ISO 1680:2013
Current
Current
The latest, up-to-date edition.
Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
02-12-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 1680:2013 specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration, and verification of the noise emission characteristics of rotating electrical machines. It specifies noise measurement methods that can be used, and specifies the operating and mounting conditions required for the test.
Noise emission characteristics include the sound power level and emission sound pressure level. The determination of these quantities is necessary: to compare the noise emitted by machines; to enable manufacturers to declare the noise emitted; for noise control purposes.
The use of ISO 1680:2013 as a noise test code ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement method used. Noise measurement methods allowed by ISO 1680:2013 are precision methods (grade 1), engineering methods (grade 2) and survey methods (grade 3). Methods of engineering grade (grade 2) are preferred.
ISO 1680:2013 is applicable to rotating electrical machines of any length, width or height.
| Committee |
ISO/TC 43/SC 1
|
| DevelopmentNote |
Supersedes ISO 1680-1 and ISO 1680-2. (11/1999) Supersedes ISO/FDIS 1680. (12/2013)
|
| DocumentType |
Standard
|
| Pages |
17
|
| ProductNote |
This standard also has an Corrected version (fr) : 2014-02.
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN ISO 1680:2001 | Identical |
| GOST R ISO 1680 : 2012 | Identical |
| NF EN ISO 1680 : 2014 | Identical |
| NBN EN ISO 1680 : 2014 | Identical |
| NEN EN ISO 1680 : 2014 | Identical |
| NS EN ISO 1680 : 2013 | Identical |
| I.S. EN ISO 1680:2013 | Identical |
| PN EN ISO 1680 : 2014 | Identical |
| SN EN ISO 1680:2014 | Identical |
| UNI EN ISO 1680 : 2014 | Identical |
| BS EN ISO 1680:2013 | Identical |
| EN ISO 1680:2013 | Identical |
| DIN EN ISO 1680:2014-04 | Identical |
| IS 12998 : 2024 | Identical |
| UNE-EN ISO 1680:2014 | Identical |
| DIN V ENV 60349-2 : 1994 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| UNE-EN 14985:2012 | Cranes - Slewing jib cranes |
| NF EN 62006 : 2011 | HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
| I.S. EN 14985:2012 | CRANES - SLEWING JIB CRANES |
| I.S. EN 12583:2014 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| 12/30258747 DC : DRAFT MAR 2012 | BS EN 12583 - GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| 07/30161753 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| BS EN 61800-4:2003 | Adjustable speed electrical power drive systems General requirements. Rating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV |
| ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
| IEC 62006:2010 | Hydraulic machines - Acceptance tests of small hydroelectric installations |
| DIN EN 12583:2000-11 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| UNE-EN 62006:2011 | Hydraulic machines - Acceptance tests of small hydroelectric installations |
| 04/30058509 DC : DRAFT JUNE 2004 | BS EN 14985 - CRANES - SLEWING JIB CRANES |
| EN 62006:2011 | Hydraulic machines - Acceptance tests of small hydroelectric installations |
| DIN EN 12583:2014-07 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| IEC 61800-4:2002 | Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV |
| UNI EN 14985 : 2012 | CRANES - SLEWING JIB CRANES |
| UNI EN 12583 : 2014 | GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS |
| BS 4999-109:1987 | General requirements for rotating electrical machines Specification for noise levels, including test methods |
| CEI EN 62006 : 2011 | HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
| I.S. EN 62006:2011 | HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
| DIN EN 14985:2012-05 | Cranes - Slewing jib cranes |
| BS EN 12583:2014 | Gas Infrastructure. Compressor stations. Functional requirements |
| BS EN 14985:2012 | Cranes. Slewing jib cranes |
| UNE-EN 12583:2014 | Gas Infrastructure - Compressor stations - Functional requirements |
| EN 14985:2012 | Cranes - Slewing jib cranes |
| BS EN 62006:2011 | Hydraulic machines. Acceptance tests of small hydroelectric installations |
| CEI EN 61800-4 : 2003 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A/C/ POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV |
| I.S. EN 61800-4:2003 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A.C. POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| EN 12583:2014 | Gas Infrastructure - Compressor stations - Functional requirements |
| EN 61800-4:2003 | Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV |
| PIP ELSMT01G : 2013 | IEC AC SQUIRREL CAGE INDUCTION MOTOR SPECIFICATION (1000 VOLTS AND BELOW) |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 12001:1996 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| IEC 60034-9:2003+AMD1:2007 CSV | Rotating electrical machines - Part 9: Noise limits |
| ISO 3743-2:1994 | Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms |
| ISO 7574-4:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| IEC 61043:1993 | Electroacoustics - Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones |
| ISO 3747:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment |
| ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| ISO 80000-8:2007 | Quantities and units Part 8: Acoustics |
| ISO 11205:2003 | Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| ISO 9614-3:2002 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| ISO 7779:2010 | Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.