ISO 22262-1:2012
Current
The latest, up-to-date edition.
Air quality — Bulk materials — Part 1: Sampling and qualitative determination of asbestos in commercial bulk materials
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
29-06-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This part of ISO 22262 specifies methods for sampling bulk materials and identification of asbestos in commercial
bulk materials. This part of ISO 22262 specifies appropriate sample preparation procedures and describes in
detail the procedure for identification of asbestos by polarized light microscopy and dispersion staining.
This part of ISO 22262 also specifies simple procedures for separation of asbestos fibres from matrix materials
such as asphalt, cement, and plastics products. Optionally, identification of asbestos can be carried out using
scanning electron microscopy or transmission electron microscopy with energy dispersive X-ray analysis.
Information is also provided on common analytical problems, interferences and other types of fibre that may
be encountered in the analysis.
This part of ISO 22262 is applicable to qualitative identification of asbestos in specific types of manufactured
asbestos-containing products and commercial minerals. This part of ISO 22262 is applicable to the analysis
of fireproofing, thermal insulation, and other manufactured products or minerals in which asbestos fibres can
readily be separated from matrix materials for identification.
NOTE This part of ISO 22262 is intended for use by microscopists who are familiar with polarized light microscopy
methods and the other analytical procedures specified (References [16]?[19]). It is not the intention of this part of ISO 22262
to provide instruction in the fundamental analytical techniques.
| DevelopmentNote |
Supersedes ISO/DIS 22262-1. (07/2012)
|
| DocumentType |
Standard
|
| Pages |
70
|
| ProductNote |
THIS STANDARD ALSO REFERS-EPA/600/R-93/116:1993,MDHS 77
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| BS ISO 22262-1:2012 | Identical |
| JIS A 1481-1:2016 | Identical |
| NF ISO 22262-1 : 2012 | Identical |
| SS-ISO 22262-1 : 2012 | Identical |
| NEN ISO 22262-1 : 2012 | Identical |
| 15/30280916 DC : 0 | BS ISO 22262-3 - AIR QUALITY - BULK MATERIALS - PART 3: QUANTITATIVE DETERMINATION OF ASBESTOS BY X-RAY DIFFRACTION METHOD |
| BS ISO 22262-3:2016 | Air quality. Bulk materials Quantitative determination of asbestos by X-ray diffraction method |
| ASTM D 7521 : 2016 : REDLINE | Standard Test Method for Determination of Asbestos in Soil |
| ISO 22262-3:2016 | Air quality Bulk materials Part 3: Quantitative determination of asbestos by X-ray diffraction method |
| DIN ISO 16000-27:2014-11 | INDOOR AIR - PART 27: DETERMINATION OF SETTLED FIBROUS DUST ON SURFACES BY SEM (SCANNING ELECTRON MICROSCOPY) (DIRECT METHOD) (ISO 16000-27:2014) |
| DIN EN ISO 16000-32:2014-10 | INDOOR AIR - PART 32: INVESTIGATION OF BUILDINGS FOR THE OCCURRENCE OF POLLUTANTS (ISO 16000-32:2014) |
| ISO 16000-27:2014 | Indoor air — Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) |
| UNE-EN ISO 16000-32:2015 | Indoor air - Part 32: Investigation of buildings for the occurrence of pollutants (ISO 16000-32:2014) |
| ISO 22262-2:2014 | Air quality — Bulk materials — Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods |
| BS ISO 22262-2:2014 | Air quality. Bulk materials Quantitative determination of asbestos by gravimetric and microscopical methods |
| ISO 16000-32:2014 | Indoor air — Part 32: Investigation of buildings for the occurrence of pollutants |
| BS EN ISO 16000-32:2014 | Indoor air Investigation of buildings for the occurrence of pollutants |
| EN ISO 16000-32:2014 | Indoor air - Part 32: Investigation of buildings for the occurrence of pollutants (ISO 16000-32:2014) |
| 12/30250750 DC : 0 | BS ISO 22262-2 - AIR QUALITY - BULK MATERIALS - PART 2: QUANTITATIVE DETERMINATION OF ASBESTOS BY GRAVIMETRIC AND MICROSCOPICAL METHODS |
| VDI 3866 Blatt 1:2000-12 | Determination of asbestos in technical products - Principle - Sampling and sample preparation |
| ISO 14686:2003 | Hydrometric determinations — Pumping tests for water wells — Considerations and guidelines for design, performance and use |
| ISO 13794:1999 | Ambient air Determination of asbestos fibres Indirect-transfer transmission electron microscopy method |
| ISO 14952-1:2003 | Space systems — Surface cleanliness of fluid systems — Part 1: Vocabulary |
| ISO 14966:2002 | Ambient air Determination of numerical concentration of inorganic fibrous particles Scanning electron microscopy method |
| ISO 7348:1992 | Glass containers Manufacture Vocabulary |
| ISO 10934-1:2002 | Optics and optical instruments Vocabulary for microscopy Part 1: Light microscopy |
| AS 4964-2004 | Method for the qualitative identification of asbestos in bulk samples |
| VDI 3866 Blatt 5:2017-06 | Determination of asbestos in technical products - Scanning electron microscopy method |
| NFX 46 020 : 2017 | ASBESTOS SURVEY - SURVEY OF MATERIALS AND PRODUCTS CONTAINING ASBESTOS IN BUILDINGS - MISSION AND METHODOLOGY |
| ISO 10312:1995 | Ambient air Determination of asbestos fibres Direct transfer transmission electron microscopy method |
| VDI 3866 Blatt 4:2002-02 | Determination of asbestos in technical products - Phase contrast optical microscopy method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.