ISO 16890-2:2016
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-07-2022
English, French
28-11-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 16890-2:2016 specifies the aerosol production, the test equipment and the test methods used for measuring fractional efficiency and air flow resistance of air filters for general ventilation.
It is intended for use in conjunction with ISO 16890‑1, ISO 16890‑3 and ISO 16890‑4.
The test method described in this part of ISO 16890 is applicable for air flow rates between 0,25 m3/s (900 m3/h, 530 ft3/min) and 1,5 m3/s (5 400 m3/h, 3 178 ft3/min), referring to a test rig with a nominal face area of 610 mm × 610 mm (24,0 inch × 24,0 inch).
ISO 16890 (all parts) refers to particulate air filter elements for general ventilation having an ePM1 efficiency less than or equal to 99 % and an ePM10 efficiency greater than 20 % when tested as per the procedures defined within ISO 16890 (all parts).
NOTE The lower limit for this test procedure is set at a minimum ePM10 efficiency of 20 % since it will be very difficult for a test filter element below this level to meet the statistical validity requirements of this procedure.
Air filter elements outside of this aerosol fraction are evaluated by other applicable test methods, (see ISO 29463 (all parts)).
Filter elements used in portable room-air cleaners are excluded from the scope.
The performance results obtained in accordance with ISO 16890 (all parts) cannot by themselves be quantitatively applied to predict performance in service with regard to efficiency and lifetime.
| DevelopmentNote |
Supersedes ISO/DIS 16890-2. Together with ISO 16890-1, ISO 16890-3 and ISO 16890-4, it supersedes ISO TS 21220. (12/2016)
|
| DocumentType |
Standard
|
| Pages |
59
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| IS 17570 : Part 2 : 2021 | Identical |
| ONORM EN ISO 16890-2 : 2017 | Identical |
| NF EN ISO 16890-2 : 2014 PR | Identical |
| NEN EN ISO 16890-2 : 2016 | Identical |
| NS EN ISO 16890-2 : 2016 | Identical |
| I.S. EN ISO 16890-2:2016 | Identical |
| PN EN ISO 16890-2 : 2017 | Identical |
| SN EN ISO 16890-2 : 2017 | Identical |
| UNI EN ISO 16890-2 : 2017 | Identical |
| SS-EN ISO 16890-2:2017 | Identical |
| UNE-EN ISO 16890-2:2017 | Identical |
| BS EN ISO 16890-2:2016 | Identical |
| EN ISO 16890-2:2016 | Identical |
| DIN EN ISO 16890-2:2017-08 | Identical |
| I.S. EN ISO 16890-1:2016 | AIR FILTERS FOR GENERAL VENTILATION - PART 1: TECHNICAL SPECIFICATIONS, REQUIREMENTS AND CLASSIFICATION SYSTEM BASED UPON PARTICULATE MATTER EFFICIENCY (EPM) (ISO 16890-1:2016) |
| UNE-EN ISO 16890-3:2017 | Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016) |
| I.S. EN ISO 16890-3:2016 | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
| I.S. EN ISO 16890-4:2016 | AIR FILTERS FOR GENERAL VENTILATION - PART 4: CONDITIONING METHOD TO DETERMINE THE MINIMUM FRACTIONAL TEST EFFICIENCY (ISO 16890-4:2016) |
| DIN EN ISO 16890-3:2015-08 (Draft) | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
| BS EN ISO 16890-3:2016 | Air filters for general ventilation Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured |
| DIN EN ISO 16890-1:2017-08 | AIR FILTERS FOR GENERAL VENTILATION - PART 1: TECHNICAL SPECIFICATIONS, REQUIREMENTS AND CLASSIFICATION SYSTEM BASED UPON PARTICULATE MATTER EFFICIENCY (EPM) (ISO 16890-1:2016) |
| DIN EN ISO 16890-3:2017-08 | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
| DIN EN ISO 16890-4:2017-08 | Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency (ISO 16890-4:2016) |
| 17/30345947 DC : 0 | BS EN ISO 21083-1 - TEST METHOD TO MEASURE THE EFFICIENCY OF AIR FILTRATION MEDIA AGAINST SPHERICAL NANOMATERIALS - PART 1: PARTICLE SIZE RANGE FROM 20 TO 500 NM |
| DIN EN ISO 16890-4:2015-08 (Draft) | AIR FILTERS FOR GENERAL VENTILATION - PART 4: CONDITIONING METHOD TO DETERMINE THE MINIMUM FRACTIONAL TEST EFFICIENCY (ISO 16890-4:2016) |
| UNE-EN ISO 16890-1:2017 | Air filters for general ventilation - Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) (ISO 16890-1:2016) |
| BS EN ISO 16890-1:2016 | Air filters for general ventilation Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) |
| ISO 16890-3:2016 | Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured |
| ISO 16890-4:2016 | Air filters for general ventilation — Part 4: Conditioning method to determine the minimum fractional test efficiency |
| BS EN ISO 16890-4:2016 | Air filters for general ventilation Conditioning method to determine the minimum fractional test efficiency |
| EN ISO 16890-1:2016 | Air filters for general ventilation - Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) (ISO 16890-1:2016) |
| EN ISO 16890-4:2016 | Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency (ISO 16890-4:2016) |
| EN ISO 16890-3:2016 | Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016) |
| BS ISO 29464:2017 | Cleaning of air and other gases. Terminology |
| ISO 29464:2017 | Cleaning of air and other gases — Terminology |
| UNE-EN ISO 16890-4:2017 | Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency (ISO 16890-4:2016) |
| ISO 16890-1:2016 | Air filters for general ventilation — Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) |
| ASHRAE 52.2 : 2017 | METHOD OF TESTING GENERAL VENTILATION AIR-CLEANING DEVICES FOR REMOVAL EFFICIENCY BY PARTICLE SIZE |
| ISO 2854:1976 | Statistical interpretation of data — Techniques of estimation and tests relating to means and variances |
| ISO 29464:2017 | Cleaning of air and other gases — Terminology |
| ISO 16890-3:2016 | Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured |
| ISO 16890-4:2016 | Air filters for general ventilation — Part 4: Conditioning method to determine the minimum fractional test efficiency |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| ISO 16890-1:2016 | Air filters for general ventilation — Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM) |
| ISO 14644-3:2005 | Cleanrooms and associated controlled environments Part 3: Test methods |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| ISO 21501-4:2007 | Determination of particle size distribution Single particle light interaction methods Part 4: Light scattering airborne particle counter for clean spaces |
| ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
| ISO 21501-1:2009 | Determination of particle size distribution — Single particle light interaction methods — Part 1: Light scattering aerosol spectrometer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.