ISO 1889:2009
Current
Current
The latest, up-to-date edition.
Reinforcement yarns Determination of linear density
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian
Published date
26-06-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 1899:2009 specifies a method for the determination of the linear density of glass-fibre, carbon-fibre, aramid-fibre and any other reinforcement-fibre yarns.
It is applicable to all types of yarn, including single yarns, double and cabled yarns, textured yarns, rovings and staple-fibre yarns.
| DevelopmentNote |
Supersedes ISO 10120 (03/2001) Supersedes ISO/DIS 1889. (06/2009)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| JIS R 3911:2014 | Identical |
| GOST ISO 1889 : 2013 | Identical |
| NF EN ISO 1889 : 2009 | Identical |
| NBN EN ISO 1889 : 2009 | Identical |
| NEN EN ISO 1889 : 2009 | Identical |
| NS EN ISO 1889 : 2009 | Identical |
| I.S. EN ISO 1889:2009 | Identical |
| PN EN ISO 1889 : 2009 | Identical |
| SAC GB/T 7690-1 : 2013 | Identical |
| SN EN ISO 1889:2010 | Identical |
| UNI EN ISO 1889 : 2009 | Identical |
| UNE-EN ISO 1889:2010 | Identical |
| IS 17298 : 2019 | Identical |
| BS EN ISO 1889:2009 | Identical |
| EN ISO 1889:2009 | Identical |
| DIN EN ISO 1889:2009-10 | Identical |
| UNE 43505:1985 | Identical |
| BS ISO 8516:2011 | Textile glass. Textured yarns. Basis for a specification |
| DIN EN 16245-3:2013-08 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| BS EN 16245-3:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fibre |
| DIN EN 15422:2008-06 | Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes |
| 17/30336191 DC : DRAFT JUL 2017 | BS ISO 11567 - CARBON FIBRE - DETERMINATION OF FILAMENT DIAMETER AND CROSS-SECTIONAL AREA |
| BS EN 15422:2008 | Precast concrete products. Specification of glassfibres for reinforcement of mortars and concretes |
| ASTM C 1666/C1666M : 2008 | Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement |
| PREN 2833-3 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 3: GLASS FABRIC/EPOXY RESIN PREIMPREGNATE CURING AT UP 180 DEGREES C FOR CONTINUOUS USE UP TO 120 DEGREES C |
| PREN 2833-2 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 2: GLASS FABRIC/EPOXY RESIN PREIMPREGNATES CURING AT UP 125 DEGREES C FOR CONTINUOUS USE UP TO 80 DEGREES C |
| BS EN ISO 12215-1:2000 | Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate |
| I.S. EN 16245-4:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| UNI EN 16245-3 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| ISO 9163:2005 | Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| DIN EN ISO 10618:2004-11 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004) |
| EN 13121-1:2003 | GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions |
| BS EN 14020-3:2002 | Reinforcements. Specification for textile glass rovings Specific requirements |
| ISO 13002:1998 | Carbon fibre Designation system for filament yarns |
| DIN EN ISO 9163:2005-07 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005 |
| DIN EN 14649:2005-07 | PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST) |
| BS ISO 3598:2011 | Textile glass. Yarns. Basis for a specification |
| BS ISO 2797:2017 | Textile glass. Rovings. Basis for a specification |
| 98/123516 DC : DRAFT JULY 1998 | PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS |
| 10/30211421 DC : 0 | BS ISO 3598 - TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION |
| SAE AMS 2980/1 : 2014 | CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS |
| ISO 3598:2011 | Textile glass Yarns Basis for a specification |
| UNE-EN 16245-3:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| ISO 3341:2000 | Textile glass Yarns Determination of breaking force and breaking elongation |
| ISO 10371:1993 | Reinforcement materials — Braided tapes — Basis for a specification |
| ISO 10122:2014 | Reinforcement materials Tubular braided sleeves Basis for a specification |
| ISO 2797:2017 | Textile glass — Rovings — Basis for a specification |
| I.S. EN 2833-005:2013 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 005: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE |
| I.S. EN 15422:2008 | PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASSFIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES |
| BS EN 14118-2:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Methods of test and general requirements |
| UNE-EN ISO 1890:2010 | Reinforcement yarns - Determination of twist (ISO 1890:2009) |
| BS EN ISO 10618:2004 | Carbon fibre. Determination of tensile properties of resin-impregnated yarn |
| I.S. EN ISO 10618:2004 | CARBON FIBRE - DETERMINATION OF TENSILE PROPERTIES OF RESINIMPREGNATED YARN |
| I.S. EN ISO 1890:2009 | REINFORCEMENT YARNS - DETERMINATION OF TWIST |
| BS 3691:1990 | Specification for E glass fibre rovings for reinforcement of polyester and epoxy resin systems |
| DIN EN 16245-4:2013-07 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| BS ISO 13931:2013 | Carbon fibre. Determination of volume resistivity |
| I.S. EN 1007-2:2002 | ADVANCED TECHNICAL CERAMICS - CERAMICS COMPOSITES - METHODS OF TEST FOR REINFORCEMENT - PART 2: DETERMINATION OF LINEAR DENSITY |
| UNI EN 16245-4 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| 11/30239983 DC : DRAFT MAR 2011 | BS EN 16245-4 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| BS ISO 10371:1993 | Fibre reinforced plastics. Braided tapes for composite materials reinforcement. Basis for a specification |
| BS ISO 3341:2000 | Textile glass. Yarns. Determination of breaking force and breaking elongation |
| BS ISO 10122:2014 | Reinforcement materials. Tubular braided sleeves. Basis for a specification |
| UNI EN 2833-005 : 2014 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 005: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE |
| ACI 549.3R : 2009 | REPORT ON GLASS FIBER-REINFORCED CONCRETE PREMIX |
| PREN 2833-5 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 5: GLASS FABRIC/PHENOLIC RESIN PREIMPREGNATE |
| SAE AMS 2980/3 : 2014 | CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 3 - PURCHASING SPECIFICATION - FABRIC |
| ISO 12215-1:2000 | Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
| DIN EN ISO 1890:2009-10 | REINFORCEMENT YARNS - DETERMINATION OF TWIST |
| BS EN 13121-1:2003 | GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions |
| EN ISO 1890:2009 | Reinforcement yarns - Determination of twist (ISO 1890:2009) |
| UNI EN ISO 1890 : 2009 | REINFORCEMENT YARNS - DETERMINATION OF TWIST |
| EN 14020-3:2002 | Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
| ISO 3597-1:2003 | Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 1: General considerations and preparation of rods |
| 11/30209308 DC : 0 | BS ISO 13931 - CARBON FIBRE - DETERMINATION OF VOLUME RESISTIVITY |
| UNI EN 15422 : 2008 | PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASS-FIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES |
| 95/714421 DC : 0 | PREN 2833-3 - AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 3: GLASS FABRIC/EPOXY RESIN PREIMPREGNATE CURING AT UP TO 180 DEGREE C FOR CONTINUOUS USE UP TO 120 DEGREE C |
| BS ISO 3597-1:2003 | Textile-glass-reinforced plastics. Determination of mechanical properties on rods made of roving-reinforced resin General considerations and preparation of rods |
| BS ISO 9163 : 1996 AMD 10351 | TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| 11/30239980 DC : DRAFT MAR 2011 | BS EN 16245-3 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| UNE-EN 16245-4:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics |
| NF ISO 8516 : 2011 | TEXTILE GLASS - TEXTURED YARNS - BASIS FOR A SPECIFICATION |
| NF ISO 3598 : 2011 | TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION |
| XP PREN 2833-2 : 1995 XP | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 2: GLASS FABRIC/EPOXY RESIN PREIMPREGNATES CURING AT UPTO 125 DEGREES C FOR CONTINUOUS USE UPTO 80 DEGREES C |
| ASTM C 1666/C1666M : 2008 : R2015 | Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement |
| I.S. EN 16245-3:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| ISO 13931:2013 | Carbon fibre — Determination of volume resistivity |
| ISO 8516:2011 | Textile glass Textured yarns Basis for a specification |
| BS EN 13003-1:1999 | Para-aramid fibre filament yarns Designation |
| BS EN ISO 9163:2005 | Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| BS EN 13003-3:1999 | Para-aramid fibre filament yarns Technical specifications |
| BS EN 14649:2005 | Precast concrete products. Test method for strength retention of glass fibres in cement and concrete (SIC test) |
| BS EN 12654-2:1999 | Textile glass. Yarns Methods of test and general specifications |
| BS EN 1007-2:2002 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of linear density |
| BS EN 13003-2:1999 | Para-aramid fibre filament yarns Methods of test and general specifications |
| BS EN 14020-1:2002 | Reinforcements. Specification for textile glass rovings Designation |
| BS EN 14020-2:2002 | Reinforcements. Specification for textile glass rovings Methods of test and general requirements |
| ISO 10618:2004 | Carbon fibre — Determination of tensile properties of resin-impregnated yarn |
| ISO 1890:2009 | Reinforcement yarns Determination of twist |
| EN ISO 10618:2004 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004) |
| EN 15422:2008 | Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes |
| EN 14649:2005 | Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST) |
| EN 16245-3:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| EN ISO 9163:2005 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005) |
| EN 14020-2:2002 | Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
| EN ISO 13002:1998 | Carbon fibre - Designation system for filament yarns (ISO 13002:1998) |
| EN 14020-1:2002 | Reinforcements - Specification for textile glass rovings - Part 1: Designation |
| EN 14118-2:2003 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements |
| EN 2833-005:2013 | Aerospace series - Glass fibre thermosetting preimpregnates - Technical specification - Part 005: Glass fabric/phenolic resin preimpregnate |
| EN 16245-4:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics |
| BS EN 16245-4:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fabrics |
| ACI 549.3R : 2009 : R2017 | REPORT ON GLASS FIBER-REINFORCED CONCRETE PREMIX |
| BS EN 2833-005:2013 | Aerospace series. Glass fibre thermosetting preimpregnates. Technical specification Glass fabric/phenolic resin preimpregnate |
| 95/714422 DC : 0 | PREN 2833-4 - AEROSPACE SERIES - GLASS FIBER THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 4: UNIDIRECTIONAL GLASS/EPOXY RESIN PREIMPREGNATE CURING AT UP TO 125 DEGREE C FOR CONTINUOUS USE UP TO 80 DEGREE C |
| 03/109038 DC : DRAFT MAY 2003 | ISO 9163 - TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| PREN 2833-4 : 200P1 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 4: UNIDIRECTIONAL GLASS/EPOXY RESIN PREIMPREGNATE CURING AT UP TO 125 DEGREES C FOR CONTINUOUS USE UP TO 80 DEGREES C |
| EN ISO 12215-1:2000 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
| BS EN 12654-3:1999 | Textile glass. Yarns General requirements for general applications |
| BS EN 13002-2:1999 | Carbon fibre yarns Test methods and general specifications |
| BS EN ISO 13002:1999 | Carbon fibre. Designation system for filament yarns |
| BS EN ISO 1890:1997 | Reinforcement yarns. Determination of twist |
| EN 1007-2:2002 | Advanced technical ceramics - Ceramics composites - Methods of test for reinforcement - Part 2: Determination of linear density |
| EN 12654-2:1998 | Textile glass - Yarns - Part 2: Methods of test and general specifications |
| ISO 10548:2002 | Carbon fibre — Determination of size content |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 1887:2014 | Textile glass Determination of combustible-matter content |
| ISO 3344:1997 | Reinforcement products — Determination of moisture content |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.