ISO 17268:2012
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Gaseous hydrogen land vehicle refuelling connection devices
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
10-02-2020
English, French
27-11-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 17268:2012 defines the design, safety and operation characteristics of gaseous hydrogen land vehicle (GHLV) refuelling connectors consisting of, as applicable, a receptacle and a protective cap (mounted on vehicle), and a nozzle.
It applies to refuelling connectors which have working pressures of 11 MPa, 25 MPa, 35 MPa and 70 MPa, referred to as
- H11 - 11 MPa at 15 C,
- H25 - 25 MPa at 15 C,
- H35 - 35 MPa at 15 C,
- H35HF - 35 MPa at 15 C (high flow for commercial vehicle applications), and
- H70 - 70 MPa at 15 C.
Nozzles and receptacles that meet the requirements of ISO 17268:2012 will only allow GHLVs to be filled by fuelling stations dispensing hydrogen with nominal working pressures equal to or lower than the vehicle fuel system working pressure. They will not allow GHLV to be filled by fuelling stations dispensing blends of hydrogen with natural gas.
Refuelling connectors dispensing blends of hydrogen with natural gas are excluded from the scope of ISO 17268:2012.
| DevelopmentNote |
DRAFT ISO/DIS 17268 is also available for this standard. (06/2017)
|
| DocumentType |
Standard
|
| Pages |
35
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 17268 : 2017 | Identical |
| SN EN ISO 17268 : 2017 | Identical |
| DIN EN ISO 17268:2016-02 (Draft) | Identical |
| UNE-EN ISO 17268:2017 | Identical |
| NEN EN ISO 17268 : 2016 | Identical |
| PN EN ISO 17268 : 2017 | Identical |
| GOST R ISO 17268 : 2014 | Identical |
| NS EN ISO 17268 : 2016 | Identical |
| NF EN ISO 17268 : 2017 | Identical |
| I.S. EN ISO 17268:2016 | Identical |
| UNI EN ISO 17268 : 2016 COR 1 2017 | Identical |
| BS ISO 17268 : 2012 | Identical |
| NEN ISO 17268 : 2006 | Identical |
| DIN EN ISO 17268:2017-03 | Identical |
| BS EN ISO 17268:2016 | Identical |
| BS ISO 12619-1:2014 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components General requirements and definitions |
| ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
| SAE J 2601/2 : 2014 | FUELING PROTOCOL FOR GASEOUS HYDROGEN POWERED HEAVY DUTY VEHICLES |
| OVE/ONORM EN 62282-4-101 : 2015 | FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS (APU) - SAFETY OF ELECTRICALLY POWERED INDUSTRIAL TRUCKS (IEC 62282-4-101:2014) |
| 05/30134525 DC : DRAFT JUN 2005 | ISO 23273-2 - FUEL CELL ROAD VEHICLES - SAFETY SPECIFICATIONS - PART 2: PROTECTION AGAINST HYDROGEN HAZARDS FOR VEHICLES FUELLED WITH COMPRESSED HYDROGEN |
| ISO 23273-2:2006 | Fuel cell road vehicles Safety specifications Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen |
| BS ISO 16380 : 2014 | ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR |
| BS EN ISO 4126-5 : 2013 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 5: CONTROLLED SAFETY PRESSURE RELIEF SYSTEMS (CSPRS) (ISO 4126-5:2013) |
| BS ISO 23273-2:2006 | Fuel cell road vehicles. Safety specifications Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen |
| BS ISO 23273:2013 | Fuel cell road vehicles. Safety specifications. Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen |
| 17/30293124 DC : 0 | BS ISO 19880-2 - GASEOUS HYDROGEN - FUELING STATIONS - PART 2: DISPENSERS |
| CSA HGV 4.6 : 2013 | MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
| ISO/TS 20100:2008 | Gaseous hydrogen Fuelling stations |
| PREN 17127 : DRAFT 2017 | OUTDOOR HYDROGEN REFUELLING POINTS DISPENSING GASEOUS HYDROGEN AND INCOROPORATING FILLING PROTOCOLS |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| PD ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| 17/30358352 DC : 0 | BS EN 17127 - OUTDOOR HYDROGEN REFUELLING POINTS DISPENSING GASEOUS HYDROGEN AND INCOROPORATING FILLING PROTOCOLS |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| ISO 4126-5:2013 | Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| 11/30211394 DC : DRAFT MAR 2011 | BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS |
| UNE-EN ISO 4126-5:2014 | Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013) |
| SAE J 2601 : 2016 | FUELING PROTOCOLS FOR LIGHT DUTY GASEOUS HYDROGEN SURFACE VEHICLES |
| ISO 23273:2013 | Fuel cell road vehicles — Safety specifications — Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| ISO 12619-1:2014 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 1: General requirements and definitions |
| ISO 16380:2014 | Road vehicles — Blended fuels refuelling connector |
| DD ISO/TS 20100:2008 | Gaseous hydrogen. Fuelling stations |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| ISO 15501-1:2016 | Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements |
| ISO 14687-2:2012 | Hydrogen fuel Product specification Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.