ISO 4135:2001
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Anaesthetic and respiratory equipment Vocabulary
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
19-01-2022
Superseded by
Language(s)
English, English - French
Published date
02-08-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DevelopmentNote |
Supersedes ISO/FDIS 4135 (09/2001) Supersedes ASTM F 2002 (01/2006)
|
| DocumentType |
Standard
|
| Pages |
72
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| AAMI ISO 4135 : 2001 | Identical |
| NF EN ISO 4135 : 2001 | Identical |
| NBN EN ISO 4135 : 2001 | Identical |
| NEN EN ISO 4135 : 2001 | Identical |
| NS EN ISO 4135 : 2ED 2001 | Identical |
| I.S. EN ISO 4135:2002 | Identical |
| PN EN ISO 4135 : 2006 | Identical |
| SAC GB/T 4999 : 2003 | Identical |
| SN EN ISO 4135 : 1997 | Identical |
| UNI EN ISO 4135 : 2002 | Identical |
| SS-EN ISO 4135:2001 | Identical |
| UNE-EN ISO 4135:2002 | Identical |
| BIS IS 13200 : 2015(R2015) | Identical |
| BS EN ISO 4135:2001 | Identical |
| EN ISO 4135:2001 | Identical |
| DIN EN ISO 4135:2002-03 | Identical |
| DIN EN ISO 10524-4:2008-09 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
| 17/30337954 DC : 0 | BS ISO 19211 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - FIRE-ACTIVATED OXYGEN SHUT-OFF DEVICES FOR USE DURING OXYGEN THERAPY |
| CSA Z8835.3 : 2008 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| BS EN ISO 80601-2-13:2012 | Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| I.S. EN ISO 5364:2016 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - OROPHARYNGEAL AIRWAYS (ISO 5364:2016) |
| 04/30084857 DC : DRAFT JUN 2004 | BS EN ISO 10524-1 - PRESSURE REGULATORS FOR USE WITH MEDICAL GAS SYSTEMS - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| 17/30303091 DC : 0 | BS EN ISO 10524-2 - PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
| DD ISO/TS 18835:2004 | Inhalational anaesthesia systems. Draw-over vaporizers and associated equipment |
| CSA Z10524-1 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| I.S. EN ISO 8835-4:2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 4: ANAESTHETIC VAPOUR DELIVERY DEVICES |
| CSA ISO 5356-1 : 2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS |
| 01/560793 DC : DRAFT FEB 2001 | IEC/DIS 60601-2-13 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY OF ANAESTHETIC SYSTEMS |
| 09/30203808 DC : 0 | BS EN ISO 80601-2-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| 17/30303094 DC : 0 | BS EN ISO 10524-3 - PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| 05/30129368 DC : DRAFT AUG 2005 | ISO 9170-2 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| DIN EN ISO 8835-3:2011-02 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| ISO 8835-7:2011 | Inhalational anaesthesia systems — Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases |
| BS EN 60601-2-13:2006 | Medical electrical equipment Particular requirements for the safety and essential performance of anaesthetic systems |
| 05/30128373 DC : DRAFT JAN 2005 | ISO 7396-2 - MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS - BASIC REQUIREMENTS |
| BS 7213:1989 | Specification for suction catheters for use in the respiratory tract |
| 05/30129374 DC : 0 | ISO 15002 - FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| CSA Z10651-4 : 2008 | LUNG VENTILATORS - PART 4: PARTICULAR REQUIREMENTS FOR OPERATOR-POWERED RESUSCITATORS |
| CSA ISO 11712 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - SUPRALARYNGEAL AIRWAYS AND CONNECTORS |
| CSA Z10651.6 : 2006 : R2015 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES |
| CSA Z5356-1 : 2008 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS |
| CSA Z5356-1 : 2008 : R2013 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS |
| CSA Z18778 : 2008 : R2018 | RESPIRATORY EQUIPMENT - INFANT MONITORS - PARTICULAR REQUIREMENTS |
| 04/30088362 DC : DRAFT NOV 2004 | ISO 10651-5 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY VENTILATORS |
| ASTM F 2726 : 2008 | Standard specification for fixation devices for tracheal tubes and other airway devices |
| CSA Z10083 : 2008 | OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS |
| 07/30146703 DC : 0 | BS EN ISO 7376 - ANAESTHETIC AND RESPIRATORY EQUIPMENT. LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| CAN/CSA-C22.2 NO. 80601-2-67:17 | Medical electrical equipment — Part 2-67: Particular requirements for basic safety and essential performance of oxygen conserving equipment (Adopted ISO 80601-2-67:2014, first edition, 2014-06-01, with Canadian deviations) |
| DIN EN ISO 10524-1:2006-05 | PRESSURE REGULATORS FOR USE WITH MEDICAL GAS - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| CSA Z5356-2 : 2008 : R2018 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 2: SCREW-THREADED WEIGHT-BEARING CONNECTORS |
| ISO 5356-2:2012 | Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors |
| BS EN ISO 18082 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - DIMENSIONS OF NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES (ISO 18082:2014) |
| UNE-EN ISO 80601-2-69:2015 | Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014) |
| DIN EN ISO 8836:2015-02 | Suction catheters for use in the respiratory tract (ISO 8836:2014); German version EN ISO 8836:2014 |
| AAMI ISO 5361 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| BS EN ISO 7396-1:2016 | Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum |
| I.S. EN ISO 10524-4:2008 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOWPRESSURE REGULATORS |
| BS EN ISO 80601-2-12:2011 | Medical electrical equipment Particular requirements for basic safety and essential performance of critical care ventilators |
| ISO 6707-3:2017 | Buildings and civil engineering works — Vocabulary — Part 3: Sustainability terms |
| ISO 17510:2015 | Medical devices — Sleep apnoea breathing therapy — Masks and application accessories |
| ISO/TS 18835:2004 | Inhalational anaesthesia systems Draw-over vaporizers and associated equipment |
| CSA ISO 5362 : 2014 | ANAESTHETIC RESERVOIR BAGS |
| ISO 80601-2-74:2017 | Medical electrical equipment Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment |
| ASTM F 1101 : 1990 : R1996 | Standard Specification for Ventilators Intended for Use During Anesthesia |
| ISO 10083:2006 | Oxygen concentrator supply systems for use with medical gas pipeline systems |
| ASTM F 1452 : 2001 | Standard Specification for Minimum Performance and Safety Requirements for Anesthetic Gas Monitors |
| ISO 10524-3:2005 | Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves |
| ASTM F 920 : 1993 : R1999 | Standard Specification for Minimum Performance and Safety Requirements for Resuscitators Intended for Use With Humans (Withdrawn 2007) |
| BS EN ISO 80601-2-13:2012+A2:2019 | Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| DIN EN ISO 7376:2010-01 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| UNE-EN ISO 21969:2010 | High-pressure flexible connections for use with medical gas systems (ISO 21969:2009) |
| BS EN 1782 : 1998 | TRACHEAL TUBES AND CONNECTORS |
| ISO 10524-4:2008 | Pressure regulators for use with medical gases — Part 4: Low-pressure regulators |
| ISO 8835-5:2004 | Inhalational anaesthesia systems Part 5: Anaesthetic ventilators |
| ISO 10651-4:2002 | Lung ventilators — Part 4: Particular requirements for operator-powered resuscitators |
| UNE-EN ISO 14408:2016 | Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information (ISO 14408:2016) |
| BS EN ISO 15001:2011 | Anaesthetic and respiratory equipment. Compatibility with oxygen |
| BS EN 12342 : 1998 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| BS EN ISO 7376 : 2009-08 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| DIN EN 1733:2003-02 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| DIN EN 12342:1998-09 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| DIN EN 12342:2010-01 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| I.S. EN ISO 10651-4:2009 | LUNG VENTILATORS - PART 4: PARTICULAR REQUIREMENTS FOR OPERATOR-POWERED RESUSCITATORS |
| I.S. EN ISO 18777:2009 | TRANSPORTABLE LIQUID OXYGEN SYSTEMS FOR MEDICAL USE - PARTICULAR REQUIREMENTS |
| UNI EN ISO 9170-1 : 2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| DIN EN ISO 10524-2:2006-07 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
| BS 6153:1987 | Specification for oropharyngeal airways |
| BS 3487-1:1989 | Tracheal tubes Specification for all types of tubes |
| EN 1282-2:2005+A1:2009 | Tracheostomy tubes - Part 2: Paediatric tubes (ISO 5366-3:2001, modified) |
| EN ISO 5364:2016 | Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2016) |
| EN ISO 5366:2016 | Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors (ISO 5366:2016) |
| EN ISO 15002:2008 | Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008) |
| EN 12181:1998 | Oropharyngeal airways |
| EN ISO 80601-2-13:2012 | Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011) |
| EN ISO 5366-1:2009 | Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors for use in adults (ISO 5366-1:2000) |
| EN ISO 5356-1:2015 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015) |
| EN 13544-1:2007+A1:2009 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| BS EN ISO 15002:2008 | Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| CSA Z10524-2 : 2012 : R2017 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
| CSA Z10524-2 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
| CSA Z168.5.1 : 1997 | ANAESTHESIA VENTILATORS |
| 17/30338753 DC : 0 | BS ISO 80601-2-79 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-79: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF VENTILATORY SUPPORT EQUIPMENT FOR VENTILATORY IMPAIRMENT |
| BS EN ISO 80601-2-72:2015 | Medical electrical equipment Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| BS ISO 15001 : 2003 AMD 15145 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN |
| BS EN ISO 5359 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
| BS EN ISO 8836:2014 | Suction catheters for use in the respiratory tract |
| CSA Z9170.2 : 0 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| UNI EN ISO 7376 : 2009-10 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| DIN EN ISO 80601-2-72:2016-04 | Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015) |
| 03/106945 DC : DRAFT APR 2003 | BS EN ISO 14408 - TRACHEAL TUBES DESIGNED FOR LASER SURGERY - REQUIREMENTS FOR MARKING AND ACCOMPANYING INFORMATION |
| 03/114562 DC : DRAFT SEP 2003 | BS EN ISO 18777 - TRANSPORTABLE LIQUID OXYGEN SYSTEMS FOR MEDICAL USE - PARTICULAR REQUIREMENTS |
| 04/30109833 DC : 0 | ISO 8836 - SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| 02/564924 DC : DRAFT NOV 2002 | ISO 21647 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS |
| DIN EN ISO 15002:2008-11 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| UNI EN ISO 80601-2-12 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| 15/30280904 DC : 0 | BS ISO 18190 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - GENERAL REQUIREMENTS FOR AIRWAYS AND RELATED EQUIPMENT |
| 12/30259708 DC : 0 | BS EN ISO 5356-1 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS (ISO/DIS 5356-1:2012) |
| CAN/CSA-Z15002:12 (R2017) | Flow-metering devices for connection to terminal units of medical gas pipeline systems (Adopted ISO 15002:2008, second edition, 2008-07-01, with Canadian deviations) |
| 14/30281863 DC : 0 | BS EN ISO 5364 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - OROPHARYNGEAL AIRWAYS |
| 05/30129363 DC : DRAFT AUG 2005 | ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| CSA Z1500:2012 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| PREN ISO 5356-1 : DRAFT 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS (ISO/DIS 5356-1:2012) |
| BS 5724-2.204(1999) : 1999 | ANAESTHETIC WORKSTATIONS AND THEIR MODULES - PARTICULAR REQUIREMENTS |
| CSA Z5356-2 : 2008 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 2: SCREW-THREADED WEIGHT-BEARING CONNECTORS |
| 03/111581 DC : DRAFT JULY 2003 | BS EN ISO 18778 - INFANT MONITORS - PARTICULAR REQUIREMENTS |
| 17/30311331 DC : 0 | BS EN ISO 10524-1 - PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| CSA ISO 16628 : 2014 | TRACHEOBRONCHIAL TUBES - SIZING AND MARKING |
| CSA Z8836 :2011 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| CSA Z5356-2 : 2008 : R2013 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 2: SCREW-THREADED WEIGHT-BEARING CONNECTORS |
| CAN/CSA-C22.2 NO. 80601-2-72:17 | Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (Adopted ISO 80601-2-72:2015, first edition, 2015-09-01, with Canadian deviations) |
| ISO 11712:2009 | Anaesthetic and respiratory equipment — Supralaryngeal airways and connectors |
| I.S. EN 60601-2-13:2006 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS |
| AAMI ISO 5367 : 2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS |
| AAMI ISO 14408 : 2005 | TRACHEAL TUBES DESIGNED FOR LASER SURGERY - REQUIREMENTS FOR MARKING AND ACCOMPANYING INFORMATION |
| AAMI ISO 8836 : 2015 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| CSA ISO 11712:14 (R2019) | Anaesthetic and respiratory equipment - Supralaryngeal airways and connectors (Adopted ISO 11712:2009, first edition, 2009-05-15) |
| CSA C22.2 No. 80601-2-69 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT |
| NF EN 60601 2-13 : 2007 AMD 1 2007 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS |
| CSA Z17510.2 : 2009 | SLEEP APNOEA BREATHING THERAPY - PART 2: MASKS AND APPLICATION ACCESSORIES |
| BS EN ISO 5367:2014 | Anaesthetic and respiratory equipment. Breathing sets and connectors |
| UNE-EN ISO 5367:2015 | Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014) |
| CSA C22.2 No. 80601-2-12 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| EN ISO 5356-2:2012 | Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:2012) |
| UNI EN ISO 10524-3 : 2013 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| EN ISO 10524-2:2006 | Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005) |
| ASTM F 2002 : 2001 : REV A | Standard Terminology Relating to Anesthesia and Respiratory Equipment |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| ISO 8836:2014 | Suction catheters for use in the respiratory tract |
| ISO 5367:2014 | Anaesthetic and respiratory equipment — Breathing sets and connectors |
| DIN EN ISO 8835-4:2009-07 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 4: ANAESTHETIC VAPOUR DELIVERY DEVICES |
| DIN EN ISO 17510-2:2009-07 | SLEEP APNOEA BREATHING THERAPY - PART 2: MASKS AND APPLICATION ACCESSORIES |
| DIN EN ISO 8835-2:2009-08 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS |
| DIN EN 1782:2009-12 | TRACHEAL TUBES AND CONNECTORS |
| DIN EN ISO 5356-2:2013-03 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 2: SCREW-THREADED WEIGHT-BEARING CONNECTORS (ISO 5356-2:2012) |
| DIN EN ISO 17510-1:2009-07 | Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment (ISO 17510-1:2007) |
| DIN EN ISO 18778:2009-08 | Respiratory equipment - Infant monitors - Particular requirements (ISO 18778:2005) |
| DIN EN ISO 18777:2009-07 | TRANSPORTABLE LIQUID OXYGEN SYSTEMS FOR MEDICAL USE - PARTICULAR REQUIREMENTS |
| DIN EN ISO 14408:2016-07 | TRACHEAL TUBES DESIGNED FOR LASER SURGERY - REQUIREMENTS FOR MARKING AND ACCOMPANYING INFORMATION (ISO 14408:2016) |
| UNE-EN ISO 80601-2-13:2013 | Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011) |
| BS EN ISO 8835-2:2009 | Inhalational anaesthesia systems Anaesthetic breathing systems (ISO 8835-2:2007) |
| ISO 15225:2016 | Medical devices Quality management Medical device nomenclature data structure |
| BS EN ISO 10651-4:2002 | Lung ventilators Particular requirements for operator-powered resuscitators |
| BS EN ISO 9360-1:2009 | Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans HMEs for use with minimal tidal volumes of 250 ml |
| I.S. EN ISO 5366-1:2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 1: TUBES AND CONNECTORS FOR USE IN ADULTS |
| I.S. EN ISO 5356-1:2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS (ISO 5356-1:2015) |
| I.S. EN ISO 17510-1:2009 | SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT |
| I.S. EN ISO 18778:2009 | RESPIRATORY EQUIPMENT - INFANT MONITORS - PARTICULAR REQUIREMENTS |
| EN ISO 17510-1:2009 | Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment (ISO 17510-1:2007) |
| I.S. EN ISO 17510-2:2009 | SLEEP APNOEA BREATHING THERAPY - PART 2: MASKS AND APPLICATION ACCESSORIES |
| I.S. EN ISO 15001:2011 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN (ISO 15001:2010) |
| DIN EN 1820:2009-12 | ANAESTHETIC RESERVOIR BAGS |
| I.S. EN 794-3:1998 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| I.S. EN ISO 8185:2009 | RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS |
| DIN EN ISO 5366:2017-04 | Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors (ISO 5366:2016); German version EN ISO 5366:2016 |
| I.S. EN ISO 9360-1:2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART 1: HMES FOR USE WITH MINIMUM TIDAL VOLUMES OF 250 ML |
| I.S. EN ISO 9360-2:2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART 2: HMES FOR USE WITH TRACHEOSTOMIZED PATIENTS HAVING MINIMUM TIDAL VOLUMES OF 250 ML |
| I.S. EN ISO 14408:2016 | TRACHEAL TUBES DESIGNED FOR LASER SURGERY - REQUIREMENTS FOR MARKING AND ACCOMPANYING INFORMATION (ISO 14408:2016) |
| DIN EN ISO 10651-2:2011-06 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| I.S. EN ISO 21969:2009 | HIGH-PRESSURE FLEXIBLE CONNECTIONS FOR USE WITH MEDICAL GAS SYSTEMS |
| I.S. EN 1282-2:2005 | TRACHEOSTOMY TUBES - PART 2: PAEDIATRIC TUBES |
| I.S. EN ISO 18779:2005 | MEDICAL DEVICES FOR CONSERVING OXYGEN AND OXYGEN MIXTURES - PARTICULAR REQUIREMENTS |
| DIN EN ISO 5366-1:2009-07 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 1: TUBES AND CONNECTORS FOR USE IN ADULTS |
| UNI EN 794-3 : 2009 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| UNI EN ISO 9170-2 : 2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| 17/30356316 DC : 0 | BS ISO 17256 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - RESPIRATORY THERAPY TUBING AND CONNECTORS |
| DIN EN ISO 5366:2015-10 (Draft) | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES AND CONNECTORS (ISO 5366:2016) |
| I.S. EN ISO 18082:2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - DIMENSIONS OF NON-INTERCHANGEABLE SCREW-THREADED (NIST) LOW-PRESSURE CONNECTORS FOR MEDICAL GASES (ISO 18082:2014/AMD 1:2017) |
| ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
| CSA Z10524-1 : 2012 : R2017 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| 13/30260084 DC : 0 | BS ISO 17256 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - RESPIRATORY THERAPY TUBING AND CONNECTORS |
| NF EN ISO 8835-3 : 2009 AMD 1 2011 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| 05/30138123 DC : DRAFT AUG 2005 | BS ISO 8836 - SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| BS ISO 11712:2009 | Anaesthetic and respiratory equipment. Supralaryngeal airways and connectors |
| I.S. EN ISO 8835-2:2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS |
| I.S. EN 12181:1998 | OROPHARYNGEAL AIRWAYS |
| AAMI ISO 10651-5 : 2006 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| BS ISO 18190:2016 | Anaesthetic and respiratory equipment. General requirements for airways and related equipment |
| BS EN ISO 5364:2016 | Anaesthetic and respiratory equipment. Oropharyngeal airways |
| UNI EN ISO 5367 : 2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS |
| CAN/CSA-ISO 5364:16 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - OROPHARYNGEAL AIRWAYS |
| UNI EN ISO 80601-2-69 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT |
| BS EN ISO 80601-2-69:2014 | Medical electrical equipment Particular requirements for basic safety and essential performance of oxygen concentrator equipment |
| UNE-EN ISO 5364:2017 | Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2016) |
| 13/30255929 DC : 0 | BS EN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| 04/30088533 DC : DRAFT MARCH 2004 | BS EN ISO 8185 - RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS |
| BS EN 60601-2-12:2006 | Medical electrical equipment Particular requirements for the safety of lung ventilators. Critical care ventilators |
| AAMI ISO 15225 : 2016 | MEDICAL DEVICES - QUALITY MANAGEMENT - MEDICAL DEVICE NOMENCLATURE DATA STRUCTURE |
| BS ISO 10651-5:2006 | Lung ventilators for medical use. Particular requirements for basic safety and essential performance Gas-powered emergency resuscitators |
| BS EN ISO 9170-2:2008 | Terminal units for medical gas pipeline systems Terminal units for anaesthetic gas scavenging systems |
| 02/563295 DC : DRAFT AUG 2002 | BS EN ISO 5356-1 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS |
| 04/30099768 DC : DRAFT DEC 2004 | PREN ISO 8835-3 - INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: ANAESTHETIC GAS SCAVENGING SYSTEMS - TRANSFER AND RECEIVING SYSTEMS |
| CSA Z18779 : 2008 : R2013 | MEDICAL DEVICES FOR CONSERVING OXYGEN AND OXYGEN MIXTURES - PARTICULAR REQUIREMENTS |
| CSA Z8836 : 2011 : FR | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| UNI EN ISO 8836 : 2015 | A SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| 03/103294 DC : DRAFT JAN 2003 | BS EN ISO 10651-6 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME CARE VENTILATORY SUPPORT DEVICES |
| UNE-EN ISO 8836:2015 | Suction catheters for use in the respiratory tract (ISO 8836:2014) |
| CSA Z10524-4 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
| CSA Z10651-4 : 2008 : R2013 | LUNG VENTILATORS - PART 4: PARTICULAR REQUIREMENTS FOR OPERATOR-POWERED RESUSCITATORS |
| CSA Z10651.6 : 2006 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES |
| CSA Z18778 :2008 | RESPIRATORY EQUIPMENT - INFANT MONITORS - PARTICULAR REQUIREMENTS |
| CAN/CSA-Z7376:12 (R2017) | Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation (Adopted ISO 7376:2009, second edition, 2009-08-15, with Canadian deviations) |
| CSA Z8836 : 2011 : R2015 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| I.S. EN ISO 5361:2016 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS (ISO/DIS 5361:2014) |
| CEI EN 60601-2-12 : 2007 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS |
| AAMI ISO 5356-1 : 2004 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS |
| I.S. EN ISO 10524-1:2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
| UNI EN ISO 5361 : 2013 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| BS EN ISO 10524-1:2006 | Pressure regulators for use with medical gases Pressure regulators and pressure regulators with flow-metering devices |
| CSA Z5359 : 2016 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES, MEDICAL VACUUM, MEDICAL SUPPORT GASES, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
| I.S. EN ISO 9170-2:2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| DIN EN ISO 7396-1:2016-09 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| CSA Z7396.2 : 2002 | MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS |
| I.S. EN ISO 80601-2-13:2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011) |
| AAMI ISO 5362 : 2006 | ANAESTHETIC RESERVOIR BAGS |
| ASTM F 2002 : 2001 | Standard Terminology Relating to Anesthesia and Respiratory Equipment |
| UNI EN ISO 5364 : 2011 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - OROPHARYNGEAL AIRWAYS |
| ASTM F 1101 : 1990 : R2003 : EDT 1 | Standard Specification for Ventilators Intended for Use During Anesthesia (Withdrawn 2012) |
| ASTM F 1690 : 1996 : R2004 | Standard Specification for Humidifiers for Medical Use—Part 1: General Requirements for Active Humidification Systems (Withdrawn 2013) |
| CSA Z8835.2 : 2008 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS FOR ADULTS |
| ASTM F 1456 : 2001 | Standard Specification for Minimum Performance and Safety Requirements for Capnometers |
| ASTM F 2002 : 2001 : REV B | Standard Terminology Relating to Anesthesia and Respiratory Equipment |
| EN ISO 10524-1:2006 | Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006) |
| BS EN ISO 10524-2:2006 | Pressure regulators for use with medical gases Manifold and line pressure regulators |
| ISO 15002:2008 | Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| I.S. EN ISO 8836:2014 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014) |
| DIN EN ISO 5356-1:2015-06 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS (ISO 5356-1:2015) |
| DIN EN ISO 10651-6:2011-06 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES |
| DIN EN ISO 10651-4:2009-08 | Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002) |
| DIN EN 13544-1:2009-12 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| DIN EN ISO 15001:2012-06 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| DIN EN ISO 19054:2006-09 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005 + AMD1:2016) |
| ISO 18779:2005 | Medical devices for conserving oxygen and oxygen mixtures Particular requirements |
| ISO 8835-2:2007 | Inhalational anaesthesia systems Part 2: Anaesthetic breathing systems |
| ISO 8835-3:2007 | Inhalational anaesthesia systems Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems |
| ISO 9360-2:2001 | Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml |
| BS EN ISO 11196:1997 | Anaesthetic gas monitors |
| ISO 10651-2:2004 | Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 2: Home care ventilators for ventilator-dependent patients |
| ISO 5364:2016 | Anaesthetic and respiratory equipment — Oropharyngeal airways |
| ISO 80601-2-69:2014 | Medical electrical equipment Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment |
| BS EN ISO 21969:2009 | High-pressure flexible connections for use with medical gas systems |
| EN ISO 9170-1:2008 | Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2008) |
| EN ISO 7376:2009 | Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation (ISO 7376:2009) |
| I.S. EN ISO 7376:2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| EN ISO 80601-2-69:2014 | Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014) |
| I.S. EN ISO 15225:2016 | MEDICAL DEVICES - QUALITY MANAGEMENT - MEDICAL DEVICE NOMENCLATURE DATA STRUCTURE (ISO 15225:2016) |
| UNE-EN 1282-2:2006 | Tracheostomy tubes - Part 2: Paediatric tubes (ISO 5366-3:2001, modified) |
| UNE-EN ISO 15225:2016 | Medical devices - Quality management - Medical device nomenclature data structure (ISO 15225:2016) |
| I.S. EN 13544-1:2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| EN ISO 8836:2014 | Suction catheters for use in the respiratory tract (ISO 8836:2014) |
| I.S. EN 1820:2005 | ANAESTHETIC RESERVOIR BAGS |
| EN ISO 15225:2016 | Medical devices - Quality management - Medical device nomenclature data structure (ISO 15225:2016) |
| UNE-EN 1782:1998 | TRACHEAL TUBES AND CONNECTORS. |
| UNE-EN ISO 5356-2:2013 | Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:2012) |
| CSA C22.2 No. 80601-2-12 : 2012(R2017) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| EN ISO 9360-2:2009 | Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml (ISO 9360-2:2001) |
| EN ISO 8185:2009 | Respiratory tract humidifiers for medical use - Particular requirements for respiratory humidification systems (ISO 8185:2007) |
| EN 1782:1998+A1:2009 | Tracheal tubes and connectors |
| ONORM EN 13544-3 : 2010 | RESPIRATORY THERAPY EQUIPMENT - PART 3: AIR ENTRAINMENT DEVICES |
| CSA Z8835.4 : 2006 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 4: ANAESTHETIC VAPOUR DELIVERY DEVICES |
| UNI EN ISO 10651-2 : 2009 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR- DEPENDENT PATIENTS |
| UNI EN ISO 8835-5 : 2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHETIC VENTILATORS |
| UNI EN ISO 17510-2 : 2009 | SLEEP APNOEA BREATHING THERAPY - PART 2: MASKS AND APPLICATION ACCESSORIES |
| UNI EN ISO 7396-2 : 2007 | MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS |
| UNI EN ISO 5366-1 : 2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 1: TUBES AND CONNECTORS FOR USE IN ADULTS |
| UNI EN ISO 9360-1 : 2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART 1: HMES FOR USE WITH MINIMUM TIDAL VOLUMES OF 250 ML |
| UNI EN ISO 21969 : 2010 | HIGH-PRESSURE FLEXIBLE CONNECTIONS FOR USE WITH MEDICAL GAS SYSTEMS |
| UNI EN 1282-2 : 2009 | TRACHEOSTOMY TUBES - PART 2: PAEDIATRIC TUBES |
| UNI EN ISO 18777 : 2009 | TRANSPORTABLE LIQUID OXYGEN SYSTEMS FOR MEDICAL USE - PARTICULAR REQUIREMENTS |
| UNI EN 13544-1 : 2009 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| UNI EN 12342 : 2009 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| UNI EN ISO 10651-6 : 2009 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 6: HOME-CARE VENTILATORY SUPPORT DEVICES |
| UNI EN ISO 10651-4 : 2009 | LUNG VENTILATORS - PART 4: PARTICULAR REQUIREMENTS FOR OPERATOR-POWERED RESUSCITATORS |
| UNI EN ISO 18778 : 2009 | RESPIRATORY EQUIPMENT - INFANT MONITORS - PARTICULAR REQUIREMENTS |
| UNI EN ISO 9360-2 : 2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART 2: HMES FOR USE WITH TRACHEOSTOMIZED PATIENTS HAVING MINIMUM TIDAL VOLUMES OF 250 ML |
| UNI EN 1820 : 2009 | ANAESTHETIC RESERVOIR BAGS |
| UNI EN ISO 8185 : 2009 | RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS |
| UNI EN ISO 8835-4 : 2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 4: ANAESTHETIC VAPOUR DELIVERY DEVICES |
| UNI EN 1782 : 2009 | TRACHEAL TUBES AND CONNECTORS |
| UNI EN ISO 15001 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN |
| UNE-EN ISO 5361:2017 | Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016) |
| 04/30088537 DC : DRAFT SEP 2004 | PREN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| CSA Z10524-3 : 2012 : INC : AMD 1 : 2017 : R201700 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| 03/111582 DC : DRAFT JULY 2003 | BS EN ISO 18779 - DEVICES FOR CONSERVING OXYGEN AND OXYGEN MIXTURES - PARTICULAR REQUIREMENTS |
| I.S. EN ISO 7396-2:2007 | MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS |
| BS ISO 18835:2015 | Inhalational anaesthesia systems. Draw-over anaesthetic systems |
| UNI EN ISO 8835-2 : 2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS |
| 17/30338756 DC : 0 | BS ISO 80601-2-80 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-80: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF VENTILATORY SUPPORT EQUIPMENT FOR VENTILATORY INSUFFICIENCY |
| 13/30264413 DC : 0 | BS EN ISO 80601-2-72 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| 14/30281859 DC : 0 | BS ISO 5361 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| 15/30273269 DC : 0 | BS EN ISO 5366 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART: TUBES AND CONNECTORS FOR USE IN ADULTS |
| 16/30312210 DC : 0 | BS ISO 6707-3 - BUILDINGS AND CIVIL ENGINEERING WORKS - VOCABULARY - PART 3: SUSTAINABILITY TERMS |
| CAN/CSA-C22.2 NO. 80601-2-70:17 | Medical electrical equipment — Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment (Adopted ISO 80601-2-70:2015, first edition, 2015-01 , with Canadian deviations) |
| BS ISO 14408:1998 | Tracheal tubes designed for laser surgery. Requirements for marking and accompanying information |
| BS ISO 8835-2:1999 | Inhalational anaesthesia systems Anaesthetic breathing systems for adults |
| BS EN ISO 5361:2016 | Anaesthetic and respiratory equipment. Tracheal tubes and connectors |
| 13/30272807 DC : 0 | BS ISO 18835 - INHALATIONAL ANAESTHESIA SYSTEMS - DRAW-OVER VAPORIZERS AND ASSOCIATED EQUIPMENT |
| BS ISO 6707-3:2017 | Buildings and civil engineering works. Vocabulary Sustainability terms |
| UNI EN ISO 8835-3 : 2010 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| 03/103293 DC : DRAFT JAN 2003 | BS EN ISO 10651-2 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| 16/30346835 DC : 0 | BS ISO 20789 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - PASSIVE HUMIDIFIERS |
| 01/561640 DC : DRAFT APR 2001 | BS EN ISO 8835-4 - INHALATIONAL ANAESTHESIA SYSTEMS - PART 4: ANAESTHETIC VAPOUR DELIVERY DEVICES |
| CSA Z18778 : 2008 : R2013 | RESPIRATORY EQUIPMENT - INFANT MONITORS - PARTICULAR REQUIREMENTS |
| CSA Z8185 : 2008(R2013) | RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS |
| NF EN ISO 80601-2-12 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| CSA Z8185 : 2008 | RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS |
| CAN/CSA-Z18777-08 (R2018) | Transportable Liquid Oxygen Systems for Medical Use - Particular Requirements (Adopted ISO 18777:2005, first edition, 2005-02-15, with Canadian deviations) |
| CSA Z15001 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN |
| CSA Z7376 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| BS EN ISO 5366:2016 | Anaesthetic and respiratory equipment. Tracheostomy tubes and connectors |
| BS ISO 16628:2008 | Tracheobronchial tubes. Sizing and marking |
| CSA Z10651.2: 2006 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| CSA Z18777 : 2008 | TRANSPORTABLE LIQUID OXYGEN SYSTEMS FOR MEDICAL USE - PARTICULAR REQUIREMENTS |
| CAN/CSA-Z15001:12 (R2017) | Anaesthetic and respiratory equipment - Compatibility with oxygen (Adopted ISO 15001:2010, second edition, 2010-06-01, with Canadian deviations) |
| I.S. EN ISO 7396-1:2016 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| CAN/CSA-Z10651-4-08 (R2018) | Lung Ventilators - Part 4: Particular Requirements for Operator-Powered Resuscitators (Adopted ISO 10651-4:2002, first edition, 2002-03-01, with Canadian deviations) |
| CSA Z8835.5 : 2006 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHETIC VENTILATORS |
| CSA ISO TS 18835 : 2014 | INHALATIONAL ANAESTHESIA SYSTEMS - DRAW-OVER VAPORIZERS AND ASSOCIATED EQUIPMENT |
| AAMI ISO 10651-4 : 1999 | LUNG VENTILATORS - PART 4: PARTICULAR REQUIREMENTS FOR OPERATOR-POWERED RESUSCITATORS |
| I.S. EN ISO 5356-2:2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 2: SCREW-THREADED WEIGHT-BEARING CONNECTORS (ISO 5356-2:2012) |
| I.S. EN ISO 15002:2008 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| I.S. EN ISO 80601-2-72:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015) |
| UNI EN ISO 17510-1 : 2009 | SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT |
| BS EN ISO 10524-3 : 2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| DIN EN ISO 5367:2015-02 | Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014) |
| DIN EN ISO 5359:2015-02 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
| DIN EN ISO 10524-3:2013-06 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005 + AMD 1:2013) |
| ASTM F 1690 : 1996 | Standard Specification for Humidifiers for Medical Use-Part 1 General Requirements for Active Humidification Systems |
| UNE-EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| ISO 10524-2:2018 | Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators |
| DIN EN ISO 9170-1:2016-09 (Draft) | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| ISO 80601-2-70:2015 | Medical electrical equipment Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
| I.S. EN ISO 80601-2-12:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011) |
| I.S. EN 60601-2-12:2006 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR THE SAFETY OF LUNG VENTILATORS - CRITICAL CARE VENTILATORS |
| ISO 10651-5:2006 | Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 5: Gas-powered emergency resuscitators |
| ISO 80601-2-12:2011 | Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
| DIN EN ISO 8835-5:2009-07 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHESIA VENTILATORS |
| BS EN ISO 8185:2007 | Respiratory tract humidifiers for medical use. Particular requirements for respiratory humidification systems |
| ISO 5366:2016 | Anaesthetic and respiratory equipment — Tracheostomy tubes and connectors |
| BS EN ISO 17510-1:2009 | Sleep apnoea breathing therapy Sleep apnoea breathing therapy equipment |
| ISO 9360-1:2000 | Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 1: HMEs for use with minimum tidal volumes of 250 ml |
| BS EN 12181:1998 | Oropharyngeal airways |
| ISO 18778:2005 | Respiratory equipment — Infant monitors — Particular requirements |
| BS EN ISO 9360-2:2009 | Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml |
| ISO 17510-2:2007 | Sleep apnoea breathing therapy Part 2: Masks and application accessories |
| BS EN 1820:2005 | Anaesthetic reservoir bags |
| ISO 7376:2009 | Anaesthetic and respiratory equipment Laryngoscopes for tracheal intubation |
| ISO 21969:2009 | High-pressure flexible connections for use with medical gas systems |
| BS EN ISO 10651-6:2009 | Lung ventilators for medical use. Particular requirements for basic safety and essential performance Home-care ventilatory support devices |
| ISO 9170-2:2008 | Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems |
| BS EN 13544-1 : 2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| BS EN ISO 19054 : 2006 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005) |
| ISO 80601-2-72:2015 | Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| BS EN ISO 18778:2009 | Respiratory equipment. Infant monitors. Particular requirements |
| ISO 18082:2014 | Anaesthetic and respiratory equipment — Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases |
| ISO 14408:2016 | Tracheal tubes designed for laser surgery — Requirements for marking and accompanying information |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| ISO 18777:2005 | Transportable liquid oxygen systems for medical use — Particular requirements |
| BS EN ISO 10651-2:2004 | Lung ventilators for medical use. Particular requirements for basic safety and essential performance Home care ventilators for ventilator-dependent patients |
| ISO 10651-6:2004 | Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 6: Home-care ventilatory support devices |
| BS EN ISO 14408:2016 | Tracheal tubes designed for laser surgery. Requirements for marking and accompanying information |
| ISO 5361:2016 | Anaesthetic and respiratory equipment — Tracheal tubes and connectors |
| BS EN ISO 15225:2016 | Medical devices. Quality management. Medical device nomenclature data structure |
| IEC 60601-2-13:2003+AMD1:2006 CSV | Medical electrical equipment - Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems |
| BS EN 794-3 : 1999 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| BS EN 740:1999 | Anaesthetic workstations and their modules. Particular requirements |
| ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
| ISO 80601-2-13:2011 | Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| UNE-EN 1820:2006 | Anaesthetic reservoir bags (ISO 5362:2000, modified) |
| ISO 8835-4:2004 | Inhalational anaesthesia systems Part 4: Anaesthetic vapour delivery devices |
| BS EN 1282-2 : 2005 | TRACHEOSTOMY TUBES - PART 2: PAEDIATRIC TUBES |
| BS EN ISO 5366-1:2004 | Anaesthetic and respiratory equipment. Tracheostomy tubes Tubes and connectors for use in adults |
| ISO 19054:2005 | Rail systems for supporting medical equipment |
| UNI EN ISO 80601-2-13 : 2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION |
| BS EN ISO 5356-1:2015 | Anaesthetic and respiratory equipment. Conical connectors Cones and sockets |
| ISO 5366-1:2000 | Anaesthetic and respiratory equipment Tracheostomy tubes Part 1: Tubes and connectors for use in adults |
| EN ISO 10651-4:2009 | Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002) |
| EN ISO 80601-2-72:2015 | Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015) |
| EN ISO 5361:2016 | Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016) |
| EN 1733 : 2002 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| EN ISO 10651-2:2009 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients (ISO 10651-2:2004) |
| EN 1820:2005+A1:2009 | Anaesthetic reservoir bags (ISO 5362:2000, modified) |
| EN 12342:1998+A1:2009 | Breathing tubes intended for use with anaesthetic apparatus and ventilators |
| EN ISO 8835-4:2009 | Inhalational anaesthesia systems - Part 4: Anaesthetic vapour delivery devices (ISO 8835-4:2004) |
| EN ISO 10651-6:2009 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices (ISO 10651-6:2004) |
| EN ISO 8835-5:2009 | Inhalational anaesthesia systems - Part 5: Anaesthetic ventilators (ISO 8835-5:2004) |
| EN ISO 18779:2005 | Medical devices for conserving oxygen and oxygen mixtures - Particular requirements (ISO 18779:2005) |
| EN ISO 17510-2:2009 | Sleep apnoea breathing therapy - Part 2: Masks and application accessories (ISO 17510-2:2007) |
| EN ISO 18777:2009 | Transportable liquid oxygen systems for medical use - Particular requirements (ISO 18777:2005) |
| EN ISO 14408:2016 | Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information (ISO 14408:2016) |
| EN ISO 9360-1:2009 | Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000) |
| EN ISO 10524-4:2008 | Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008) |
| EN ISO 15001:2011 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| EN ISO 18778:2009 | Respiratory equipment - Infant monitors - Particular requirements (ISO 18778:2005) |
| EN ISO 9170-2:2008 | Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008) |
| EN 794-3:1998+A2:2009 | Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators |
| EN ISO 7396-2:2007 | Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007) |
| EN ISO 5367:2014 | Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014) |
| EN ISO 8835-2:2009 | Inhalational anaesthesia systems - Part 2: Anaesthetic breathing systems (ISO 8835-2:2007) |
| I.S. EN ISO 10524-3:2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005) |
| ISO 80601-2-61:2017 | Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
| 16/30314880 DC : 0 | BS EN ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| ISO 5361-1:1988 | Tracheal tubes Part 1: General requirements |
| CSA Z10524-3 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| 06/30116855 DC : 0 | BS ISO 10524-4 - PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT |
| CSA Z10524-3 : 2012 : R2017 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| I.S. EN ISO 19054:2006 | RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005) |
| 13/30290370 DC : 0 | BS ISO 17510 - MEDICAL DEVICES - SLEEP APNOEA BREATHING THERAPY - MASKS AND APPLICATION ACCESSORIES |
| DIN ISO 10083:2008-12 | OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS |
| BS EN ISO 8835-3 : 2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| ASTM F 1054 : 2001 | Standard Specification for Conical Fittings (Withdrawn 2005) |
| I.S. EN ISO 8835-5:2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHESIA VENTILATORS |
| I.S. EN ISO 10651-2:2009 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| UNI EN ISO 10524-4 : 2008 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
| EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| BS EN ISO 10524-4:2008 | Pressure regulators for use with medical gases Low-pressure regulators |
| 15/30280234 DC : 0 | BS EN ISO 15225 - MEDICAL DEVICES - QUALITY MANAGEMENT - MEDICAL DEVICE NOMENCLATURE DATA STRUCTURE |
| 12/30210881 DC : DRAFT APR 2012 | BS EN ISO 5367 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS |
| CSA ISO 11196 : 0 | ANAESTHETIC GAS MONITORS |
| CSA Z10651.3 : 0 | LUNG VENTILATORS FOR MEDICAL USE - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| 14/30281856 DC : 0 | BS EN ISO 14408 - TRACHEAL TUBES DESIGNED FOR LASER SURGERY - REQUIREMENTS FOR MARKING AND ACCOMPANYING INFORMATION |
| 15/30300279 DC : 0 | BS ISO 80601-2-74 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-74: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY HUMIDIFYING EQUIPMENT |
| DIN EN ISO 9170-2:2009-09 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| BS EN ISO 9170-1:2008 | Terminal units for medical gas pipeline systems Terminal units for use with compressed medical gases and vacuum |
| ISO 16628:2008 | Tracheobronchial tubes Sizing and marking |
| 16/30316718 DC : 0 | BS EN ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
| 08/30159296 DC : DRAFT APR 2008 | BS EN ISO 15225 - NOMENCLATURE - SPECIFICATION FOR A NOMENCLATURE SYSTEM FOR MEDICAL DEVICES FOR THE PURPOSE OF REGULATORY DATA EXCHANGE |
| BS 7734:1994 | Specification for anaesthetic circle breathing systems |
| I.S. EN ISO 5367:2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS (ISO 5367:2014) |
| CSA Z10083 : 2008 : R2013 | OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS |
| BS EN ISO 5356-2:2012 | Anaesthetic and respiratory equipment. Conical connectors Screw-threaded weight-bearing connectors |
| CSA Z18779 : 2008 | MEDICAL DEVICES FOR CONSERVING OXYGEN AND OXYGEN MIXTURES - PARTICULAR REQUIREMENTS |
| CSA Z17510.1 : 2010 | SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT |
| ASTM F 2560 : 2006 | Standard Specification for Supralaryngeal Airways and Connectors |
| CSA ISO 5367 : 2014 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| CSA Z18777 : 2008 : R2013 | TRANSPORTABLE LIQUID OXYGEN SYSTEMS FOR MEDICAL USE - PARTICULAR REQUIREMENTS |
| CAN/CSA-Z10524-4:12 (R2017) | Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (Adopted ISO 10524-4:2008, first edition, 2008-06-01, with Canadian deviations) |
| 04/30084855 DC : 0 | PREN ISO 10083 - OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS |
| DIN EN ISO 80601-2-69:2014-12 | Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014) |
| CSA Z10651.2 : 2006 : R2015 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 2: HOME CARE VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| ISO 5358:1992 | Anaesthetic machines for use with humans |
| I.S. EN ISO 9170-1:2008 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| ISO 80601-2-67:2014 | Medical electrical equipment Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment |
| I.S. EN ISO 8835-3:2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS |
| ISO 5362:2006 | Anaesthetic reservoir bags |
| I.S. EN ISO 80601-2-69:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT (ISO 80601-2-69:2014) |
| ISO 18190:2016 | Anaesthetic and respiratory equipment — General requirements for airways and related equipment |
| CSA Z5361 : 2003 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| UNE-EN ISO 5366:2017 | Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors (ISO 5366:2016) |
| UNI EN ISO 5356-2 : 2013 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 2: SCREW-THREADED WEIGHT-BEARING CONNECTORS |
| PD 6630:1998 | Nomenclature system for medical devices for the purpose of regulatory data exchange. Rationale |
| ASTM F 2002 : 2001C | TERMINOLOGY RELATING TO ANESTHESIA AND RESPIRATORY EQUIPMENT |
| UNI EN ISO 15002 : 2008 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| CEI EN 60601-2-13 : 2007 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS |
| ISO 10524-1:2018 | Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| I.S. EN ISO 5359:2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
| ISO 18835:2015 | Inhalational anaesthesia systems Draw-over anaesthetic systems |
| I.S. EN ISO 10524-2:2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
| I.S. ISO 5361/1:1988 | TRACHEAL TUBES - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 7396-2:2007-07 | Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007) |
| DIN EN 794-3:2009-12 | Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators; German version EN 794-3:1998+A2:2009 |
| ISO 8185:2007 | Respiratory tract humidifiers for medical use Particular requirements for respiratory humidification systems |
| BS EN ISO 17510-2:2009 | Sleep apnoea breathing therapy Masks and application accessories |
| UNE-EN ISO 15001:2012 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| BS EN ISO 7396-2:2007 | Medical gas pipeline systems Anaesthetic gas scavenging disposal systems |
| UNE-EN ISO 5356-1:2015 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015) |
| ISO 17510-1:2007 | Sleep apnoea breathing therapy Part 1: Sleep apnoea breathing therapy equipment |
| BS EN ISO 18779:2005 | Medical devices for conserving oxygen and oxygen mixtures. Particular requirements |
| BS EN ISO 8835-5:2009 | Inhalational anaesthesia systems Anaesthesia ventilators |
| BS EN ISO 18777:2009 | Transportable liquid oxygen systems for medical use. Particular requirements |
| BS EN ISO 8835-4:2009 | Inhalational anaesthesia systems Anaesthetic vapour delivery devices |
| BS EN 1733:2002 | Suction catheters for use in the respiratory tract |
| ISO 7396-2:2007 | Medical gas pipeline systems Part 2: Anaesthetic gas scavenging disposal systems |
| DIN EN ISO 18779:2005-06 | Medical devices for conserving oxygen and oxygen mixtures - Particular requirements (ISO 18779:2005) |
| EN ISO 11196 : 1997 | ANAESTHETIC GAS MONITORS |
| DIN EN ISO 9360-1:2009-09 | Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000) |
| DIN EN ISO 8185:2009-07 | RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS |
| EN 60601-2-13 : 2006 AMD 1 2007 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS |
| DIN EN ISO 9360-2:2009-09 | Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml (ISO 9360-2:2001) |
| DIN EN 1282-2:2009-12 | TRACHEOSTOMY TUBES - PART 2: PAEDIATRIC TUBES |
| EN ISO 21969:2009 | High-pressure flexible connections for use with medical gas systems (ISO 21969:2009) |
| EN 60601-2-12:2006 | Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung ventilators - Critical care ventilators |
| ONORM EN 794-3 : 2010 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| CSA Z9170.1 : 2011 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
| CSA Z9360.1 : 2007 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART 1: HMES FOR USE WITH MINIMUM TIDAL VOLUMES OF 250 ML |
| CSA Z10651-5 : 2008 : R2018 | Lung Ventilators for Medical Use - Particular Requirements for Basic Safety and Essential Performance - Part 5: Gas-Powered Emergency Resuscitators |
| CSA Z9360.2:2007 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART 2: HMES FOR USE WITH TRACHEOSTOMIZED PATIENTS HAVING MINIMUM TIDAL VOLUMES OF 250 ML |
| CAN/CSA-ISO 5356-2:18 | CAN/CSA-ISO 5356-2:18 - Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors (Adopted ISO 5356-2:2012, third edition, 2012-11-15) |
| CSA Z10651-5 : 2008 : R2013 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| CSA Z10651-5 : 2008 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| CSA ISO 5361 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| CSA Z9360.1 : 2007 : R2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART 1: HMES FOR USE WITH MINIMUM TIDAL VOLUMES OF 250 ML |
| CSA Z9360.2 : 2007:R2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS - PART 2: HMES FOR USE WITH TRACHEOSTOMIZED PATIENTS HAVING MINIMUM TIDAL VOLUMES OF 250 ML |
| UNE-EN 794-3:1999 | LUNG VENTILATORS. PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS. |
| CSA Z9170.1 : 2011 : R2015 | TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
| CSA Z10651-5 : 2008 : INC : UPD 1 : 2011 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| UNE-EN 13544-1:2007 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.