ISO 27891:2015
Current
The latest, up-to-date edition.
Aerosol particle number concentration — Calibration of condensation particle counters
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
27-02-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 27891:2015 describes methods to determine the detection efficiency of condensation particle counters (CPCs) at particle number concentrations ranging between 1 cm-3 and 105 cm-3, together with the associated measurement uncertainty. In general, the detection efficiency will depend on the particle number concentration, the particle size, and the particle composition. The particle sizes covered by the methods described in this International Standard range from approximately 5 nm to 1 000 nm.
The methods can therefore be used both to determine a CPC calibration factor to be applied across the range of larger particle sizes where the detection efficiency is relatively constant (the plateau efficiency), and to characterize the drop in CPC detection efficiency at small particle sizes, near the lower detection limit. These parameters are described in more detail in Annex A.
The methods are suitable for CPCs whose inlet flows are between approximately 0,1 l/min and 5 l/min.
This International Standard describes a method for estimating the uncertainty of a CPC calibration performed according to this International Standard.
| Committee |
ISO/TC 24/SC 4
|
| DevelopmentNote |
Supersedes ISO/DIS 27891. (03/2015)
|
| DocumentType |
Standard
|
| Pages |
119
|
| ProductNote |
THIS SATANDARD ALSO REFERS TO VDI 3491-19
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NEN ISO 27891 : 2015 | Identical |
| BS ISO 27891:2015 | Identical |
| JIS Z 8850:2018 | Identical |
| PD CEN ISO/TS 12025:2015 | Nanomaterials. Quantification of nano-object release from powders by generation of aerosols |
| PD ISO/TR 18196:2016 | Nanotechnologies. Measurement technique matrix for the characterization of nano-objects |
| BS PD ISO/TS 12025 : 2012 | NANOMATERIALS - QUANTIFICATION OF NANO-OBJECT RELEASE FROM POWDERS BY GENERATION OF AEROSOLS |
| S.R. CEN/TS 16976:2016 | AMBIENT AIR - DETERMINATION OF THE PARTICLE NUMBER CONCENTRATION OF ATMOSPHERIC AEROSOL |
| 15/30317318 DC : 0 | BS EN 16897 - WORKPLACE EXPOSURE - CHARACTERIZATION OF ULTRAFINE AEROSOLS/NANOAEROSOLS - DETERMINATION OF NUMBER CONCENTRATION USING CONDENSATION PARTICLE COUNTERS |
| DIN EN 16897:2015-09 (Draft) | WORKPLACE EXPOSURE - CHARACTERIZATION OF ULTRAFINE AEROSOLS/NANOAEROSOLS - DETERMINATION OF NUMBER CONCENTRATION USING CONDENSATION PARTICLE COUNTERS |
| 17/30335786 DC : 0 | BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY |
| 16/30323504 DC : DRAFT JAN 2016 | BS EN 16966 - WORKPLACE EXPOSURE - METRICS TO BE USED FOR THE MEASUREMENTS OF EXPOSURE TO INHALED NANOPARTICLES (NANO-OBJECTS AND NANOSTRUCTURED MATERIALS) SUCH AS MASS CONCENTRATION, NUMBER CONCENTRATION AND SURFACE AREA CONCENTRATION |
| ISO 19867-1:2018 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
| S.R. EN 16897:2017 | WORKPLACE EXPOSURE - CHARACTERIZATION OF ULTRAFINE AEROSOLS/NANOAEROSOLS - DETERMINATION OF NUMBER CONCENTRATION USING CONDENSATION PARTICLE COUNTERS |
| PREN 16966 : DRAFT 2016 | WORKPLACE EXPOSURE - METRICS TO BE USED FOR THE MEASUREMENTS OF EXPOSURE TO INHALED NANOPARTICLES (NANO-OBJECTS AND NANOSTRUCTURED MATERIALS) SUCH AS MASS CONCENTRATION, NUMBER CONCENTRATION AND SURFACE AREA CONCENTRATION |
| PREN 17199-4 : DRAFT 2017 | WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 4: SMALL ROTATING DRUM METHOD |
| VDI 3491 Blatt 2:2017-01 | Measurement of particles - Methods for generating test aerosols - Dispersing liquids |
| 18/30353364 DC : 0 | BS EN 17199-3 - WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 3: CONTINUOUS DROP METHOD |
| CEN ISO/TS 12025:2015 | Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012) |
| BS EN 16897:2017 | Workplace exposure. Characterization of ultrafine aerosols/nanoaerosols. Determination of number concentration using condensation particle counters |
| 17/30345947 DC : 0 | BS EN ISO 21083-1 - TEST METHOD TO MEASURE THE EFFICIENCY OF AIR FILTRATION MEDIA AGAINST SPHERICAL NANOMATERIALS - PART 1: PARTICLE SIZE RANGE FROM 20 TO 500 NM |
| ISO 21501-4:2007 | Determination of particle size distribution Single particle light interaction methods Part 4: Light scattering airborne particle counter for clean spaces |
| ISO/TS 12025:2012 | Nanomaterials Quantification of nano-object release from powders by generation of aerosols |
| EN 16897:2017 | Workplace exposure - Characterization of ultrafine aerosols/nanoaerosols - Determination of number concentration using condensation particle counters |
| 13/30261893 DC : 0 | BS EN ISO 14644-12 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 12: CLASSIFICATION OF AIR CLEANLINESS BY NANOSCALE PARTICLE CONCENTRATION |
| S.R. CEN ISO/TS 12025:2015 | NANOMATERIALS - QUANTIFICATION OF NANO-OBJECT RELEASE FROM POWDERS BY GENERATION OF AEROSOLS (ISO/TS 12025:2012) |
| 18/30353370 DC : 0 | BS EN 17199-4 - WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 4: SMALL ROTATING DRUM METHOD |
| PREN 17199-3 : DRAFT 2017 | WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 3: CONTINUOUS DROP METHOD |
| ISO/TR 18196:2016 | Nanotechnologies — Measurement technique matrix for the characterization of nano-objects |
| DIN EN 16897:2017-09 | WORKPLACE EXPOSURE - CHARACTERIZATION OF ULTRAFINE AEROSOLS/NANOAEROSOLS - DETERMINATION OF NUMBER CONCENTRATION USING CONDENSATION PARTICLE COUNTERS |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 21501-1:2009 | Determination of particle size distribution — Single particle light interaction methods — Part 1: Light scattering aerosol spectrometer |
| ISO 15900:2009 | Determination of particle size distribution Differential electrical mobility analysis for aerosol particles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.