ISO 4677-2:1985
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Atmospheres for conditioning and testing Determination of relative humidity Part 2: Whirling psychrometer method
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
14-02-2019
Language(s)
English, French
Published date
24-10-1985
Important note : All end users must be registered with an Account prior to user licenses being assigned.
The method specified applies for temperatures within the range from 5 to 80 C. The property is determined with an uncertainty not exceeding 3 % r. h. The method is restricted to wet-bulb temperatures not lower than 1 C, dry-bulb temperatures not higher than 80 C, and pressures not differing from standard atmospheric pressure by more than 30 %.
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| Standards | Relationship |
| NFX 15 118 : 1996 | Similar to |
| UNE 7523-2:1997 | Identical |
| BS EN 62282-3-200:2016 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| PD IEC/TS 62282-7-2:2014 | Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC) |
| BS EN 61631:2001 | Test method for the mechanical strength of cores made of magnetic oxides |
| 08/30152625 DC : DRAFT APR 2008 | BS ISO 16110-2 - HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 2: PROCEDURES TO DETERMINE EFFICIENCY |
| PREN 14425-3 : DRAFT 2009 | ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD |
| I.S. EN 62282-6-200:2017 | FUEL CELL TECHNOLOGIES - PART 6-200: MICRO FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| I.S. EN 62282-3-2:2006 | FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| I.S. EN 14425-3:2010 | ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD |
| UNE-EN ISO 8502-4:2017 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017) |
| EN 14425-3:2010 | Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method |
| NF EN 61631 : 2005 | TEST METHOD FOR THE MECHANICAL STRENGTH OF CORES MADE OF MAGNETIC OXIDES |
| EN 62282-3-200:2016 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| 14/30280137 DC : 0 | BS EN 62282-3-200 ED 2.0 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| 11/30246729 DC : 0 | BS EN 62282-6-200 - FUEL CELL TECHNOLOGIES - PART 6-200: MICRO FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| 03/305320 DC : DRAFT MAY 2003 | BS 1339 - HUMIDITY - PART 3: GUIDE TO THE MEASUREMENT OF HUMIDITY |
| 08/19979365 DC : DRAFT FEB 2008 | BS ISO 15928-3 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 3: STRUCTURAL DURABILITY |
| DD ENV 12923-2:2001 | Advanced technical ceramics. Monolithic ceramics Oxidation test |
| I.S. EN 62282-3-200:2016 | FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| I.S. EN ISO 8502-4:2017 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINES - PART 4: GUIDANCE ON THE ESTIMATION OF THE PROBABILITY OF CONDENSATION PRIOR TO PAINT APPLICATION (ISO 8502-4:2017) |
| I.S. EN 843-1:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 1: DETERMINATION OF FLEXURAL STRENGTH |
| BS EN 62282-6-200:2012 | Fuel cell technologies Micro fuel cell power systems. Performance test methods |
| 14/30250134 DC : 0 | BS EN ISO 8502-4 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 4: GUIDANCE ON THE ESTIMATION OF THE PROBABILITY OF CONDENSATION PRIOR TO PAINT APPLICATION |
| 10/30173701 DC : 0 | BS EN 62282-3-200 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| BS ISO 4524-2:2000 | Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings Mixed flowing gas (MFG) environmental tests |
| UNE-EN 62282-6-200:2013 | Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods |
| BS 1339-3:2004 | Humidity Guide to the measurement of humidity |
| 09/30208469 DC : 0 | BS EN 14425-3 - ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD |
| BS EN 14425-3:2010 | Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics Chevron notched beam (CNB) method |
| IEC 62282-3-200:2015 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| IEC 62282-6-200:2016 | Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods |
| ISO 8502-4:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application |
| EN 61631:2001 | Test method for the mechanical strength of cores made of magnetic oxides |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| IEC 61631:2001 | Test method for the mechanical strength of cores made of magnetic oxides |
| I.S. EN 843-3:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 3: DETERMINATION OF SUBCRITICAL CRACK GROWTH PARAMETERS FROM CONSTANT STRESSING RATE FLEXURAL STRENGTH TESTS |
| BS 7079-B4(1993) : AMD 10700 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - GUIDE TO THE ESTIMATION OF THE PROBABILITY OF CONDENSATION OF A SURFACE TO BE PAINTED |
| 04/30125782 DC : DRAFT NOV 2004 | EN 843-1 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - PART 1: DETERMINATION OF FLEXURAL STRENGTH |
| BS EN 62282-3-2:2006 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| NF EN 14425-3 : 2010 | ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD |
| DIN EN ISO 8502-4:2014-06 (Draft) | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 4: GUIDANCE ON THE ESTIMATION OF THE PROBABILITY OF CONDENSATION PRIOR TO PAINT APPLICATION (ISO 8502-4:2017) |
| BS EN 843-1:2006 | Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Determination of flexural strength |
| BS EN 843-3:2005 | Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests |
| BS EN ISO 8502-4:2017 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Guidance on the estimation of the probability of condensation prior to paint application |
| DIN EN ISO 8502-4:2017-05 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 4: GUIDANCE ON THE ESTIMATION OF THE PROBABILITY OF CONDENSATION PRIOR TO PAINT APPLICATION (ISO 8502-4:2017) |
| EN ISO 8502-4:2017 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017) |
| EN 843-3:2005 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests |
| EN 843-1:2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength |
| DD ENV 843-3:1997 | Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests |
| 15/30301708 DC : 0 | BS EN 62282-6-200 ED 3.0 - FUEL CELL TECHNOLOGIES - PART 6-200: MICRO FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| ISO 4524-2:2000 | Metallic coatings Test methods for electrodeposited gold and gold alloy coatings Part 2: Mixed flowing gas (MFG) environmental tests |
| ISO 16311-4:2014 | Maintenance and repair of concrete structures — Part 4: Execution of repairs and prevention |
| IEC 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
| EN 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
| DIN EN 14425-3:2010-11 | Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method |
| DIN EN 843-3:2005-08 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests |
| EN 62282-6-200:2017 | Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods |
| DIN EN 843-1:2008-08 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength |
| PIP CTSL1000 : 2017 | APPLICATION OF INTERNAL LININGS |
| PIP CTSU1000 : 2018 | APPLICATION OF UNDERGROUND COATINGS |
| ENV 12923-2:2001 | Advanced technical ceramics - Monolithic ceramics - Part 2: Oxidation test |
| PIP CTSE1000 : 2012 | APPLICATION OF EXTERNAL COATINGS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.