ISO 15510:2014
Current
Current
The latest, up-to-date edition.
Stainless steels — Chemical composition
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, Russian
Published date
20-05-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 15510:2014 lists the chemical compositions of stainless steels agreed by ISO/TC 17/SC 4, mainly on the basis of a composition of the specifications in existing ISO, ASTM, EN, JIS, and GB (Chinese) standards. They apply to all wrought product forms including ingots and semi-finished material.
| Committee |
ISO/TC 17/SC 4
|
| DevelopmentNote |
Supersedes ISO TS 15510. (12/2010) Supersedes ISO/DIS 15510. (05/2014)
|
| DocumentType |
Standard
|
| Pages |
61
|
| ProductNote |
JIS G4305.JIS G4304,GB/T20878/2007 ALSO REFERS THIS STNDARD
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-ISO 15510 : 2015 | Identical |
| NEN ISO 15510 : 2014 | Identical |
| BS ISO 15510:2014 | Identical |
| DIN EN ISO 15156-3:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
| BS EN ISO 13504:2012 | Dentistry. General requirements for instruments and related accessories used in dental implant placement and treatment |
| 12/30250149 DC : 0 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 15/30296386 DC : 0 | BS EN ISO 9626 - STAINLESS STEEL NEEDLE TUBING FOR THE MANUFACTURE OF MEDICAL DEVICES - REQUIREMENTS AND TEST METHODS |
| 17/30357486 DC : 0 | BS EN ISO 15747 - PLASTIC CONTAINERS FOR INTRAVENOUS INJECTIONS |
| 15/30316161 DC : 0 | BS ISO 6931-1 - STAINLESS STEELS FOR SPRINGS - PART 1: WIRE |
| 12/30251283 DC : 0 | BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA |
| BS ISO 9631:2018 | Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material |
| ISO 9328-1:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements |
| UNE-EN ISO 16635-2:2015 | Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014) |
| DIN EN ISO 11114-1:2012-07 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012 + AMD.1:2017) |
| BS EN ISO 3452-3:2013 | Non-destructive testing. Penetrant testing Reference test blocks |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| DIN ISO 8536-6:2017-09 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES (ISO 8536-6:2016) |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| UNI EN ISO 16635-2 : 2014 | DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS |
| BS EN ISO 16635-2:2014 | Dentistry. Dental rubber dam instruments Clamp forceps |
| 12/30245297 DC : 0 | BS EN ISO 16635-2 - DENTISTRY - RUBBER DAM TECHNIQUE - PART 2: RUBBER DAM CLAMP FORCEPS |
| DIN ISO 8536-6:2012-09 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES (ISO 8536-6:2016) |
| DIN EN ISO 16635-1 E : 2014 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| UNE-EN ISO 13504:2013 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
| 18/30364236 DC : 0 | BS ISO 1835 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - MEDIUM TOLERANCE SLING CHAINS - GRADE 4, STAINLESS STEEL |
| BS ISO 16143-1:2014 | Stainless steels for general purposes Corrosion-resistant flat products |
| BS ISO 16635-1 : 2013 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH |
| 11/30212235 DC : 0 | BS EN ISO 13504 - DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
| UNI EN ISO 16635-1 : 2014 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH |
| PREN 10088-2 : DRAFT 2011 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 12/30250146 DC : 0 | BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
| ISO 16143-1:2014 | Stainless steels for general purposes — Part 1: Corrosion-resistant flat products |
| I.S. EN ISO 16635-2:2014 | DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014) |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| DIN EN ISO 7441:2015-04 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS (ISO 7441:2015) |
| DIN EN ISO 3452-3:2014-03 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
| I.S. EN ISO 11114-1:2012 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012) |
| I.S. EN ISO 7441:2015 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS (ISO 7441:2015) |
| I.S. EN ISO 9626:2016 | STAINLESS STEEL NEEDLE TUBING FOR THE MANUFACTURE OF MEDICAL DEVICES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 10088-1:2014-12 | Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2014 |
| DIN EN 10088-2:2014-12 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN ISO 3452-3:2013 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
| I.S. EN 10088-1:2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| I.S. EN ISO 11608-2:2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 2: NEEDLES (ISO 11608-2:2012) |
| I.S. EN 10088-3:2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| EN ISO 15156-3:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) |
| DIN EN 10088-3:2014-12 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 15/30296029 DC : 0 | BS ISO 4955 - HEAT-RESISTANT STEELS |
| BS ISO 17218:2014 | Sterile acupuncture needles for single use |
| DIN EN ISO 16635-1:2014-09 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| 18/30351048 DC : 0 | BS ISO 3506-6 - MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 6: GUIDANCE FOR THE SELECTION OF STAINLESS STEELS AND NICKEL ALLOYS FOR FASTENERS |
| 16/30299127 DC : DRAFT MAR 2016 | BS EN ISO 13769 - GAS CYLINDERS - STAMP MARKING |
| BS ISO 16143-3:2014 | Stainless steels for general purposes Wire |
| 12/30250152 DC : 0 | BS ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| 11/30254171 DC : 0 | BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 12/30245294 DC : 0 | BS ISO 16635-1 - DENTISTRY - DENTAL DAM TECHNIQUE - PART 1: HOLE PUNCH |
| ISO 18418-2:2014 | Gasoline engines — Medium pressure liquid fuel supply connections — Part 2: Pipe assemblies |
| I.S. EN ISO 16635-1:2014 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| I.S. EN ISO 13504:2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
| UNE-EN ISO 16635-1:2014 | Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013) |
| I.S. EN ISO 13918:2018 | WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING (ISO 13918:2017) |
| ISO 17218:2014 | Sterile acupuncture needles for single use |
| ISO 13271:2012 | Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors |
| EN ISO 13918:2018 | Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05) |
| ISO 9809-4:2014 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa |
| ISO 9631:2018 | Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material |
| ISO 6931-1:2016 | Stainless steels for springs Part 1: Wire |
| IEC 60309-5:2017 | Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC) |
| UNE-EN 10088-2:2015 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| ISO 8536-6:2016 | Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles |
| UNE-EN ISO 9626:2017 | Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods (ISO 9626:2016) |
| BS EN ISO 9626:2016 | Stainless steel needle tubing for the manufacture of medical devices. Requirements and test methods |
| ISO 16635-1:2013 | Dentistry — Dental rubber dam technique — Part 1: Hole punch |
| ISO 9626:2016 | Stainless steel needle tubing for the manufacture of medical devices — Requirements and test methods |
| UNE-EN 10088-3:2015 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN ISO 16635-1:2014 | Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013) |
| EN ISO 3452-3:2013 | Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013) |
| EN ISO 7441:2015 | Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015) |
| UNI EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN ISO 11608-2 : 2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 2: NEEDLES |
| UNI EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 10088-1 : 2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| DIN EN ISO 13504:2012-10 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
| 15/30282343 DC : 0 | BS ISO 18746 - TRADITIONAL CHINESE MEDICINE - INTRADERMAL ACUPUNCTURE NEEDLES |
| ISO 13918:2017 | Welding — Studs and ceramic ferrules for arc stud welding |
| BS ISO 16143-2:2014 | Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
| 13/30259011 DC : 0 | BS ISO 17218 - STERILE ACUPUNCTURE NEEDLES FOR SINGLE USE |
| BS ISO 18418-2:2014 | Gasoline engines. Medium pressure liquid fuel supply connections Pipe assemblies |
| UNI EN ISO 13504 : 2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
| 11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| BS EN ISO 15156-3:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| 16/30342991 DC : 0 | BS EN ISO 13918 - WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING |
| BS ISO 9809-4:2014 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Stainless steel cylinders with an Rm value of less than 1 100 MPa |
| ISO 16143-2:2014 | Stainless steels for general purposes — Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
| ISO 4955:2016 | Heat-resistant steels |
| ISO 13504:2012 | Dentistry — General requirements for instruments and related accessories used in dental implant placement and treatment |
| BS EN ISO 11608-2:2012 | Needle-based injection systems for medical use. Requirements and test methods Needles |
| ISO 15156-3:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| BS EN ISO 11114-1 : 2012 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012) |
| ISO 16635-2:2014 | Dentistry Dental rubber dam instruments Part 2: Clamp forceps |
| BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| DIN EN ISO 11608-2:2012-12 | Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO 11608-2:2012) |
| BS EN ISO 7441:2015 | Corrosion of metals and alloys. Determination of bimetallic corrosion in atmospheric exposure corrosion tests |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 7441:2015 | Corrosion of metals and alloys Determination of bimetallic corrosion in atmospheric exposure corrosion tests |
| ISO 3452-3:2013 | Non-destructive testing — Penetrant testing — Part 3: Reference test blocks |
| ISO 11608-2:2012 | Needle-based injection systems for medical use Requirements and test methods Part 2: Needles |
| EN ISO 11608-2:2012 | Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO 11608-2:2012) |
| EN ISO 16635-2:2014 | Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014) |
| EN ISO 9626:2016 | Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods (ISO 9626:2016) |
| EN ISO 13504:2012 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
| BS EN ISO 16635-1:2014 | Dentistry. Dental rubber dam technique Hole punch |
| 17/30346747 DC : 0 | BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
| BS ISO 8536-6:2016 | Infusion equipment for medical use Freeze drying closures for infusion bottles |
| ISO 18746:2016 | Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use |
| PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 11/30254165 DC : 0 | BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| BS ISO 13271:2012 | Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors |
| ISO 9328-7:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels |
| I.S. EN ISO 15156-3:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
| PREN 10088-1 : DRAFT 2011 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| ISO 16143-3:2014 | Stainless steels for general purposes — Part 3: Wire |
| UNE-EN 10088-1:2015 | Stainless steels - Part 1: List of stainless steels |
| UNE-EN ISO 7441:2015 | Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015) |
| BS EN 10088-1:2014 | Stainless steels List of stainless steels |
| UNI EN ISO 3452-3 : 2014 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS |
| NS-EN 10088-3:2023 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes |
| AS/NZS ISO 13918:2020 | Welding - Studs and ceramic ferrules for arc stud welding |
| ISO 6929:2013 | Steel products — Vocabulary |
| ISO/TS 4949:2016 | Steel names based on letter symbols |
| ISO 16143-3:2014 | Stainless steels for general purposes — Part 3: Wire |
| ISO 16143-2:2014 | Stainless steels for general purposes — Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
| ASTM A 959 : 2016 : REDLINE | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| ISO 6931-2:2005 | Stainless steels for springs Part 2: Narrow strip |
| ISO 16143-1:2014 | Stainless steels for general purposes — Part 1: Corrosion-resistant flat products |
| ASTM E 527 : 2016 : REDLINE | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ISO 4955:2016 | Heat-resistant steels |
| ISO 9327-5:1999 | Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 5: Stainless steels |
| ISO 9328-7:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 7: Stainless steels |
| SAC GB/T 20878 : 2007 | STAINLESS AND HEAT-RESISTING STEELS - DESIGNATION AND CHEMICAL COMPOSITION |
| AS ISO 3452.3:2020 | Non-destructive testing - Penetrant testing Reference test blocks |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| ISO 6931-1:2016 | Stainless steels for springs Part 1: Wire |
| ISO 4954:1993 | Steels for cold heading and cold extruding |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.