ISO 4136:2012
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Destructive tests on welds in metallic materials Transverse tensile test
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
27-05-2022
Superseded by
Language(s)
English, French, Russian
Published date
05-11-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 4136:2012 specifies the sizes of test specimen and the procedure for carrying out transverse tensile tests in order to determine the tensile strength and the location of fracture of a welded butt joint.
ISO 4136:2012 applies to metallic materials in all forms of product with joints made by any fusion welding process.
Unless otherwise specified for specific points in ISO 4136:2012, the general principles of ISO 6892-1 and ISO 6892-2 apply.
| DevelopmentNote |
Supersedes ISO/DIS 4136. (11/2012)
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 4136 : 2013 | Identical |
| NF EN ISO 4136 : 2013 | Identical |
| NBN EN ISO 4136 : 2013 | Identical |
| NEN EN ISO 4136 : 2012 | Identical |
| NS EN ISO 4136 : 2012 | Identical |
| I.S. EN ISO 4136:2012 | Identical |
| PN EN ISO 4136 : 2013 | Identical |
| SN EN ISO 4136 : 2013 | Identical |
| UNI EN ISO 4136 : 2012 | Identical |
| SS-EN ISO 4136:2012 | Identical |
| IS 3600 : Part 3 : 2018 | Identical |
| UNE-EN ISO 4136:2013 | Identical |
| BS EN ISO 4136:2012 | Identical |
| EN ISO 4136:2012 | Identical |
| DIN EN ISO 4136:2013-02 | Identical |
| GOST R ISO 4136 : 2009 | Identical |
| DIN EN 895:1999-05 | Identical |
| BIS IS 3600-3 : 2009 | Identical |
| BS 709:1983 | Similar to |
| I.S. EN ISO 15614-2:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
| 17/30346738 DC : 0 | BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
| PREN 12493 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| PREN 1442 : DRAFT 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| 16/30294444 DC : 0 | BS ISO 21029-1 - CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 LITRES VOLUME - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| DIN EN ISO 15614-14:2013-12 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
| 11/30235519 DC : 0 | BS EN ISO 15614-14 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS |
| BS ISO 21009-1:2008 | Cryogenic vessels. Static vacuum-insulated vessels Part 1: Design, fabrication, inspection and tests |
| 11/30253745 DC : 0 | BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| PREN 10225-4 : DRAFT 2017 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| ISO 22991:2004 | Gas cylinders — Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) — Design and construction |
| PREN ISO 15614-13 : DRAFT 2010 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
| PREN 14140 : DRAFT 2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| I.S. EN 12493:2013 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| I.S. EN ISO 15792-2:2008 | WELDING CONSUMABLES - TEST METHODS - PART 2: PREPARATION OF SINGLE-RUN AND TWO-RUN TECHNIQUE TEST SPECIMENS IN STEEL |
| BS ISO 20421-1:2006 | Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing |
| 17/30362892 DC : 0 | BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| I.S. EN 13445-4:2014 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| BS EN 13480-8:2017 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 13480-8:2017+A1:2019 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 4678:2011 | Aerospace series. Weldments and brazements for aerospace structures. Joints of metallic materials by laser beam welding. Quality of weldments |
| BS EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings |
| DIN EN 14893:2014-09 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| ONORM EN 13445-5 : 2015 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
| EN ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| EN 13110:2012+A1:2017 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| I.S. EN ISO 15614-1:2017 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS (ISO 15614-1:2017, CORRECTED VERSION 2017-10-01) |
| 13/30248693 DC : 0 | BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| 14/30300966 DC : 0 | BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| BS EN ISO 15792-2:2008 | Welding consumables. Test methods Preparation of single-run and two-run technique test specimens in steel |
| BS EN ISO 25239-4:2011 | Friction stir welding. Aluminium Specification and qualification of welding procedures |
| NF EN ISO 25239-5 : 2012 | FRICTION STIR WELDING - ALUMINIUM - PART 5: QUALITY AND INSPECTION REQUIREMENTS |
| PREN 10253-4 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.) |
| 13/30266359 DC : 0 | BS EN ISO 15614-1 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS |
| DIN EN 14893 E : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| UNE-EN 13445-5:2015 | Unfired pressure vessels - Part 5: Inspection and testing |
| BS ISO 11513:2011 | Gas cylinders. Refillable welded steel cylinders containing materials for subatmospheric gas packaging (excluding acetylene). Design, construction, testing, use and periodic inspection |
| BS ISO 20421-1:2019 | Cryogenic vessels. Large transportable vacuum-insulated vessels Design, fabrication, inspection and testing |
| UNE-EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
| NF EN ISO 25239-4 : 2012 | FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES |
| UNI EN ISO 15614-14 : 2013 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS |
| BS EN ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| EN 13445-4 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| DIN EN ISO 15614-13:2012-10 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| DIN EN 1442:2008-04 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| DIN EN ISO 15614-2:2005-07 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005); German version EN ISO 15614-2:2005 |
| BS EN 286-2:1992 | Simple unfired pressure vessels designed to contain air or nitrogen Specification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
| ONORM EN 12493 : 2015 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| ONORM EN ISO 25239-4 : 2012 | FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES (ISO 25239-4:2011) |
| I.S. EN 14140:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| I.S. EN 1442:2017 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| DIN EN 13110:2017-05 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| ONORM EN ISO 15792-2 : 2008 | WELDING CONSUMABLES - TEST METHODS - PART 2: PREPARATION OF SINGLE-RUN AND TWO-RUN TECHNIQUE TEST SPECIMENS IN STEEL |
| I.S. EN 13480-8:2017&LC:2019 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| I.S. EN 14893:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| ONORM EN ISO 25239-5 : 2012 | FRICTION STIR WELDING - ALUMINIUM - PART 5: QUALITY AND INSPECTION REQUIREMENTS (ISO 25239-5:2011) |
| DIN EN ISO 11970:2016-08 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS (ISO 11970:2016) |
| I.S. EN ISO 15614-13:2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
| I.S. EN ISO 11970:2016 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS (ISO 11970:2016) |
| I.S. EN 764-4:2014 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| DIN EN 12493:2017-01 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| UNI EN 12493 : 2014 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| KTA 3407 : 2014 | PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL |
| 12/30260023 DC : 0 | BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| BS ISO 21172-1:2015 | Gas cylinders. Welded steel pressure drums up to 3 000 litres capacity for the transport of gases. Design and construction Capacities up to 1 000 litres |
| 13/30266592 DC : 0 | BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| 00/708223 DC : DRAFT MAY 2000 | BS EN ISO 15614-9 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 9: UNDERWATER HYPERBARIC WET WELDING |
| UNI EN ISO 25239-4 : 2012 | FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES |
| 18/30350515 DC : 0 | BS ISO 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
| 09/30196132 DC : 0 | BS ISO 11513 - GAS CYLINDERS - REFILLABLE WELDED STEEL CYLINDERS CONTAINING ABSORBENT MATERIAL FOR SUB-ATMOSPHERIC GAS PACKAGING - DESIGN, CONSTRUCTION AND TESTING |
| 07/30171123 DC : DRAFT AUG 2007 | BS EN ISO 25239-5 - FRICTION STIR WELDING - ALUMINIUM - PART 5: QUALITY AND INSPECTION REQUIREMENTS |
| 12/30248681 DC : 0 | BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| 10/30217417 DC : 0 | BS EN ISO 15614-13 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| 04/102437 DC : DRAFT JAN 2004 | ISO 21029-1 - CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 L - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| DIN EN ISO 25239-5:2012-03 | FRICTION STIR WELDING - ALUMINIUM - PART 5: QUALITY AND INSPECTION REQUIREMENTS (ISO 25239-5:2011) |
| 16/30336547 DC : 0 | BS EN 16602-70-39 - SPACE PRODUCT ASSURANCE - PART 70-39: WELDING OF METALLIC MATERIALS FOR FLIGHT HARDWARE |
| 17/30346735 DC : 0 | BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
| ISO 4706:2008 | Gas cylinders — Refillable welded steel cylinders — Test pressure 60 bar and below |
| I.S. EN 13110:2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| I.S. EN 13445-5:2014 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
| EN 13445-5 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| I.S. EN ISO 25239-5:2011 | FRICTION STIR WELDING - ALUMINIUM - PART 5: QUALITY AND INSPECTION REQUIREMENTS (ISO 25239-5:2011) |
| PREN 13480-8 : DRAFT 2012 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| ISO 21029-1:2018 | Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests |
| PREN 12542 : DRAFT 2016 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| UNI EN ISO 15792-2 : 2009 | WELDING CONSUMABLES - TEST METHODS - PART 2: PREPARATION OF SINGLE-RUN AND TWO-RUN TECHNIQUE TEST SPECIMENS IN STEEL |
| BS EN 14025 : 2013 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| EN 14025:2013+A1:2016 | Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction |
| DIN EN 13110:2012-07 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| DIN EN ISO 15792-2:2008-08 | WELDING CONSUMABLES - TEST METHODS - PART 2: PREPARATION OF SINGLE-RUN AND TWO-RUN TECHNIQUE TEST SPECIMENS IN STEEL |
| DIN EN 14140:2015-03 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| UNE-EN 764-4:2015 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| EN ISO 25239-5:2011 | Friction stir welding - Aluminium - Part 5: Quality and inspection requirements (ISO 25239-5:2011) |
| UNE-EN 13445-4:2015 | Unfired pressure vessels - Part 4: Fabrication |
| EN ISO 15792-2:2008 | Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel (ISO 15792-2:2000) |
| EN ISO 25239-4:2011 | Friction stir welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 25239-4:2011) |
| UNI EN ISO 15614-5 : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 5: ARC WELDING OF TITANIUM, ZIRCONIUM AND THEIR ALLOYS |
| UNI EN 4678 : 2012 | AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
| UNI EN ISO 15614-2 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
| UNI EN 14893 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| UNI EN 14140 : 2015 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| ONORM EN ISO 15614-13 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
| UNI EN 14163 : 2003 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - WELDING OF PIPELINES |
| BS ISO 20826:2006 | Automotive LPG components. Containers |
| UNI EN ISO 25239-5 : 2012 | FRICTION STIR WELDING - ALUMINIUM - PART 5: QUALITY AND INSPECTION REQUIREMENTS |
| 13/30264471 DC : 0 | BS ISO 21172-1 - GAS CYLINDERS - WELDED STEEL PRESSURE DRUMS UP TO 3000 LITRES CAPACITY FOR THE TRANSPORT OF GASES - DESIGN AND CONSTRUCTION - PART 1: CAPACITIES UP TO 1000 LITRES |
| 04/30115844 DC : DRAFT JUNE 2004 | ISO/DIS 20421-1 - CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTING |
| 00/715332 DC : DRAFT OCT 2000 | ISO/CD 12151-6 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS |
| PREN 12972 : DRAFT 2017 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| BS EN ISO 15614-14:2013 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Laser-arc hybrid welding of steels, nickel and nickel alloys |
| 06/30153331 DC : DRAFT JULY 2006 | BS ISO 21009-1 - CRYOGENIC VESSELS - STATIC VACUUM-INSULATED VESSELS - PART 1: DESIGN, FABRICATION, INSPECTION AND TESTS |
| BS EN 13445-5 : 2014 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
| I.S. EN ISO 25239-4:2011 | FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES (ISO 25239-4:2011) |
| ISO 13847:2013 | Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines |
| ISO 21172-1:2015 | Gas cylinders Welded steel pressure drums up to 3 000 litres capacity for the transport of gases Design and construction Part 1: Capacities up to 1 000 litres |
| UNE-EN ISO 15614-1:2018 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017, Corrected version 2017-10-01) |
| 17/30360691 DC : 0 | BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| 16/30326248 DC : 0 | BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| DIN EN 12493:2014-03 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| PREN 14893 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| ISO 20826:2006 | Automotive LPG components Containers |
| ISO 11513:2011 | Gas cylinders Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene) Design, construction, testing, use and periodic inspection |
| UNI EN 13445-5 : 2015 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
| ISO 20421-1:2006 | Cryogenic vessels Large transportable vacuum-insulated vessels Part 1: Design, fabrication, inspection and testing |
| UNE-EN 14140:2015 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction |
| ISO 25239-5:2011 | Friction stir welding Aluminium Part 5: Quality and inspection requirements |
| BS EN 14163:2001 | Petroleum and natural gas industries. Pipeline transportation systems. Welding of pipelines |
| ISO 15614-14:2013 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys |
| BS EN ISO 15614-11:2002 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Electron and laser beam welding |
| ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding |
| ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 6: Arc and gas welding of copper and its alloys |
| BS EN 14140:2014 | LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction |
| BS EN 764-4:2014 | Pressure equipment Establishment of technical delivery conditions for metallic materials |
| UNE-EN ISO 15614-13:2013 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings |
| BS EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc welding of aluminium and its alloys |
| UNE-EN 13110:2012 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| UNE-EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
| UNE-EN 14025:2014 | Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction |
| BS EN 1442 : 2006 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| ISO 25239-4:2011 | Friction stir welding Aluminium Part 4: Specification and qualification of welding procedures |
| ISO 15792-2:2000 | Welding consumables Test methods Part 2: Preparation of single-run and two-run technique test specimens in steel |
| UNE-EN 13110:2012+A1:2017 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
| EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
| EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| EN 4678:2011 | Aerospace series - Weldments and brazements for aerospace structures - Joints of metallic materials by laser beam welding - Quality of weldments |
| EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
| EN ISO 15614-14:2013 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013) |
| EN ISO 15614-11:2002 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
| EN ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
| EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| BS EN ISO 25239-5:2011 | Friction stir welding. Aluminium Quality and inspection requirements |
| UNE-EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| BS EN 12493 : 2013 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| 15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| 07/30171119 DC : DRAFT AUG 2007 | BS EN ISO 25239-4 - FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES |
| DIN EN ISO 25239-4:2012-03 | FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES (ISO 25239-4:2011) |
| 17/30346741 DC : 0 | BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
| 06/30081895 DC : DRAFT MAY 2006 | ISO 4706 - GAS CYLINDERS - REFILLABLE WELDED STEEL CYLINDERS - PART 1: TEST PRESSURE 60 BAR AND BELOW |
| BS ISO 4706:2008 | Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below |
| ISO 21009-1:2008 | Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests |
| I.S. EN 14025:2013 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION |
| UNE-EN 12493:2014 | LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture |
| UNE-EN ISO 15614-14:2014 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 14: Laser-arc hybrid welding of steels, nickel and nickel alloys (ISO 15614-14:2013) |
| I.S. EN ISO 15614-14:2013 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 14: LASER-ARC HYBRID WELDING OF STEELS, NICKEL AND NICKEL ALLOYS (ISO 15614-14:2013) |
| 17/30346732 DC : 0 | BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| I.S. EN 4678:2011 | AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS |
| DIN EN 764-4:2015-03 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| BS EN 13445-4 : 2014 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| BS EN ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc and gas welding of copper and its alloys |
| BS EN 14893:2014 | LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| BS EN ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Upset (resistance butt) and flash welding |
| BS EN 13110 : 2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| DIN EN ISO 15614-6:2007-01 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006) |
| DIN EN 14140:2017-01 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| UNI EN ISO 15614-13 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.