ISO 3171:1988
Current
Current
The latest, up-to-date edition.
Petroleum liquids — Automatic pipeline sampling
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
29-12-1988
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Recommends procedures for crude oil and liquid petroleum products being conveyed by pipeline. Does not apply to liquefied petroleum gases and liquefied natural gases. The principal purpose ist to give guidelines for specifying, testing, operating, maintaining and monitoring crude oil samples.
| Committee |
ISO/TC 28/SC 2
|
| DocumentType |
Standard
|
| Pages |
55
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 3171 : 1999 | Identical |
| BS 2000-476(2002) : 2002 | Identical |
| NEN EN ISO 3171 : 1999 | Identical |
| I.S. EN ISO 3171:1999 | Identical |
| PN EN ISO 3171 : 2007 | Identical |
| SN EN ISO 3171 : 2000 | Identical |
| UNI EN ISO 3171 : 2001 | Identical |
| SS-EN ISO 3171:1999 | Identical |
| UNE-EN ISO 3171:1999 | Identical |
| BS 3195-2:1989 | Identical |
| BS EN ISO 3171:1999 | Identical |
| EN ISO 3171:1999 | Identical |
| DIN EN ISO 3171:2000-11 | Identical |
| NF ISO 3171 : 1989 | Identical |
| NBN ISO 3171 : 1991 | Identical |
| PNE-prEN ISO 3171 | Identical |
| BS 2000-609(2012) : 2012 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS EN 15199-3:2008 | Petroleum products. Determination of boiling range distribution by gas chromatography method Crude oil |
| ISO 10337:1997 | Crude petroleum — Determination of water — Coulometric Karl Fischer titration method |
| DIN EN 16136:2015-04 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| 14/30294041 DC : 0 | BS EN 16709 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 OR B30) - REQUIREMENTS AND TEST METHODS |
| 10/30228224 DC : 0 | BS EN 16136 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| S.R. CEN TR 15367-2:2007 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 2: AUTOMOTIVE PETROL FUELS |
| BS EN 16329:2013 | Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method |
| I.S. EN 14078:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| I.S. EN 12662:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| 09/30205523 DC : 0 | BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| BS 2000-579(2009) : 2009 COR 2010 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS 2000-602(2013) : 2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013) |
| BS EN 16761-1:2015 | Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using single column technique |
| BS EN ISO 22854:2016 | Liquid petroleum products. Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel. Multidimensional gas chromatography method |
| I.S. EN 16144:2012 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD |
| I.S. EN 116:2015 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| S.R. CWA 15940:2009 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| 11/30214536 DC : 0 | BS EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
| UNE-EN 16934:2018 | Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE |
| BS 2000-465(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| 13/30274224 DC : 0 | BS EN 14078 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| 03/300854 DC : DRAFT JAN 2003 | ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS EN 15938:2010 | Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity |
| DIN 55679 : 1985 | PAINTS, VARNISHES AND RELATED PRODUCTS; DETERMINATION OF FLASHPOINT; RAPID EQUILIBRIUM METHOD |
| 07/30172878 DC : 0 | BS ISO 10307-1 - PETROLEUM PRODUCTS - TOTAL SEDIMENT IN RESIDUAL FUEL OILS - PART 1: DETERMINATION BY HOT FILTRATION |
| ISO 6249:1999 | Petroleum products Determination of thermal oxidation stability of gas turbine fuels JFTOT method |
| DIN EN 15794:2010-02 | Determination of explosion points of flammable liquids |
| ISO/TR 9494:1997 | Petroleum liquids — Automatic pipeline sampling — Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids |
| API MPM CH17.9 : 2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17 - MARINE MEASUREMENT - SECTION 9 - VESSEL EXPERIENCE FACTOR (VEF) |
| 14/30294038 DC : 0 | BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHY METHOD |
| BS ISO/TR 9494:1997 | Petroleum liquids. Automatic pipeline sampling. Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids |
| 11/30249539 DC : 0 | BS EN 590 - AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| NF EN ISO 13032 : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF LOW CONCENTRATION OF SULFUR IN AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| BS 2000-606(2015) : 2015 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| BS EN 15794:2009 | Determination of explosion points of flammable liquids |
| BS EN 16143:2013 | Petroleum products. Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils. Procedure using double LC cleaning and GC/MS analysis |
| I.S. EN 14522:2005 | DETERMINATION OF THE AUTO IGNITION TEMPERATURE OF GASES AND VAPOURS |
| BS EN 16135:2011 | Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS) |
| 09/30205353 DC : 0 | BS EN ISO 20846 - PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD |
| 08/30181966 DC : DRAFT MAY 2008 | BS ISO 13739 - PETROLEUM PRODUCTS - PROCEDURES FOR THE TRANSFER OF BUNKER FUEL TO SHIPS |
| 11/30244505 DC : 0 | BS EN 16294 - PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICPOES) |
| DD CEN/TS 15293:2011 | Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods |
| BS EN 15944:2010 | Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| 12/30264358 DC : 0 | BS EN 1601 - LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID) |
| IP 606 : 2016 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| BS ISO 6296:2000 | Methods of test for petroleum and its products. Petroleum product. Determination of water. Potentiometric Karl Fischer titration method |
| DIN EN 15940:2016-09 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| IP 433 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| EI 1570 : 2012 | HANDBOOK ON ELECTRONIC SENSORS FOR THE DETECTION OF PARTICULATE MATTER AND/OR FREE WATER DURING AIRCRAFT REFUELLING |
| BIS IS 1448-16 : 2014 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 16: CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS - LABORATORY DETERMINATION OF DENSITY - HYDROMETER METHOD |
| I.S. EN 16785-1:2015 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| API MPM TR 2570 : 2010 | CONTINUOUS ON-LINE MEASUREMENT OF WATER CONTENT IN PETROLEUM (CRUDE OIL AND CONDENSATE) |
| PREN ISO 13736 : DRAFT 2011 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
| BS 2000-412(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS |
| I.S. EN 238:1996 | LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| IP 309 : 2016 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| I.S. EN 16934:2017 | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| S.R. CEN/TS 15940:2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16143:2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| S.R. CEN/TS 16640:2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| I.S. EN 16715:2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| I.S. EN 12177:1998 | LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF BENZENE CONTENT BY GAS CHROMATOGRAPHY |
| BS 2000-582(2016) : 2016 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD (ISO 3924:2016) |
| UNE-EN 15779:2010 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (>= 4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography |
| BS 2000-595(2011) : 2011 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| ISO/TR 13739:1998 | Petroleum products Methods for specifying practical procedures for the transfer of bunker fuels to ships |
| ISO 15167:1999 | Petroleum products Determination of particulate content of middle distillate fuels Laboratory filtration method |
| UNI EN ISO 9038 : 2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS |
| BS EN 12916:2016 | Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection |
| ISO 13739:2010 | Petroleum products Procedures for transfer of bunkers to vessels |
| DIN EN 16997:2016-05 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| IP 143 : 2015 | DETERMINATION OF ASPHALTENES (HEPTANE INSOLUBLES) IN CRUDE PETROLEUM AND PETROLEUM PRODUCTS |
| 17/30363912 DC : 0 | BS EN 17178 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE |
| BS 2000-123(2011) : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE (ISO 3405:2011) |
| I.S. EN 16640:2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS 2000-388(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY OF MIDDLE-DISTILLATE FUELS |
| BS 2000-547(2006) : 2006 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS 2000-574(2014) : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| I.S. EN 13016-3:2018 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD) |
| EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| UNI EN ISO 20846 : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD |
| I.S. EN ISO 20846:2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD (ISO 20846:2011) |
| I.S. EN ISO 20884:2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN 228:2017 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 6246:2017 | PETROLEUM PRODUCTS - GUM CONTENT OF FUELS - JET EVAPORATION METHOD (ISO 6246:2017) |
| I.S. EN 15553:2007 | PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
| BS EN 14538:2006 | Fat and oil derivatives. Fatty acid methyl ester (FAME). Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| BS EN ISO 12937:2001 | Methods of test for petroleum and its products. BS 2000-438. Petroleum products. Determination of content. Coulometric Karl Fischer titration method |
| BS EN ISO 9038:2013 | Determination of sustained combustibility of liquids |
| BS EN 14517:2004 | Methods of test for petroleum and its products. BS 2000-526: Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method |
| BS EN ISO 5164:2014 | Petroleum products. Determination of knock characteristics of motor fuels. Research method |
| BS EN 15199-2:2006 | Petroleum products. Determination of boiling range distribution by gas chromatography method Heavy distillates and residual fuel |
| BS EN 12662:2014 | Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| BS EN 14077:2003 | Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method |
| UNE-EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| ISO 5164:2014 | Petroleum products — Determination of knock characteristics of motor fuels — Research method |
| BS EN ISO 6246:1998 | Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method |
| BS EN 14078:2014 | Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| DIN EN 15938:2010-12 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| EN 12766-1:2000 | Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
| DIN EN 228:2004-03 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| DIN EN 15944:2011-02 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| DIN EN 15199-1:2007-01 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils |
| DIN EN ISO 5164:2014-10 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014) |
| EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| CEN/TS 16640:2014 | Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method |
| DIN ISO 6614:2002-04 | PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS |
| DIN EN ISO 20847:2004-07 | Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004) |
| EN 12634:1998 | Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method |
| DIN EN 1601:2017-10 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| EN ISO 20884:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011) |
| DIN EN ISO 8754:2003-12 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| EN 13016-2:2007 | Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure(AVP) between 40 C and 100 C |
| EN 12662:2014 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| ONORM EN 16329 : 2013 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| ONORM EN 16568 : 2015 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| ONORM EN ISO 3679 : 2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
| ONORM EN 15195 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| BS EN 16734 : 2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16734:2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| DIN EN 16294:2013-02 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS ISO 3987:2010 | Petroleum products. Determination of sulfated ash in lubricating oils and additives |
| UNI EN ISO 13032 : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF LOW CONCENTRATION OF SULFUR IN AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| 02/122316 DC : DRAFT MAY 2002 | ISO/DIS 20884 - PETROLEUM PRODUCTS - DETERMINATION OF LOW SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| PD CEN/TR 16557:2013 | Automotive fuels. High FAME diesel fuel blends (B11-B30). Background to the parameters required and their respective limits and determination |
| BS EN 16997:2017 | Liquid petroleum products. Determination of the sulfur content in Ethanol (E85) automotive fuel. Wavelength dispersive X-ray fluorescence spectrometric method |
| PREN 12662 : DRAFT 2012 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| EI HM 49 : 2012 | MARINE MEASUREMENT - SECTION 9 - VESSEL EXPERIENCE FACTOR (VEF) |
| BS 2000-606(2012) : 2012 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL - GAS CHROMATOGRAPHIC METHOD |
| BS 2000-57(1995) : 1995 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE SMOKE POINT OF KEROSINE |
| BS 2000-447(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| BS EN 16715:2015 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| PREN 16135 : DRAFT 2010 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (AAS) |
| I.S. EN 16709:2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| DIN ISO 3733:2003-02 | PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS - DETERMINATION OF WATER - DISTILLATION METHOD |
| 13/30277780 DC : 0 | BS EN 16576 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DISTILLATE FUELS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS 4385-1(1991) : AMD 8663 | METHODS FOR DETERMINATION OF WATER IN CRUDE PETROLEUM, PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS BY DISTILLATION |
| EI HM 56 : 2010 | CONTINUOUS ON-LINE MEASUREMENT OF WATER CONTENT IN PETROLEUM (CRUDE OIL AND CONDENSATE) |
| BS 2000-454(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF PHOSPHORUS IN GASOLINE - SPECTROPHOTOMETRIC METHOD |
| BS ISO/TR 13739:1998 | Petroleum products. Methods of specifying practical procedures for the transfer of bunker fuels to ships |
| 08/30183846 DC : DRAFT AUG 2008 | BS EN 14078 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| 08/30175752 DC : DRAFT JAN 2008 | BS ISO 3987 - PETROLEUM PRODUCTS - DETERMINATION OF SULFATED ASH IN LUBRICATING OILS AND ADDITIVES |
| DIN EN 16761-1:2016-02 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| 12/30261072 DC : 0 | BS ISO 4261 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF GAS TURBINE FUELS FOR INDUSTRIAL AND MARINE APPLICATIONS |
| PD ISO/TR 19686-1:2014 | Petroleum products. Equivalency of test method determining the same property Atmospheric distillation of petroleum products |
| BS EN 16270:2015 | Automotive fuels. Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel. Gas chromatographic method |
| 06/30149512 DC : DRAFT APR 2006 | EN ISO 14596 - PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| 12/30268200 DC : 0 | BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| 15/30325297 DC : 0 | BS EN 16896 - PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER VISCOMETER |
| 12/30261556 DC : 0 | BS ISO 5163 - PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD |
| BS EN 16144:2012 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method |
| 03/300855 DC : DRAFT JAN 2003 | ISO 3680 - DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS EN ISO 16591:2010 | Petroleum products. Determination of sulfur content. Oxidative microcoulometry method |
| BS 2000-53(1999) : 1999 | CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD |
| DIN EN 15751 E : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| EN ISO 9038:2013 | Determination of sustained combustibility of liquids (ISO 9038:2013) |
| BS 2000-524(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-524: DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| PREN 13016-3 : DRAFT 2016 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD) |
| ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
| PREN 15195 : DRAFT 2013 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| DIN EN ISO 13032:2012-06 | Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012) |
| 18/30358441 DC : DRAFT APR 2018 | BS EN ISO 3016 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF POUR POINT |
| BS ISO 9403:2000 | Crude petroleum. Transfer accountability. Guidelines for cargo inspection |
| PREN 17057 : DRAFT 2016 | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID |
| PREN ISO 5164 : DRAFT 2012 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO/DIS 5164:2012) |
| BS EN 15199-4:2015 | Petroleum products. Determination of boiling range distribution by gas chromatography method Light fractions of crude oil |
| BS 2000-170(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND OTHER LIQUIDS - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
| BS 2000-480(2006) : 2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS |
| BS 2000-589(2015) : 2015 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| IP 14 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - RAMSBOTTOM METHOD |
| I.S. EN 15199-3:2008 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| BS EN ISO 12156-1:2016 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| PREN 16761-2 : DRAFT 2014 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| UNE-EN 16896:2017 | Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter |
| BS 2000-588(2011) : 2011 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BIS IS 1448-122 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 122: PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - CONRADSON METHOD |
| BS 2000-356(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD |
| BS 2000-456(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF POTASSIUM IN GASOLINE - ATOMIC ABSORPTION SPECTROMETRY (AAS) METHOD |
| BS 2000-365(1996) : 1996 | METHOD OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM AND PETROLEUM PRODUCTS - DETERMINATION OF DENSITY - OSCILLATING U-TUBE METHOD |
| BS 2000-236(2014) : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014) |
| IP 412 : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS |
| BIS IS 1448-27 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 27: DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
| I.S. EN 16136:2015 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| I.S. EN 16091:2011 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| ISO 3734:1997 | Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method |
| BS 2000-462(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-462: PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 1: SEPARATION AND DETERMINATION OF SELECTED PCB CONGENERS BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD) |
| ISO 4262:1993 | Petroleum products — Determination of carbon residue — Ramsbottom method |
| BS EN 16136:2015 | Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| ISO 6250:1997 | Petroleum products Determination of the water reaction of aviation fuels |
| UNE-EN 16997:2017 | Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method |
| ISO 3012:1999 | Petroleum products Determination of thiol (mercaptan) sulfur in light and middle distillate fuels Potentiometric method |
| BS EN 16709 : 2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| EN 16734:2016 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
| UNE-EN 16136:2015 | Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| BS 2000-143(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF ASPHALTENES (HEPTANE INSOLUBLES) IN CRUDE PETROLEUM AND PETROLEUM PRODUCTS |
| BS EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNI EN 15779 : 2013 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS 2000-34(2016) : 2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| BS 2000-143(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 143: DETERMINATION OF ASPHALTENES (HEPTANE INSOLUBLES) IN CRUDE PETROLEUM AND PETROLEUM PRODUCTS |
| UNI EN 15794 : 2009 | DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| UNI EN ISO 13736 : 2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
| ISO 8691:1994 | Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing |
| I.S. EN 237:2004 | LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY |
| I.S. EN 12916:2016 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| UNI EN ISO 20884 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| DIN EN 1601:2016-06 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| DIN EN 13016-2:2007-11 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40 DEGREE C AND 100 DEGREE C |
| DIN EN 12662:2014-07 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| DIN EN ISO 9038:2013-12 | Determination of sustained combustibility of liquids (ISO 9038:2013) |
| UNE-EN 1601:2018 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| DIN EN 14214:2014-06 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 9029:1997 | Methods of test for petroleum and its products. Crude petroleum. Determination of water. Distillation method |
| BS EN ISO 20847:2004 | Methods of test for petroleum and its products. BS 2000-496. Petroleum products. Determination of the sulfur content of automotive fuels. Energy-dispersive X-ray fluorescence spectrometry |
| UNE-EN ISO 20846:2012 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) |
| ISO 3735:1999 | Crude petroleum and fuel oils Determination of sediment Extraction method |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| UNE-EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
| I.S. EN ISO 14596:2007 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN ISO 9038:2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013) |
| I.S. EN ISO 8754:2003 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN 15199-2:2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS |
| I.S. EN ISO 5164:2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014) |
| I.S. EN ISO 13736:2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
| I.S. EN 15199-1:2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS |
| DIN EN 12662:1998-10 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| EN 14112:2016 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
| I.S. EN ISO 3170:2004 | PETROLEUM LIQUIDS - MANUAL SAMPLING |
| DIN ISO 15597:2006-01 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-503: DETERMINATION OF CHLORINE AND BROMINE CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| EN 15199-1:2006 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils |
| EN 15199-3:2008 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil |
| NF EN ISO 20884 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULPHUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN 14112:2016 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| EN 15199-2:2006 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels |
| I.S. EN ISO 2719:2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| I.S. EN ISO 3679:2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
| DIN EN 16640:2017-08 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS 3900-A8:1986 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Test for flash/no flash (closed cup equilibrium method) |
| ONORM EN 16091 : 2012 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| BS 3195-1:1989 | Methods for sampling petroleum products Manual sampling of liquid hydrocarbons |
| BS 3900-A13:1986 | Methods of test for paints Test for flash/no flash (rapid equilibrium method) |
| BS 3900-A9:1986 | Methods of test for paints Determination of flashpoint (closed cup equilibrium method) |
| BS 4726:1986 | Methods for sampling raw materials for paints and varnishes |
| BS 2000-16(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE FREEZING POINT OF AVIATION FUELS |
| BS EN 16576:2014 | Automotive fuels. Determination of manganese and iron content in diesel. Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| UNI EN 15751 : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| BS EN ISO 2592:2017 | Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
| BS EN 15751:2014 | Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method |
| EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| 12/30263877 DC : 0 | BS EN ISO 22854 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN AUTOMOTIVE-MOTOR GASOLINE - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| I.S. EN ISO 3680:2004 | DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| 10/30216576 DC : 0 | BS EN 16091 - LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| PD CEN/TR 15367-3:2009 | Petroleum products. Guide for good housekeeping Prevention of cross contamination |
| 14/30300905 DC : 0 | BS EN 16761-2 - AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| I.S. EN ISO 5163:2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014) |
| 02/122315 DC : DRAFT MAY 2002 | ISO/DIS 20847 - PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT OF AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| 13/30282501 DC : 0 | BS EN 15195 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| 09/30196077 DC : 0 | BS ISO 3405 - PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| BS 2000-309(2015) : 2015 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| 11/30197271 DC : DRAFT NOV 2011 | BS EN ISO 9038 - DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS |
| 09/30199323 DC : 0 | BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL REQUIREMENTS AND TEST METHODS |
| DIN EN 15779:2013-12 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (<groesser |
| 14/30295249 DC : 0 | BS EN 16715 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| BS EN 16640:2017 | Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method |
| BS 2000-156(2007) : 2007 | PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
| I.S. EN 16896:2016 | PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER |
| BS 2000-433(1999) : 1999 | PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVELENGTH-DISPERSIVE S-RAY FLUORESCENCE SPECTROMETRY (IDENTICAL WITH IP 433/1999) |
| BS 2000-600(2012) : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF LOW CONCENTRATION OF SULFUR IN AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD (ISO 13032:2012) |
| BS ISO 9038 : 2002 AMD 15159 | TEST FOR SUSTAINED COMBUSTIBILITY OF LIQUIDS |
| 08/30184585 DC : DRAFT JUNE 2008 | BS EN ISO 3924 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD |
| 10/30228221 DC : 0 | BS EN 16135 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (AAS) |
| BS EN 16761-2:2015 | Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using heart cut technique |
| 16/30339201 DC : 0 | BS EN 1601 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| 11/30251420 DC : 0 | BS EN 16329 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| BS EN 16934:2017 | Automotive fuels and fat and oil derivates, Determination of steryl glycosides in fatty acid methyl esters (FAME). Method by GC-MS with prior purification by SPE |
| BS ISO 6245 : 2001 AMD 15249 | PETROLEUM PRODUCTS - DETERMINATION OF ASH |
| DIN EN 15751:2014-06 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| BS ISO 17308:2015 | Petroleum products and other liquids. Ethanol. Determination of electrical conductivity |
| I.S. EN 15199-4:2015 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL |
| UNE-EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| 14/30298209 DC : 0 | BS EN 16734 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| BS 2000-489(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF LOW LEAD CONTENTS IN GASOLINES - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF) |
| BS 2000-523(2015) : 2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| 15/30301302 DC : 0 | BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| 11/30242687 DC : DRAFT APR 2011 | BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS IN PETROL - GAS CHROMATOGRAPHIC METHOD |
| BIS IS 1448-30 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 30: CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD |
| 16/30346963 DC : 0 | BS EN 17057 - AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID |
| 09/30185734 DC : 0 | BS EN 116/BS 2000-309 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT |
| 12/30266121 DC : 0 | BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| 14/30304809 DC : 0 | BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| 06/30149412 DC : 0 | EN ISO 22854 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| 18/30358429 DC : DRAFT APR 2018 | BS EN ISO 3015 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF CLOUD POINT |
| DIN EN 16640:2015-09 (Draft) | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS 2000-4(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-4: DETERMINATION OF ASH |
| BS 2000-439(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCT - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD |
| BS 2000-131(1998) : 1998 | PETROLEUM PRODUCTS - GUM CONTENT OF LIGHT AND MIDDLE DISTILLATE FUELS - JET EVAPORATION METHOD |
| BS 2000-270(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF LEAD CONTENT OF GASOLINE - IODINE MONOCHLORIDE METHOD |
| PD ISO/TS 17307:2016 | Petroleum products. Biodiesel. Determination of total esters content by gas chromatography |
| 17/30359115 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| BS 2000-605(2013) : 2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| PREN 590 : DRAFT 2011 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| BIS IS 1448-9 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 9: DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| DIN EN 16144:2012-05 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| DIN EN 590:2017-10 | Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017) |
| IP 498 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| I.S. EN 16761-2:2015 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| I.S. CWA 15145:2005 | AUTOMOTIVE FUELS - WATER IN DIESEL FUEL EMULSIONS FOR USE IN INTERNAL COMBUSTION ENGINES - REQUIREMENTS AND TEST METHODS |
| S.R. CEN/TR 16514:2013 | AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL |
| I.S. EN ISO 3924:2016 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD |
| UNE-EN 16734:2017 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
| I.S. EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 22854:2016 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN AUTOMOTIVE-MOTOR GASOLINE AND IN ETHANOL (E85) AUTOMOTIVE FUEL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD (ISO 22854:2016) |
| EN ISO 5165:2018 | Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2017) |
| ISO/TS 17307:2016 | Petroleum products — Biodiesel — Determination of total esters content by gas chromatography |
| UNI CEN/TR 15367-3 : 2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
| I.S. EN 16997:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| BS 2000-79(2009) : 2009 COR 2010 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS 2000-428(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-428: LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY |
| BS 2000-13(1994) : 1994 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - CONRADSON METHOD |
| BS 2000-74(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS - DETERMINATION OF WATER - DISTILLATION METHOD |
| I.S. EN ISO 16591:2010 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - OXIDATIVE MICROCOULOMETRY METHOD |
| I.S. EN 15940:2016 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| BS 2000-447(2007) : 2007 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| UNE-EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| PREN 15293 : DRAFT 2016 | AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| PREN 14078 : DRAFT 2013 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| I.S. EN ISO 5165:1998 | PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD (ISO 5165:2017) |
| EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| DIN EN 12916:2016-06 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| IP 454 : 2015 | DETERMINATION OF PHOSPHORUS IN GASOLINE - SPECTROPHOTOMETRIC METHOD |
| EI HM 1 : 1999 | CALCULATION OF OIL QUANTITIES |
| UNI EN 16143 : 2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| PREN 17178 : DRAFT 2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE |
| ONORM EN ISO 20884 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| EN 15199-4:2015 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| UNI EN 14214 : 2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
| ISO 5165:2017 | Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
| ONORM EN ISO 20846 : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD (ISO 20846:2011) |
| NF EN ISO 20846 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD |
| ISO 15597:2001 | Petroleum and related products — Determination of chlorine and bromine content — Wavelength-dispersive X-ray fluorescence spectrometry |
| I.S. EN 14538:2006 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| DIN EN ISO 3679:2015-06 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| DIN EN ISO 20884:2011-07 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| BS EN ISO 3680:2004 | Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method |
| ISO 4260:1987 | Petroleum products and hydrocarbons Determination of sulfur content Wickbold combustion method |
| UNE-EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| BS EN 12634:1998 | Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method |
| CEN/TR 15367-1:2014 | Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels |
| UNE-EN 16640:2017 | Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method. (Consolidated version) |
| BS EN ISO 5163:2014 | Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method |
| BS EN ISO 6245:2002 | Methods of test for petroleum and its products. BS 2000-4: Determination of ash |
| UNE-EN ISO 5163:2014 | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014) |
| BS EN ISO 8754:2003 | Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence spectrometry |
| UNE-EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| UNE-EN 15944:2011 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| UNE-EN ISO 6246:2017 | Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017) |
| DIN EN 228:2017-08 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| EEMUA 138 : 2010 | DESIGN AND INSTALLATION OF ON-LINE ANALYSER SYSTEMS |
| EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| ONORM EN 116 : 2015 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| EN ISO 14596:2007 | Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:2007) |
| EN 16576:2014 | Automotive fuels - Determination of manganese and iron content in diesel - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| EN ISO 5164:2014 | Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014) |
| EN ISO 8754:2003 | Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003) |
| EN ISO 9029:1995 | Crude petroleum - Determination of water - Distillation method (ISO 9029:1990) |
| UNI EN 15938 : 2010 | AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| UNI EN 15195 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| UNI EN 14078 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| UNI EN ISO 5163 : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD |
| BS 7800:2006 | Automotive fuel. High octane (super) unleaded petrol. Specification |
| UNI EN 15944 : 2011 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES) |
| UNI EN 12662 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| EN 16934:2017 | Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE |
| UNI EN ISO 5164 : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
| DIN EN 16896:2015-09 (Draft) | PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER |
| UNE-EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
| S.R. CEN TS 15293:2011 | AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| API MPM CH17.9 : 2012+ADD 1 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17 - MARINE MEASUREMENT - SECTION 9 - VESSEL EXPERIENCE FACTOR (VEF) |
| BIS IS 1448-69 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 69: DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
| PD CEN/TR 15367-2:2007 | Petroleum products. Guide for good housekeeping Automotive petrol fuels |
| DIN EN ISO 16591:2011-04 | Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010) |
| DIN EN 16091:2012-02 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| I.S. CEN TR 15367-3:2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
| DIN EN 16135:2012-02 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS 2000-409(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE PRESSURE (AVP) BETWEEN 40 DEGREES C AND 100 DEGREES C |
| BS 2000-612(2013) : 2013 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| BS 2000-236(2005) : 2005 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD |
| PD CEN/TR 16514:2013 | Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol |
| 15/30330667 DC : 0 | BS EN 16934 - AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTER (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| ONORM EN ISO 3405 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| IP 434 : 98(R2004) | FREEZING POINT OF AVIATION TURBINE FUELS - AUTOMATED OPTICAL METHOD |
| DIN EN 16143:2013-05 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| DIN EN 13016-1:2007-11 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT |
| BS EN ISO 13032:2012 | Petroleum products. Determination of low concentration of sulfur in automotive fuels. Energy-dispersive X-ray fluorescence spectrometric method |
| UNI EN 16476 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| UNI EN ISO 16591 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - OXIDATIVE MICROCOULOMETRY METHOD |
| DIN EN 16761-2:2016-02 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| 14/30297823 DC : 0 | BS EN 15199-4 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL |
| IEC TR 61831:2011 | On-line analyser systems - Guide to design and installation |
| I.S. EN 15195:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| 14/30304453 DC : 0 | BS EN 12916 - PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| PD CEN/TR 15367-1:2014 | Petroleum products. Guidelines for good housekeeping Automotive diesel fuels |
| DIN ISO 8691:2010-09 | Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing (ISO 8691:1994) |
| I.S. EN 13016-2:2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE PRESSURE (AVP) BETWEEN 40 DEGREES C AND 100 DEGREES C |
| DIN 55680:1983-08 | PAINTS, VARNISHES AND RELATED PRODUCTS; FLASH/NO FLASH TEST; RAPID EQUILIBRIUM METHOD; ISO 3680 MODIFIED |
| 04/30113923 DC : DRAFT MAY 2004 | EN 12916 - PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| BS ISO 13739:2010 | Petroleum products. Procedures for transfer of bunkers to vessels CD-ROM |
| ISO 9403:2000 | Crude petroleum Transfer accountability Guidelines for cargo inspection |
| CEN/TR 16557:2013 | Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination |
| 10/30205520 DC : 0 | BS EN 16144 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD |
| PREN 228 : DRAFT 2009 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| BIS IS 1448-135 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 135: CRUDE PETROLEUM - DETERMINATION OF WATER - DISTILLATION METHOD |
| BS EN 16896:2016 | Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter |
| ISO/TR 19686-1:2014 | Petroleum products Equivalency of test method determining the same property Part 1: Atmospheric distillation of petroleum products |
| I.S. EN 15779:2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| 16/30325304 DC : 0 | BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
| 09/30205358 DC : 0 | BS EN ISO 20884 - PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| 12/30261559 DC : 0 | BS ISO 5164 - PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
| BS 2000-160(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-160: CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS - LABORATORY DETERMINATION OF DENSITY - HYDROMETER METHOD |
| BS 2000-34(2002) : 2002 AMD 15248 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| BS EN 15779 : 2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS 2000-620(2014) : 2014 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| DIN EN 16476:2014-07 | Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| PREN 14214 : DRAFT 2009 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| 09/30200031 DC : 0 | BS EN 15938 - AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
| 14/30310326 DC : 0 | BS EN 15940 - AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| BS ISO 10307-1:2009 | Petroleum products. Total sediment in residual fuel oils Determination by hot filtration |
| PD ISO/TS 17306:2016 | Petroleum products. Biodiesel. Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography |
| BS EN 16785-1:2015 | Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| PREN 116 : DRAFT 2009 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT |
| BS EN 16568:2014 | Automotive fuels. Blends of Fatty acid methyl ester (FAME) with diesel fuel. Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
| 16/30323964 DC : 0 | BS EN ISO 5165 - PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| 17/30359794 DC : 0 | BS EN ISO 3924 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD |
| 13/30285144 DC : 0 | BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| UNE-EN 16785-1:2016 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| 15/30326182 DC : 0 | BS EN 16906 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| 15/30326869 DC : 0 | BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS 4385:1980 | Method for determination of water in petroleum products and bituminous materials (distillation method) |
| UNE-EN 16091:2012 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| EI HM 68 : 2011 | PROCEDURES FOR BULK LIQUID FATTY ACID METHYL ESTERS (FAME) AND BLENDED BIODIESEL CARGO INSPECTIONS |
| BS ISO 15597:2001 | Methods of test for petroleum and its products. Determination of chlorine and bromine content. Wavelength-dispersive X-ray fluorescence spectrometry |
| BS 2000-358(1997) : 1997 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - DISTILLATION METHOD |
| 07/30166903 DC : DRAFT AUG 2007 | BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF CONTAMINATION IN MIDDLE DISTILLATES |
| ISO 3987:2010 | Petroleum products — Determination of sulfated ash in lubricating oils and additives |
| BS 2000-237(2005) : 2005 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
| BS 2000-170(2013) : 2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
| S.R. CEN/TR 16557:2013 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL BLENDS (B11 - B30) - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION |
| BS 2000-36(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
| UNI CEN/TS 16640 : 2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| IP 336 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| UNE-EN 16761-1:2016 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique |
| UNE-EN 16270:2015 | Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method |
| DIN ISO 1516:1987-06 | PAINTS, VARNISHES, PETROLEUM AND RELATED PRODUCTS - FLASH/NO FLASH TEST - CLOSED CUP EQUILIBRIUM METHOD |
| BS 2000-123(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| DIN EN 16568:2015-03 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| BS 2000-413(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - LOW LEVELS OF VANADIUM IN LIQUID FUELS - DETERMINATION BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY AFTER ASHING |
| BS EN ISO 3924:2016 | Petroleum products. Determination of boiling range distribution. Gas chromatography method |
| I.S. EN ISO 2592:2017 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017) |
| API MPM CH8.2 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.2: STANDARD PRACTICE FOR AUTOMATIC SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS |
| UNI EN 15199-3 : 2008 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| BS 2000-156(1997) : 1997 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
| I.S. EN 16906:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| BS 2000-498(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| BS 2000-386(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - COULOMETRIC KARL FISCHER TITRATION METHOD |
| I.S. EN 16576:2014 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| I.S. EN ISO 13032:2012 | PETROLEUM PRODUCTS - DETERMINATION OF LOW CONCENTRATION OF SULFUR IN AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD (ISO 13032:2012) |
| ISO 17308:2015 | Petroleum products and other liquids — Ethanol — Determination of electrical conductivity |
| EI/JIG 1530 : 2019 | Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4) |
| ISO 3924:2016 | Petroleum products Determination of boiling range distribution Gas chromatography method |
| EN ISO 22854:2016 | Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method (ISO 22854:2016) |
| EN 590:2013 | Automotive fuels - Diesel - Requirements and test methods |
| BS EN 590 : 2013 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 3405 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| PREN 1601 : DRAFT 2016 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| ONORM EN ISO 9038 : 2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013) |
| API MPM CH17.9 SPANISH : 2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17 - MARINE MEASUREMENT - SECTION 9 - VESSEL EXPERIENCE FACTOR (VEF) |
| I.S. EN 15938:2010 | AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| I.S. EN 16329:2013 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| BS EN 13016-1:2007 | Liquid petroleum products. Vapour pressure Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) |
| BS 2000-394(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) |
| 17/30361216 DC : 0 | BS EN 14110 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT |
| CEN/TR 15367-2:2007 | Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels |
| 16/30336428 DC : 0 | BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 3405:2011 | Petroleum products. Determination of distillation characteristics at atmospheric pressure |
| BS 2000-41(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| ONORM EN ISO 13736 : 2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
| I.S. EN ISO 12156-1:2016 | DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016) |
| DIN EN ISO 6246:2016-04 (Draft) | PETROLEUM PRODUCTS - GUM CONTENT OF FUELS - JET EVAPORATION METHOD (ISO 6246:2017) |
| ISO 10307-1:2009 | Petroleum products — Total sediment in residual fuel oils — Part 1: Determination by hot filtration |
| I.S. EN 15944:2010 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES) |
| I.S. EN 15794:2009 | DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| DIN EN ISO 14596:2007-12 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| DIN EN ISO 13736:2013-08 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| DIN EN ISO 3170:2004-06 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| ISO 20847:2004 | Petroleum products — Determination of sulfur content of automotive fuels — Energy-dispersive X-ray fluorescence spectrometry |
| BS EN 15553:2007 | Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method |
| BS EN ISO 12185:1996 | Methods of test for petroleum and its products. Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method |
| BS EN 14213:2003 | Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods |
| BS EN ISO 13736:2008 | Determination of flash point. Abel closed-cup method |
| BS EN ISO 3675:1998 | Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method |
| BS EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| ISO 22854:2016 | Liquid petroleum products Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel Multidimensional gas chromatography method |
| BS EN ISO 12205:1996 | Methods of test for petroleum and its products. Petroleum products. Determination of the oxidation stability of middle-distillate fuels |
| ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
| ISO 9029:1990 | Crude petroleum — Determination of water — Distillation method |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 20884:2011 | Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry |
| BS EN ISO 20884:2011 | Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry |
| BS EN ISO 2719:2002 | Determination of flash point. Pensky-Martens closed cup method |
| BS EN ISO 3679:2015 | Determination of flash no-flash and flash point. Rapid equilibrium closed cup method |
| UNE-EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| ISO 16591:2010 | Petroleum products Determination of sulfur content Oxidative microcoulometry method |
| BS EN 15195:2014 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| UNE-EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
| ISO 13032:2012 | Petroleum products — Determination of low concentration of sulfur in automotive fuels — Energy-dispersive X-ray fluorescence spectrometric method |
| ISO 5163:2014 | Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| ISO 8754:2003 | Petroleum products — Determination of sulfur content — Energy-dispersive X-ray fluorescence spectrometry |
| BS EN 13016-2:2007 | Liquid petroleum products. Vapour pressure Determination of absolute vapour pressure (AVP) between 40°C and 100°C |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| UNE-EN ISO 5164:2014 | Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014) |
| BS EN ISO 14597:1999 | Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry |
| ISO 14596:2007 | Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry |
| BS EN ISO 20846:2011 | Petroleum products. Determination of sulfur content of automotive fuels. Ultraviolet fluorescence method |
| ISO 9038:2013 | Determination of sustained combustibility of liquids |
| ISO 1516:2002 | Determination of flash/no flash — Closed cup equilibrium method |
| ISO 3680:2004 | Determination of flash/no flash Rapid equilibrium closed cup method |
| ISO 3830:1993 | Petroleum products Determination of lead content of gasoline Iodine monochloride method |
| UNE-EN ISO 16591:2011 | Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010) |
| BS EN 14112:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of oxidation stability (accelerated oxidation test) |
| BS EN ISO 3735:1999 | Crude petroleum and fuel oils. Determination of sediment. Extraction method |
| BS EN ISO 2160:1998 | Petroleum products. Corrosiveness to copper. Copper strip test |
| ISO 13736:2013 | Determination of flash point Abel closed-cup method |
| UNE-EN 15938:2011 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| ISO 14597:1997 | Petroleum products — Determination of vanadium and nickel content — Wavelength-dispersive X-ray fluorescence spectrometry |
| DIN EN 15553:2007-07 | Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
| UNE-EN ISO 2719:2017 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| BS EN 15199-1:2006 | Petroleum products. Determination of boiling range distribution by gas chromatography method Middle distillates and lubricating base oils |
| UNE-EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| ISO 12205:1995 | Petroleum products — Determination of the oxidation stability of middle-distillate fuels |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| DIN EN 15195:2015-02 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| DIN ISO 5275:2005-10 | Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species - Doctor test (ISO 5275:2003) |
| EN 16294:2012 | Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| EN ISO 1516:2002 | Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002) |
| EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| EN ISO 3830:1995 | Petroleum products - Determination of lead content of gasoline - Iodine monochloride method (ISO 3830:1993) |
| EN 1601:2017 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| EN ISO 3735:1999 | Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999) |
| EN 16997:2017 | Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method |
| EN 16785-1:2015 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| EN 16270:2015 | Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method |
| EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
| EN 15779:2009+A1:2013 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography |
| EN 13723:2002 | Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF) |
| EN 14517:2004 | Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| EN ISO 12205:1996 | Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995) |
| EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| EN 14538:2006 | Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| EN ISO 12185:1996 | Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
| EN 237:2004 | Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
| EN 15195:2014 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| EN 16761-1:2015 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique |
| EN 14331:2004 | Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method |
| EN ISO 16591:2010 | Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010) |
| EN ISO 3924:2016 | Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2016) |
| EN 15938:2010 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| EN 16568:2014 | Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
| EN 16136:2015 | Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| EN ISO 20847:2004 | Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004) |
| EN 16143:2013 | Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis |
| EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| EN ISO 20846:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) |
| EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| EN ISO 14597:1999 | Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997) |
| EI 1535 : 2016 | MINIMUM CRITERIA TO DETERMINE ACCEPTABILITY OF ADDITIVES FOR USE IN MULTI-PRODUCT PIPELINES CO-TRANSPORTING JET FUEL |
| EN 16091:2011 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| EN 15944:2010 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| EN ISO 6246:2017 | Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017) |
| EN ISO 13032:2012 | Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012) |
| EN 14077:2003 | Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method |
| EN ISO 3680:2004 | Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
| EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
| EN 16715:2015 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| EN 16761-2:2015 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique |
| EN 16135:2011 | Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS) |
| EN ISO 2160:1998 | Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
| EN ISO 12937:2000 | Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000) |
| EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
| EN 15794:2009 | Determination of explosion points of flammable liquids |
| EN ISO 5163:2014 | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014) |
| EN 16476:2014 | Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| EN 16906:2017 | Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method |
| ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
| DIN EN 16270:2015-08 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| 06/30138176 DC : 0 | EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
| 14/30299493 DC : 0 | BS EN 14112 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| DIN EN 16640 E : 2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS 2000-237(2014) : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014) |
| BS 2000-243(1994) : 1994 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND HYDROCARBONS - DETERMINATION OF SULFUR CONTENT - WICKBOLD COMBUSTION METHOD |
| 09/30206692 DC : 0 | BS EN 228 - AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| PREN 14110 : DRAFT 2017 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT |
| BS 2000-507(2006) : 2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS |
| I.S. EN 14517:2004 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| 12/30267087 DC : 0 | BS EN 16476 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOLD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
| ISO 3013:1997 | Petroleum products — Determination of the freezing point of aviation fuels |
| API TR 1149 : 2015 | PIPELINE VARIABLE UNCERTAINTIES AND THEIR EFFECTS ON LEAK DETECTABILITY |
| 14/30300902 DC : 0 | BS EN 16761-1 - AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| BS EN 16294:2012 | Petroleum products and fat and oil derivatives. Determination of phosphorus content in fatty acid methyl esters (FAME). Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| PREN 12916 : DRAFT 2014 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| BS EN 16476:2014 | Liquid petroleum products. Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel. Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| ISO 10336:1997 | Crude petroleum — Determination of water — Potentiometric Karl Fischer titration method |
| BS 2000-14(1994) : 1994 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - RAMSBOTTOM METHOD |
| DIN EN 16785-1:2016-03 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| UNE-EN 16294:2013 | Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| UNE-EN 15199-4:2015 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| I.S. EN 16568:2014 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| PD IEC/TR 61831:2011 | On-line analyser systems. Guide to design and installation |
| 08/30172824 DC : DRAFT JAN 2008 | BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| BS 2000-170(1995) : 1995 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
| PREN 14112 : DRAFT 2014 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| BS 2000-510(2004) : 2004 | PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD |
| BS 2000-429(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 429: LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY |
| I.S. EN 1601:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| BS 2000-309(1998) : 1998 | DIESEL AND DOMESTIC HEATING FUELS. DETERMINATION OF COLD FILTER PLUGGING POINT |
| IP 615 : 2016 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| ISO 9114:1997 | Crude petroleum Determination of water content by hydride reaction Field method |
| 15/30301955 DC : 0 | BS EN ISO 3924 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD |
| DIN EN 16329:2013-07 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| DIN EN 16476 E : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| UNE-EN ISO 22854:2016 | Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method (ISO 22854:2016) |
| UNE-EN 16715:2016 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| BS 2000-523(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-523: DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| PD ISO/TR 11583:2012 | Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits |
| PD CEN/TS 16640:2014 | Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method |
| 17/30340314 DC : 0 | BS EN ISO 3405 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| BS 2000-163(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - LUBRICATING OILS AND ADDITIVES - DETERMINATION OF SULFATED ASH |
| BS 2000-582(2010) : 2010 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD |
| 16/30329930 DC : 0 | BS EN ISO 6246 - PETROLEUM PRODUCTS - GUM CONTENT OF LIGHT AND MIDDLE DISTILLATE FUELS - JET EVAPORATION METHOD |
| UNI CEN/TS 15940 : 2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| DIN EN 15199-3:2008-09 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil |
| IP 41 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| DIN EN 16576:2015-02 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| I.S. EN ISO 3405:2011 | PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| 16/30327612 DC : 0 | BS EN 13016-3 - LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD) |
| BS EN 16906:2017 | Liquid petroleum products. Determination of the ignition quality of diesel fuels. BASF engine method |
| BS EN 16091:2011 | Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Determination of oxidation stability by rapid small scale oxidation method |
| DIN EN 16715:2015-10 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| BS ISO 4261:2013 | Petroleum products. Fuels (class F). Specifications of gas turbine fuels for industrial and marine applications |
| UNI EN 16135 : 2012 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN 16294 : 2013 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS 2000-408(2014) : 2014 COR 2014 | LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID) |
| I.S. EN 16270:2015 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| BS 2000-589(2011) : 2011 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS 2000-498(2014) : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| 09/30201423 DC : 0 | BS EN 15944 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| BIS IS 1448-8 : 2012 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 8: DETERMINATION OF CARBON RESIDUE - RAMSBOTTOM METHOD |
| ISO 6615:1993 | Petroleum products Determination of carbon residue Conradson method |
| I.S. EN 16476:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| OLF 085 : 2012 | RECOMMENDED GUIDELINES FOR SAMPLING AND ANALYSIS OF PRODUCED WATER |
| BS 2000-336(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-336: PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| DIN EN 15199-4:2015-12 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| BS 2000-143(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF ASPHALTENES (HEPTANE INSOLUBLES) IN CRUDE PETROLEUM AND PETROLEUM PRODUCTS |
| CEN/TR 15367-3:2009 | Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination |
| BS 2000-578(2009) : 2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| BS 2000-433(1998) : 1998 | METHOD OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVE-LENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| UNE-EN ISO 13032:2012 | Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012) |
| S.R. CEN/TR 15367-1:2014 | PETROLEUM PRODUCTS - GUIDELINES FOR GOOD HOUSEKEEPING - PART 1: AUTOMOTIVE DIESEL FUELS |
| UNE-EN 16761-2:2016 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique |
| I.S. EN 16135:2011 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS 2000-373(2010) : 2010 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - OXIDATIVE MICROCOULOMETRY METHOD |
| BS 2000-574(2009) : 2009 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| ISO 4261:2013 | Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications |
| I.S. EN 13016-1:2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) |
| BS 2000-274(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - AVIATION AND DISTILLATE FUELS - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| BS 2000-408(1997) : 1997 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUND AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID) |
| BS 2000-163(2010) : 2010 | PETROLEUM PRODUCTS - DETERMINATION OF SULFATED ASH IN LUBRICATING OILS AND ADDITIVES |
| BS 2000-342(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF THIOL (MERCAPTAN) SULFUR IN LIGHT AND MIDDLE DISTILLATE FUELS - POTENTIOMETRIC METHOD |
| I.S. EN 16294:2012 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| I.S. EN 16761-1:2015 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| IP PM CW : 2004 | DETERMINATION OF LOW LEVEL METALLIC ELEMENTS IN VACUUM GAS OIL/WAXY DISTILLATES AND CRUDE OILS - FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY (AAS) OR INDUCTIVELY COUPLED PLASMA-EMISSION SPECTROPHOTOMETRY (ICP-ES) METHOD |
| I.S. EN 590:2013+A1:2017&LC:2017 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| PREN 17155 : DRAFT 2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
| BS 2000-475(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-475: PETROLEUM LIQUIDS - MANUAL SAMPLING |
| ISO/TR 9038:1991 | Paints and varnishes Determination of the ability of liquid paints to sustain combustion |
| UNE-EN 16709:2016 | Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods |
| DIN EN 16709:2015-12 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| NF EN ISO 3405 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| UNE-EN 14214:2013 | Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods |
| 17/30360226 DC : 0 | BS EN 17155 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
| IP 227 : 1999 | DETERMINATION OF CORROSIVENESS TO SILVER OF AVIATION TURBINE FUELS - SILVER STRIP METHOD |
| DIN EN 16906:2015-09 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| DIN EN 16934:2015-12 (Draft) | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| EN 13016-3:2018 | Liquid petroleum products - Vapour pressure - Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method) |
| IP 578 : 2015 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| UNE-EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| ISO/TS 17306:2016 | Petroleum products — Biodiesel — Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography |
| I.S. EN 15751:2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| DIN EN ISO 3405:2011-04 | PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| I.S. CWA 15293:2005 | AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS |
| ISO 6297:1997 | Petroleum products — Aviation and distillate fuels — Determination of electrical conductivity |
| ISO/TR 11583:2012 | Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits |
| ISO 6246:2017 | Petroleum products — Gum content of fuels — Jet evaporation method |
| DIN EN 14078:2014-09 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| DIN EN ISO 20846:2012-01 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD (ISO 20846:2011) |
| BS EN ISO 1523:2002 | Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
| BS EN 24260:1994 | Methods of test for petroleum and its products. Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold combustion method |
| BS EN 237:2004 | Methods of test for petroleum and its products BS 2000-428: Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry |
| BS EN ISO 3170:2004 | Methods of test for petroleum and its products. BS 2000-475: Petroleum liquids. Manual sampling |
| UNE-EN 590:2014 | Automotive fuels - Diesel - Requirements and test methods |
| UNE-EN 14112:2017 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
| BS EN 14331:2004 | Liquid petroleum products. Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates. Liquid chromatography (LC)/gas chromatography (GC) method |
| BS EN 238:1996 | Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry |
| BS EN 116:2015 | Diesel and domestic heating fuels. Determination of cold filter plugging point. Stepwise cooling bath method |
| BS EN ISO 1516:2002 | Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method |
| BS EN ISO 3830:1996 | Petroleum products. Determination of lead content of gasoline. Iodine monochloride method |
| BS EN ISO 14596:2007 | Petroleum products. Determination of sulfur content. Wavelength-dispersive X-ray fluorescence spectrometry |
| BS EN 12177:2000 | Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petroleum. Determination of benzene content by gas chromatography |
| BS EN 12766-1:2000 | Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
| BS EN 1601:2017 | Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID) |
| BS EN 13723:2002 | Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF) |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ISO 20846:2011 | Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method |
| DIN EN 237:2004-12 | Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
| CEN/TS 15293:2011 | Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods |
| DIN EN ISO 6245:2003-01 | PETROLEUM PRODUCTS - DETERMINATION OF ASH |
| DIN EN 14214:2003-11 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| EN 15553:2007 | Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
| DIN EN 14517:2004-12 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-256: LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| DIN EN ISO 3680:2004-07 | DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| DIN EN 16896:2017-02 | Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter |
| CEN/TR 16514:2013 | Automotive fuels - Unleaded petrol containing more than 3,7 % (m/m) oxygen - Roadmap, test methods, and requirements for E10+ petrol |
| CEN/TS 15940:2012 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| DIN EN 14522:2005-12 | Determination of the auto ignition temperature of gases and vapours |
| DIN EN 15199-2:2007-01 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels |
| DIN EN 14078:2004-03 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| DIN EN 14538:2006-09 | Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| DIN EN ISO 5163:2014-10 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014) |
| I.S. EN ISO 12185:1997 | CRUDE PETROLEUM AND PETROLEUM PRODUCTS - DETERMINATION OF DENSITY - OSCILLATING U-TUBE METHOD |
| UNE-EN 228:2013 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| ISO 3534:1977 | Statistics — Vocabulary and symbols |
| ISO 3165:1976 | Sampling of chemical products for industrial use — Safety in sampling |
| ISO 5168:2005 | Measurement of fluid flow — Procedures for the evaluation of uncertainties |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 3735:1999 | Crude petroleum and fuel oils Determination of sediment Extraction method |
| ISO 3734:1997 | Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ISO/TR 9494:1997 | Petroleum liquids — Automatic pipeline sampling — Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.