ISO 4080:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Rubber and plastics hoses and hose assemblies — Determination of permeability to gas
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
13-06-2024
Superseded by
Language(s)
English, French, Russian
Published date
07-12-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 4080:2009 specifies three methods for the determination of the volume of gas diffusing through a rubber or plastics hose or length of tubing in a specified time.
- Method 1: For determining the permeability of the complete hose or length of tubing, excluding end-fittings, to the test gas. The permeability is calculated with respect to the length of the hose or tubing.
- Method 2: For determining the permeability at the hose/fitting interface. This method is used when determining the permeability characteristics of hoses with an unpricked cover, when the gas usually issues from the textile reinforcement at the cut ends. The permeability is calculated with respect to the length of the hose.
- Method 3: For determining precisely the permeability of a hose or hose assembly to the test gas. The permeability is calculated with respect to the surface area of the hose lining.
The methods are applicable only to gases which are insoluble in water.
| Committee |
ISO/TC 45/SC 1
|
| DevelopmentNote |
Supersedes ISO/DIS 4080. (12/2009)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| DIN EN ISO 4080:2010-05 | Identical |
| NF EN ISO 4080 : 2010 | Identical |
| NBN EN ISO 4080 : 2010 | Identical |
| NEN EN ISO 4080 : 2010 | Identical |
| NS EN ISO 4080 : 2009 | Identical |
| I.S. EN ISO 4080:2009 | Identical |
| PN EN ISO 4080 : 2010 | Identical |
| SAC GB/T 18422 : 2001 | Identical |
| SN EN ISO 4080:2010 | Identical |
| UNI EN ISO 4080 : 2010 | Identical |
| UNE-EN ISO 4080:2010 | Identical |
| BS EN ISO 4080:2009 | Identical |
| EN ISO 4080:2009 | Identical |
| ONORM EN ISO 4080 : 2010 | Identical |
| DS EN ISO 4080 : 2010 | Identical |
| BS 5173-103.11(1988) : 1988 | Identical |
| BS ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Safety |
| BS ISO 7628:2010 | Road vehicles. Thermoplastics tubing for air braking systems |
| ISO 11759:1999 | Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification |
| DIN EN ISO 3821:2016-10 (Draft) | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| ISO 17165-1:2007 | Hydraulic fluid power — Hose assemblies — Part 1: Dimensions and requirements |
| NF ISO 16110-1 : 2009 | HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY |
| I.S. EN ISO 3821:2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| UNE-EN 16436-1:2014 | Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
| BS EN 12806:2003 | Automotive liquefied petroleum gas components. Other than containers |
| BS EN 559:2003 | Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
| EN 12806:2003 | Automotive liquefied petroleum gas components - Other than containers |
| OVE/ONORM EN 62282-4-101 : 2015 | FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS (APU) - SAFETY OF ELECTRICALLY POWERED INDUSTRIAL TRUCKS (IEC 62282-4-101:2014) |
| BS EN 62282-5-1:2012 | Fuel cell technologies Portable fuel cell power systems. Safety |
| 99/716445 DC : DRAFT NOV 99 | AUTOMOTIVE LPG FILLING SYSTEM - PART 1: DIMENSIONS AND TEST REQUIREMENTS FOR THE CONNECTOR |
| PD ISO/TR 17784:2003 | Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel |
| NF EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| 07/30127452 DC : DRAFT AUG 2007 | BS ISO 13628-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification |
| I.S. EN 16436-1:2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| EN 16436-1:2014+A1:2015 | Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
| DIN EN ISO 3821:2010-07 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| I.S. EN ISO 14113:2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| I.S. EN 12806:2003 | AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS |
| 17/30362339 DC : 0 | BS ISO 16964 - GAS CYLINDERS - FLEXIBLE HOSES ASSEMBLIES - SPECIFICATION AND TESTING |
| UNI ISO 17165-1 : 2012 | HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS |
| BS ISO 17165-1:2007 | Hydraulic fluid power. Hose assemblies Dimensions and requirements |
| UNI EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| API 17E REDLINE : 2010 | SPECIFICATION FOR SUBSEA UMBILICALS |
| ISO/TR 17784:2003 | Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel |
| ISO/TR 7628-2:1986 | Road vehicles Thermoplastics tubing for use in air braking systems Part 2: Installation on the vehicle and test methods |
| ONORM EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Part 1: Safety |
| DIN EN ISO 14113:2014-02 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| BS EN 1763-1:2001 | Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase Requirements for rubber and plastics tubing and hoses |
| IEC 62282-5-1:2012 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| UNI EN ISO 14113 : 2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) |
| UNI EN ISO 13628-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| ISO 3821:2008 | Gas welding equipment Rubber hoses for welding, cutting and allied processes |
| 08/30190043 DC : DRAFT SEP 2008 | BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
| BS ISO 13628-5:2002 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals |
| CSA 12.3 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| BS ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification |
| ISO 7628:2010 | Road vehicles Thermoplastics tubing for air braking systems |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| UNE-EN ISO 3821:2011 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| UNE-EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| UNE-EN 62282-5-1:2013 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| UNE-ISO 16110-1:2015 | Hydrogen generators using fuel processing technologies -- Part 1: Safety |
| ISO 13628-5:2009 | Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals |
| 10/30173705 DC : DRAFT SEP 2010 | BS EN 62282-5-1 - FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY |
| EN ISO 3821:2010 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
| EN 1327:1996 | Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| EN 559 : 2003 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| EN ISO 13628-5:2009 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009) |
| EN 1763-1 : 2000 | RUBBER AND PLASTICS TUBING, HOSES AND ASSEMBLIES FOR USE WITH COMMERCIAL PROPANE, COMMERCIAL BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE - PART 1: REQUIREMENTS FOR RUBBER AND PLASTICS TUBING AND HOSES |
| EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| DIN EN 16436-1:2016-04 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| 15/30317648 DC : 0 | BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
| API SPEC 17E : 2017 | SPECIFICATION FOR SUBSEA UMBILICALS |
| 15/30317663 DC : 0 | BS ISO 11759 - RUBBER HOSES AND HOSE ASSEMBLIES FOR DISPENSING LIQUEFIED PETROLEUM GASES (LPGS) - SPECIFICATION |
| 08/30171587 DC : DRAFT MAY 2008 | BS ISO 7628 - ROAD VEHICLES - THERMOPLASTICS TUBING FOR AIR BRAKING SYSTEMS |
| BS EN ISO 13628-5:2009 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals |
| I.S. EN ISO 13628-5:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| BS EN ISO 3821:2010 | Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
| BS EN 16436-1 : 2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| 16/30354067 DC : 0 | BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY |
| BS EN ISO 14113:2013 | Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012) |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| CSA/ANSI NGV3.1 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| AS/NZS 1335:2020 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.