ISO 5577:2017
Current
Current
The latest, up-to-date edition.
Non-destructive testing — Ultrasonic testing — Vocabulary
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
27-01-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 5577:2017 defines the terms used in ultrasonic non-destructive testing and forms a common basis for standards and general use. This document does not cover terms used in ultrasonic testing with phased arrays.
NOTE Terms for phased array ultrasonic testing are defined in EN 16018.
| DevelopmentNote |
Supersedes ISO/DIS 5577. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 5577 E : 2017 | Identical |
| NF EN ISO 5577 : 2017 | Identical |
| NEN EN ISO 5577 : 2017 | Identical |
| NS EN ISO 5577 : 2017 | Identical |
| I.S. EN ISO 5577:2017 | Identical |
| PN EN ISO 5577 : 2017 | Identical |
| SN EN ISO 5577:2017 | Identical |
| UNI EN ISO 5577 : 2017 | Identical |
| SS-EN ISO 5577:2017 | Identical |
| UNE-EN ISO 5577:2017 | Identical |
| BS EN ISO 5577:2017 | Identical |
| EN ISO 5577:2017 | Identical |
| DIN EN ISO 5577:2015-06 (Draft) | Identical |
| DIN EN ISO 5577:2017-05 | Identical |
| GOST R ISO 5577 : 2009 | Identical |
| BS EN ISO 19285:2017 | Non-destructive testing of welds. Phased array ultrasonic testing (PAUT). Acceptance levels |
| PD ISO/TS 16829:2017 | Non-destructive testing. Automated ultrasonic testing. Selection and application of systems |
| UNI EN ISO 16826 : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - EXAMINATION FOR DISCONTINUITIES PERPENDICULAR TO THE SURFACE |
| NF EN ISO 10893-9 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| DIN EN ISO 18563-3:2016-06 | Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Combined systems (ISO 18563-3:2015) |
| ONORM EN ISO 10893-8 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| BS ISO 4992-2:2006 | Steel castings. Ultrasonic examination Steel castings for highly stressed components |
| 15/30322615 DC : 0 | BS ISO 19675 - NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR A CALIBRATION BLOCK FOR PHASED ARRAY TESTING (PAUT) |
| UNE-EN ISO 7963:2011 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) |
| DIN EN ISO 16823:2014-07 | Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012) |
| 09/30166488 DC : 0 | BS ISO 10893-11 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSAL IMPERFECTIONS |
| ISO 16831:2012 | Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment |
| NF EN ISO 10893-10 : 2011 | NON DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSAL IMPERFECTIONS |
| UNE-EN ISO 2400:2013 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012) |
| UNI EN ISO 16823 : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TRANSMISSION TECHNIQUE |
| EN ISO 22825:2017 | Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017) |
| UNE-EN ISO 16148:2016 | Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016) |
| EN ISO 2400:2012 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012) |
| DIN EN ISO 10893-11:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| DIN EN ISO 7963:2010-12 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) |
| 09/30166482 DC : 0 | BS ISO 10893-9 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| BS EN ISO 16946:2017 | Non-destructive testing. Ultrasonic testing. Specification for step wedge calibration block |
| 09/30166485 DC : 0 | BS ISO 10893-10 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATIC FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSAL IMPERFECTIONS |
| UNE-EN ISO 10893-9:2011 | Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011) |
| BS EN ISO 16823:2014 | Non-destructive testing. Ultrasonic testing. Transmission technique |
| BS EN ISO 10893-11:2011 | Non-destructive testing of steel tubes Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| DIN EN ISO 10893-8:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| I.S. EN ISO 16823:2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TRANSMISSION TECHNIQUE (ISO 16823:2012) |
| DIN EN ISO 16826 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - EXAMINATION FOR DISCONTINUITIES PERPENDICULAR TO THE SURFACE (ISO 16826:2012) |
| UNE-EN ISO 10893-12:2011 | Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011) |
| I.S. EN ISO 10893-9:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| DIN EN ISO 16946:2016-09 (Draft) | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR STEP WEDGE CALIBRATION BLOCK (ISO 16946:2017) |
| I.S. EN ISO 10893-8:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| ISO 25902-2:2010 | Titanium pipes and tubes Non-destructive testing Part 2: Ultrasonic testing for the detection of longitudinal imperfections |
| NF EN ISO 7963 : 2010 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING SPECIFICATION FOR CALIBRATION BLOCK NO 2 |
| UNE-EN ISO 10893-10:2011 | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
| UNI EN ISO 7963 : 2010 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR CALIBRATION BLOCK N DEGREE 2 |
| EN ISO 19285:2017 | Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO 19285:2017) |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| UNI EN ISO 10893-10 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| DIN EN ISO 10893-12:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| UNE-EN ISO 10893-8:2011 | Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) |
| BS EN ISO 7963:2010 | Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2 |
| BS EN ISO 2400:2012 | Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1 |
| BS EN ISO 18563-2:2017 | Non-destructive testing. Characterization and verification of ultrasonic phased array equipment Probes |
| 09/30166492 DC : 0 | BS ISO 10893-12 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| 10/30195043 DC : 0 | BS EN ISO 22825 - NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL-BASED ALLOYS |
| 18/30337971 DC : DRAFT APR 2018 | BS ISO 20890-1 - IN-SERVICE INSPECTIONS FOR PRIMARY COOLANT CIRCUIT COMPONENTS OF LIGHT WATER REACTORS - PART 1: MECHANIZED ULTRASONIC TESTING |
| ONORM EN ISO 10893-11 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| DIN EN ISO 10893-9:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| BS EN ISO 10893-10:2011 | Non-destructive testing of steel tubes Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
| BS ISO 4992-1:2006 | Steel castings. Ultrasonic examination Steel castings for general purposes |
| 04/30087406 DC : DRAFT NOV 2004 | ISO 7963 - WELDS IN STEEL - CALIBRATION BLOCK NO. 2 FOR ULTRASONIC EXAMINATION OF WELDS |
| 09/30166479 DC : 0 | BS ISO 10893-8 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| NF EN ISO 10893-8 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| BS ISO 10830:2011 | Space systems. Non-destructive testing. Automatic ultrasonic inspection method of graphite ingot for solid rocket motors |
| 16/30345944 DC : 0 | BS EN ISO 22825 - NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL-BASED ALLOYS |
| UNE-EN ISO 16946:2017 | Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017) |
| I.S. EN ISO 16946:2017 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR STEP WEDGE CALIBRATION BLOCK (ISO 16946:2017) |
| ISO 4992-2:2006 | Steel castings Ultrasonic examination Part 2: Steel castings for highly stressed components |
| ISO 22825:2017 | Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys |
| ISO 10893-9:2011 | Non-destructive testing of steel tubes Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes |
| ISO 10893-11:2011 | Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| ISO 7963:2006 | Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2 |
| EN ISO 10893-12:2011 | Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011) |
| EN ISO 10893-10:2011 | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
| EN ISO 16148:2016 | Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016) |
| EN ISO 10893-8:2011 | Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) |
| EN ISO 10893-9:2011 | Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011) |
| EN ISO 10893-11:2011 | Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011) |
| I.S. EN ISO 16148:2016 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBE - ACOUSTIC EMISSION EXAMINATION (AT) AND FOLLOW-UP ULTRASONIC EXAMINATION (UT) FOR PERIODIC INSPECTION AND TESTING (ISO 16148:2016) |
| EN ISO 16823:2014 | Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012) |
| ISO 19675:2017 | Non-destructive testing Ultrasonic testing Specification for a calibration block for phased array testing (PAUT) |
| DIN EN ISO 16826:2014-06 | Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012) |
| DIN EN ISO 16823 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - TRANSMISSION TECHNIQUE (ISO 16823:2012) |
| I.S. EN ISO 10893-12:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| NF EN ISO 10893-12 : 2011 | NON DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| I.S. EN ISO 17640:2017 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TECHNIQUES, TESTING LEVELS, AND ASSESSMENT (ISO 17640:2017) |
| UNE-EN ISO 16823:2014 | Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012) |
| BS ISO 10332:2010 | Non-destructive testing of steel tubes. Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness |
| I.S. EN ISO 16826:2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - EXAMINATION FOR DISCONTINUITIES PERPENDICULAR TO THE SURFACE (ISO 16826:2012) |
| ISO 20669:2017 | Non-destructive testing — Pulsed eddy current testing of ferromagnetic metallic components |
| 09/30167484 DC : 0 | BS ISO 10332 - NON-DESTRUCTIVE TESTING OF STEEL TUBES - AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR VERIFICATION OF HYDRAULIC LEAK-TIGHTNESS AS A SUBSTITUTION FOR THE HYDRAULIC TEST |
| BS EN ISO 10893-8:2011 | Non-destructive testing of steel tubes Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
| ISO 18175:2004 | Non-destructive testing Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments |
| UNI EN ISO 10893-9 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| I.S. EN ISO 10893-10:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| I.S. EN ISO 18563-3:2015 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC PHASED ARRAY EQUIPMENT - PART 3: COMBINED SYSTEMS (ISO 18563-3:2015) |
| UNI EN ISO 10893-12 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| UNI EN ISO 10893-11 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| I.S. EN ISO 2400:2012 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR CALIBRATION BLOCK NO. 1 (ISO 2400:2012) |
| UNE-EN ISO 10893-11:2011 | Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011) |
| I.S. EN ISO 18563-2:2017 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC PHASED ARRAY EQUIPMENT - PART 2: PROBES (ISO 18563-2:2017) |
| I.S. EN ISO 19285:2017 | NON-DESTRUCTIVE TESTING OF WELDS - PHASED ARRAY ULTRASONIC TESTING (PAUT) - ACCEPTANCE LEVELS (ISO 19285:2017) |
| ISO 12715:2014 | Non-destructive testing Ultrasonic testing Reference blocks and test procedures for the characterization of contact probe sound beams |
| ISO 4992-1:2006 | Steel castings Ultrasonic examination Part 1: Steel castings for general purposes |
| ISO 16809:2017 | Non-destructive testing — Ultrasonic thickness measurement |
| EN ISO 11666:2018 | Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018) |
| I.S. EN ISO 7963:2010 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR CALIBRATION BLOCK NO. 2 |
| I.S. EN ISO 22825:2017 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - TESTING OF WELDS IN AUSTENITIC STEELS AND NICKEL-BASED ALLOYS (ISO 22825:2017) |
| DIN EN ISO 16148:2016-09 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBES - ACOUSTIC EMISSION EXAMINATION (AT) AND FOLLOW-UP ULTRASONIC EXAMINATION (UT) FOR PERIODIC INSPECTION AND TESTING (ISO 16148:2016) |
| ISO 10893-12:2011 | Non-destructive testing of steel tubes Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes |
| ISO 16826:2012 | Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface |
| ISO 2400:2012 | Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1 |
| ISO 18563-2:2017 | Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Probes |
| ISO 10893-8:2011 | Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
| ISO 16148:2016 | Gas cylinders Refillable seamless steel gas cylinders and tubes Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing |
| ISO 16823:2012 | Non-destructive testing — Ultrasonic testing — Transmission technique |
| UNE-EN ISO 18563-3:2016 | Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Combined systems (ISO 18563-3:2015) |
| ISO 18563-3:2015 | Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 3: Combined systems |
| EN ISO 16946:2017 | Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017) |
| EN ISO 18563-3:2015 | Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Combined systems (ISO 18563-3:2015) |
| EN ISO 7963:2010 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) |
| EN ISO 18563-2:2017 | Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Probes (ISO 18563-2:2017) |
| EN ISO 16826:2014 | Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012) |
| ABS 0014 : 2018 | GUIDE FOR NONDESTRUCTIVE INSPECTION OF HULL WELDS |
| ISO 10830:2011 | Space systems Non-destructive testing Automatic ultrasonic inspection method of graphite ingot for solid rocket motors |
| 12/30265041 DC : 0 | BS EN ISO 16946 - NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR STEP WEDGE CALIBRATION BLOCK |
| UNI EN ISO 10893-8 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
| BS EN ISO 10893-12:2011 | Non-destructive testing of steel tubes Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes |
| BS ISO 19675:2017 | Non-destructive testing. Ultrasonic testing. Specification for a calibration block for phased array testing (PAUT) |
| BS EN ISO 16826:2014 | Non-destructive testing. Ultrasonic testing. Examination for discontinuities perpendicular to the surface |
| BS EN ISO 10893-9:2011 | Non-destructive testing of steel tubes Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes |
| DIN EN ISO 2400:2013-01 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012) |
| BS ISO 20669:2017 | Non-destructive testing. Pulsed eddy current testing of ferromagnetic metallic components |
| ONORM EN ISO 10893-10 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| ONORM EN ISO 10893-12 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 12: AUTOMATED FULL PERIPHERAL ULTRASONIC THICKNESS TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES |
| 11/30240176 DC : 0 | BS EN ISO 2400 - NON-DESTRUCTIVE TESTING - ULTRASONIC EXAMINATION - SPECIFICATION FOR CALIBRATION BLOCK NO. 1 |
| DIN EN ISO 10893-10:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| ONORM EN ISO 10893-9 : 2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
| ISO 10332:2010 | Non-destructive testing of steel tubes Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness |
| BS EN ISO 18563-3:2015 | NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC PHASED ARRAY EQUIPMENT - PART 3: COMBINED SYSTEMS |
| 18/30338013 DC : DRAFT APR 2018 | BS ISO 20890-5 - IN-SERVICE INSPECTIONS FOR PRIMARY COOLANT CIRCUIT COMPONENTS OF LIGHT WATER REACTORS - PART 5: EDDY CURRENT TESTING OF STEAM GENERATOR HEATING TUBES |
| I.S. EN ISO 11666:2018 | NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING - ACCEPTANCE LEVELS (ISO 11666:2018) |
| BS EN ISO 11666:2018 | Non-destructive testing of welds. Ultrasonic testing. Acceptance levels |
| ISO/TS 16829:2017 | Non-destructive testing — Automated ultrasonic testing — Selection and application of systems |
| UNE-EN ISO 19285:2018 | Non-destructive testing of welds - Phased array ultrasonic testing (PAUT) - Acceptance levels (ISO 19285:2017) |
| BS EN ISO 22825:2017 | Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys |
| UNE-EN ISO 16826:2014 | Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012) |
| EN ISO 17640:2017 | Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2017) |
| ISO 11666:2018 | Non-destructive testing of welds — Ultrasonic testing — Acceptance levels |
| BS EN ISO 17640:2017 | Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment |
| I.S. EN ISO 10893-11:2011 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
| ISO 10893-10:2011 | Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
| BS EN ISO 16148:2016 | Gas cylinders. Refillable seamless steel gas cylinders and tubes. Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing |
| ISO 16946:2017 | Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block |
| ISO 16828:2012 | Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| ISO 2400:2012 | Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1 |
| EN 16018:2011 | Non-destructive testing - Terminology - Terms used in ultrasonic testing with phased arrays |
| AS ISO 16809:2020 | Non-destructive testing - Ultrasonic thickness measurement |
| ISO 16946:2017 | Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block |
| ISO 23279:2017 | Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds |
| ISO 7963:2006 | Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.