ISO 24453:2008
Current
The latest, up-to-date edition.
Rubber Acquisition and presentation of comparable single-point data
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
22-04-2008
ISO 24453:2008 identifies specific test procedures for the acquisition and presentation of comparable single-point data for properties of rubber compounds. In general, each property is specified by a single test method and a single experimental value although, in certain cases, properties may be represented by more than one value obtained under different test conditions. The properties presented are those used to characterize processing properties, those most often quoted by manufacturers and in material specifications, and those relevant to more specific applications. An important application consists in helping different suppliers produce material specification sheets in which the same set of properties is measured using the same conditions.
DevelopmentNote |
Supersedes ISO/DIS 24453. (04/2008)
|
DocumentType |
Standard
|
Pages |
8
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
BS ISO 24453:2008 | Identical |
NEN ISO 24453 : 2008 | Identical |
BS ISO 24454:2008 | Rubber. Acquisition and presentation of comparable multi-point data |
ISO 24454:2008 | Rubber Acquisition and presentation of comparable multi-point data |
ISO 812:2017 | Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness |
ISO 1432:2013 | Rubber, vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test) |
ISO 2921:2011 | Rubber, vulcanized Determination of low-temperature retraction (TR test) |
ISO 815-2:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures |
ISO 813:2016 | Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method |
ISO 4662:2017 | Rubber, vulcanized or thermoplastic Determination of rebound resilience |
ISO 11345:2006 | Rubber — Assessment of carbon black and carbon black/silica dispersion — Rapid comparative methods |
ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
ISO 815-1:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
ISO 4649:2017 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
ISO 8013:2012 | Rubber, vulcanized Determination of creep in compression or shear |
ISO 1827:2016 | Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods |
ISO 2230:2002 | Rubber products — Guidelines for storage |
ISO 34-1:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
ISO 4666-3:2016 | Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type) |
ISO 6502:2016 | Rubber Guide to the use of curemeters |
ISO 3865:2005 | Rubber, vulcanized or thermoplastic Methods of test for staining in contact with organic material |
ISO 2285:2013 | Rubber, vulcanized or thermoplastic Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load |
ISO 6179:2017 | Rubber, vulcanized or thermoplastic Rubber sheets and rubber-coated fabrics Determination of transmission rate of volatile liquids (gravimetric technique) |
ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
ISO 15113:2005 | Rubber — Determination of frictional properties |
IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
ISO 3384:2005 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures |
ISO 2782:2006 | Rubber, vulcanized or thermoplastic Determination of permeability to gases |
ISO 289-1:2015 | Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 1: Determination of Mooney viscosity |
ISO 289-2:2016 | Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 2: Determination of pre-vulcanization characteristics |
BS 903-A18:1973 | Physical testing of rubber Determination of equilibrium water vapour absorption |
ISO 2007:2007 | Rubber, unvulcanized Determination of plasticity Rapid-plastimeter method |
ISO 2393:2014 | Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures |
ISO 7743:2017 | Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
ISO 3387:2012 | Rubber Determination of crystallization effects by hardness measurements |
ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
ISO 9026:2007 | Raw rubber or unvulcanized compounds Determination of green strength |
ISO 36:2017 | Rubber, vulcanized or thermoplastic Determination of adhesion to textile fabrics |
ISO 1853:2011 | Conducting and dissipative rubbers, vulcanized or thermoplastic Measurement of resistivity |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
ISO 2781:2008 | Rubber, vulcanized or thermoplastic Determination of density |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.