ISO 4065:1996
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Thermoplastics pipes Universal wall thickness table
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
02-10-2018
Superseded by
Language(s)
English, French
Published date
26-12-1996
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Describes the relationship between the nominal wall thickness and the nominal outside diameter of thermoplastics pipes. Applicable to smooth thermoplastics pipes of constant circular cross-section along the whole length of the pipe.
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| PN ISO 4065 : 2008 | Identical |
| NEN ISO 4065 : 2018 | Identical |
| SAC GB/T 10798 : 2001 | Identical |
| DIN 8062:2009-10 | Identical |
| SN ISO 4065 : 1996 | Identical |
| GOST ISO 4065 : 2005 ERRATA 2008 | Identical |
| UNI EN ISO 15877-2 : 2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: PIPES |
| DIN EN ISO 22391-2:2010-04 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009) |
| BS EN ISO 1452-2:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) Pipes |
| BS EN 1519-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE) Specifications for pipes, fittings and the system |
| PREN 1451-1 : DRAFT 2016 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS ISO 4427-2 : 2007 | PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY - PART 2: PIPES |
| 10/30228352 DC : 0 | BS EN ISO 15874-2 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 2: PIPES |
| 16/30336859 DC : 0 | BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| PREN 1519-1 : DRAFT 2017 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM |
| EN ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017) |
| BS EN ISO 22391-1:2009 | Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) General |
| 13/30280432 DC : 0 | BS ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER UNDER PRESSURE - SPECIFICATIONS |
| BS ISO 10838-3:2001 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm |
| PREN ISO 15874-1 : DRAFT 2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL |
| BS ISO 10931-1:1997 | Plastics piping systems for industrial applications. Poly (vinylidene fluoride) General |
| DIN 16962-12:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYPROPYLENE (PP) FOR PIPES UNDER PRESSURE, PP-H 100, PP-B 80 AND PP-R 80 - PART 12: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING; DIMENSIONS |
| 12/30256669 DC : 0 | BS ISO 4437-2 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 2: PIPES |
| 08/30172449 DC : DRAFT APR 2008 | BS ISO 8779 - PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES FOR IRRIGATION - SPECIFICATIONS |
| ONORM EN ISO 22391-1 : 2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL |
| DIN 16963-11:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYETHYLENE (PE) FOR PIPES UNDER PRESSURE, PE 80 AND PE 100 - PART 11: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING - DIMENSIONS |
| ISO 15439-2:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 2: Pipes |
| EN 1555-2:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
| EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| ISO 7671:2003 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polypropylene (PP) |
| ISO/TR 4191:2014 | Plastics piping systems for water supply Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) Guidance for installation |
| ISO 4437:2007 | Buried polyethylene (PE) pipes for the supply of gaseous fuels Metric series Specifications |
| ISO 4437-2:2014 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes |
| ISO 21307:2017 | Plastics pipes and fittings — Butt fusion jointing procedures for polyethylene (PE) piping systems |
| 17/30363921 DC : 0 | BS EN 17176-2 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 2: PIPES |
| EN 1519-1:1999 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
| I.S. EN ISO 15876-1:2017 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 1: GENERAL (ISO 15876-1:2017) |
| UNI EN 1555-1 : 2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| DIN EN 12201-1:2011-11 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| BS EN 1566-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Specification for pipes, fittings and the system |
| BS EN 1452-2 : 2000 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES |
| BS EN 13244-1:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) General |
| BS EN ISO 15875-2:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Pipes |
| UNE-EN 1555-2:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
| BS EN 1555-2:2010 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes |
| BS EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
| UNE-EN ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017) |
| I.S. EN ISO 15877-2:2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: PIPES |
| DIN 16831-2:2003-05 | PIPE FITTINGS AND JOINT ASSEMBLIES FOR POLYBUTENE PRESSURE PIPES - TYPE PB 125 - PART 2: DIMENSIONS OF INJECTION-MOULDED TEES FOR SOCKET WELDING |
| EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| DIN EN 1456-1:2001-12 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPING COMPONENTS AND THE SYSTEM |
| EN 12201-2:2011+A1:2013 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes |
| DIN EN 1452-1:1999-09 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| DIN EN 13244-1:2003-04 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: GENERAL |
| EN 13244-1:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General |
| DIN EN 1452-2:1999-09 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES |
| EN 12666-1:2005+A1:2011 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
| NBR 15939-1 : 2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 1: REQUIREMENTS AND TEST METHODS |
| DIN 8063-10:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 10: WALL BRACKET ELBOWS - DIMENSIONS |
| 10/30212144 DC : 0 | BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| I.S. EN 1519-1:1999 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS ISO 17467-2:2012 | Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Pipes |
| BS 2782-11.1123C(1998) : 1998 | METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - PLASTICS PIPING SYSTEMS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) END-LOAD-BEARING DOUBLE-SOCKET JOINTS - TEST METHOD FOR LEAKTIGHTNESS AND STRENGTH WHILE SUBJECTED TO BENDING AND INTERNAL PRESSURE |
| ISO 10838-2:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm |
| 11/30246452 DC : 0 | BS EN 14758-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS EN ISO 22391-2:2009 | Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Pipes |
| I.S. EN 1452-1:1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| BS EN ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) General |
| ISO 10838-1:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm |
| I.S. EN 13244-1:2002 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - GENERAL |
| 17/30364341 DC : 0 | BS EN 1519-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS ISO 4437-2:2014 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes |
| BS 2782-11.S 1160A&B(1998) : 1998 | THERMOPLASTICS PIPES FOR INDUSTRIAL APPLICATIONS UNDER PRESSURE - DETERMINATION OF THE CHEMICAL RESISTANCE FACTOR AND OF THE BASIC STRESS - POLYOLEFIN PIPES |
| 16/30332879 DC : 0 | BS EN 1451-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| 03/115115 DC : DRAFT OCT 2003 | ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER - SPECIFICATIONS |
| DIN 8077:2008-09 | POLYPROPYLENE (PP) PIPES - PP-H, PP-B, PP-R, PP-RCT - DIMENSIONS |
| 08/30168675 DC : DRAFT JULY 2008 | BS EN ISO 1452-2 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) - PART 2: PIPES |
| 05/30131849 DC : DRAFT APR 2005 | ISO 8772 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) |
| DIN 16834:2009-10 | Pipes of raised-temperature-resistance polyethylene (PE-RT) - PE-RT Type I and PE-RT Type II - Dimensions |
| BS EN ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations. Polybutene (PB) Pipes |
| ISO 6993-1:2006 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) |
| DIN 8074:2011-12 | Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English |
| 08/30170172 DC : DRAFT JULY 2008 | BS ISO 22391-2 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 2: PIPES |
| BS 2782-11:Method 1121C:1997 | Methods of testing plastics. Thermoplastics pipes, fittings and valves Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series |
| 07/30165577 DC : 0 | BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| 04/30081969 DC : DRAFT AUG 2004 | ISO 6993-1 - BURIED, HIGH-IMPACT POLY (VINYL CHLORIDE) (PVC-HI) PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - PART 1: PIPES OPERATING PRESSURE OF 1 BAR (100 KPA) |
| ISO 6993-4:2006 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 4: Code of practice for design, handling and installation |
| BS ISO 10931-2:1997 | Plastics piping systems for industrial applications. Poly (vinylidene fluoride) Pipes |
| ISO 4427:1996 | Polyethylene (PE) pipes for water supply Specifications |
| ISO 8773:2006 | Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene (PP) |
| ISO 19220:2004 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Styrene copolymer blends (SAN + PVC) |
| PREN 1852-1 : DRAFT 2016 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| ONORM EN ISO 15874-1 : 2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL (ISO 15874-1:2013) |
| EN 1566-1:1998 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system |
| EN 1565-1:1998 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system |
| EN 1852-1:2018 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system |
| EN ISO 15874-1:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013) |
| I.S. EN ISO 15874-2:2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 2: PIPES (ISO 15874-2:2013) |
| DIN EN 1555-2:2010-12 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
| DIN EN 14758-1:2012-05 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system |
| DIN EN ISO 15876-2:2004-03 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 2: PIPES |
| BS EN 12734:2000 | Irrigation techniques. Quick coupling pipes for movable irrigation supply. Technical characteristics and testing |
| DIN 8063-6:1980-07 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 6: INJECTION-MOULDED ELBOWS FOR SOLVENT CEMENTING - DIMENSIONS |
| I.S. EN 12201-2:2011 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 2: PIPES |
| EN ISO 22391-2:2009 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009) |
| DIN EN ISO 15874-1:2004-03 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) |
| DIN 16874:2000-06 | PIPES AND FITTINGS OF HIGH-DENSITY POLYETHYLENE (PE-HD) FOR CABLE DUCTING - DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS |
| I.S. EN ISO 15875-2:2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 2: PIPES |
| DIN 8063-3:1980-07 | PIPE JOINT ASSEMBLIES AND FITTINGS FOR UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PRESSURE PIPES - PART 3: DIMENSIONS OF SCREWED PIPE JOINT ASSEMBLIES |
| I.S. EN 12201-1:2011 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| I.S. EN 1555-1:2010-2015 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| DIN 16876:2000-11 | PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR DUCTING - DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS |
| DIN EN ISO 15874-2:2004-03 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) |
| I.S. EN 14758-1:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN 1555-2:2010 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 2: PIPES |
| I.S. EN 12666-1:2006 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN 8063-8:1980-07 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) FOR PIPES UNDER PRESSURE - PART 8: INJECTION-MOULDED SOCKETS, CAPS AND NIPPLES FOR SOLVENT CEMENTING - DIMENSIONS |
| UNI EN ISO 15874-1 : 2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL |
| BS 7291-3:2001 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Specification for cross-linked polyethylene (PE-X) pipes and associated fittings |
| BS 7291-1:2001 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings General requirements |
| BS 7291-2:2001 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings Specification for polybutylene (PB) pipes and associated fittings |
| BS EN 1451-1:2017 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Specifications for pipes, fittings and the system |
| 15/30324134 DC : 0 | BS EN ISO 15876-2 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 2: PIPES |
| DIN SPEC 19674-1:2011-02 | Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 1: General |
| DIN 16969:2012-11 | PIPES MADE OF POLYBUTENE-1 (PB-1) - PB 125 - DIMENSIONS |
| ISO 8772:2006 | Plastics piping systems for non-pressure underground drainage and sewerage Polyethylene (PE) |
| 05/30131855 DC : DRAFT APR 2005 | ISO 8773 - PLASTICS PIPING SYSTEMS FOR UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) |
| 02/121757 DC : DRAFT APR 2002 | BS ISO 19220 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - STYRENE COPOLYMER BLENDS (SAN + PVC) |
| DIN ISO 16486-2:2015-07 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes (ISO 16486-2:2012 + AMD 1:2014) |
| 17/30351673 DC : 0 | BS ISO 11922-1 - THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - DIMENSIONS AND TOLERANCES - PART 1: METRIC SERIES |
| 08/30185535 DC : DRAFT JULY 2008 | BS EN ISO 1452-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) - PART 1: GENERAL |
| ISO 7682:2003 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene (ABS) |
| DIN 16842:2013-05 | Polyethylene (PE) pipes - PE-HD for pressureless applications - General quality requirements, dimensions and testing; Text in German and English |
| 12/30256736 DC : 0 | BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| DIN EN ISO 1452-2:2010-04 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009) |
| 03/102186 DC : DRAFT AUG 2003 | EN 14758-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-M) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS ISO 4437:2007 | Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications |
| BS EN ISO 15494:2015 | Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system |
| BS ISO 14531-1:2002 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications Pipes |
| BS ISO 4437-1:2014 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
| PREN 17176-2 : DRAFT 2017 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 2: PIPES |
| DIN EN ISO 1452-1:2010-04 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009) |
| ISO 8584-1:1990 | Thermoplastics pipes for industrial applications under pressure Determination of the chemical resistance factor and of the basic stress Part 1: Polyolefin pipes |
| ISO 15494:2015 | Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system |
| EN 1451-1:2017 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system |
| EN 1455-1:1999 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system |
| I.S. EN 1451-1:2017 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS EN 1852-1:2018 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Specifications for pipes, fittings and the system |
| ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General |
| ISO 4427-2:2007 | Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 2: Pipes |
| ISO 14531-4:2006 | Plastics pipes and fittings Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels Metric series Specifications Part 4: System design and installation guidelines |
| DIN EN ISO 15877-1:2011-03 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009 + AMD 1:2010) |
| ISO 10931-2:1997 | Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Part 2: Pipes |
| ISO 15877-1:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General |
| EN ISO 15874-2:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013) |
| UNE-EN ISO 15874-2:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013) |
| UNI EN 1555-2 : 2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 2: PIPES |
| DIN EN 1555-1:2010-12 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| DIN EN 12666-1:2011-11 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system (includes Amendment A1:2011) |
| UNE-EN 14758-1:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system |
| BS EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General |
| ISO 10931:2005 | Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system |
| UNI EN ISO 15874-2 : 2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 2: PIPES |
| UNI EN 12201-1 : 2012 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| UNI EN 12201-2 : 2013 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes |
| UNI EN 12666-1 : 2011 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| UNI EN 14758-1 : 2012 | PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| ISO 8085-2:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings |
| ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes |
| 13/30212494 DC : 0 | BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES |
| 04/30082014 DC : DRAFT AUG 2004 | ISO 6993-4 - BURIED, HIGH-IMPACT POLY(VINYL CHLORIDE) (PVC-HI) PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - NORMAL - PART 4: CODE OF PRACTICE FOR DESIGN, HANDLING AND INSTALLATION |
| BS EN ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations. Polybutene (PB) General |
| 05/30130526 DC : DRAFT MAR 2005 | ISO 22621-2 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 2: PIPES |
| 11/30211183 DC : 0 | BS ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER UNDER PRESSURE - SPECIFICATIONS |
| PREN ISO 15494 : DRAFT 2013 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013) |
| PD ISO/TR 4191:2014 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O). Guidance for installation |
| SS UNI E13.08.497.0 : 1990 | UNPLASTICIZED PVC PIPES UNDER PRESSURE - TYPES, DIMENSIONS AND REQUIREMENTS |
| DIN 8075:2011-12 | POLYETHYLENE (PE) PIPES - PE 80, PE 100 - GENERAL QUALITY REQUIREMENTS, TESTING |
| ISO 17467-2:2012 | Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 2: Pipes |
| 10/30212147 DC : 0 | BS EN 12201-2 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 2: PIPES |
| DIN 8063-8:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) FOR PIPES UNDER PRESSURE - PART 8: INJECTION-MOULDED SOCKETS, CAPS AND NIPPLES FOR SOLVENT CEMENTING - DIMENSIONS |
| DIN 8079:2009-10 | Chlorinated polyvinyl chloride (PVC-C) pipes - Dimensions |
| DIN 8062:2009-10 | Unplasticized polyvinyl chloride (PVC-U) pipes - Dimensions |
| UNI EN ISO 1452-1 : 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| I.S. EN ISO 15876-2:2017 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 2: PIPES (ISO 15876-2:2017) |
| 11/30248333 DC : 0 | BS ISO 17467-2 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 2: PIPES |
| BS ISO 10838-2:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Metal fittings for pipes of nominal outside diameter greater than 63mm |
| 08/30170168 DC : DRAFT JULY 2008 | BS ISO 22391-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL |
| UNI EN ISO 22391-2 : 2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 2: PIPES |
| ISO 11922-1:2018 | Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
| ISO 1452-2:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes |
| I.S. EN ISO 15494:2015 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| BS ISO 8085-2:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings |
| EN ISO 15494:2015 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
| PREN ISO 15874-2 : DRAFT 2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 2: PIPES |
| ISO 8770:2003 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polyethylene (PE) |
| UNI EN ISO 15877-1 : 2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL |
| ISO 14531-1:2002 | Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes |
| BS EN ISO 15877-1 : 2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL |
| EN ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017) |
| DIN EN ISO 15494:2016-03 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| PREN 14758-1 : DRAFT 2011 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| ISO 4427-1:2007 | Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General |
| ISO 8779:2010 | Plastics piping systems Polyethylene (PE) pipes for irrigation Specifications |
| I.S. EN ISO 1452-1:2009 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| ISO 16486-2:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 2: Pipes |
| I.S. EN 1455-1:1999 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN ISO 1452-2:2009 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES |
| ISO 6993:2001 | Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels Specifications |
| ISO 10838-3:2001 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm |
| ISO 22621-2:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 2: Pipes |
| UNE-EN 12201-2:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes |
| BS EN ISO 15874-1:2013 | Plastics piping systems for hot and cold water installations. Polypropylene (PP) General |
| BS EN 12201-2 : 2011 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 2: PIPES |
| UNE-EN ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017) |
| ISO 15875-1:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General |
| ISO 15875-2:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes |
| BS EN 1455-1:2000 | Plastics piping systems for soil and waste (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Specifications for pipes, fittings and the system |
| UNE-EN 1555-1:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| BS EN ISO 15874-2 : 2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 2: PIPES |
| ISO 15493:2003 | Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series |
| ISO 15874-2:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes |
| ISO 22391-1:2009 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General |
| BS EN 12666-1 : 2005 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| ISO 13783:1997 | Plastics piping systems — Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints — Test method for leaktightness and strength while subjected to bending and internal pressure |
| BS EN ISO 15875-1:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) General |
| BS EN ISO 15877-2 : 2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: PIPES |
| BS EN 14758-1:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifiers (PP-MD) Specifications for pipes, fittings and the system |
| ISO 15877-2:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes |
| BS EN ISO 13783:1998 | Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure |
| EN 1456-1 : 2001 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPING COMPONENTS AND THE SYSTEM |
| EN 1452-1 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| EN ISO 13783:1997 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997) |
| EN ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009) |
| EN 1452-2 : 1999 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES |
| EN ISO 22391-1:2009 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009) |
| EN 14758-1:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system |
| EN ISO 1452-2:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes (ISO 1452-2:2009) |
| EN 1680:1997 | Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms |
| I.S. EN 1852-1:2018 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN 8063-6:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 6: INJECTION-MOULDED ELBOWS FOR SOLVENT CEMENTING - DIMENSIONS |
| UNE-EN ISO 15494:2016 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
| 17/30363924 DC : 0 | BS EN 17176-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL |
| BS ISO 14531-4:2006 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications System design and installation guidelines |
| DIN 8063-5:1999-10 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 5: GENERAL QUALITY REQUIREMENTS, TESTING |
| BS ISO 10838-1:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Metal fittings for pipes of nominal outside diameter less than or equal to 63mm |
| BS ISO 21307:2011 | Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems |
| PREN 17176-1 : DRAFT 2017 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL |
| BS ISO 4427-1 : 2007 | PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY - PART 1: GENERAL |
| I.S. EN 13244-2:2002 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PIPES |
| 08/30191147 DC : 0 | BS EN 1555-2 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 2: PIPES |
| NF EN ISO 22391-1 : 2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL |
| BS ISO 8584-1:1990 | Thermoplastics pipes for industrial applications under pressure. Determination of the chemical resistance factor and of the basic stress Polyolefin pipes |
| BS ISO 16422:2014 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications |
| 04/30126883 DC : DRAFT DEC 2004 | ISO 4437 - BURIED POLYETHYLENE (PE) PIPES FOR THE SUPPLY OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS |
| DIN 8063-3:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC U) FOR PIPES UNDER PRESSURE - PART 3: UNIONS - DIMENSIONS |
| 15/30324130 DC : 0 | BS EN ISO 15876-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 1: GENERAL |
| 10/30228348 DC : 0 | BS EN ISO 15874-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL |
| DIN SPEC 19674-2:2011-02 | Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 2: Pipes |
| UNI EN ISO 1452-2 : 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: PIPES |
| UNI EN ISO 22391-1 : 2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL |
| DIN EN ISO 22391-1:2010-04 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009) |
| I.S. 424:1990 | UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PIPES AND FITTINGS FOR BURIED DRAINAGE AND SEWAGE SYSTEMS - SPECIFICATIONS |
| I.S. EN ISO 22391-2:2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 2: PIPES |
| BS ISO 8779 : 2010 | PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES FOR IRRIGATION - SPECIFICATIONS |
| I.S. EN ISO 22391-1:2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL |
| ISO 16422:2014 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications |
| ISO 4437-1:2014 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General |
| ISO 15874-1:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General |
| UNE-ISO 16422:2015 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications |
| ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General |
| I.S. EN ISO 15877-1:2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL |
| I.S. EN ISO 15874-1:2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL (ISO 15874-1:2013) |
| NF EN 1555-2 : 2010 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 2: PIPES |
| DIN EN ISO 15877-2:2011-03 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2009 + AMD 1:2010) |
| DIN EN ISO 10931:2015-11 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 10931:2005 + AMD 1:2015) |
| DIN EN 12201-2:2013-12 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes (includes Amendment A1:2013) |
| BS EN 1452-1 : 2000 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| BS EN ISO 10931 : 2005 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLY(VINYLIDENE FLUORIDE) (PVDF) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM |
| ISO 22391-2:2009 | Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes |
| UNE-EN 12201-1:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| BS EN ISO 15493 : 2003 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS), UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) AND CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO 15493:2003) |
| UNE-EN ISO 15874-1:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013) |
| BS EN 1565-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC) Specifications for pipes, fittings and the system |
| BS EN 13244-2:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) Pipes |
| EN 12734:2000 | Irrigation techniques - Quick coupling pipes for movable irrigation supply - Technical characteristics and testing |
| DIN 16831-1:2003-05 | PIPE FITTINGS AND JOINT ASSEMBLIES FOR POLYBUTENE PRESSURE PIPES - TYPE PB 125 - PART 1: DIMENSIONS OF INJECTION-MOULDED ELBOWS FOR SOCKET WELDING |
| DIN 16831-4:2003-05 | PIPE FITTINGS AND JOINT ASSEMBLIES FOR POLYBUTENE PRESSURE PIPES - TYPE PB 125 - PART 4: DIMENSIONS OF INJECTION-MOULDED REDUCERS FOR SOCKET WELDING |
| DIN 16831-3:2003-05 | PIPE FITTINGS AND JOINT ASSEMBLIES FOR POLYBUTENE PRESSURE PIPES - TYPE PB 125 - PART 3: DIMENSIONS OF INJECTION-MOULDED SOCKETS AND CAPS FOR SOCKET WELDING |
| DIN EN 13244-2:2003-04 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: PIPES |
| DIN 16963-5:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYETHYLENE (PE) FOR PIPES UNDER PRESSURE, PE 80 AND PE 100 - PART 5: GENERAL QUALITY REQUIREMENTS, TESTING |
| DIN 16831-6:2003-06 | PIPE FITTINGS AND JOINT ASSEMBLIES FOR POLYBUTENE PRESSURE PIPES - TYPE PB 125 - PART 6: DIMENSIONS OF FITTINGS FOR RESISTANCE WELDING |
| EN 13244-2:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes |
| UNE-EN 12666-1:2006 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.