ISO 16571:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Systems for evacuation of plume generated by medical devices
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
28-03-2024
English
11-03-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 16571:2014 specifies requirements and guidelines for the design, manufacture, installation, function, performance, maintenance, servicing, documentation, testing, and commissioning of equipment for evacuation of plume generated by medical devices.
ISO 16571:2014 is applicable to
a) portable and mobile plume evacuation systems,
b) local stationary plume evacuation systems,
c) dedicated central pipeline systems for plume evacuation systems, and
d) plume evacuation systems integrated into other equipment (e.g. laser equipment).
| Committee |
ISO/TC 121/SC 6
|
| DevelopmentNote |
Supersedes ISO/DIS 16571. (03/2014)
|
| DocumentType |
Standard
|
| Pages |
36
|
| ProductNote |
THIS STANDARD ALSO REFERS TO IEC 60601-6-08
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| UnderRevision |
| Standards | Relationship |
| NEN ISO 16571 : 2014 | Identical |
| BS ISO 16571:2014 | Identical |
| CAN/CSA-ISO 16571:16 | Identical |
| UNE-EN ISO 11197:2016 | Medical supply units (ISO 11197:2016) |
| ISO 11197:2016 | Medical supply units |
| NF EN ISO 11197 : 2016 | MEDICAL SUPPLY UNITS |
| EN ISO 11197:2016 | Medical supply units (ISO 11197:2016) |
| BS ISO 11197 : 2016 | MEDICAL SUPPLY UNITS |
| I.S. EN ISO 11197:2016 | MEDICAL SUPPLY UNITS (ISO 11197:2016) |
| CSA Z305.13 : 2013(R2018) | PLUME SCAVENGING IN SURGICAL, DIAGNOSTIC, THERAPEUTIC, AND AESTHETIC SETTINGS |
| CSA Z317.2 : 2010 | SPECIAL REQUIREMENTS FOR HEATING, VENTILATION, AND AIR-CONDITIONING (HVAC) SYSTEMS IN HEALTH CARE FACILITIES |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| Z7396.1-17 | Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
| IEC 60601-1-8:2006+AMD1:2012 CSV | Medical electrical equipment - Part 1-8: General requirements forbasic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems inmedical electrical equipment and medical electrical systems |
| ISO 7396-2:2007 | Medical gas pipeline systems Part 2: Anaesthetic gas scavenging disposal systems |
| IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
| CSA Z7396.2 : 2002 | MEDICAL GAS PIPELINE SYSTEMS - PART 2: ANAESTHETIC GAS SCAVENGING DISPOSAL SYSTEMS |
| ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
| EN 1041:2008+A1:2013 | Information supplied by the manufacturer of medical devices |
| CSA Z386:2014(R2019) | SAFE USE OF LASERS IN HEALTH CARE |
| ISO 11197:2016 | Medical supply units |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ANSI Z136.3 : 2011 | SAFE USE OF LASERS IN HEALTH CARE |
| NFPA 115 : 2016 | LASER FIRE PROTECTION |
| ISO 80369-1:2010 | Small-bore connectors for liquids and gases in healthcare applications Part 1: General requirements |
| C22.1HB-15 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
| EN 1822-1:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| EN 13348:2016 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.