-coated fabrics. Accelerated ageing tests Heat ageing |
| BS EN 20340:1993 | Conveyor belts. Flame retardation. Specifications and test method |
| ISO 1597:1994 | Plastics Unplasticized cellulose acetate Determination of acetic acid yield |
| ISO 11127-2:2011 | Preparation of steel substrates before application of paints and related products Test methods for non-metallic blast-cleaning abrasives Part 2: Determination of particle size distribution |
| BS EN 993-2:1995 | Methods of test for dense shaped refractory products Determination of true density |
| BS EN 12373-10:1999 | Aluminium and aluminium alloys. Anodizing Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
| BS EN 15002:2015 | Characterization of waste. Preparation of test portions from the laboratory sample |
| BS EN 15346:2014 | Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates |
| BS EN ISO 11337:2010 | Plastics. Polyamides. Determination of e-caprolactam and w-laurolactam by gas chromatography |
| BS EN ISO 9073-6:2003 | Textiles. Test methods for nonwovens Absorption |
| BS EN 27941:1994 | Methods of test for petroleum and its products. Commercial propane and butane. Analysis by gas chromatography |
| EN 12192-1:2002 | Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar |
| CEN/TS 16011:2013 | Plastics - Recycled plastics - Sample preparation |
| EN 13040:2007 | Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
| BS 5834-1:2017 | Surface boxes, guards and underground chambers for the purposes of utilities Specification for guards and plinths |
| NF EN ISO 12956 : 2010 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE CHARACTERISTIC OPENING SIZE |
| DIN EN ISO 4934:2004-05 | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
| CEN/TS 16305:2012 | Liming materials - Determination of the dust content of granular liming materials before and after simulated handling conditions |
| EN 61241-2-2:1995 | Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers |
| DIN ISO 11277:2002-08 | Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation (ISO 11277:1998 + Corr 1:2002) |
| DIN EN ISO 12086-2:2006-05 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 10298:2005 | Steel tubes and fittings for on shore and offshore pipelines - Internal lining with cement mortar |
| EN 50281-2-1 : 98 COR 99 | Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust |
| EN 13242:2002+A1:2007 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
| EN 12280-1:1997 | Rubber- or plastics- coated fabrics - Accelerated ageing tests - Part 1: Heat ageing |
| EN 12902:2004 | Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Methods of test |
| DIN EN ISO 12956:2010-08 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE CHARACTERISTIC OPENING SIZE |
| EN 1094-1:2008 | Insulating refractory products - Part 1: Terminology, classification and methods of test for high temperature insulation wool products |
| DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08 | WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 4610:2002-04 | PLASTICS - VINYL CHLORIDE HOMOPOLYMER AND COPOLYMER RESINS - SIEVE ANALYSIS USING AIR-JET SIEVE APPARATUS |
| CEN/TS 15415:2006 | Solid recovered fuels - Determination of particle size distribution by screen method |
| DIN EN 10298:2005-12 | Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar |
| DIN EN ISO 14673-1:2004-05 | Milk and milk products - Determination of nitrate and nitrite contents - Part 1: Method using cadmium reduction and spectrometry (ISO 14673-1:2004) |
| DIN ISO 11508:2002-05 | SOIL QUALITY - DETERMINATION OF PARTICLE DENSITY |
| DIN ISO 1435:2004-08 | RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK (PELLETIZED) - DETERMINATION OF FINES CONTENT |
| EN 1067:2005 | Adhesives - Examination and preparation of samples for testing |
| I.S. EN ISO 7711-3:2004 | DENTISTRY - DIAMOND ROTARY INSTRUMENTS - PART 3: GRIT SIZES, DESIGNATION AND COLOUR CODE |
| EN 50017:1998 | Electrical apparatus for potentially explosive atmospheres - Powder filling "q" |
| BS 2782-1.130B(1991) : 1991 AMD 10685 | METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE THERMAL STABILITY OF POLYVINYL CHLORIDE BY THE pH METHOD |
| ONORM EN 15346 : 2014 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| BS 3900-A2(1993) : 1993 AMD 8331 | METHODS OF TEST FOR PAINTS - EXAMINATION AND PREPARATION OF SAMPLES FOR TESTING |
| BS 3900-A2:1983 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Examination and preparation of samples for testing |
| ONORM EN 15348 : 2014 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES |
| I.S. EN ISO 3549:2002 | ZINC DUST PIGMENTS FOR PAINTS - SPECIFICATIONS AND TEST METHODS |
| ISO 2395:1990 | Test sieves and test sieving — Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.