ISO 4633:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
31-08-2023
Superseded by
Language(s)
English
Published date
03-06-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 4633:2015 specifies requirements for materials used in vulcanized rubber seals for the following:
a) cold drinking-water supplies (up to 50 °C);
b) drainage, sewerage, and rainwater systems (continuous flow up to 45 °C and intermittent flow up to 95 °C).
| Committee |
ISO/TC 45/SC 4
|
| DevelopmentNote |
Supersedes ISO 1398 (04/2001) Supersedes ISO/FDIS 4633. (06/2015)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN ISO 4633 : 2015 | Identical |
| SS-ISO 4633:2020 | Identical |
| UNE 53571:1989 | Identical |
| 17/30361340 DC : 0 | BS EN ISO 11298-1 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
| ISO 16611:2017 | Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests |
| ISO 16631:2016 | Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement |
| 16/30292774 DC : 0 | BS ISO 10639 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| DIN 8076-1:1984-03 | PIPELINES OF PLASTICS MATERIALS UNDER PRESSURE - SCREWED JOINTS OF METAL FOR PIPES OF POLYETHYLENE (PE) - GENERAL QUALITY REQUIREMENTS AND TEST METHODS |
| 17/30341312 DC : 0 | BS EN ISO 21225-1 - PLASTICS PIPING SYSTEMS FOR THE TRENCHLESS REPLACEMENT OF UNDERGROUND PIPELINE NETWORKS - PART 1: REPLACEMENT ON THE LINE BY PIPE BURSTING AND PIPE EXTRACTION |
| 13/30280432 DC : 0 | BS ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER UNDER PRESSURE - SPECIFICATIONS |
| BS ISO 13470:2012 | Trenchless applications of ductile iron pipes systems. Product design and installation |
| I.S. EN ISO 11298-1:2011 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL (ISO 11298-1:2018) |
| I.S. EN ISO 11297-1:2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 1: GENERAL (ISO 11297-1:2018) |
| ISO 21225-1:2018 | Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 1: Replacement on the line by pipe bursting and pipe extraction |
| ISO/TR 4191:2014 | Plastics piping systems for water supply Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) Guidance for installation |
| ISO 13470:2012 | Trenchless applications of ductile iron pipes systems — Product design and installation |
| I.S. EN 13565-1:2004 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| BS EN 877 : 1999 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| ISO 25780:2011 | Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques |
| 11/30237817 DC : 0 | BS ISO 7076-2 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 2: LOW EXPANSION FOAM EQUIPMENT |
| 17/30341315 DC : 0 | BS EN ISO 21225-2 - PLASTICS PIPING SYSTEMS FOR THE TRENCHLESS REPLACEMENT OF UNDERGROUND PIPELINE NETWORKS - PART 2: REPLACEMENT OFF THE LINE BY HORIZONTAL DIRECTIONAL DRILLING AND IMPACT MOLING |
| 11/30237814 DC : 0 | BS ISO 7076-1 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 1: FOAM PROPORTIONING EQUIPMENT |
| BS EN 13565-1 : 2003 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| 03/115115 DC : DRAFT OCT 2003 | ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER - SPECIFICATIONS |
| 05/30131849 DC : DRAFT APR 2005 | ISO 8772 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) |
| 08/30138102 DC : DRAFT MAR 2008 | BS ISO 25780 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY, IRRIGATION, DRAINAGE OR SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN - PIPES WITH FLEXIBLE JOINTS INTENDED TO BE INSTALLED USING JACKING TECHNIQUES |
| ISO 8773:2006 | Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene (PP) |
| ISO 9635-1:2014 | Agricultural irrigation equipment Irrigation valves Part 1: General requirements |
| ISO 11296-1:2018 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General |
| ISO 11297-1:2018 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 1: General |
| EN 13565-1:2003+A1:2007 | Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components |
| ISO 17885:2015 | Plastics piping systems Mechanical fittings for pressure piping systems Specifications |
| BS 2494:1990 | Specification for elastomeric seals for joints in pipework and pipelines |
| 12/30255878 DC : 0 | BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS |
| 07/30171473 DC : 0 | BS ISO 2531 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER APPLICATIONS |
| 05/30138208 DC : DRAFT AUG 2005 | ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
| 05/30131855 DC : DRAFT APR 2005 | ISO 8773 - PLASTICS PIPING SYSTEMS FOR UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) |
| BS ISO 25780:2011 | Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin. Pipes with flexible joints intended to be installed using jacking techniques |
| DIN EN 13565-1:2016-08 (Draft) | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| EN ISO 11298-1:2018 | Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018) |
| I.S. EN ISO 11296-1:2011 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 1: GENERAL (ISO 11296-1:2018) |
| ISO 10639:2017 | Plastics piping systems for pressure and non-pressure water supply Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| ISO 10467:2004 | Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| 16/30319470 DC : 0 | BS ISO 16611 - PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITHOUT PRESSURE - NON-CIRCULAR PIPES AND JOINTS MADE OF GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESINS (UP) - DIMENSIONS, REQUIREMENTS AND TESTS |
| ISO 8772:2006 | Plastics piping systems for non-pressure underground drainage and sewerage Polyethylene (PE) |
| 11/30211183 DC : 0 | BS ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER UNDER PRESSURE - SPECIFICATIONS |
| PD ISO/TR 4191:2014 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O). Guidance for installation |
| ISO 2531:2009 | Ductile iron pipes, fittings, accessories and their joints for water applications |
| NF EN 13565-1 : 2004 + A1 2008 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| PREN 13565-1 : DRAFT 2016 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| BS ISO 16611:2017 | Plastics piping systems for drainage and sewerage without pressure. Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP). Dimensions, requirements and tests |
| 16/30343625 DC : 0 | BS ISO 10467 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| ONORM ISO 25780 : 2013 | PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY, IRRIGATION, DRAINAGE OR SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN - PIPES WITH FLEXIBLE JOINTS INTENDED TO BE INSTALLED USING JACKING TECHNIQUES |
| BS ISO 19003:2006 | Rubber and rubber products. Guidance on the application of statistics to physical testing |
| BS 7677:1993 | Recommendations for classification of imperfections in pipe joint rings |
| ISO 7076-2:2012 | Fire protection - Foam fire extinguishing systems — Part 2: Low expansion foam equipment |
| EN ISO 11296-1:2018 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018) |
| ISO 7186:2011 | Ductile iron products for sewerage applications |
| ISO 4435:2003 | Plastics piping systems for non-pressure underground drainage and sewerage Unplasticized poly(vinyl chloride) (PVC-U) |
| ISO 11298-1:2018 | Plastics piping systems for renovation of underground water supply networks — Part 1: General |
| ISO 4422-5:1997 | Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply Specifications Part 5: Fitness for purpose of the system |
| ISO 19003:2006 | Rubber and rubber products — Guidance on the application of statistics to physical testing |
| 09/30185187 DC : 0 | BS ISO 7186 - DUCTILE IRON PRODUCTS FOR SEWAGE APPLICATIONS |
| 13/30271601 DC : 0 | BS ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
| BS ISO 17885:2015 | Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications |
| BS ISO 9635-1:2014 | Agricultural irrigation equipment. Irrigation valves General requirements |
| BS ISO 10639:2017 | Plastics piping systems for pressure and non-pressure water supply. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| BS ISO 16422:2014 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications |
| BS ISO 2531:2009 | Ductile iron pipes, fittings, accessories and their joints for water applications |
| 17/30361332 DC : 0 | BS EN ISO 11296-1 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 1: GENERAL |
| I.S. 424:1990 | UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PIPES AND FITTINGS FOR BURIED DRAINAGE AND SEWAGE SYSTEMS - SPECIFICATIONS |
| ISO 16422:2014 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications |
| UNE-ISO 16422:2015 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications |
| 16/30341197 DC : 0 | BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| EN ISO 11297-1:2018 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018) |
| ISO 3951-1:2013 | Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| ISO 815-2:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| ISO 815-1:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| ISO 2230:2002 | Rubber products — Guidelines for storage |
| ISO 2285:2013 | Rubber, vulcanized or thermoplastic Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load |
| ISO 3384-1:2011 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 1: Testing at constant temperature |
| ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
| ISO 3302-1:2014 | Rubber — Tolerances for products — Part 1: Dimensional tolerances |
| ISO 9691:1992 | Rubber — Recommendations for the workmanship of pipe joint rings — Description and classification of imperfections |
| ISO 6914:2013 | Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 7743:2017 | Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
| ISO 3387:2012 | Rubber Determination of crystallization effects by hardness measurements |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 1629:2013 | Rubber and latices — Nomenclature |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.