ISO 3161:1999
Current
Current
The latest, up-to-date edition.
Aerospace — UNJ threads — General requirements and limit dimensions
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
02-12-1999
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This International Standard specifies the general requirements and limit dimensions of inch series UNJ threads with
controlled root radius for aerospace construction.
It determines the basic triangular profile for this type of thread and gives a system for designating the diameter and
number of threads per inch combinations. For all diameters 0,060 in (1,524 mm) to 6,000 in (152,4 mm), it offers in
the form of tables the basic dimensions and tolerances for a selection of diameter and number of threads per inch
combinations. It also provides the method of calculation for the dimensions and tolerances for any diameter and
number of threads per inch combination not given in the tables, including threads with a diameter in excess of
6,000 in.
| Committee |
ISO/TC 20/SC 4
|
| DevelopmentNote |
Also numbered as BS A346(2000) (06/2005)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE 28555:1985 | Identical |
| BS 4084:1996 | Identical |
| 09/30204363 DC : 0 | BS EN 6029 - AEROSPACE SERIES - ROD-ENDS, ADJUSTABLE, SINGLE FORK WITH UNJ THREADED SHANK MIN. ENGAGEMENT: 1,5 X THREAD DIAMETER IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| 08/30185236 DC : DRAFT JULY 2008 | BS EN 4673-006 - AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 006: IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS2 COATED |
| 05/30128217 DC : DRAFT JAN 2005 | ISO/DIS 23933 - AEROSPACE - ARAMID REINFORCED LIGHTWEIGHT POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES, CLASSIFICATION 135 DEGREE C/20 684 KPA (275 DEGREE F/3 000 PSI) AND 135 DEGREE C/21 000 KPA (275 DEGREE F/3 046 PSI) - PROCUREMENT SPECIFICATION |
| 09/30204326 DC : 0 | BS EN 4351 - AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| 11/30250205 DC : 0 | BS EN 6138 - AEROSPACE SERIES - CAP, PROTECTIVE, NON METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |
| BS EN 4156:2013 | Aerospace series. Rod ends, with self-aligning double row ball bearings and threaded shank in steel. Inner ring and balls in corrosion resisting steel. Dimensions and loads. Inch series |
| 08/30185179 DC : DRAFT JULY 2008 | BS EN 4673-001 - AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 001: INSTALLATION AND REMOVAL PROCEDURE |
| BS ISO 16130:2015 | Aerospace series. Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test) |
| 17/30369678 DC : 0 | PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS |
| UNI EN 4673-003 : 2010 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF- BROACHING KEYS - PART 003: TECHNICAL SPECIFICATION |
| 14/30310864 DC : 0 | BS EN 4834 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) PORT FOR RING LOCKED FITTING - INCH SERIES - GEOMETRIC CONFIGURATION |
| BS ISO 7169:2014 | Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa. Procurement specification, inch/metric |
| I.S. EN 4673-004:2010 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 004: IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATING |
| BS EN 4673-006:2010 | Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys In heat resisting steel FE-PA2601 (A286), MoS2 coated |
| BS ISO 8913:2006 | Aerospace. Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400°F/3000 psi (204°C/20684 kPa) and 204°C/21000 kPa (400°F/3046 psi). Procurement specification |
| NF EN 4673-004 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 004: IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATING |
| 04/30112507 DC : DRAFT APR 2004 | ISO 7169 - AEROSPACE - SEPARABLE TUBE FITTINGS FOR FLUID SYSTEMS, FOR 24 CONES, FOR PRESSURES UP TO 3000 PSI OR 21 KPA - PROCUREMENT SPECIFICATION INCH/METRIC |
| 00/715934 DC : DRAFT OCT 2000 | ISO/CD 8913 - AEROSPACE - LIGHTWEIGHT POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES, CLASSIFICATION 204 DEGREE C/20 684 KPA (400 DEGREE F/ 3000 PSI), 204 DEGREE C/21 000 KPA (400 DEGREE F/ 3046 PSI) - PROCUREMENT SPECIFICATION |
| PREN 4446 : 200P1 | AEROSPACE SERIES - NUTS, ELLIPTICAL CLINCH, SELF-LOCKING - INSTALLATION ADN REMOVAL PROCEDURE |
| SAE AS 1338 : 2014 | AEROSPACE METRIC 60 DEGREES SCREW THREAD PROFILE AND TOLERANCE CLASSES |
| PREN 4553 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, SPHERICAL, IN HEAT RESISTING STEEL - ELBOW 90 DEGREES NIPPLES, WELDED - INCH SERIES |
| PREN 6123 : 200P2 | AEROSPACE SERIES - FITTING END, 24 DEGREES INTERNAL CONE, EXTERNAL THREAD, FLARELESS TYPE - EXTRA FINE THREAD PITCH - INCH SERIES - DESIGN STANDARD |
| PREN 4557 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, SPHERICAL, IN HEAT RESISTING STEEL - TEES NIPPLES, WELDED - INCH SERIES |
| PREN 4832 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| PREN 4673-004 : 200P1 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 004: IN HEAT RESISTING NICKEL BASE ALLOY - NI-P100HT (INCONEL 718), SILVER PLATING |
| PREN 4444 : 200P1 | AEROSPACE SERIES - NUTS, ELLIPTICAL CLINCH, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C - TECHNICAL SPECIFICATION |
| PREN 4673-006 : 200P1 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 006: IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED |
| PREN 3646-004 : 200P3 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 004: RECEPTACLE, JAM-NUT MOUNTING - PRODUCT STANDARD |
| PREN 4835 : DRAFT 2017 | AEROSPACE SERIES - INSTALLATION AND REMOVAL REQUIREMENTS FOR RING LOCKED FITTING AND REDUCER, 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) - INCH SERIES |
| PREN 6057 : 200P1 | AEROSPACE SERIES - ROD-ENDS, WITH BEARING PER EN4265 IN CORROSION RESISTING STEEL, INTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6126 : 200P1 | AEROSPACE SERIES - FITTING END, 24 DEGREES INTERNAL CONE, EXTERNAL THREAD, FLARELESS TYPE, SIZE -32 TUBE DIAMETER D = 2 INCHES (D = 50,8 MM) - EXTRA FINE THREAD PITCH - INCH SERIES - DESIGN STANDARD |
| PREN 4550-3 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES - DESIGN CONFIGURATION - INCH SERIES - PART 3: PORT CONNECTIONS |
| PREN 4445 : 200P1 | AEROSPACE SERIES - NUTS, ELLIPTICAL CLINCH, SELF-LOCKING - DESIGN STANDARD |
| I.S. EN 6029:2017 | AEROSPACE SERIES - ROD-ENDS, ADJUSTABLE, SINGLE FORK WITH UNJ THREADED SHANK MIN. ENGAGEMENT: 1,5 X THREAD DIAMETER IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| SAE AS 18280 : 2017 | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
| I.S. EN 4673-005:2010 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 005: IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATING |
| NF EN 4673-003 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 003: TECHNICAL SPECIFICATION |
| DIN EN 6024:1996-03 (Draft) | lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; inch series |
| 12/30237808 DC : DRAFT JUNE 2012 | BS ISO 19631 - AEROSPACE - TUBE FITTINGS FOR FLUID SYSTEMS, 5000 PSI (35000 KPA) - QUALIFICATION SPECIFICATION |
| BS EN 6138:2017 | Aerospace series. Cap, protective, non-metallic for fitting ends ≤ 3 000 PSI hydraulic systems |
| 08/30185184 DC : DRAFT JULY 2008 | BS EN 4673-002 - AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 002: DESIGN STANDARD |
| ISO 13415:1997 | Aerospace — Airframe needle track roller, stud type, single-row, sealed — Inch series |
| BS ISO 19631:2015 | Aerospace series. Tube fittings for fluid systems, 5 080 psi (35 000 kPa). Qualification specification |
| UNI EN 4673-005 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF- BROACHING KEYS - PART 005: IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATING |
| BS ISO 19632:2015 | Aerospace series. Fitting end, 24° internal cone, external thread, flareless type extra fine thread pitch inch series. Design standard |
| 04/30115599 DC : DRAFT JUN 2004 | ISO 8913 - AEROSPACE SERIES - LIGHTWEIGHT POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES, CLASSIFICATION 400 DEGREE F/3000 PSI, 204 DEGREE C/21000 KPA |
| 11/30254519 DC : 0 | BS EN 4550-1 - AEROSPACE SERIES - PIPE COUPLING, 37 DEGREE - DESIGN CONFIGURATION - INCH SERIES - PART 1: MALE SEALING ENDS, SPHERICAL |
| ONORM EN 3646-006 : 2006 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 006: RECEPTACLE, HERMETIC, JAM-NUT MOUNTING - PRODUCT STANDARD |
| PREN 4447 : 200P1 | AEROSPACE SERIES - NUTS, ELLIPTICAL CLINCH, SELF-LOCKING, UNJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4554 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, SPHERICAL, IN HEAT RESISTING STEEL - STRAIGHT UNIONS, THREADED - INCH SERIES |
| PREN 4673-003 : 200P1 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 003: TECHNICAL SPECIFICATION |
| PREN 4551 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, IN HEAT RESISTING STEEL - SWIVEL NUTS - INCH SERIES |
| STANAG 7106 : 2015 | CHARACTERISTICS OF GASEOUS BREATHING OXYGEN, LIQUID BREATHING OXYGEN AND SUPPLY PRESSURES, HOSES AND REPLENISHMENT COUPLINGS |
| I.S. EN 4673-001:2010 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 001: INSTALLATION AND REMOVAL PROCEDURE |
| ISO 8913:2006 | Aerospace Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 degrees F/3 000 psi (204 degrees C/20 684 kPa) and 204 degrees C/21 000 kPa (400 degrees F/3 046 psi) Procurement specification |
| UNI EN 4673-006 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 006: IN HEAT RESISTING STEEL FE-PA2601(A286), MOS[2] COATED |
| NF EN 4673-006 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 006: IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED |
| BS EN 4554:2003 | Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Straight unions, threaded. Inch series |
| BS EN 4550-2:2003 | Aerospace series. Pipe coupling 37°. Design configuration. Inch series Port ends |
| I.S. EN 3646-004:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 004: RECEPTACLE, JAM-NUT MOUNTING - PRODUCT STANDARD |
| I.S. EN 4551:2014&LC:2014-12 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, IN HEAT RESISTING STEEL - SWIVEL NUTS - INCH SERIES |
| I.S. EN 4552:2015 | AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, SPHERICAL, IN HEAT RESISTING STEEL - STRAIGHT NIPPLES, WELDED END - INCH SERIES |
| I.S. EN 4550-1:2014 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES - DESIGN CONFIGURATION - INCH SERIES - PART 1: MALE SEALING ENDS, SPHERICAL |
| SAEITC TS220-1 | TS220 Technical Specification for Self Locking Union Nuts (Unified Threads) Manufactured from INCO718 Material.1270 MPa (185000 lbf/in2) Minimum Tensile Strength at Room Temperature |
| SBAC TS 128 : 6 | 'ALL-METAL' SELF-LOCKING NUTS (UNJ THREADS) 1100 MPA (160,000 LBF/IN[2]) MINIMUM TENSILE STRENGTH AT ROOM TEMPERATURE |
| SBAC TS 24 : 6 | MANUFACTURING SPECIFICATION FOR BOLTS, 1275 MPA (185,000 LBF/IN[2]) - TENSILE AT ROOM TEMPERATURE, 1000 MPA (145,000 LBF/IN[2]) TENSILE AT 650 DEGREE C |
| SAEITC TS 22 ISSUE 10 : 2008 | MANUFACTURING SPECIFICATION FOR BOLTS, 1100 MPA (159,000 LBF/IN[2]) - ULTIMATE TENSILE STRENGTH - MINIMUM AT ROOM TEMPERATURE |
| SAEITC TS66-6 | TS66 Draughting and Part Numbering Procedures for Drawings |
| SBAC TS 145 : 4 | TECHNICAL SPECIFICATION NO. TS145 - MANUFACTURING SPECIFICATION FOR BOLTS (UNIFIED THREADS) HEAT RESISTING ALLOY STEEL FV535, CLASSIFICATION RM >= 1000 MPA (145,000 LBF/IN[2]) @ TA/+550 DEGREES C |
| 14/30310866 DC : 0 | BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES |
| 13/30292604 DC : 0 | BS EN 3646-004 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 004: RECEPTACLE, JAM-NUT MOUNTING - PRODUCT STANDARD |
| UNI EN 4673-002 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF- BROACHING KEYS - PART 002: DESIGN STANDARD |
| 15/30329889 DC : 0 | BS A 266 TO 271 - BOLT, 100 DEGREES COUNTERSUNK HEAD, HI-TORQUE SPEED DRIVE RECESS, UNJF THREAD, SPLIT PIN HOLE OPTION, TITANIUM ALLOY, VARIOUS FINISHES, CLASSIFICATION: 80 TF/IN[2] (1100 MPA) AT TA/+315 DEGREES C |
| ISO 16130:2015 | Aerospace series Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test) |
| BS ISO 23933:2006 | Aerospace series. Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135°C/20 684 kPa (275°F/3 000 psi) and 135°C/21 000 kPa (275°F/3 046 psi). Procurement specification |
| 12/30260907 DC : 0 | BS EN 4712 - AEROSPACE SERIES - NUTS, 12-POINT FLANGE, SELF-LOCKING, CONTINUOUS FIBRE REINFORCED-PEEK COMPOSITE, TEMPERATURE RANGE -65 DEGREES C TO 135 DEGREES C - INCH SERIES |
| UNI EN 4673-004 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF- BROACHING KEYS - PART 004: IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATING |
| 16/30338746 DC : DRAFT APR 2016 | BS ISO 15872 - AEROSPACE - UNJ THREADS - GAUGING |
| 07/30165543 DC : DRAFT MAY 2007 | BS 4A 100 AMD1 - SPECIFICATION FOR GENERAL REQUIREMENTS FOR BOLTS AND FREE RUNNING NUTS OF TENSILE STRENGTH NOT EXCEEDING 1249 MPA |
| ISO 23933:2006 | Aerospace Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees C/21 000 kPa (275 degrees F/3 046 psi) Procurement specification |
| BS 4A 100:2003 | Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
| 10/30239068 DC : 0 | BS EN 3646-004 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREE C OR 200 DEGREE C CONTINUOUS - PART 004: RECEPTACLE, JAM-NUT MOUNTING - PRODUCT STANDARD |
| 10/30239069 DC : 0 | BS EN 3646-006 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREE C OR 200 DEGREE C CONTINUOUS - PART 006: RECEPTACLE, HERMETIC, JAM-NUT MOUNTING - PRODUCT STANDARD |
| 14/30310862 DC : 0 | BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| PREN 4156 : 200P2 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS INCH SERIES |
| DIN ISO 8775:1988-06 | AEROSPACE - GASEOUS OXYGEN REPLENISHMENT CONNECTION FOR USE IN FLUID SYSTEMS (NEW TYPE) - DIMENSIONS (INCH SERIES) |
| BS 2A 266 to 2A 271:2016+A1:2019 | Aerospace Series. Bolt, 100° Countersunk head, Hi-Torque speed drive recess, close tolerance shank, UNJF thread, split pin hole option, titanium alloy, various finishes. Classification: R<sub>m</sub> 1100–1250 MPa (160 000–180 000 lbf/in<sup>2</sup>) at Ambient Temperature | +315 °C |
| BS EN 3646-006:2006 | Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous Receptacle, hermetic jam-nut mounting. Product standard |
| I.S. EN 4673-006:2010 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 006: IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED |
| I.S. EN 4673-003:2010 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 003: TECHNICAL SPECIFICATION |
| BS EN 4552:2015 | Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Straight nipples, welded end. Inch series |
| UNI EN 4156 : 2014 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| EN 4673-002:2010 | Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 002: Design standard |
| 12/30237811 DC : DRAFT JUNE 2012 | BS ISO 19632 - AEROSPACE SERIES - FITTING END, 24 DEGREES INTERNAL CONE, EXTERNAL THREAD, FLARE LESS TYPE EXTRA FINE THREAD PITCH INCH SERIES - DESIGN STANDARD |
| 14/30310865 DC : 0 | BS EN 4835 - AEROSPACE SERIES - INSTALLATION AND REMOVAL REQUIREMENTS FOR RING LOCKED FITTING AND REDUCER, 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) - INCH SERIES |
| 13/30292606 DC : 0 | BS EN 3646-006 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 006: RECEPTACLE, HERMETIC, JAM-NUT MOUNTING - PRODUCT STANDARD |
| 11/30247209 DC : 0 | BS EN 3087 - AEROSPACE SERIES - CLAMPBLOCK - TECHNICAL SPECIFICATION |
| I.S. EN 6123:2016 | AEROSPACE SERIES - FITTING END, 24 DEGREES INTERNAL CONE, EXTERNAL THREAD, FLARELESS TYPE - EXTRA FINE THREAD PITCH - INCH SERIES - DESIGN STANDARD |
| BS EN 4673-002:2010 | Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys Design standard |
| BS EN 4673-005:2010 | Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys In heat resisting nickel base alloy NI-P101HT (WASPALOY), silver plating |
| UNI EN 4673-001 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF- BROACHING KEYS - PART 001: INSTALLATION AND REMOVAL PROCEDURE |
| 12/30260906 DC : 0 | BS EN 4711 - AEROSPACE SERIES - SCREW, 12-POINT FLANGE HEAD (BI HEXAGONAL HEAD BOLT), LONG THREAD, FOR TENSILE APPLICATIONS, CONTINUOUS FIBRE REINFORCED-PEEK COMPOSITE, TEMPERATURE RANGE -65 DEGREES C TO 135 DEGREES C - INCH SERIES |
| BS EN 6123:2016 | Aerospace series. Fitting end, 24° internal cone, external thread, flareless type. Extra fine thread pitch. Inch series. Design standard |
| BS ISO 15872:2017 | Aerospace. UNJ threads. Gauging |
| SAE AS 4959 : 2018 | BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 140 KSI 1650 DEGREES F SOLUTION HEAT TREATMENT AGED BEFORE FILLET AND THREAD ROLLING PROCUREMENT SPECIFICATION |
| PREN 6138 : DRAFT 2014 CORR 14 | AEROSPACE SERIES - CAPS, PROTECTIVE, NON-METALLIC FOR FLARED AND FLARELESS FITTING ENDS, FOR FLUID SYSTEMS WITH <= 3000 PSI (21000 KPA) WORKING PRESSURE |
| STANAG 3296 : 0 | AIRCRAFT GASEOUS OXYGEN REPLENISHMENT COUPLINGS |
| ASD-STAN prEN 4157 P1:1996 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 4550-1 : 200P2 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES - DESIGN CONFIGURATION - INCH SERIES - PART 1: MALE SEALING ENDS, SPHERICAL |
| PREN 4673-001 : 200P1 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 001: INSTALLATION AND REMOVAL PROCEDURE |
| PREN 4550-2 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES - DESIGN CONFIGURATION - INCH SERIES - PART 2: PORT ENDS |
| BS 2A241(2005) : 2005 | GENERAL REQUIREMENTS FOR STEEL PROTRUDING-HEAD BOLTS OF TENSILE STRENGTH 1250 MPA (180000 LBF/IN[2]) OR GREATER - SPECIFICATION |
| I.S. EN 3646-006:2006 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREE C OR 200 DEGREE C CONTINUOUS - PART 006: RECEPTACLE, HERMETIC, JAM-NUT MOUNTING - PRODUCT STANDARD |
| SAE AIR 2000 : 2000 | AEROSPACE FLUID SYSTEM STANDARDS, METRIC, NATIONAL AND INTERNATIONAL |
| I.S. EN 4156:2013 | AEROSPACE SERIES - ROD ENDS, WITH SELFALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| I.S. EN 4673-002:2010 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 002: DESIGN STANDARD |
| ISO 7169:2014 | Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric |
| BS EN 4551:2014 | Aerospace series. Pipe coupling, 37°, in heat resisting steel. Swivel nuts. Inch series |
| BS EN 4550-1:2014 | Aerospace series. Pipe coupling, 37°. Design configuration. Inch series Male sealing ends, spherical |
| BS EN 4550-3:2003 | Aerospace series. Pipe coupling 37°. Design configuration. Inch series Port connections |
| BS EN 4557:2003 | Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Tees nipples, welded end. Inch series |
| BS EN 4553:2003 | Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Elbow 90° nipples, welded end. Inch series |
| EN 4552:2015 | Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Straight nipples, welded end - Inch series |
| EN 4673-006:2010 | Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 006: In heat resisting steel FE-PA2601 (A286), MoS2 coated |
| EN 4556:2003 | Aerospace series - Pipe coupling 37°, in heat resisting steel - Cap assemblies- Inch series |
| EN 4550-3:2003 | Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 3: Port connections |
| EN 4550-1:2014 | Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 1: Male sealing ends, spherical |
| EN 4156:2013 | Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in steel - Inner ring and balls in corrosion resisting steel - Dimensions and loads - Inch series |
| EN 4550-2:2003 | Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 2: Port ends |
| EN 3646-004:2015 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting - Product standard |
| EN 4673-004:2010 | Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 004: In heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plating |
| EN 6123:2016 | Aerospace series - Fitting end, 24° internal cone, external thread, flareless type - Extra fine thread pitch - Inch series - Design standard |
| EN 4673-001:2010 | Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 001: Installation and removal procedure |
| EN 4673-003:2010 | Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 003: Technical specification |
| EN 4554:2003 | Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Straight unions, threaded - Inch series |
| EN 6029:2017 | Aerospace series - Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel - Dimensions and loads - Inch series |
| EN 4553:2003 | Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Elbow 90° nipples, welded end - Inch series |
| EN 4673-005:2010 | Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 005: In heat resisting nickel base alloy NI-P101HT (WASPALOY), silver plating |
| EN 6138:2017 | Aerospace series - Cap, protective, non-metallic for fitting ends ≤ 3 000 PSI hydraulic systems |
| EN 4551:2014 | Aerospace series - Pipe coupling, 37°, in heat resisting steel - Swivel nuts - Inch series |
| EN 4557:2003 | Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Tees nipples, welded end - Inch series |
| AAGSP-02 : 2015 | CHARACTERISTICS OF GASEOUS BREATHING OXYGEN, LIQUID BREATHING OXYGEN AND SUPPLY PRESSURES, HOSES AND REPLENISHMENT COUPLINGS |
| 11/30254550 DC : 0 | BS EN 4552 - AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, SPHERICAL, IN HEAT RESISTING STEEL - STRAIGHT NIPPLES, WELDED END - INCH SERIES |
| BS EN 4673-004:2010 | Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys In heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plating |
| 12/30260908 DC : 0 | BS EN 4713 - AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, CONTINUOUS FIBRE REINFORCED PEEK COMPOSITE, TEMPERATURE RANGE -65 DEGREES C TO 135 DEGREES C - INCH SERIES |
| 11/30254548 DC : 0 | BS EN 4551 - AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, IN HEAT RESISTING STEEL - SWIVEL NUTS - INCH SERIES |
| BS EN 4673-001:2010 | Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys Installation and removal procedure |
| BS EN 4673-003:2010 | Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys Technical specification |
| NF EN 4673-001 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 001: INSTALLATION AND REMOVAL PROCEDURE |
| ISO 19631:2015 | Aerospace series Tube fittings for fluid systems, 5 080 psi (35 000 kPa) Qualification specification |
| 08/30185224 DC : DRAFT JULY 2008 | BS EN 4673-004 - AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 004: IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATING |
| DIN 202:1999-11 | SCREW THREADS - GENERAL PLAN |
| PREN 4833 : DRAFT 2017 | AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| 09/30204325 DC : 0 | BS EN 4156 - AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 3078 : 200P1 | AEROSPACE SERIES - P, Q AND SADDLE CLAMPS WITH RUBBER CUSHION - TECHNICAL SPECIFICATION |
| PREN 4836 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| PREN 4834 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) PORT FOR RING LOCKED FITTING - INCH SERIES - GEOMETRIC CONFIGURATION |
| NF EN 4673-005 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 005: IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATING |
| PREN 4673-005 : 200P1 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 005: IN HEAT RESISTING NICKEL BASE ALLOY - NI-P101HT (WASPALOY), SILVER PLATING |
| PREN 4351 : 200P1 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 4552 : 200P2 | AEROSPACE SERIES - PIPE COUPLINGS 37 DEGREES, SPHERICAL, IN HEAT RESISTING STEEL - STRAIGHT NIPPLES, WELDED END - INCH SERIES |
| TR 4815 : 2015 | AEROSPACE SERIES - FLANGE COUPLINGS, UP TO 21000 KPA - DESIGN STANDARD - INCH SERIES |
| PREN 4673-002 : 200P1 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 002: DESIGN STANDARD |
| PREN 3646-006 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 006: RECEPTACLE, HERMETIC, JAM-NUT MOUNTING - PRODUCT STANDARD |
| I.S. EN 6138:2017 | AEROSPACE SERIES - CAP, PROTECTIVE, NON-METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |
| NF EN 4673-002 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 002: DESIGN STANDARD |
| ISO 15872:2017 | Aerospace — UNJ threads — Gauging |
| EN 3646-006:2006 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Receptacle, hermetic, jam-nut mounting - Product standard |
| ISO 19632:2015 | Aerospace series Fitting end, 24 internal cone, external thread, flareless type extra fine thread pitch inch series Design standard |
| BS EN 3646-004:2015 | Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous Receptacle, jam-nut mounting. Product standard |
| 11/30250206 DC : 0 | BS EN 6140 - AEROSPACE SERIES - PLUG, PROTECTIVE, NON METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |
| BS EN 6029:2017 | Aerospace series. Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel. Dimensions and loads. Inch series |
| PREN 6098 : DRAFT 2018 | AEROSPACE SERIES - ROD-END WITH BEARING PER EN 6097 IN CORROSION RESISTING STEEL, EXTRA WIDE INNER RING, EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6055 : DRAFT 2018 | AEROSPACE SERIES - ROD-END WITH BEARING PER EN 4265 IN CORROSION RESISTING STEEL, EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6133 : DRAFT 2018 | AEROSPACE SERIES - ROD-END, WITH BEARING PER EN 6096, WITH SELF-LUBRICATING LINER IN CORROSION RESISTING STEEL, EXTRA WIDE INNER RING, EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6029 : 200P2 | AEROSPACE SERIES - ROD-ENDS, ADJUSTABLE, SINGLE FORK WITH UNJ THREADED SHANK MIN. ENGAGEMENT: 1,5 X THREAD DIAMETER IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 6024 : 200P3 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK REDUCED HEAD OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE SHANK, SHORT THREAD IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C - INCH SERIES |
| PREN 6056 : DRAFT 2018 | AEROSPACE SERIES - ROD-END WITH BEARING PER EN 4614 WITH SELF LUBRICATING LINER IN CORROSION RESISTING STEEL WITH EXTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| ISO 15872:2017 | Aerospace — UNJ threads — Gauging |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.