ISO 2811-1:2016
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Paints and varnishes — Determination of density — Part 1: Pycnometer method
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
18-01-2023
Superseded by
Language(s)
French, English
Published date
17-02-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 2811-1:2016 specifies a method for determining the density of paints, varnishes and related products using a metal or Gay-Lussac pycnometer.
The method is limited to materials of low or medium viscosity at the temperature of test. The Hubbard pycnometer (see ISO 3507) can be used for highly viscous materials.
| DevelopmentNote |
Together with ISO 2811-2, ISO 2811-3 and ISO 2811-4, supersedes ISO 2811 and ISO 8962. (04/2001) Supersedes ISO/DIS 2811-1. (02/2016)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 2811-1 : 2016 | Identical |
| DS EN ISO 2811-1 : 2016 | Identical |
| IS 101 : Part 1 : Sec 7 : 2020 | Identical |
| NBN EN ISO 2811-1 : 2016 | Identical |
| NEN EN ISO 2811-1 : 2016 | Identical |
| NS EN ISO 2811-1 : 2016 | Identical |
| I.S. EN ISO 2811-1:2016 | Identical |
| SN EN ISO 2811-1:2016 | Identical |
| UNI EN ISO 2811-1 : 2011 | Identical |
| SS-EN ISO 2811-1 : 2016 | Identical |
| UNI EN ISO 2811-1 : 2016 | Identical |
| UNE-EN ISO 2811-1:2016 | Identical |
| BS EN ISO 2811-1:2016 | Identical |
| EN ISO 2811-1:2016 | Identical |
| NF EN ISO 2811-1 : 2016 | Identical |
| DIN EN ISO 2811-1:2016-08 | Identical |
| BS 3900-A19(1998) : 1998 AMD 13290 | Identical |
| PN EN ISO 2811-1 : 2016 | Identical |
| NEN ISO 2811-1 : 1998 | Identical |
| DIN 53217-2:1991-03 | Corresponds |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| I.S. EN 10329:2006 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| 13/30283193 DC : 0 | BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS |
| 08/30181243 DC : DRAFT APR 2008 | BS EN ISO 7579 - DYESTUFFS - DETERMINATION OF SOLUBILITY IN ORGANIC SOLVENTS - GRAVIMETRIC AND PHOTOMETRIC METHODS |
| DIN EN ISO 277:2011-02 | Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002) |
| BS ISO 150 : 2006 AMD 17093 | RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
| PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| 10/30215721 DC : 0 | BS EN ISO 3233 - PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE DENSITY OF A DRIED COATING |
| BS 6782-14.1(2000) : 2000 AMD 10883 | BINDERS FOR PAINTS AND VARNISHES - PART 14 - METHODS OF TEST FOR ALKYD RESINS - SECTION 14.1 - GENERAL METHODS |
| ONORM EN 4687 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| BS EN 3021:2017 | Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification |
| BS 6782-16.1(2000) : 2000 AMD 15238 | BINDERS FOR PAINTS AND VARNISHES - PART 16: METHODS FOR TEST FOR ALKYD RESINS - SECTION 16.1: GENERAL METHODS |
| BS 3900-A24(2000) : 2000 AMD 13286 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A24: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A GAS CHROMATOGRAPHIC METHOD |
| 08/30184633 DC : DRAFT SEP 2008 | BS EN 1871 - ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
| BS EN 16074:2011 | Paints and varnishes. Determination of non-volatile matter content and spreading rate of coil coating materials |
| PREN 2435-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| PREN 3021 : DRAFT 2015 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| BS EN ISO 12215-1:2000 | Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate |
| ISO 4619:1998 | Driers for paints and varnishes |
| I.S. EN ISO 150:2007 | RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
| I.S. EN 3021:2017 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| I.S. EN 15651-4:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| DIN EN ISO 4619:2011-02 | DRIERS FOR PAINTS AND VARNISHES |
| UNE-EN 15651-4:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways |
| XP P98 633 : 2001 XP | HORIZONTAL ROAD MARKING - MARKINGS APPLIED ON THE ROADS - DETERMINATION OF FAST IDENTIFICATION PROPERTIES |
| UNI EN ISO 4619 : 2011 | DRIERS FOR PAINTS AND VARNISHES |
| EN ISO 150:2007 | Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2006) |
| DIN EN ISO 11890-2:2013-07 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| I.S. EN ISO 2808:2007 | PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
| DIN EN ISO 7579:2010-03 | Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009) |
| DIN EN 1504-2:2015-03 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
| BS EN 2436-006:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer High corrosion resistance for military application |
| BS EN ISO 17895:2005 | Paints and varnishes. Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
| BS EN ISO 7579:2009 | Dyestuffs. Determination of solubility in organic solvents. Gravimetric and photometric methods |
| BS EN ISO 11909:2007 | Binders for paints and varnishes. Polyisocyanate resins. General methods of test |
| BS EN ISO 2808:2007 | Paints and varnishes. Determination of film thickness |
| ISO 3233-3:2015 | Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| EN 12802:2011 | Road marking materials - Laboratory methods for identification |
| EN 10339:2007 | Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
| DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| ISO 14448:2016 | Low modulus adhesives for exterior tile finishing |
| BS EN ISO 3233-1:2013 | Paints and varnishes. Determination of the percentage volume of non-volatile matter Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle |
| BS 3900-D11:1998 | Methods of test for paints. Optical tests on paint films Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate |
| BS EN ISO 4619:2010 | Driers for paints and varnishes |
| 11/30242926 DC : DRAFT MAY 2011 | BS ISO 12000 - PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS |
| I.S. EN 15651-2:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
| BS EN ISO 14446:2010 | Binders for paints and varnishes. Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions |
| I.S. EN ISO 16000-11:2006 | INDOOR AIR - PART 11: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - SAMPLING, STORAGE OF SAMPLES AND PREPARATION OF TEST SPECIMENS |
| 14/30280554 DC : 0 | BS ISO 14448 - LOW MODULUS ADHESIVES FOR EXTERIOR TILE FINISHING |
| BS ISO 705:2015 | Rubber latex. Determination of density between 5 °C and 40 °C |
| 04/30124059 DC : DRAFT OCT 2004 | ISO 150 - RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
| 14/30304007 DC : 0 | BS EN 62899-2-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 2-1: CONDUCTIVE MATERIAL INK |
| BS ISO 14448:2016 | Low modulus adhesives for exterior tile finishing |
| 04/30114371 DC : DRAFT JUN 2004 | EN 10339 - STEEL TUBES FOR ONSHORE AND OFFSHORE WATER PIPELINES - INTERNAL LIQUID APPLIED EPOXY LININGS FOR CORROSION PROTECTION |
| DIN EN 15651-1:2016-10 (Draft) | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
| DIN EN ISO 3233-1:2013-05 | PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY-FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
| ISO 12000:2014 | Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods |
| BS EN ISO 277:2010 | Binders for paints and varnishes. Raw tung oil. Requirements and methods of test |
| DIN EN 15651-4:2016-10 (Draft) | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| 04/30109201 DC : DRAFT OCT 2004 | EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| 08/30184630 DC : DRAFT SEP 2008 | BS EN 12802 - ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
| I.S. EN ISO 277:2010 | BINDERS FOR PAINTS AND VARNISHES - RAW TUNG OIL - REQUIREMENTS AND METHODS OF TEST |
| BS ISO 277 : 2002 | BINDERS FOR PAINTS AND VARNISHES - RAW TUNG OIL - REQUIREMENTS AND METHODS OF TEST |
| DIN EN ISO 150:2007-05 | RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
| BS EN 15651-3:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for sanitary joints |
| I.S. EN 4687:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| I.S. EN 16074:2011 | PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
| BS EN 15814 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| I.S. EN ISO 23811:2009 | PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE |
| I.S. EN 15814:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| NF EN ISO 14446 : 2011 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS |
| I.S. EN ISO 12058-1:2002 | PLASTICS - DETERMINATION OF VISCOSITY USING A FALLING-BALL VISCOMETER - PART 1: INCLINED-TUBE METHOD |
| NF EN ISO 4619 : 2011 | DRIERS FOR PAINTS AND VARNISHES |
| I.S. EN ISO 6504-3:2007 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| BS EN ISO 6504-3:2007 | Paints and varnishes. Determination of hiding power Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
| DIN EN 12802:2011-12 | Road marking materials - Laboratory methods for identification |
| BS EN ISO 10082:2000 | Plastics. Phenolic resins. Classification and test methods |
| ISO 16000-11:2006 | Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens |
| UNE-EN ISO 11890-2:2013 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
| BS EN ISO 11890-1:2007 | Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method |
| EN ISO 11890-2:2013 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
| I.S. EN ISO 11909:2007 | BINDERS FOR PAINTS AND VARNISHES - POLYISOCYANATE RESINS - GENERAL METHODS OF TEST |
| I.S. EN 12802:2011 | ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
| I.S. EN ISO 7579:2009 | DYESTUFFS - DETERMINATION OF SOLUBILITY IN ORGANIC SOLVENTS - GRAVIMETRIC AND PHOTOMETRIC METHODS |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| DIN ISO 6744-1:2002-11 | BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART 1: GENERAL METHOD OF TEST |
| I.S. EN 1504-5:2013 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
| UNI EN 4687 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| DIN EN ISO 12058-1:2002-12 | PLASTICS - DETERMINATION OF VISCOSITY USING A FALLING-BALL VISCOMETER - PART 1: INCLINED-TUBE METHOD |
| I.S. EN ISO 11890-1:2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| I.S. EN ISO 7143:2007 | BINDERS FOR PAINTS AND VARNISHES - METHODS OF TEST FOR CHARACTERIZING WATER-BASED BINDERS |
| ONORM EN ISO 11890-2 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
| BS 3900-A10:1998 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating |
| BS 3900-D11(2007) : 2007 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| BS 3900-C5(2007) : 2007 | PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
| 03/309868 DC : DRAFT AUG 2003 | PREN ISO/DIS 17895 - PAINTS AND VARNISHES - DETERMINATION OF THE VOLATILE ORGANIC COMPOUND (IN-CAN VOC) CONTENT OF WATER-BASED EMULSION PAINTS |
| ISO 705:2015 | Rubber latex Determination of density between 5 degrees C and 40 degrees C |
| 09/30205302 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| UNE-EN 15651-1:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements |
| 17/30336222 DC : 0 | BS EN 62899-203 - PRINTED ELECTRONICS - PART 203 - MATERIALS - SEMICONDUCTOR INK |
| DIN EN 15651-2:2016-10 (Draft) | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
| BS IEC 62899-202:2016 | Printed electronics Materials. Conductive ink |
| BS EN ISO 12058-1:2002 | Plastics. Determination of viscosity using a falling-ball viscometer Inclined-tube method |
| I.S. EN 15651-3:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
| 18/30369599 DC : 0 | BS EN ISO 150 - RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN 15651-3:2016-10 (Draft) | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
| BS 3900-A23(2000) : 2000 AMD 13285 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A 23: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A DIFFERENCE METHOD |
| BS 3900-K2(2001) : 2001 AMD 15246 | METHODS OF TEST FOR PAINTS - GROUP K: DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART K2: DETERMINATION OF COPPER-ION CONCENTRATION IN THE EXTRACT AND CALCULATION OF THE RELEASE RATE |
| I.S. EN ISO 4619:2010 | DRIERS FOR PAINTS AND VARNISHES |
| NF EN ISO 277 : 2011 | BINDERS FOR PAINTS AND VARNISHES - RAW TUNG OIL - REQUIREMENTS AND METHODS OF TEST |
| BS EN ISO 23811:2009 | Paints and varnishes. Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating material, and calculation of the theoretical spreading rate |
| DIN EN ISO 14446:2011-02 | Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
| UNE-EN ISO 3233-3:2015 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO/FDIS 3233-3:2014) |
| UNI EN 16074 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| PREN 2436-06 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 06: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| PREN 2434-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| IEC 62899-202:2016 | Printed electronics - Part 202: Materials - Conductive ink |
| I.S. EN ISO 3233-1:2013 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
| ISO 12215-1:2000 | Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
| I.S. EN 15651-1:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
| UNE-EN ISO 14446:2011 | Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
| UNI EN ISO 3233-1 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE |
| PREN 12542 : DRAFT 2016 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| EN ISO 6504-3:2007 | Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate (ISO 6504-3:2006) |
| DIN EN ISO 7143:2007-05 | Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007) |
| DIN EN ISO 11890-1:2007-09 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| BS EN 10329 : 2005 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| BS EN 13966-1:2003 | Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials Flat panels |
| ISO 17895:2005 | Paints and varnishes — Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
| BS EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
| ISO 6504-3:2006 | Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
| BS EN ISO 6744-1:2004 | Binders for paints and varnishes. Alkyd resins General methods |
| UNE-EN ISO 7579:2010 | Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009) |
| UNE-EN ISO 3233-1:2013 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013) |
| DIN EN 1504-2:2005-01 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
| I.S. EN ISO 11890-2:2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| DIN EN 1504-7:2006-11 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
| EN ISO 4619:2010 | Driers for paints and varnishes (ISO 4619:1998) |
| UNI EN ISO 11890-2 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD |
| EN 1504-5:2013 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection |
| EN ISO 16000-11:2006 | Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
| UNI EN 1504-7 : 2007 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
| UNI EN ISO 7579 : 2009 | DYESTUFFS - DETERMINATION OF SOLUBILITY IN ORGANIC SOLVENTS - GRAVIMETRIC AND PHOTOMETRIC METHODS |
| UNI EN 10245-1 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| UNI EN 1504-5 : 2013 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
| UNI EN 12802 : 2011 | ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
| ISO 3233:1998 | Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
| 13/30266799 DC : 0 | BS EN ISO 3233-3 - PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL |
| BS EN ISO 12736:2014 | Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| 09/30205293 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| 09/30205299 DC : 0 | BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| UNI EN ISO 23811 : 2009 | PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE |
| UNI EN ISO 14446 : 2011 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS |
| 03/310937 DC : DRAFT JUNE 2003 | EN 2436-6 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE FREE TWO COMPONENT COLD CURING PRIMER - PART 6: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| 17/30358597 DC : 0 | BS EN ISO 4619 - DRIERS FOR PAINTS AND VARNISHES |
| BS EN ISO 3233-3:2015 | Paints and varnishes. Determination of the percentage volume of non-volatile matter Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material |
| 15/30309743 DC : 0 | BS ISO 19403-3 - PAINTS AND VARNISHES - WETTABILITY - PART 3: DETERMINATION OF THE SURFACE TENSION OF LIQUIDS USING THE PENDANT DROP METHOD |
| BS ISO 12000:2014 | Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| BS 6782-11(1999) : 1999 | BINDERS FOR PAINTS - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND THEIR CLASSIFICATION |
| UNE-EN 15651-3:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints |
| I.S. EN ISO 3233-3:2015 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO/FDIS 3233-3:2014) |
| UNI EN ISO 277 : 2011 | BINDERS FOR PAINTS AND VARNISHES - RAW TUNG OIL - REQUIREMENTS AND METHODS OF TEST |
| BS EN ISO 150:2007 | Raw, refined and boiled linseed oil for paints and varnishes. Specifications and methods of test |
| PREN 4588 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT, COLD CURING POLYURETHANE PAINT, ANTI SLIP |
| UNE-EN 15814:2011 | Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
| I.S. EN ISO 14446:2010 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS |
| I.S. EN ISO 12736:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| UNE 135202:2010 | Road signalization equipment. Horizontal signalisation. Paints and cold plastic. Drying time "no pick-up". |
| NF EN ISO 12215-1 : 2001 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 1: MATERIALS: THERMOSETTING RESINS, GLASS-FIBRE REINFORCEMENT, REFERENCE LAMINATE |
| 16/30326248 DC : 0 | BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| 15/30316975 DC : 0 | BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| ONORM EN ISO 3233-1 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
| DIN EN ISO 11909:2007-05 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
| BS EN ISO 7143:2007 | Binders for Paints and varnishes. Methods of test for characterizing water-based binders |
| UNE-EN 1504-2:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| BS EN 12802:2011 | Road marking materials. Laboratory methods for identification |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
| BS EN ISO 11890-2:2013 | Paints and varnishes. Determination of volatile organic compound (VOC) content Gas-chromatographic method |
| BS EN 10339:2007 | Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| ISO 6744-1:1999 | Binders for paints and varnishes — Alkyd resins — Part 1: General methods of test |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 11909:2007 | Binders for paints and varnishes — Polyisocyanate resins — General methods of test |
| ISO 7579:2009 | Dyestuffs — Determination of solubility in organic solvents — Gravimetric and photometric methods |
| UNE-EN 16074:2011 | Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
| BS EN 1504-5:2013 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Concrete injection |
| ISO 23811:2009 | Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| ISO 277:2002 | Binders for paints and varnishes — Raw tung oil — Requirements and methods of test |
| BS EN 2435-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| ISO 12736:2014 | Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| UNE-EN 12802:2012 | Road marking materials - Laboratory methods for identification |
| UNE-EN ISO 4619:2011 | Driers for paints and varnishes (ISO 4619:1998) |
| ISO 14446:1999 | Binders for paints and varnishes — Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN 15651-2:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN ISO 3233-1:2013 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013) |
| EN 15814:2011+A2:2014 | Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
| EN ISO 11909:2007 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| EN ISO 3233-3:2015 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO 3233-3:2015) |
| EN ISO 7579:2009 | Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009) |
| EN 15651-3:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| EN ISO 17895:2005 | Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
| EN 2434-005:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application |
| EN ISO 23811:2009 | Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009) |
| EN 2435-005:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application |
| EN ISO 6744-1:2004 | Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
| EN ISO 12736:2014 | Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
| EN 1504-7:2006 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
| EN ISO 277:2010 | Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002) |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| EN ISO 14446:2010 | Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
| EN 16074:2011 | Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials |
| EN ISO 7143:2007 | Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007) |
| EN 2436-006:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
| EN 15651-1:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements |
| EN 13966-1:2003 | Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels |
| EN 3021:2017 | Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification |
| BS ISO 4619 : 1998 | DRIERS FOR PAINTS AND VARNISHES |
| DIN EN ISO 3233-3:2015-09 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO 3233-3:2015) |
| 98/124702 DC : DRAFT OCT 1998 | DRAFT BS 3900-K3 - METHODS OF TEST FOR PAINTS - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - DETERMINATION OF TIN-BASED BIOCIDES IN THE EXTRACT AND CALCULATION OF THE RELEASE RATE |
| 11/30187339 DC : 0 | BS EN ISO 12736 - PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| ONORM EN 4689 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| 12/30215682 DC : 0 | BS EN ISO 3233-2 - PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: DETERMINATION BY MEASUREMENT OF THE DRY-FILM DENSITY |
| 04/30123574 DC : DRAFT OCT 2004 | EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| BS 6782-18(2001) : 2001 AMD 15243 | BINDERS FOR PAINTS - PART 18: GENERAL METHODS OF TEST FOR WATER-DILUTABLE BINDERS |
| DIN EN 15814:2015-03 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS |
| DIN EN ISO 23811:2009-08 | PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| PREN 1504-7 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
| UNE-EN 15651-2:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
| 02/564964 DC : DRAFT NOV 2002 | EN 13419-3 - BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 3: PROCEDURE FOR SAMPLING, STORAGE OF SAMPLES AND PREPARATION OF TEST SPECIMENS |
| 00/103366 DC : DRAFT APR 2000 | PREN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| DIN EN 16074:2011-09 | PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS |
| BS EN 15651-2:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for glazing |
| BS EN 15651-1:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for facade elements |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| UNE-EN ISO 277:2011 | Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002) |
| 15/30327125 DC : 0 | BS EN 1504-7 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
| EN ISO 12215-1:2000 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
| ISO 3233-1:2013 | Paints and varnishes Determination of the percentage volume of non-volatile matter Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle |
| ISO 12058-1:1997 | Plastics Determination of viscosity using a falling-ball viscometer Part 1: Inclined-tube method |
| ISO 150:2006 | Raw, refined and boiled linseed oil for paints and varnishes Specifications and methods of test |
| DIN EN 1504-7:2015-09 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
| DIN EN ISO 16000-11:2006-06 | Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
| DIN EN ISO 6504-3:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| DIN EN ISO 17895:2005-06 | Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
| DIN EN 1504-5:2013-06 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
| BS EN 1504-7:2006 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Reinforcement corrosion protection |
| BS EN ISO 16000-11:2006 | Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Sampling, storage of samples and preparation of test specimens |
| BS EN 2434-005 : 2006 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| ISO 7143:2007 | Binders for paints and varnishes — Methods of test for characterizing water-based binders |
| DIN EN 15651-3:2017-07 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
| DIN EN ISO 6744-1:2004-09 | Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 10329:2006 | Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
| DIN EN 10329:2006-04 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| DIN EN 10339:2007-05 | Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
| ONORM EN ISO 12736 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| ONORM EN ISO 11890-1 : 2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| ONORM EN ISO 16000-11 : 2006 | INDOOR AIR - PART 11: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - SAMPLING, STORAGE OF SAMPLES AND PREPARATION OF TEST SPECIMENS |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| AS 14448:2020 | Low modulus adhesives for exterior tile finishing (ISO 14448:2016, MOD) |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3507:1999 | Laboratory glassware — Pyknometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.