ISO 5356-2:2012
Current
Current
The latest, up-to-date edition.
Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
13-11-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 5356-2:2012 specifies dimensional requirements for screw-threaded weight-bearing conical connectors intended for use with inhalation anaesthesia apparatus and ventilators. Such connectors are intended for mounting heavy accessories.
ISO 5356-2:2012 specifies requirements for the following screw-threaded, weight-bearing conical connectors:
- 22 mm connectors;
- 22/15 mm coaxial connectors.
| Committee |
ISO/TC 121/SC 1
|
| DevelopmentNote |
Supersedes ISO/DIS 5356-2. (11/2012)
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN ISO 5356-2:2013 | Identical |
| EN ISO 5356-2:2012 | Identical |
| SN EN ISO 5356-2:2013 | Identical |
| NBN EN ISO 5356-2 : 2013 | Identical |
| DIN EN ISO 5356-2:2013-03 | Identical |
| UNI EN ISO 5356-2 : 2013 | Identical |
| BS EN ISO 5356-2:2012 | Identical |
| BIS IS/ISO 5356-2 : 2015(R2015) | Identical |
| NEN EN ISO 5356-2 : 2012 | Identical |
| NS EN ISO 5356-2 : 2012 | Identical |
| I.S. EN ISO 5356-2:2012 | Identical |
| SS-EN ISO 5356-2:2012 | Identical |
| PN EN ISO 5356-2 : 2013 | Identical |
| NF EN ISO 5356-2 : 2013 | Identical |
| ONORM EN ISO 5356-2 : 2013 | Identical |
| NFS 90 125 : LATEST | Identical |
| UNE-EN 1281-2:1996 | Identical |
| BS EN 1281-2:1996 | Similar to |
| NEN ISO 5356-2 : 2006 | Identical |
| EN 1281-2 : 1995 | Identical |
| NF ISO 5356-2 : 1988 | Identical |
| I.S. EN 1281-2:1996 | Identical |
| BS 3849-2:1988 | Identical |
| DIN EN 1281-2:1996-01 | Corresponds |
| DIN ISO 5356-2:1991-04 | Identical |
| UNE-EN ISO 80369-1:2011 | Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2010) |
| I.S. EN ISO 80369-1:2010 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
| CSA Z8835.3 : 2008 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| DD ISO/TS 18835:2004 | Inhalational anaesthesia systems. Draw-over vaporizers and associated equipment |
| BS EN ISO 23328-2:2009 | Breathing system filters for anaesthetic and respiratory use Non-filtration aspects |
| 04/30099768 DC : DRAFT DEC 2004 | PREN ISO 8835-3 - INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: ANAESTHETIC GAS SCAVENGING SYSTEMS - TRANSFER AND RECEIVING SYSTEMS |
| AAMI ISO 80369-1 : 2010 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN ISO 80369-7:2017 | Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01) |
| CSA ISO 5356-1 : 2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS |
| 01/560793 DC : DRAFT FEB 2001 | IEC/DIS 60601-2-13 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY OF ANAESTHETIC SYSTEMS |
| 09/30203808 DC : 0 | BS EN ISO 80601-2-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| DIN EN ISO 8835-3:2011-02 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| UNI EN 13976-2 : 2011 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| BS EN 60601-2-13:2006 | Medical electrical equipment Particular requirements for the safety and essential performance of anaesthetic systems |
| CSA Z10651.6 : 2006 : R2015 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES |
| CAN/CSA-C22.2 NO. 80601-2-72:17 | Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (Adopted ISO 80601-2-72:2015, first edition, 2015-09-01, with Canadian deviations) |
| CSA Z17510.1 : 2010 | SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT |
| I.S. EN 80369-5:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS |
| BS EN ISO 80601-2-12:2011 | Medical electrical equipment Particular requirements for basic safety and essential performance of critical care ventilators |
| ISO 17510:2015 | Medical devices — Sleep apnoea breathing therapy — Masks and application accessories |
| UNI CEI EN ISO 80369-1 : 2011 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
| AAMI CN6 : 2015 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS |
| UNE-EN ISO 80369-6:2016 | Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neuraxial applications (ISO 80369-6:2016, Corrected version 2016-11-15) |
| BS EN ISO 80601-2-13:2012+A2:2019 | Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| DIN EN ISO 15883-2:2009-09 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| EN 13718-2:2015 | Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances |
| ISO 8835-5:2004 | Inhalational anaesthesia systems Part 5: Anaesthetic ventilators |
| ISO 15883-2:2006 | Washer-disinfectors — Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. |
| ISO 80369-3:2016 | Small-bore connectors for liquids and gases in healthcare applications — Part 3: Connectors for enteral applications |
| DIN EN ISO 23328-2:2009-07 | BREATHING SYSTEM FILTERS FOR ANAESTHETIC AND RESPIRATORY USE - PART 2: NON-FILTRATION ASPECTS |
| EN ISO 23328-2:2009 | Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects (ISO 23328-2:2002) |
| EN ISO 80601-2-13:2012 | Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011) |
| EN ISO 5356-1:2015 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015) |
| EN 13544-1:2007+A1:2009 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| CSA Z168.5.1 : 1997 | ANAESTHESIA VENTILATORS |
| BS EN ISO 80601-2-13:2012 | Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| 09/30173644 DC : 0 | BS EN ISO 80369-1 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 80601-2-72:2015 | Medical electrical equipment Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| CSA Z15883-5:09 (R2019) | Washer-disinfectors - Part 5: Test soils and methods for demonstrating cleaning efficacy (Adopted ISO/TS 15883-5:2005, first edition, 2005-11-15) |
| I.S. EN ISO 80369-6:2016 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS (ISO/IEC/DIS 80369-6:2014) |
| BS ISO 10651-5:2006 | Lung ventilators for medical use. Particular requirements for basic safety and essential performance Gas-powered emergency resuscitators |
| DIN EN ISO 80601-2-72:2016-04 | Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015) |
| 15/30288418 DC : 0 | BS EN ISO 80369-2 - SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 2: CONNECTORS FOR BREATHING SYSTEMS AND DRIVING GASES APPLICATIONS |
| BS EN ISO 80369-1:2010 | Small bore connectors for liquids and gases in healthcare applications General requirements |
| UNI EN ISO 80601-2-12 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| ISO 80369-6:2016 | Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications |
| 12/30266576 DC : 0 | BS EN 13718-2 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS OF AIR AMBULANCES |
| BS 5724-2.204(1999) : 1999 | ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS |
| CEI EN 80369-5 : 1ED 2017 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS |
| UNE-EN 13976-2:2011 | Rescue systems - Transportation of incubators - Part 2: System requirements |
| CSA Z15883-5:2009 | WASHER-DISINFECTORS - PART 5: TEST SOILS AND METHODS FOR DEMONSTRATING CLEANING EFFICACY |
| I.S. EN 60601-2-13:2006 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS |
| I.S. EN ISO 80369-3:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 3: CONNECTORS FOR ENTERAL APPLICATIONS (ISO/IEC/DIS 80369-3:2014) |
| I.S. ISO 5369:1987 | BREATHING MACHINES FOR MEDICAL USE - LUNG VENTILATORS |
| UNI EN ISO 23328-2 : 2009 | BREATHING SYSTEM FILTERS FOR ANAESTHETIC AND RESPIRATORY USE - PART 2: NON-FILTRATION ASPECTS |
| CEI UNI EN ISO 80369-1 : 2011 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
| NF EN 60601 2-13 : 2007 AMD 1 2007 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS |
| CSA Z17510.2 : 2009 | SLEEP APNOEA BREATHING THERAPY - PART 2: MASKS AND APPLICATION ACCESSORIES |
| CSA C22.2 No. 80601-2-12 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| BS EN ISO 80369-6:2016 | Small bore connectors for liquids and gases in healthcare applications Connectors for neuraxial applications |
| ASTM F 1343 : 2002 | Standard Specification for Anesthetic Gas Scavenging Systems-Transfer and Receiving Systems (Withdrawn 2011) |
| DIN EN ISO 17510-2:2009-07 | SLEEP APNOEA BREATHING THERAPY - PART 2: MASKS AND APPLICATION ACCESSORIES |
| DIN EN ISO 8835-2:2009-08 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS |
| DIN EN ISO 17510-1:2009-07 | Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment (ISO 17510-1:2007) |
| BS EN ISO 15883-2:2009 | Washer-disinfectors Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. |
| UNE-EN ISO 80601-2-13:2013 | Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011) |
| BS EN ISO 8835-2:2009 | Inhalational anaesthesia systems Anaesthetic breathing systems (ISO 8835-2:2007) |
| BS EN ISO 9360-1:2009 | Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans HMEs for use with minimal tidal volumes of 250 ml |
| I.S. EN ISO 5356-1:2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS (ISO 5356-1:2015) |
| I.S. EN ISO 15883-2:2009 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| I.S. EN ISO 17510-1:2009 | SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT |
| EN ISO 17510-1:2009 | Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment (ISO 17510-1:2007) |
| I.S. EN ISO 17510-2:2009 | SLEEP APNOEA BREATHING THERAPY - PART 2: MASKS AND APPLICATION ACCESSORIES |
| I.S. EN 794-3:1998 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| I.S. EN ISO 9360-1:2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART 1: HMES FOR USE WITH MINIMUM TIDAL VOLUMES OF 250 ML |
| DIN EN ISO 10651-2:2011-06 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| UNI EN 794-3 : 2009 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| BS 3353:1987 | Specification for anaesthetic reservoir bags |
| NF EN ISO 8835-3 : 2009 AMD 1 2011 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| I.S. EN ISO 8835-2:2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS |
| BS EN ISO 80369-7:2017 | Small-bore connectors for liquids and gases in healthcare applications Connectors for intravascular or hypodermic applications |
| 15/30300279 DC : 0 | BS ISO 80601-2-74 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-74: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY HUMIDIFYING EQUIPMENT |
| AAMI ISO 10651-5 : 2006 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| BS 5724-2.30(1993) : 1993 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR CAPNOMETERS FOR USE WITH HUMANS |
| BS 5724-2.202(1997) : 1997 + A2 2009 | LUNG VENTILATORS - PART 1: PARTICULAR REQUIREMENTS FOR CRITICAL CARE VENTILATORS |
| ISO 9918:1993 | Capnometers for use with humans Requirements |
| BS EN 60601-2-12:2006 | Medical electrical equipment Particular requirements for the safety of lung ventilators. Critical care ventilators |
| CSA ISO 27427 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
| 03/103294 DC : DRAFT JAN 2003 | BS EN ISO 10651-6 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME CARE VENTILATORY SUPPORT DEVICES |
| CSA Z10651.6 : 2006 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES |
| UNE-EN 80369-5:2017 | Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications |
| CEI EN 60601-2-12 : 2007 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS |
| I.S. CEN ISO TS 15883-5:2006 | WASHER-DISINFECTORS - PART 5: TEST SOILS AND METHODS FOR DEMONSTRATING CLEANING EFFICACY |
| ANSI/AAMI/ISO 80369-7:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS |
| I.S. EN ISO 80601-2-12:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011) |
| I.S. EN ISO 23328-2:2009 | BREATHING SYSTEM FILTERS FOR ANAESTHETIC AND RESPIRATORY USE - PART 2: NON-FILTRATION ASPECTS |
| CEN ISO/TS 15883-5:2005 | Washer-disinfectors - Part 5: Test soils and methods for demonstrating cleaning efficacy (ISO/TS 15883-5:2005) |
| I.S. EN ISO 80601-2-13:2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011) |
| CSA Z8835.2 : 2008 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS FOR ADULTS |
| EN ISO 80369-1:2010 | Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2010) |
| DIN EN ISO 5356-1:2015-06 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS (ISO 5356-1:2015) |
| DIN EN ISO 10651-6:2011-06 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES |
| DIN EN 13544-1:2009-12 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| DIN EN 13718-2:2015-05 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| ISO 8835-2:2007 | Inhalational anaesthesia systems Part 2: Anaesthetic breathing systems |
| ISO 8835-3:2007 | Inhalational anaesthesia systems Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems |
| UNE-EN 13718-2:2015 | Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances |
| ISO 10651-2:2004 | Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 2: Home care ventilators for ventilator-dependent patients |
| I.S. EN 13544-1:2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| CSA C22.2 No. 80601-2-12 : 2012(R2017) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| UNI EN ISO 10651-2 : 2009 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR- DEPENDENT PATIENTS |
| UNI EN ISO 8835-5 : 2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHETIC VENTILATORS |
| UNI EN ISO 17510-2 : 2009 | SLEEP APNOEA BREATHING THERAPY - PART 2: MASKS AND APPLICATION ACCESSORIES |
| UNI EN ISO 9360-1 : 2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART 1: HMES FOR USE WITH MINIMUM TIDAL VOLUMES OF 250 ML |
| UNI EN ISO 15883-2 : 2009 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER- DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| UNI EN 13544-1 : 2009 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| UNI EN ISO 10651-6 : 2009 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES |
| UNI EN 794-1 : 2009 | LUNG VENTILATORS - PART 1: PARTICULAR REQUIREMENTS FOR CRITICAL CARE VENTILATORS |
| ISO 7767:1997 | Oxygen monitors for monitoring patient breathing mixtures — Safety requirements |
| PREN 13976-2 : DRAFT 2016 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| BS ISO 18835:2015 | Inhalational anaesthesia systems. Draw-over anaesthetic systems |
| UNI EN ISO 8835-2 : 2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS |
| ANSI/AAMI/ISO 80369-3:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 3: CONNECTORS FOR ENTERAL APPLICATIONS |
| 13/30264413 DC : 0 | BS EN ISO 80601-2-72 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| 16/30333925 DC : 0 | BS EN 13976-2 - RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| ONORM EN ISO 17510-1 : 2009 | SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT |
| BS ISO 8835-2:1999 | Inhalational anaesthesia systems Anaesthetic breathing systems for adults |
| BS EN ISO 80369-3:2016 | Small-bore connectors for liquids and gases in healthcare applications Connectors for enteral applications |
| UNE-EN ISO 80369-3:2017 | Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO 80369-3:2016) |
| 13/30272807 DC : 0 | BS ISO 18835 - INHALATIONAL ANAESTHESIA SYSTEMS - DRAW-OVER VAPORIZERS AND ASSOCIATED EQUIPMENT |
| 12/30244415 DC : DRAFT APR 2012 | BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
| UNI EN ISO 8835-3 : 2010 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| 03/103293 DC : DRAFT JAN 2003 | BS EN ISO 10651-2 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| CSA Z10651.2: 2006 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| PREN ISO 80369-1 : DRAFT 2009 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
| CSA Z8835.5 : 2006 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHETIC VENTILATORS |
| CSA Z9918 : 0 | CAPNOMETERS FOR USE WITH HUMANS - REQUIREMENTS |
| CSA ISO TS 18835 : 2014 | INHALATIONAL ANAESTHESIA SYSTEMS - DRAW-OVER VAPORIZERS AND ASSOCIATED EQUIPMENT |
| ANSI/AAMI/ISO 80369-6:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS |
| I.S. EN ISO 80601-2-72:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015) |
| UNI EN ISO 17510-1 : 2009 | SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT |
| ISO 80369-1:2010 | Small-bore connectors for liquids and gases in healthcare applications Part 1: General requirements |
| DIN EN ISO 80369-1:2015-09 (Draft) | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60601-2-12:2006 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS |
| I.S. EN 13976-2:2011 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| ISO 10651-5:2006 | Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 5: Gas-powered emergency resuscitators |
| ISO 80601-2-12:2011 | Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
| DIN EN ISO 8835-5:2009-07 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHESIA VENTILATORS |
| BS EN ISO 17510-1:2009 | Sleep apnoea breathing therapy Sleep apnoea breathing therapy equipment |
| ISO 9360-1:2000 | Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 1: HMEs for use with minimum tidal volumes of 250 ml |
| BS EN 13976-2:2011 | Rescue systems. Transportation of incubators System requirements |
| ISO 17510-2:2007 | Sleep apnoea breathing therapy Part 2: Masks and application accessories |
| BS EN ISO 10651-6:2009 | Lung ventilators for medical use. Particular requirements for basic safety and essential performance Home-care ventilatory support devices |
| BS EN 13544-1 : 2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| ISO 80601-2-72:2015 | Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| ANSI/AAMI ST15883-2:2013(R2015) (ISO 15883-2:2006 MOD) | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| ISO 80369-7:2016 | Small-bore connectors for liquids and gases in healthcare applications Part 7: Connectors for intravascular or hypodermic applications |
| BS EN 13328-2:2002 | Breathing system filters for anaesthetic and respiratory use Non-filtration aspects |
| BS EN 13718-2:2015 | Medical vehicles and their equipment. Air ambulances Operational and technical requirements for air ambulances |
| BS EN ISO 10651-2:2004 | Lung ventilators for medical use. Particular requirements for basic safety and essential performance Home care ventilators for ventilator-dependent patients |
| ISO 23328-2:2002 | Breathing system filters for anaesthetic and respiratory use — Part 2: Non-filtration aspects |
| ISO 10651-6:2004 | Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 6: Home-care ventilatory support devices |
| IEC 60601-2-13:2003+AMD1:2006 CSV | Medical electrical equipment - Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems |
| BS EN 794-3 : 1999 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| BS EN 740:1999 | Anaesthetic workstations and their modules. Particular requirements |
| ISO/TS 15883-5:2005 | Washer-disinfectors Part 5: Test soils and methods for demonstrating cleaning efficacy |
| ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
| ISO 80601-2-13:2011 | Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| I.S. EN 13718-2:2015 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| UNI EN ISO 80601-2-13 : 2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION |
| BS EN ISO 5356-1:2015 | Anaesthetic and respiratory equipment. Conical connectors Cones and sockets |
| I.S. EN 13718-2:2015+A1:2020 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| DIN EN 80369-5:2017-10 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS (IEC 80369-5:2016 + COR.1:2017) |
| EN ISO 80601-2-72:2015 | Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015) |
| EN ISO 10651-2:2009 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients (ISO 10651-2:2004) |
| EN ISO 15883-2:2009 | Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. (ISO 15883-2:2006) |
| EN ISO 10651-6:2009 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices (ISO 10651-6:2004) |
| EN ISO 8835-5:2009 | Inhalational anaesthesia systems - Part 5: Anaesthetic ventilators (ISO 8835-5:2004) |
| EN ISO 17510-2:2009 | Sleep apnoea breathing therapy - Part 2: Masks and application accessories (ISO 17510-2:2007) |
| EN ISO 80369-3:2016 | Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO 80369-3:2016) |
| EN ISO 9360-1:2009 | Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000) |
| EN 794-3:1998+A2:2009 | Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators |
| EN 794-1:1997+A2:2009 | Lung ventilators - Part 1: Particular requirements for critical care ventilators |
| EN ISO 8835-2:2009 | Inhalational anaesthesia systems - Part 2: Anaesthetic breathing systems (ISO 8835-2:2007) |
| 13/30290370 DC : 0 | BS ISO 17510 - MEDICAL DEVICES - SLEEP APNOEA BREATHING THERAPY - MASKS AND APPLICATION ACCESSORIES |
| NF EN ISO 80369-1 : 2011 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 8835-3 : 2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| I.S. EN ISO 8835-5:2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHESIA VENTILATORS |
| I.S. EN ISO 10651-2:2009 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| BS ISO 27427:2013 | Anaesthetic and respiratory equipment. Nebulizing systems and components |
| 07/30147572 DC : DRAFT SEP 2007 | BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
| CSA Z10651.3 : 0 | LUNG VENTILATORS FOR MEDICAL USE - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| ISO/TS 18835:2004 | Inhalational anaesthesia systems Draw-over vaporizers and associated equipment |
| EN ISO 80369-7:2017 | Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01) |
| ANSI/AAMI/ISO 80369-5:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS |
| NF EN 80369-5 : 2017 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 5: CONNECTORS FOR LIMB CUFF INFLATION APPLICATIONS |
| BS 7734:1994 | Specification for anaesthetic circle breathing systems |
| CSA Z15883-2 : 2009 : R2014 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| I.S. EN ISO 80369-7:2017 COR 2017 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR OR HYPODERMIC APPLICATIONS (ISO 80369-7:2016, CORRECTED VERSION 2016-12-01) |
| CSA Z10651.2 : 2006 : R2015 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| ISO 5358:1992 | Anaesthetic machines for use with humans |
| AAMI ST15883-2 : 2013 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| I.S. EN ISO 8835-3:2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| CSA Z15883-2 : 2009 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| CSA Z15883-5 : 2009 : R2014 | WASHER-DISINFECTORS - PART 5: TEST SOILS AND METHODS FOR DEMONSTRATING CLEANING EFFICACY |
| EN ISO 80369-6 : 2016 COR 2016 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS (ISO 80369-6:2016, CORRECTED VERSION 2016-11-15) |
| CEI EN 60601-2-13 : 2007 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS |
| EN 13976-2:2011 | Rescue systems - Transportation of incubators - Part 2: System requirements |
| DIN EN 13976-2:2016-03 (Draft) | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| ISO 18835:2015 | Inhalational anaesthesia systems Draw-over anaesthetic systems |
| ISO 27427:2013 | Anaesthetic and respiratory equipment — Nebulizing systems and components |
| DIN EN 794-3:2009-12 | Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators; German version EN 794-3:1998+A2:2009 |
| BS EN ISO 17510-2:2009 | Sleep apnoea breathing therapy Masks and application accessories |
| UNE-EN ISO 5356-1:2015 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015) |
| ISO 17510-1:2007 | Sleep apnoea breathing therapy Part 1: Sleep apnoea breathing therapy equipment |
| BS EN ISO 8835-5:2009 | Inhalational anaesthesia systems Anaesthesia ventilators |
| DIN EN ISO 80369-7:2017-10 | Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01) |
| DIN EN ISO 9360-1:2009-09 | Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000) |
| DIN EN 13976-2:2011-08 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| EN 13328-2:2002/A1:2003 | BREATHING SYSTEM FILTERS FOR ANAESTHETIC AND RESPIRATORY USE - PART 2: NON-FILTERATION ASPECTS |
| EN 60601-2-13 : 2006 AMD 1 2007 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS |
| EN 60601-2-12:2006 | Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung ventilators - Critical care ventilators |
| ONORM EN 794-3 : 2010 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| CSA Z9360.1 : 2007 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART 1: HMES FOR USE WITH MINIMUM TIDAL VOLUMES OF 250 ML |
| CSA Z10651-5 : 2008 : R2018 | Lung Ventilators for Medical Use - Particular Requirements for Basic Safety and Essential Performance - Part 5: Gas-Powered Emergency Resuscitators |
| CSA Z10651-5 : 2008 : R2013 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| CSA Z10651-5 : 2008 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| CSA Z9360.1 : 2007 : R2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART 1: HMES FOR USE WITH MINIMUM TIDAL VOLUMES OF 250 ML |
| UNE-EN 794-3:1999 | LUNG VENTILATORS. PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS. |
| CSA Z10651-5 : 2008 : INC : UPD 1 : 2011 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| UNE-EN 13544-1:2007 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.