ISO 4498:2010
Current
Current
The latest, up-to-date edition.
Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English, Russian
Published date
09-06-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 4498:2010 specifies methods of hardness testing of sintered metal materials, excluding hardmetals.
Procedure 1 determines the apparent hardness of the whole material.
Procedure 1
- applies to sintered metal materials which have either not been subjected to any heat treatment, or which have been heat treated in such a way that the hardness is essentially uniform to a depth of at least 5 mm below the surface,
- applies to the surfaces of sintered metal materials which have been treated in such a way that the hardness is not uniform in the section to a depth of 5 mm below the surface,
- therefore applies to materials in which the hardness is obtained essentially by surface enrichment by carbon, or by carbon and nitrogen (for example, by carburizing, carbonitriding, nitrocarburizing or sulphidizing), and
- applies to materials which have been induction hardened.
Procedure 2 determines the microhardness of the metal phase.
Procedure 2
- applies to all types of sintered metal materials,
- is used, in particular, to determine the hardness profile of casehardened or carbonitrided materials in accordance with the method described in ISO 4507, and
also applies to any sintered metallic materials which have been subjected to surface treatments such as electrodeposited plating, chemical coating, chemical vapour deposition (CVD), physical vapour deposition (PVD), laser, ion bombardment, etc. To determine the microhardness of treated surfaces, Procedure 2 applies.
| DevelopmentNote |
Supersedes ISO 4498-1 and ISO 4498-2. (06/2005) Supersedes ISO/FDIS 4498. (06/2010)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN ISO 4498:2007 | Identical |
| NF EN ISO 4498 : 2010 | Identical |
| NBN EN ISO 4498 : 2010 | Identical |
| NEN EN ISO 4498 : 2010 | Identical |
| NS EN ISO 4498 : 2010 | Identical |
| I.S. EN ISO 4498:2010 | Identical |
| PN EN ISO 4498 : 2010 | Identical |
| SAC GB/T 9097 : 2016 | Identical |
| UNI EN ISO 4498 : 2010 | Identical |
| IS 15703 : 2018 | Identical |
| BS EN ISO 4498:2010 | Identical |
| EN ISO 4498:2010 | Identical |
| UNE-EN ISO 4498:2011 | Identical |
| DIN ISO 4498:2005-11 | Identical |
| NEN ISO 4498 : 2005 | Identical |
| BS ISO 4498:2005 | Identical |
| DIN EN ISO 4498:2010-11 | Identical |
| DIN ISO 4498 E : 2005 | Identical |
| 10/30197302 DC : 0 | BS ISO 22068 - SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| 10/30139347 DC : 0 | BS EN ISO 5755 - SINTERED METAL MATERIALS - SPECIFICATIONS |
| 13/30264462 DC : 0 | BS EN ISO 6508-1 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 1: TEST METHOD |
| UNE-EN ISO 5755:2013 | Sintered metal materials - Specifications (ISO 5755:2012) |
| DIN ISO 5755:2002-11 | SINTERED METAL MATERIALS - SPECIFICATIONS |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| ONORM EN ISO 5755 : 2013 | SINTERED METAL MATERIALS - SPECIFICATIONS (ISO 5755:2012) |
| DIN EN ISO 22068 E : 2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
| BS ISO 22068 : 2012 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| BS ISO 4507 : 2000 AMD 17025 | SINTERED FERROUS MATERIALS, CARBURIZED OR CARBONITRIDED - DETERMINATION AND VERIFICATION OF CASE-HARDENING DEPTH BY A MICRO-HARDNESS TEST |
| BS ISO 14168:2011 | Metallic powders, excluding hardmetals. Method for testing copper-base infiltrating powders |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| UNE-EN ISO 6508-1:2017 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| UNE-EN ISO 6506-1:2015 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| I.S. EN ISO 6506-1:2014 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
| I.S. EN ISO 6508-1:2016 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6508-1:2016) |
| DIN EN ISO 5755:2013-01 | Sintered metal materials - Specifications (ISO 5755:2012) |
| AGMA 942 : A2012(R2017) | METALLURGICAL SPECIFICATIONS FOR POWDER METALLURGY, PM, STEEL GEARING |
| I.S. EN ISO 5755:2012 | SINTERED METAL MATERIALS - SPECIFICATIONS (ISO 5755:2012) |
| ISO 4507:2000 | Sintered ferrous materials, carburized or carbonitrided — Determination and verification of case-hardening depth by a micro-hardness test |
| BS EN ISO 22068:2014 | Sintered-metal injection-moulded materials. Specifications |
| BS EN ISO 5755:2012 | Sintered metal materials. Specifications |
| UNI EN ISO 22068 : 2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| DIN EN ISO 4507:2007-05 | Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000) |
| BS EN ISO 4507:2007 | Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test |
| ISO 5755:2012 | Sintered metal materials — Specifications |
| ISO 22068:2012 | Sintered-metal injection-moulded materials — Specifications |
| BS EN ISO 6506-1:2014 | Metallic materials. Brinell hardness test Test method |
| EN ISO 5755:2012 | Sintered metal materials - Specifications (ISO 5755:2012) |
| EN ISO 22068:2014 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| EN ISO 4507:2007 | Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000) |
| DIN EN ISO 22068:2014-06 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| UNE-EN ISO 22068:2014 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| UNI EN ISO 5755 : 2012 | SINTERED METAL MATERIALS - SPECIFICATIONS |
| ISO 14168:2011 | Metallic powders, excluding hardmetals — Method for testing copper-base infiltrating powders |
| I.S. EN ISO 22068:2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
| DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
| BS EN ISO 6508-1:2015 | Metallic materials. Rockwell hardness test Test method |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4507:2000 | Sintered ferrous materials, carburized or carbonitrided — Determination and verification of case-hardening depth by a micro-hardness test |
| ISO 4516:2002 | Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.