ISO 4126-1:2013
Current
Current
The latest, up-to-date edition.
Safety devices for protection against excessive pressure — Part 1: Safety valves
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
12-07-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 4126-1:2013 specifies general requirements for safety valves irrespective of the fluid for which they are designed.
It is applicable to safety valves having a flow diameter of 4 mm and above which are for use at set pressures of 0,1 bar gauge and above. No limitation is placed on temperature.
ISO 4126-1:2013 is a product standard and is not applicable to applications of safety valves.
| Committee |
ISO/TC 185
|
| DevelopmentNote |
Supersedes ISO 4126 (04/2001) Supersedes ISO/DIS 4126-1. (07/2013)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IS/ISO 4126 : Part 1 : 2013 | Identical |
| NF EN ISO 4126-1/A1:2016 | Identical |
| UNI EN ISO 4126-1:2019 | Identical |
| UNI EN ISO 4126-1:2016 | Identical |
| NS-EN ISO 4126-1 : 2013 | Identical |
| NBN EN ISO 4126-1 : 2013 | Identical |
| I.S. EN ISO 4126-1:2013 | Identical |
| I.S. EN ISO 4126-1:2013/A2:2019 | Identical |
| SN EN ISO 4126-1:2013 | Identical |
| NEN-EN-ISO 4126-1:2013 | Identical |
| NS EN ISO 4126-1 : 2013 AMD 1 2016 | Identical |
| PN EN ISO 4126-1 : 2013/A2 : 2019-10 | Identical |
| DIN EN ISO 4126-1:2013-12 | Identical |
| UNI EN ISO 4126-1 : 2013 | Identical |
| SS-EN ISO 4126-1:2013 | Identical |
| UNE-EN ISO 4126-1:2014 | Identical |
| PN EN ISO 4126-1 : 2013 | Identical |
| BS EN ISO 4126-1 : 2013 | Identical |
| ONORM EN ISO 4126-1 : 2016 | Identical |
| NS-EN ISO 4126-1:2013/A2:2019 | Identical |
| NF EN ISO 4126-1:2013 | Identical |
| NEN EN ISO 4126-1 : 2013 AMD 1 2016 | Identical |
| DIN EN ISO 4126-1:2004-05 | Identical |
| EN ISO 4126-1:2013 | Identical |
| BS EN ISO 4126-1:2013+A1:2016 | Identical |
| 14/30259637 DC : 0 | BS EN ISO 21013-3 - CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 3: SIZING AND CAPACITY DETERMINATION |
| 99/707163 DC : DRAFT APR 99 | PREN 13480-6 - METALLIC INDUSTRIAL PIPING - PART 6: SAFETY SYSTEMS |
| ISO 4126-9:2008 | Safety devices for protection against excessive pressure Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices |
| 12/30261215 DC : 0 | BS EN 13060 - SMALL STEAM STERILIZERS |
| BS ISO 21013-1:2008 | Cryogenic vessels. Pressure-relief accessories for cryogenic service Reclosable pressure-relief valves |
| CSA B625 : 2013 | PORTABLE TANKS FOR THE TRANSPORT OF DANGEROUS GOODS |
| EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| 12/30262660 DC : DRAFT APR 2012 | BS EN 61010-2-040 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS |
| ISO 16923:2016 | Natural gas fuelling stations — CNG stations for fuelling vehicles |
| 10/30234327 DC : DRAFT DEC 2010 | BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS |
| 11/30212367 DC : 0 | BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT |
| 03/311404 DC : 0 | IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| CSA Z10083 : 2008 : R2013 | OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS |
| CSA Z10083 : 2008 | OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS |
| PREN 13060 : DRAFT 2012 | SMALL STEAM STERILIZERS |
| I.S. EN ISO 4126-3:2006 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 3: SAFETY VALVES AND BURSTING DISC SAFETY DEVICES IN COMBINATION |
| CSA C22.2 No. 61010.2.040 : 2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS |
| I.S. EN 1012-3:2013 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| I.S. EN 378-2:2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
| BS EN ISO 7396-1:2016 | Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum |
| ISO/TS 19883:2017 | Safety of pressure swing adsorption systems for hydrogen separation and purification |
| ISO 10083:2006 | Oxygen concentrator supply systems for use with medical gas pipeline systems |
| UNE-EN ISO 21013-3:2016 | Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016) |
| DIN EN ISO 4126-6:2014-10 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 6: APPLICATION, SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES (ISO 4126-6:2014) |
| DIN EN 13136:2013-12 | REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION |
| UNE-EN 378-2:2017 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| BS EN 12561-5:2011 | Railway applications. Tank wagons Devices for vapour return while filling or emptying of liquid products |
| BS EN 13731:2007 | Lifting bag systems for fire and rescue service use. Safety and peformance requirements |
| BS EN 13648-3:2002 | Cryogenic vessels. Safety devices for protection against excessive pressure Determination of required discharge. Capacity and sizing |
| BS EN 61010-2-011:2017 | Safety requirements for electrical equipment for measurement, control, and laboratory use Particular requirements for refrigerating equipment |
| BS EN 13136 : 2013 | REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION |
| BS EN 13648-1:2008 | Cryogenic vessels. Safety devices for protection against excessive pressure Safety valves for cryogenic service |
| BS EN 12416-1:2001 | Fixed firefighting systems. Powder systems Requirements and test methods for components |
| DIN EN 12828:2003-06 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| DIN EN 13731:2008-02 | Lifting bag systems for fire and rescue service use - Safety and performance requirements |
| EN 61010-2-012:2016 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
| EN 12416-1:2001+A2:2007 | Fixed firefighting systems - Powder systems - Part 1: Requirements and test methods for components |
| EN 12561-5:2011 | Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products |
| UNI EN 13136 : 2014 | REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION |
| 07/30158997 DC : 0 | BS EN 13731 - LIFTING BAG SYSTEMS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| BS ISO 4126-10:2010 | Safety devices for protection against excessive pressure Sizing of safety valves for gas/liquid two-phase flow |
| BS EN ISO 4126-3:2006 | Safety devices for protection against excessive pressure Safety valves and bursting disc safety devices in combination |
| 14/30230935 DC : 0 | BS EN ISO 4126-11 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 11: PERFORMANCE TESTING |
| 06/30154011 DC : DRAFT JULY 2006 | ISO 21013-1 - CRYOGENIC VESSELS - PRESSURE RELIEF ACCESSORIES FOR - CRYOGENIC SERVICE - PART 1: RECLOSABLE PRESSURE RELIEF VALVES |
| BS ISO 21013-3:2006 | Cryogenic vessels. Pressure-relief accessories for cryogenic service Sizing and capacity determination |
| 08/30184286 DC : DRAFT SEP 2008 | BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: TOP DEVICES FOR BOTTOM EMPTYING AND TOP FILLING OF LIQUID PRODUCTS |
| BS EN 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| PD ISO/TS 19883:2017 | Safety of pressure swing adsorption systems for hydrogen separation and purification |
| I.S. EN 13060:2014 | SMALL STEAM STERILIZERS |
| I.S. EN 13136:2013 | REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION |
| EN 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| ISO 4126-7:2013 | Safety devices for protection against excessive pressure — Part 7: Common data |
| DIN EN 1012-2:2011-12 | Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps |
| DIN EN 1012-1:2011-02 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
| ISO 4126-3:2006 | Safety devices for protection against excessive pressure Part 3: Safety valves and bursting disc safety devices in combination |
| BS EN ISO 4126-5 : 2013 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 5: CONTROLLED SAFETY PRESSURE RELIEF SYSTEMS (CSPRS) (ISO 4126-5:2013) |
| UNE-EN 12561-5:2012 | Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products |
| EN ISO 4126-3:2006 | Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) |
| I.S. EN 13648-1:2008 | CRYOGENIC VESSELS - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES FOR CRYOGENIC SERVICE |
| I.S. EN 1012-1:2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| I.S. EN 12416-1:2001 | FIXED FIREFIGHTING SYSTEMS - POWDER SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| DIN EN ISO 4126-6:2004-04 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 6: APPLICATION, SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES (ISO 4126-6:2014) |
| I.S. EN ISO 4126-5:2013 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 5: CONTROLLED SAFETY PRESSURE RELIEF SYSTEMS (CSPRS) (ISO 4126-5:2013) |
| I.S. EN 14129:2014 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS |
| I.S. EN ISO 4126-7:2013 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 7: COMMON DATA (ISO 4126-7:2013) |
| I.S. EN 12828:2012 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| ONORM EN ISO 4126-3 : 2006 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 3: SAFETY VALVES AND BURSTING DISC SAFETY DEVICES IN COMBINATION |
| I.S. EN 12561-5:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS |
| I.S. EN ISO 4126-6:2014 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 6: APPLICATION, SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES (ISO 4126-6:2014) |
| DIN EN ISO 4126-3:2006-06 | Safety devices for protection against exessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) |
| I.S. EN 1012-2:1996 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS |
| BS ISO 18154:2017 | Ships and marine technology. Safety valve for cargo tanks of LNG carriers. Design and testing requirements |
| I.S. EN ISO 21013-3:2016 | CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 3: SIZING AND CAPACITY DETERMINATION (ISO 21013-3:2016) |
| BS EN ISO 16923:2018 | Natural gas fuelling stations. CNG stations for fuelling vehicles |
| 13/30230940 DC : 0 | BS EN ISO 4126-6 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 6: APPLICATION, SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES |
| 13/30279156 DC : 0 | BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| 13/30255929 DC : 0 | BS EN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| PREN ISO 4126-6 : DRAFT 2013 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 6: APPLICATION, SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES (ISO/DIS 4126-6:2013) |
| 13/30291774 DC : 0 | BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
| CSA C22.2 No. 61010-2-012 : 2017 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| 08/30156074 DC : DRAFT APR 2008 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| BS ISO 4126-9:2008 | Safety devices for protection against excessive pressure Application and installation of safety devices excluding stand-alone bursting disc safety devices |
| BS EN 1012-3:2013 | Compressors and vacuum pumps. Safety requirements Process compressors |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| 09/30209618 DC : 0 | BS ISO 5149-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
| EN 13060:2014 | Small steam sterilizers |
| ISO/TS 20100:2008 | Gaseous hydrogen Fuelling stations |
| DIN EN ISO 7396-1:2016-09 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| ISO 21029-1:2018 | Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests |
| ISO 4126-10:2010 | Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves for gas/liquid two-phase flow |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| DIN EN 12828:2014-07 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| DIN EN 13648-1:2009-02 | CRYOGENIC VESSELS - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES FOR CRYOGENIC SERVICE |
| DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
| BS EN ISO 4126-7 : 2013 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 7: COMMON DATA (ISO 4126-7:2013) |
| UNE-EN 61010-2-011:2017 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| ISO 13631:2002 | Petroleum and natural gas industries Packaged reciprocating gas compressors |
| CSA C22.2 No. 60335-2-40 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
| UNI EN 1012-1 : 2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| UNI EN ISO 4126-6 : 2014 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 6: APPLICATION, SELECTION AND INSTALLATION OF BURSTING DISC SAFETY DEVICES |
| UNI EN 1012-3 : 2014 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| UNI EN 12561-5 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS |
| UNI EN 14129 : 2014 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS |
| UNI EN 12828 : 2014 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| UNI EN 1012-2 : 2009 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS |
| UNI EN 13648-1 : 2009 | CRYOGENIC VESSELS - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 1: SAFETY VALVES FOR CRYOGENIC SERVICE |
| 13/30271404 DC : DRAFT DEC 2013 | BS ISO 16923 - NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES |
| 11/30240282 DC : DRAFT MAR 2011 | BS EN 12828 - HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| I.S. EN 61010-2-040:2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS |
| 07/30168572 DC : 0 | BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| EEMUA 188 : 2009 | GUIDE FOR ESTABLISHING OPERATING PERIODS OF SAFETY VALVES |
| BS EN 61010-2-012:2016 | Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
| PREN 378-2 : DRAFT 2013 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
| I.S. EN 61010-2-012:2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
| EN 378-2:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| EN 13136:2013 | Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation |
| UNE-EN 13060:2015 | Small steam sterilizers |
| UNE-EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
| DIN EN 12416-1:2007-09 | FIXED FIREFIGHTING SYSTEMS - POWDER SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| DIN EN 14129:2014-05 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS |
| ISO 21013-3:2016 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination |
| BS EN 14129:2014 | LPG Equipment and accessories. Pressure relief valves for LPG pressure vessels |
| IEC 61010-2-011:2016 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment |
| ISO 4126-6:2014 | Safety devices for protection against excessive pressure — Part 6: Application, selection and installation of bursting disc safety devices |
| ISO 4126-5:2013 | Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) |
| IEC 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| UNE-EN ISO 4126-6:2015 | Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2014) |
| 11/30211394 DC : DRAFT MAR 2011 | BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS |
| BS EN 13060 : 2014 | SMALL STEAM STERILIZERS |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Part 2: Residential applications |
| BS EN 378-2:2016 | Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation |
| BS EN ISO 4126-6:2014 | Safety devices for protection against excessive pressure Application, selection and installation of bursting disc safety devices |
| UNE-EN ISO 4126-5:2014 | Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013) |
| 09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| BS EN 1012-2 : 1997 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS |
| EN 13648-1:2008 | Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service |
| EN ISO 4126-6:2014 | Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2014) |
| EN ISO 16923:2018 | Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016) |
| EN 13648-3:2002 | Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing |
| EN ISO 21013-3:2016 | Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016) |
| EN ISO 13631:2002 | Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002) |
| EN 14129:2014 | LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels |
| EN 12828:2012+A1:2014 | Heating systems in buildings - Design for water-based heating systems |
| EN 1012-2:1996+A1:2009 | Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps |
| EN 13731:2007 | Lifting bag systems for fire and rescue service use - Safety and performance requirements |
| DIN ISO 10083:2008-12 | OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS |
| 04/30112263 DC : 0 | PREN ISO 4126-3 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 3: SAFETY VALVES AND BURSTING DISC SAFETY DEVICES IN COMBINATION |
| ISO 21013-1:2008 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves |
| PREN 13480-6 : DRAFT 99 | METALLIC INDUSTRIAL PIPING - PART 6: SAFETY SYSTEM |
| 06/30155498 DC : DRAFT AUG 2006 | ISO 4126-10 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 10: SIZING OF SAFETY VALVES AND CONNECTED INLET AND OUTLET LINES FOR GAS/LIQUID TWO-PHASE FLOW |
| I.S. EN ISO 7396-1:2016 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
| BS ISO 14617-8:2002 | Graphical symbols for diagrams Valves and dampers |
| 13/30273033 DC : 0 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| 17/30358655 DC : 0 | BS EN 13136 - REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION |
| ISO 18154:2017 | Ships and marine technology — Safety valve for cargo tanks of LNG carriers — Design and testing requirements |
| BS ISO 16923 : 2016 | NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES |
| BS EN ISO 21013-3:2016 | Cryogenic vessels. Pressure-relief accessories for cryogenic service Sizing and capacity determination |
| 04/30084855 DC : 0 | PREN ISO 10083 - OXYGEN CONCENTRATOR SUPPLY SYSTEMS FOR USE WITH MEDICAL GAS PIPELINE SYSTEMS |
| UNE-EN 13136:2014 | Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation |
| ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
| CSA C22.2 No. 61010-2-011 : 2017 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-011: PARTICULAR REQUIREMENTS FOR REFRIGERATING EQUIPMENT |
| I.S. EN ISO 16923:2018 | NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016) |
| ISO 5149-2:2014 | Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation |
| UNE-EN ISO 4126-7:2014 | Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2013) |
| DIN EN 12561-5:2011-10 | Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products |
| BS ISO 5149-2:2014 | Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation |
| BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
| BS EN ISO 13631:2002 | Petroleum and natural gas industries. Packaged reciprocating gas compressors |
| BS EN 12828 : 2012 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| DD ISO/TS 20100:2008 | Gaseous hydrogen. Fuelling stations |
| BS EN 1012-1:2010 | Compressors and vacuum pumps. Safety requirements Air compressors |
| EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
| I.S. EN 61010-2-011:2017 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-011: PARTICULAR REQUIREMENTS FOR REFRIGERATING EQUIPMENT |
| UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
| EN 1012-1:2010 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
| EN 61010-2-011:2017 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment |
| UNE-EN 1012-2:1996 | COMPRESSORS AND VACUUM PUMPS. SAFETY REQUIREMENTS. PART 2: VACUUM PUMPS. |
| SA TS 19883:2020 | Safety of pressure swing adsorption systems for hydrogen separation and purification (ISO/TS 19883:2017, MOD) |
| ISO 4126-7:2013 | Safety devices for protection against excessive pressure — Part 7: Common data |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| AS 19880.3:2020 | Gaseous hydrogen - Fuelling stations Valves (ISO 19880-3:2018, MOD) |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| API 527 : 2014 | SEAT TIGHTNESS OF PRESSURE RELIEF VALVES |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.