ISO 23210:2009
Current
The latest, up-to-date edition.
Stationary source emissions Determination of PM10/PM2,5 mass concentration in flue gas Measurement at low concentrations by use of impactors
PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
24-07-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 23210:2009 specifies a standard reference method for the determination of PM10 and PM2,5 mass concentrations at stationary emission sources by use of two-stage impactors. The measurement method is especially suitable for measurements of mass concentrations below 40 mg/m3 as half-hourly averages in standard conditions (273 K, 1 013 hPa, dry gas). It is an acceptable method for the measurement in the flue gas of different installations, such as cement and steel production plants, as well as combustion processes.
ISO 23210:2009 is not applicable to the sampling of flue gases that are saturated with water vapour.
ISO 23210:2009 is not applicable where the majority of the particles are likely to exceed PM10, for example, in the case of raw gases or plant operating failures.
ISO 23210:2009 cannot be used for the determination of the total mass concentration of dust.
ISO 23210:2009 describes the design, use and theory of round-nozzle impactors. It does not exclude other types of impactors, provided these systems meet the performance criteria specified in ISO 23210:2009 in a validation of the impactor performed by an independent testing laboratory.
| DevelopmentNote |
Supersedes ISO/DIS 23210. (07/2009)
|
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 23210 : 2009 | Identical |
| NBN EN ISO 23210 : 2009 | Identical |
| NEN EN ISO 23210 : 2009 | Identical |
| NS EN ISO 23210 : 2009 | Identical |
| I.S. EN ISO 23210:2009 | Identical |
| PN EN ISO 23210 : 2010 | Identical |
| SN EN ISO 23210:2010 | Identical |
| UNI EN ISO 23210 : 2009 | Identical |
| SS-EN ISO 23210:2009 | Identical |
| UNE-EN ISO 23210:2010 | Identical |
| BS EN ISO 23210:2009 | Identical |
| EN ISO 23210:2009 | Identical |
| DIN EN ISO 23210:2009-12 | Identical |
| BS ISO 17211:2015 | Stationary source emissions. Sampling and determination of selenium compounds in flue gas |
| 11/30204376 DC : 0 | BS ISO 13271 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF PM10/PM2,5 MASS CONCENTRATION IN FLUE GAS - MEASUREMENT AT HIGHER CONCENTRATIONS BY USE OF VIRTUAL IMPACTORS |
| BS ISO 25597:2013 | Stationary source emissions. Test method for determining PM<sub>2,5</sub> and PM<sub>10</sub> mass in stack gases using cyclone samplers and sample dilution |
| ISO 19867-1:2018 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
| VDI 3803 Blatt 4:2012-09 | Air-conditioning, system requirements - Air filter systems (VDI Ventilation Code of Practice) |
| VDI 3461:2016-09 (Draft) | Emission control - Thermochemical gasification of biomass in cogeneration |
| VDI 3476 Blatt 1:2015-06 | Waste gas cleaning - Methods of catalytic waste gas cleaning - Fundamentals |
| VDI 4300 Blatt 11:2013-12 | Measurement of indoor air pollution - Measurement strategies for determination of airborne particles in indoor environment - PM-fraction |
| VDI 2441:2016-05 | Process gas and waste gas cleaning by cold plasma - Barrier discharge, corona discharge, UV radiation |
| VDI 2578:2017-05 | Emission control - Glassworks |
| VDI 2095 Blatt 1:2011-03 | Emission control - Treatment of mineral construction-site and demolition waste - Stationary and mobile demolition waste recycling facilities |
| VDI 2102 Blatt 2:2013-04 | Emission control - Copper and copper alloy melting plants |
| VDI 3475 Blatt 5:2015-10 | Emission control - Biological waste treatment facilities - Anaerobic digestion and post-treatment |
| 17/30335786 DC : 0 | BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY |
| ISO 17211:2015 | Stationary source emissions Sampling and determination of selenium compounds in flue gas |
| ISO 25597:2013 | Stationary source emissions Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution |
| ISO 13271:2012 | Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors |
| S.R. CWA 16060:2009 | ENVIRONMENTAL TECHNOLOGY VERIFICATION - AIR EMISSION ABATEMENT TECHNOLOGIES |
| UNE-CWA 16060:2010 IN | Environmental technology verification - Air emission abatement technologies |
| BS ISO 13271:2012 | Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 12141:2002 | Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method |
| ISO 7708:1995 | Air quality — Particle size fraction definitions for health-related sampling |
| ISO 4225:1994 | Air quality General aspects Vocabulary |
| ISO 14956:2002 | Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty |
| EN 15259:2007 | Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
| EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
| ISO 20988:2007 | Air quality Guidelines for estimating measurement uncertainty |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.