ISO 17733:2015
Current
The latest, up-to-date edition.
Workplace air Determination of mercury and inorganic mercury compounds Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
07-12-2015
ISO 17733:2015 specifies a procedure for determination of the time-weighted average mass concentration of mercury vapour and inorganic mercury compounds in workplace air. Mercury vapour is collected on a solid sorbent using either a diffusive badge or a pumped sorbent tube. Particulate inorganic mercury compounds, if present, are collected on a quartz fibre filter. Samples are analysed using either cold vapour atomic absorption spectrometry (CVAAS) or cold vapour atomic fluorescence spectrometry (CVAFS) after acid dissolution of the mercury collected.
This International Standard is applicable to the assessment of personal exposure to mercury vapour and/or particulate inorganic mercury compounds in air for comparison with long-term or short-term exposure limits for mercury and inorganic mercury compounds and for static (area) sampling.
The lower limit of the working range of the procedure is the quantification limit. This is determined by the sampling and analysis methods selected by the user, but it is typically in the range 0,01 g to 0,04 g of mercury (see 13.1). The upper limit of the working range of the procedure is determined by the capacity of the diffusive badge, sorbent tube or filter used for sample collection, but it is at least 30 g of mercury (see 13.2). The concentration range of mercury in air for which this International Standard is applicable is determined in part by the sampling method selected by the user, but it is also dependent on the air sample volume.
The diffusive badge method is not applicable to measurements of mercury vapour when chlorine is present in the atmosphere, e.g. in chloralkali works, but chlorine does not interfere with the pumped sorbent tube method (see 13.12.1). Gaseous organomercury compounds could cause a positive interference in the measurement of mercury vapour (see 13.12.2). Similarly, particulate organomercury compounds and gaseous organomercury compounds adsorbed onto airborne particles could cause a positive interference in the measurement of particulate inorganic mercury compounds (see 13.12.3).
DevelopmentNote |
Supersedes ISO/DIS 17733. (12/2015)
|
DocumentType |
Standard
|
Pages |
54
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NF ISO 17733 : 2016 | Identical |
BS ISO 17733:2004 | Identical |
NEN ISO 17733 : 2016 | Identical |
BS ISO 17733:2015 | Identical |
ISO 20552:2007 | Workplace air — Determination of mercury vapour — Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry |
05/30124529 DC : DRAFT AUG 2005 | ISO 20552 - WORKPLACE AIR - DETERMINATION OF MERCURY VAPOUR - METHOD USING GOLD-AMALGAM COLLECTION AND ANALYSIS BY ATOMIC ABSORPTION SPECTROMETRY OR ATOMIC FLUORESCENCE SPECTROMETRY |
BS ISO 20552:2007 | Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry |
DIN ISO 13065:2017-06 | SUSTAINABILITY CRITERIA FOR BIOENERGY (ISO 13065:2015) |
DIN ISO 13065 E : 2017 | SUSTAINABILITY CRITERIA FOR BIOENERGY (ISO 13065:2015) |
BS ISO 13065:2015 | Sustainability criteria for bioenergy |
ISO 13065:2015 | Sustainability criteria for bioenergy |
ASTM E 1370 : 2014 : REDLINE | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
ASTM D 4840 : 1999 | Standard Guide for Sampling Chain-of-Custody Procedures |
ISO 7708:1995 | Air quality — Particle size fraction definitions for health-related sampling |
ISO 8655-5:2002 | Piston-operated volumetric apparatus Part 5: Dispensers |
ISO 8655-1:2002 | Piston-operated volumetric apparatus Part 1: Terminology, general requirements and user recommendations |
ISO 3585:1998 | Borosilicate glass 3.3 — Properties |
ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
EN 838:2010 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
ISO 648:2008 | Laboratory glassware — Single-volume pipettes |
EN 1076:2009 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
EN 482:2012+A1:2015 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
EN 13890:2009 | Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods |
ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
ISO 8655-2:2002 | Piston-operated volumetric apparatus Part 2: Piston pipettes |
EN 13205:2001 | Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations |
ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
EN 1540:2011 | Workplace exposure - Terminology |
ISO 16107:2007 | Workplace atmospheres Protocol for evaluating the performance of diffusive samplers |
EN 1232:1997 | Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods |
ISO 6955:1982 | Analytical spectroscopic methods Flame emission, atomic absorption, and atomic fluorescence Vocabulary |
ISO 8655-6:2002 | Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error |
ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
ISO 9169:2006 | Air quality Definition and determination of performance characteristics of an automatic measuring system |
ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.