ISO 3353-1:2002
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Aerospace Lead and runout threads Part 1: Rolled external threads
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
16-12-2020
Superseded by
Language(s)
English, French
Published date
22-08-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 3353-1:2002 specifies the lead and runout requirements for rolled external threads for aerospace construction, and the inspection method to be used in case of dispute.
It is applicable whenever it is referenced in a definition document.
| DevelopmentNote |
Supersedes ISO/DIS 3353-1 (08/2002) Supersedes ISO 3353 (10/2002)
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| BS EN 4162:2016 | Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| I.S. EN 3294:2008 | AEROSPACE SERIES - BOLTS, T-HEAD, CLOSE TOLERANCE, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), UNCOATED FOR INCREASED HEIGHT NUTS - CLASSIFICATION: 1210 MPA/730 DEGREES C |
| BS ISO 13921:2008 | Aerospace. Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS EN 4156:2013 | Aerospace series. Rod ends, with self-aligning double row ball bearings and threaded shank in steel. Inner ring and balls in corrosion resisting steel. Dimensions and loads. Inch series |
| 05/30128674 DC : DRAFT FEB 2005 | ISO 3185 - AEROSPACE - BOLTS, NORMAL BIHEXAGONAL HEAD, NORMAL SHANK, SHORT OR MEDIUM-LENGTH MJ THREADS, METALLIC MATERIAL, COATED OR UNCOATED, STRENGTH CLASSES LESS THAN OR EQUAL TO 1100 MPA - DIMENSIONS |
| 16/30342255 DC : 0 | BS EN 8.3559 - AEROSPACE SERIES- SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SPIRAL DRIVE RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS ISO 3185:2008 | Aerospace. Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| NF EN 3636 : 2008 | AEROSPACE SERIES - SCREWS, REDUCED PAN HEAD, OFFSET CRUCIFORM RECESS, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 900 MPA/650 DEGREES C |
| NF EN 4634 : 2010 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| 17/30361847 DC : 0 | BS EN 4161 - AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 4636:2009 | Aerospace series. Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 4178:2017 | Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| BS EN 3614:2009 | Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 900 MPa/650°C |
| 17/30370987 DC : 0 | BS EN 3740 - AEROSPACE SERIES - BOLTS, SHOULDERED, THIN HEXAGONAL HEAD CLOSE TOLERANCE SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] DRYFILM COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| BS EN 4138:2016 | Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| BS EN 3636:2008 | Aerospace series. Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa/650°C |
| BS ISO 5856:2008 | Aerospace. Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| 16/30342253 DC : 0 | BS EN 8.3557 - AEROSPACE SERIES- SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SPIRAL DRIVE RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4178 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 16602-70-46:2014 | SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
| PREN 4128 : 200P3 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE SHANK, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4072 : 200P3 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4163 : 200P2 | AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4138 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4162 : 200P2 | AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 6029:2017 | AEROSPACE SERIES - ROD-ENDS, ADJUSTABLE, SINGLE FORK WITH UNJ THREADED SHANK MIN. ENGAGEMENT: 1,5 X THREAD DIAMETER IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| I.S. EN 4635:2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1270 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| I.S. EN 4132:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 4178:2017 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NF EN 3613 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601(INCONEL 718) SILVER PLATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| NF EN 4137 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL BIHEXAGONAL HEAD, STEPPED SHANK, LONG THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NF EN 4075 : 2008 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED, METRIC - CLASSIFICATION: 490 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| NF EN 3614 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA2601(A286), SILVER PLATED - CLASSIFICATION 900 MPA/650 DEGREES C |
| ISO 5856:2008 | Aerospace Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa Dimensions |
| NF EN 4035 : 2006 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE AND THREADED SHANK IN TITANIUM ALLOY - DIMENSIONS AND LOADS |
| BS EN 4311:2006 | Aerospace series. Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS<sub>2</sub> lubricated. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 3912:2007 | Aerospace series. Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated. Classification: 1100 MPa (at ambient temperature) / 650°C |
| BS EN 2888:2006 | Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) / 425°C |
| BS EN 3052:2009 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| BS EN 3324:2007 | Aerospace series. Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV535). Classification: 1000 MPa/550°C. Unplated |
| BS EN 3326:2007 | Aerospace series. Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718). Classification: 1275 MPa/650°C, unplated |
| BS EN 3444:2006 | Aerospace series. Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 1250 MPa (at ambient temperature) / 650°C |
| BS EN 2889:2006 | Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature) / 235°C |
| I.S. EN 4009:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 4036:2006 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING AND THREADED SHANK IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE - DIMENSIONS AND LOADS |
| I.S. EN 4035:2006 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE AND THREADED SHANK IN TITANIUM ALLOY - DIMENSIONS AND LOADS |
| BS EN 4128:2016 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1 250 MPa (at ambient temperature) / 425 °C |
| NF EN 4135 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| BS EN 4137:2009 | Aerospace series. Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| 06/30145493 DC : 0 | |
| I.S. EN 4137:2009 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, STEPPED SHANK, LONG THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| 16/30342252 DC : 0 | BS EN 8.3556 - AEROSPACE SERIES - SCREWS, PAN HEAD, SPIRAL DRIVE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 4072:2016 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE SHANK, SHORT THREAD IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| I.S. EN 4074:2009 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 16/30342246 DC : 0 | BS EN 8.3555 - AEROSPACE SERIES - SCREWS, PAN HEAD, SPIRAL DRIVE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| 13/30288691 DC : 0 | BS EN 4071 - AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 16/30342243 DC : 0 | BS EN 8.3554 - AEROSPACE SERIES - SCREWS, PAN HEAD, SPIRAL DRIVE RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| BS EN 4163:2016 | Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| I.S. EN 4134:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 16/30342254 DC : 0 | BS EN 8.3558 - AEROSPACE SERIES- SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SPIRAL DRIVE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 16602-70-46:2014 | Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
| NF EN 4127 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| NF EN 4635 : 2010 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1270 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| I.S. EN 4071:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4634 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| BIS IS 15469 : 2012 | AEROSPACE - BOLTS, NORMAL BIHEXAGONAL HEAD, NORMAL SHANK, SHORT OR MEDIUM LENGTH MJ THREADS, METALLIC MATERIAL, COATED OR UNCOATED, STRENGTH CLASSES LESS THAN OR EQUAL TO 1100 MPA - DIMENSIONS |
| NF EN 4636 : 2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN TITANIUM ALLOY TI-P64001, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 4130:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| I.S. EN 3636:2008 | AEROSPACE SERIES - SCREWS, REDUCED PAN HEAD, OFFSET CRUCIFORM RECESS, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FEPA92HT (A286), SILVER PLATED - CLASSIFICATION: 900 MPA/650 DEGREE C |
| BS EN 3725:2004 | Aerospace series. Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS<sub>2</sub> coated. Strength class: 1100 MPa (at ambient temperature) |
| BS EN 3536:2006 | Aerospace series. Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| BS EN 3301:2007 | Aerospace series. Bolts, T-head, close tolerance medium thread length in heat resisting steel FE-PM1708 (FV535), uncoated. Classification: 1000 MPa/550°C |
| I.S. EN 3725:2005 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, NORMAL SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P64001, ANODIZED, MOS[2] COATED - STRENGTH CLASS: 1100 MPA (AT AMBIENT TEMPERATURE) |
| I.S. EN 3832:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 4352:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD WITH LOCKWIRE HOLES, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), MOS[2] COATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| I.S. EN 4322:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD WITH LOCKWIRE HOLES, RELIEVED SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P64001, ANODIZED, MOS[2] COATED - STRENGTH CLASS: 1100 MPA (AT AMBIENT TEMPERATURE) |
| I.S. EN 4321:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD WITH LOCKWIRE HOLES, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKELBASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 2888:2006 | AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| EN 4036:2006 | Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads |
| I.S. EN 2549:2006 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| EN 4035:2006 | Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads |
| I.S. EN 3907:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, NORMAL SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P64001, MOS[2] COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/350 DEGREE C |
| I.S. EN 3820:2017 | AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| I.S. EN 2889:2006 | AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 4323:2005 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBE RECESS, THREADED TO HEAD, IN TITANIUM ALLOY TI-P64001, ANODIZED, MOS[2] COATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/350 DEGREE C |
| I.S. EN 2859:2006 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED, METRIC SERIES - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| BS EN 4073:2016 | Aerospace series. Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| 06/30145490 DC : 0 | EN 4634 - AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601, PASSIVATED - CLASSIFICATION - 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 3614:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - CLASSIFICATION: 900 MPA/650 DEGREES C |
| 16/30342237 DC : 0 | BS EN 8.3553 - AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SPIRAL DRIVE RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| BS EN 4136:2009 | Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa at ambient temperature)/235°C |
| BS EN 4134:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature)/425°C |
| 13/30290134 DC : 0 | BS EN 4162 - AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 3328:2008 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING STEEL FE-PM38 (FV535), UNCOATED - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| I.S. EN 4075:2008 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 490 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 05/30128677 DC : DRAFT FEB 2005 | ISO 3193 - AEROSPACE - BOLTS, NORMAL HEXAGONAL HEAD, NORMAL SHANK, SHORT OR MEDIUM-LENGTH MJ THREADS, METALLIC MATERIAL, COATED OR UNCOATED, STRENGTH CLASSES LESS THAN OR EQUAL TO 1100 MPA - DIMENSIONS |
| 13/30288694 DC : 0 | BS EN 4073 - AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS ISO 3186:2008 | Aerospace. Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa. Dimensions |
| ISO 3185:2008 | Aerospace Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa Dimensions |
| BS EN 3686:2008 | Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1100 MPa/650°C |
| 16/30342183 DC : 0 | BS EN 8.3552 - AEROSPACE SERIES- SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SPIRAL DRIVE RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 05/30128686 DC : DRAFT FEB 2005 | ISO 13921 - AEROSPACE - SCREWS, 100 DEGREES REDUCED COUNTERSUNK HEAD, INTERNAL OFFSET CRUCIFORM RIBBED OR UNRIBBED DRIVE, NORMAL SHANK, SHORT OR MEDIUM-LENGTH MJ THREADS, METALLIC MATERIAL, COATED OR UNCOATED, STRENGTH CLASSES LESS THAN OR EQUAL TO 1100 MPA - DIMENSION |
| I.S. EN 3613:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1275 MPA/650 DEGREE C |
| BS EN 4127:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/ 425 °C |
| BS EN 4075:2008 | Aerospace series. Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated. Classification: 490 MPa (at ambient temperature) / 425 °C |
| 05/30128695 DC : DRAFT FEB 2005 | ISO 9255 - AEROSPACE - BOLTS, NORMAL SPLINE HEAD, NORMAL SHANK, SHORT OR MEDIUM-LENGTH MJ THREADS, METALLIC MATERIAL, COATED OR UNCOATED, STRENGTH CLASSES LESS THAN OR EQUAL TO 1100 MPA - DIMENSIONS |
| PREN 4156 : 200P2 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS INCH SERIES |
| 07/30165636 DC : 0 | BS EN 4636 - AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN TITANIUM ALLOY TI-P64001, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4635 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1270 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| NF EN 4499 : 2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK REDUCED HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| ONORM EN 4035 : 2006 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE AND THREADED SHANK IN TITANIUM ALLOY - DIMENSIONS AND LOADS |
| I.S. EN 4636:2009 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN TITANIUM ALLOY TI-P64001, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| I.S. EN 4634:2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| ISO 3186:2008 | Aerospace — Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MPa to 1 800 MPa — Dimensions |
| ISO 3193:2008 | Aerospace Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa Dimensions |
| NF EN 4074 : 2010 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| NF EN 4132 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 4071 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| BS EN 4161:2009 | Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235 °C |
| I.S. EN 4131:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| I.S. EN 3686:2008 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| BS EN 4198:2006 | Aerospace series. Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel. Dimensions and loads |
| BS EN 4498:2005 | Aerospace series. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating. Classification: 1 550 MPa (at ambient temperature) / 315 °C |
| EN 4497:2005 | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 3832:2004 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 550 MPa (at ambient temperature) / 650 °C |
| EN 2889:2006 | Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C |
| UNI EN 4156 : 2014 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| UNI EN 4131 : 2013 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| ISO 13921:2008 | Aerospace — Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions |
| 14/30296344 DC : 0 | BS EN 3820 - AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION; 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| ISO 9255:2008 | Aerospace Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa Dimensions |
| BS EN 4130:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| BS EN 4129:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C |
| BS EN 4634:2009 | Aerospace series. Screws, 100° countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated. Classification: 900 MPa (at ambient temperature)/650°C |
| 13/30290108 DC : 0 | BS EN 4128 - AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| BS EN 4072:2016 | Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| BS EN 3294:2008 | Aerospace series. Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts. Classification: 1210 MPa/730°C |
| BS ISO 3193:2008 | Aerospace. Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS EN 4499:2009 | Aerospace series. Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4635:2009 | Aerospace series. Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1270 MPa (at ambient temperature) / 650 °C |
| 13/30290264 DC : 0 | BS EN 4163 - AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| 13/30290082 DC : 0 | BS EN 4072 - AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 07/30165635 DC : 0 | BS EN 4635 - AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718). CLASSIFICATION: 1270 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| I.S. EN 4135:2009 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 4499:2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK REDUCED HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| BS EN 4135:2009 | Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| BS EN 4133:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| BS EN 3613:2009 | Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NIPH2601 (Inconel 718), silver plated. Classification: 1275 MPa/650 °C |
| I.S. EN 4073:2016 | AEROSPACE SERIES - SCREWS, PAN HEAD, HEXALOBULAR RECESS, COARSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS ISO 9255:2008 | Aerospace. Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions |
| BS EN 3323:2009 | Aerospace series. Bolts with double hexagon head, relieved shank, long thread, in heat resisting steel FE-PM 38 (FV 535). Classification: 1000 MPa/550 °C |
| BS EN 3724:2004 | Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS<sub>2</sub> coated. Strength class: 1100 MPa (at ambient temperature) |
| BS EN 4131:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature) / 425 °C |
| BS EN 3328:2008 | Aerospace series. Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting steel FE-PM38 (FV535), uncoated. Classification: 1000 MPa/550 °C |
| BS EN 3293:2008 | Aerospace series. Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated. Classification: 1275 MPa/650°C |
| NF EN 3328 : 2008 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING STEEL FE-PM38 (FV535), UNCOATED - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| NF EN 4136 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 3686 : 2009 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| PREN 4073 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 4156:2013 | AEROSPACE SERIES - ROD ENDS, WITH SELFALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| ISO 9219:2002 | Aerospace — Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated — Dimensions and masses |
| I.S. EN 4136:2009 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 4138:2016 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 3323:2009 | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK LONG THREAD, - IN HEAT RESISTING STEEL FE-PM 38 (FV 535) - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| I.S. EN 3293:2008 | AEROSPACE SERIES - BOLTS, T-HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), UNCOATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| I.S. EN 3724:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P64001, MOS[2] COATED - STRENGTH CLASS: 1100 MPA (AT AMBIENT TEMPERATURE) |
| I.S. EN 3327:2008 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), UNCOATED - CLASSIFICATION: 1275 MPA/650 DEGREE C |
| I.S. EN 4127:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM 4D COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| BS EN 4009:2004 | Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1550 MPa (at ambient temperature) |
| BS EN 3820:2017 | Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/315 °C |
| BS EN 4509:2006 | Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature)/315°C |
| BS EN 4496:2005 | Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4035:2006 | Aerospace series. Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy. Dimensions and loads |
| BS EN 4424:2006 | Aerospace series. Rod-ends, adjustable single fork and threaded shank with engagement: 1,5 x thread diameter in titanium alloys. Dimensions and loads |
| BS EN 4495:2006 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 4074:2009 | Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/425°C |
| BS EN 4501:2006 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C |
| ONORM EN 4161 : JUN 2010 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 2549:2006 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium, anodized, MoS<sub>2</sub> lubricated. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 3907:2004 | Aerospace series. Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS<sub>2</sub> coated. Classification: 1100MPa (at ambient temperature)/350°C |
| EN 4135:2009 | Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 4075:2008 | Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated - Classification: 490 MPa (at ambient temperature) / 425 °C |
| EN 3820:2017 | Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 3328:2008 | Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting steel FE-PM38 (FV535), uncoated - Classification: 1 000 MPa/550 °C |
| EN 4495:2006 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 3725:2004 | Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated - Strength class: 1 100 MPa (at ambient temperature) |
| EN 4073:2016 | Aerospace series - Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 4156:2013 | Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in steel - Inner ring and balls in corrosion resisting steel - Dimensions and loads - Inch series |
| EN 4498:2005 | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1 550 MPa (at ambient temperature) / 315 °C |
| EN 3636:2008 | Aerospace series - Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa/650 °C |
| EN 4132:2009 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 3614:2009 | Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 900 MPa / 650 °C |
| EN 4074:2009 | Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 3323:2009 | Aerospace series - Bolts with double hexagon head, relieved shank. long thread, - In heat resisting steel FE-PM 38 (FV 535) - Classification: 1 000 MPa/550 °C |
| EN 16602-70-46:2014 | Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
| EN 4634:2009 | Aerospace series - Screws, 100° countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated - Classification: 900 MPa (at ambient temperature) / 650 °C |
| EN 3907:2004 | Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Classification: 1 100 MPa (at ambient temperature) / 350 °C |
| EN 4133:2009 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 3294:2008 | Aerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts -Classification: 1 210 MPa/730 °C |
| EN 2549:2006 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 4499:2009 | Aerospace series - Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 4009:2004 | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 550 MPa (at ambient temperature) / 650 °C |
| EN 4636:2009 | Aerospace series - Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 3325:2007 | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel, FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Unplated |
| EN 3327:2008 | Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1 275 MPa/650 °C |
| EN 4198:2006 | Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads |
| EN 4312:2006 | Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 4178:2017 | Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 6029:2017 | Aerospace series - Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel - Dimensions and loads - Inch series |
| EN 4071:2009 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 4311:2006 | Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 315 °C |
| EN 4128:2016 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425 °C |
| EN 4137:2009 | Aerospace series - Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 3912:2007 | Aerospace series - Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated - Classification: 1 100 MPa (at ambient temperature) / 650 °C |
| EN 4163:2016 | Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 2859:2006 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 3613:2009 | Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 275 MPa/650 °C |
| EN 3293:2008 | Aerospace series - Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1 275 MPa/650 °C |
| EN 3444:2006 | Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1 250 MPa (at ambient temperature) /650 C |
| EN 3052:2009 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 4127:2009 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| EN 4424:2006 | Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter in titanium alloys - Dimensions and loads |
| EN 3536:2006 | Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 4138:2016 | Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| EN 4134:2009 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425°C |
| EN 4509:2006 | Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 2888:2006 | Aerospace series - Metric Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C |
| EN 3724:2004 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Strength Class: 1 100 MPa (at ambient temperature) |
| EN 4635:2009 | Aerospace series - Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 270 MPa (at ambient temperature) / 650 °C |
| EN 3324:2007 | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Unplated |
| EN 3326:2007 | Aerospace series - Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718) - Classification: 1 275 MPa/650 °C, unplated |
| EN 3301:2007 | Aerospace series - Bolts, T-head, close tolerance medium thread length in heat resisting steel FE-PM1708 (FV535), uncoated - Classification: 1 000 MPa/550 °C |
| 13/30288693 DC : 0 | BS EN 4138 - AEROSPACE SERIES- SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 4132:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C |
| 13/30288692 DC : 0 | BS EN 4178 - AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 4161:2009 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| BS EN 4071:2009 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| NF EN 3323 : 2009 | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK LONG THREAD, IN HEAT RESISTING STEEL FE-PM38 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| BS EN 3327:2008 | Aerospace series. Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated. Classification: 1275 MPa/650 °C |
| BS EN 3687:2010 | Aerospace series. Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated.Classifi cation: 1100 MPa/650 °C |
| 05/30128689 DC : DRAFT FEB 2005 | ISO 3186 - AEROSPACE - BOLTS, LARGE BIHEXAGONAL HEAD, NORMAL SHANK, SHORT OR MEDIUM-LENGTH MJ THREADS, METALLIC MATERIAL, COATED OR UNCOATED, STRENGTH CLASSES 1 250 MPA TO 1800 MPA - DIMENSION |
| NF EN 3327 : 2008 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), UNCOATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| 06/30145496 DC : 0 | EN 4636 - AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN TITANIUM ALLOY TI-P64001, MOS[2] COATED - CLASSIFICATION - 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| 07/30165634 DC : 0 | BS EN 4634 - AEROSPACE SERIES - SCREW, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN STEEL FE-PA2601, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE 650 DEGREES C) |
| UNI EN 3687 : 2011 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| PREN 4636 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN TITANIUM ALLOY TI-P64001, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| 05/30128680 DC : DRAFT FEB 2005 | ISO 5856 - AEROSPACE - SCREWS, 100 DEGREES NORMAL COUNTERSUNK HEAD, INTERNAL OFFSET CRUCIFORM RIBBED OR UNRIBBED DRIVE, NORMAL SHANK, SHORT- OR MEDIUM-LENGTH MJ THREADS, METALLIC MATERIAL, COATED OR UNCOATED, STRENGTH CLASSES LESS THAN OR EQUAL TO 1100 MPA - DIMENSION |
| I.S. EN 4128:2016 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE SHANK, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 3820 : 200P3 | AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 4133:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| I.S. EN 4163:2016 | AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 4161 : 2010 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 3687:2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| I.S. EN 4129:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 4162:2016 | AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 4129 : 2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 6029:2017 | Aerospace series. Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel. Dimensions and loads. Inch series |
| BS EN 3325:2007 | Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel, FE-PM1708 (FV535). Classification: 1000 MPa/550°C. Unplated |
| BS EN 2859:2006 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C |
| BS EN 4036:2006 | Aerospace series. Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads |
| BS EN 3832:2004 | Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1550 MPa (at ambient temperature) / 650°C |
| BS EN 4312:2006 | Aerospace series. Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 4497:2005 | Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| PREN 6098 : DRAFT 2018 | AEROSPACE SERIES - ROD-END WITH BEARING PER EN 6097 IN CORROSION RESISTING STEEL, EXTRA WIDE INNER RING, EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6055 : DRAFT 2018 | AEROSPACE SERIES - ROD-END WITH BEARING PER EN 4265 IN CORROSION RESISTING STEEL, EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6133 : DRAFT 2018 | AEROSPACE SERIES - ROD-END, WITH BEARING PER EN 6096, WITH SELF-LUBRICATING LINER IN CORROSION RESISTING STEEL, EXTRA WIDE INNER RING, EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6029 : 200P2 | AEROSPACE SERIES - ROD-ENDS, ADJUSTABLE, SINGLE FORK WITH UNJ THREADED SHANK MIN. ENGAGEMENT: 1,5 X THREAD DIAMETER IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6056 : DRAFT 2018 | AEROSPACE SERIES - ROD-END WITH BEARING PER EN 4614 WITH SELF LUBRICATING LINER IN CORROSION RESISTING STEEL WITH EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.