ISO 23552-1:2007
Current
Current
The latest, up-to-date edition.
Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
09-10-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 23552-1:2007 specifies safety, construction and performance requirements for electronic fuel/air ratio control systems intended for use with gas or oil burners and gas or oil burning appliances. ISO 23552-1:2007 also describes the test procedures for evaluating these requirements and specifies information necessary for installation and use.
ISO 23552-1:2007 is applicable only to closed-loop fuel/air ratio controls and does not differentiate into classes by heat input.
ISO 23552-1:2007 applies to electronic fuel/air ratio control systems that can be tested independently or as part of an appliance or as part of a burner.
| DevelopmentNote |
Supersedes ISO/DIS 23552-1. (10/2007)
|
| DocumentType |
Standard
|
| Pages |
21
|
| ProductNote |
THIS STANDARD ALSO REEFERS TO IEC 60050:1987
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NEN ISO 23552-1 : 2007 AMD 1 2010 | Identical |
| CSA C22.2 No. 24 : 2015 | TEMPERATURE-INDICATING AND -REGULATING EQUIPMENT |
| ISO 22968:2010 | Forced draught oil burners |
| ISO 22967:2010 | Forced draught gas burners |
| ISO 23551-8:2016 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8: Multifunctional controls |
| BS ISO 22968:2010 | Forced draught oil burners |
| 15/30313338 DC : 0 | BS ISO 23551-8 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 8: MULTIFUNCTIONAL CONTROLS |
| BS ISO 23551-10:2016 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Vent valves |
| BS ISO 23551-8:2016+A1:2019 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Multifunctional controls |
| BS ISO 23551-8:2016 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Multifunctional controls |
| ISO 23551-10:2016 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 10: Vent valves |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| DIN EN 267:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 267:2011-11 | Automatic forced draught burners for liquid fuels |
| 13/30231511 DC : 0 | BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| 12/30258099 DC | BS EN 267. Forced draught burners for liquid fuels |
| UNI EN 267 : 2011 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| BS ISO 22967:2010 | Forced draught gas burners |
| ISO 23551-1:2012 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| ISO 23551-5:2014 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 5: Manual gas valves |
| I.S. EN 267:2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
| BS ISO 23551-5:2014 | Safety and control devices for gas burners and gas-burning appliances Manual gas valves |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
| CSA 3.8 : 2014 | GAS-FIRED EQUIPMENT FOR DRYING FARM CROPS |
| ISO 9488:1999 | Solar energy Vocabulary |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 9713:2002 | Neurosurgical implants Self-closing intracranial aneurysm clips |
| ISO 14956:2002 | Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty |
| ISO 21647:2004 | Medical electrical equipment Particular requirements for the basic safety and essential performance of respiratory gas monitors |
| IEC 60546-1:2010 | Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the performance |
| IEC 60747-14-1:2010 | Semiconductor devices - Part 14-1: Semiconductor sensors - Generic specification for sensors |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60393-1:2008 | Potentiometers for use in electronic equipment - Part 1: Generic specification |
| IEC 60523:1975 | Direct-current potentiometers |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| IEC 60730-2-5:2013+AMD1:2017 CSV | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| IEC 60947-5-7:2003 | Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output |
| IEC 61083-1:2001 | Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments |
| IEC 60050-300:2001 | International Electrotechnical Vocabulary (IEV) - Part 300: Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument |
| ISO 23550:2011 | Safety and control devices for gas burners and gas-burning appliances General requirements |
| ISO 9169:2006 | Air quality Definition and determination of performance characteristics of an automatic measuring system |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.