ISO 5270:2012
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Pulps — Laboratory sheets — Determination of physical properties
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
04-08-2022
Superseded by
Language(s)
French, English
Published date
28-09-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 5270:2012 specifies the relevant International Standards to be used for the determination of physical properties of laboratory sheets made of all kind of pulps. It is applicable to laboratory sheets prepared in accordance with ISO 5269-1, ISO 5269-2 or ISO 5269-3.
In ISO 5270:2012, it is left to the pulp producer and the pulp user to agree upon which properties are relevant to be tested. The results are, if applicable, reported in index form.
| DevelopmentNote |
Supersedes ISO/DIS 5270. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 5270 : 2013 | Identical |
| NF EN ISO 5270 : 2012 | Identical |
| NBN EN ISO 5270 : 2012 | Identical |
| NEN EN ISO 5270 : 2012 | Identical |
| NS EN ISO 5270 : 2012 | Identical |
| I.S. EN ISO 5270:2012 | Identical |
| PN EN ISO 5270 : 2013 | Identical |
| SN EN ISO 5270 : 2012 | Identical |
| UNI EN ISO 5270 : 2012 | Identical |
| UNE-EN ISO 5270:2013 | Identical |
| BS EN ISO 5270:2012 | Identical |
| EN ISO 5270:2012 | Identical |
| DIN EN ISO 5270:2013-02 | Identical |
| NFQ 50 009 : 1980 | Similar to |
| PN ISO 5270 : 1999 | Identical |
| NEN ISO 5270 : 1998 | Identical |
| BS ISO 5270:1998 | Identical |
| UNE 57055:1994 | Identical |
| BS 6095:1981 | Similar to |
| ISO 9895:2008 | Paper and board — Compressive strength — Short-span test |
| BS ISO 5269-3:2008 | Pulps. Preparation of laboratory sheets for physical testing Conventional and Rapid-Köthen sheet formers using a closed water system |
| ISO 5269-3:2008 | Pulps — Preparation of laboratory sheets for physical testing — Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system |
| UNE-EN ISO 5264-2:2011 | Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2011) |
| ISO 1924-1:1992 | Paper and board Determination of tensile properties Part 1: Constant rate of loading method |
| I.S. EN ISO 5264-2:2011 | PULPS - LABORATORY BEATING - PART 2: PFI MILL METHOD |
| I.S. EN ISO 1924-2:2009 | PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
| BS 4415-2:1986 | Determination of the tensile properties of paper and board Constant rate of elongation method |
| DIN EN ISO 5264-2:2011-05 | Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2011) |
| UNI EN ISO 5264-2 : 2011 | PULPS - LABORATORY BEATING - PART 2: PFI MILL METHOD |
| UNI EN ISO 1924-2 : 2009 | PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
| EN ISO 5264-2:2011 | Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2011) |
| 07/30162477 DC : 0 | BS ISO 5269-3 - PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 3: CONVENTIONAL AND RAPID-KOETHEN SHEET FORMERS USING A CLOSED WATER SYSTEM |
| BS EN ISO 5264-2:2011 | Pulps. Laboratory beating PFI mill method |
| ISO 1924-2:2008 | Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min) |
| ISO 5264-2:2011 | Pulps Laboratory beating Part 2: PFI mill method |
| BS EN ISO 1924-2:2008 | Paper and board. Determination of tensile properties Constant rate of elongation method (20 mm/min) |
| EN ISO 1924-2:2008 | Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (ISO 1924-2:2008) |
| BS ISO 9895:2008 | Paper and board. Compressive strength. Short-span test |
| UNI ISO 9895 : 2009 | PAPER AND BOARD - COMPRESSIVE STRENGTH - SHORT-SPAN TEST |
| DIN EN ISO 1924-2:2009-05 | PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
| ISO 5269-1:2005 | Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method |
| ISO 2493-1:2010 | Paper and board Determination of bending resistance Part 1: Constant rate of deflection |
| ISO 1974:2012 | Paper — Determination of tearing resistance — Elmendorf method |
| ISO 5636-3:2013 | Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method |
| ISO 5636-4:2013 | Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method |
| ISO 11476:2016 | Paper and board Determination of CIE whiteness, C/2 (indoor illumination conditions) |
| ISO 1924-3:2005 | Paper and board Determination of tensile properties Part 3: Constant rate of elongation method (100 mm/min) |
| ISO 7263:2011 | Corrugating medium Determination of the flat crush resistance after laboratory fluting |
| ISO 5626:1993 | Paper Determination of folding endurance |
| ISO 2493-2:2011 | Paper and board Determination of bending resistance Part 2: Taber-type tester |
| ISO 2471:2008 | Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method |
| ISO 9895:2008 | Paper and board — Compressive strength — Short-span test |
| ISO 15361:2000 | Pulps Determination of zero-span tensile strength, wet or dry |
| AS 1301.450:2019 | Methods of test for pulp and paper Compression strength of paper and board - Short span test (ISO 9895:2008, MOD) |
| ISO 2758:2014 | Paper Determination of bursting strength |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO 5628:2012 | Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods |
| ISO 2470-1:2016 | Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness) |
| ISO 5636-5:2013 | Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method |
| ISO 1924-2:2008 | Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min) |
| ISO 11475:2017 | Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight) |
| ISO 536:2012 | Paper and board Determination of grammage |
| ISO 12192:2011 | Paper and board — Determination of compressive strength — Ring crush method |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
| ISO 5269-3:2008 | Pulps — Preparation of laboratory sheets for physical testing — Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system |
| AS 1301.448:2019 | Methods of test for pulp and paper Tensile strength of paper and paperboard (constant rate of elongation method, 20 mm/min) (ISO 1924-2:2008, MOD) |
| ISO 3688:1999 | Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness) |
| ISO 9416:2017 | Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
| ISO 15754:2009 | Paper and board Determination of z-directional tensile strength |
| ISO 5269-2:2004 | Pulps — Preparation of laboratory sheets for physical testing — Part 2: Rapid-Köthen method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.