ISO 15186-3:2002
Current
The latest, up-to-date edition.
Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 3: Laboratory measurements at low frequencies
PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy
English, French
01-11-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 15186-3:2002 specifies a sound intensity method to determine the sound reduction index and the element-normalized level difference of building elements at low frequencies. This method has significantly better reproducibility in a typical test facility than those of ISO 140-3, ISO 140-10 and ISO 15186-1. The results are more independent of the room dimensions of the laboratory and closer to values that would be measured between rooms of volume greater than 300 m3. ISO 15186-3 is applicable in the frequency range 50 Hz to 160 Hz but is mainly intended for the frequency range 50 Hz to 80 Hz.
NOTE For elements faced with thick, porous absorbers, the recommended frequency range is 50 Hz to 80 Hz.
The main differences between the methods of ISO 15186-1 and ISO 15186-3 are that in ISO 15186-3
- the sound pressure level of the source room is measured close to the surface of the test specimen, and
- the surface opposite the test specimen in the receiving room is highly absorbing and converts the room acoustically into a duct with several propagating cross-modes above the lowest cut-on frequency.
The results found by the method of ISO 15186-3 can be combined with those of ISO 140-3 and ISO 15186-1 to produce data in the frequency range 50 Hz to 5 000 Hz.
The reproducibility of this intensity method is, for all frequencies, estimated to be equal to or better than that found with the method of ISO 140-3 at 100 Hz.
Some comparisons of data obtained with this part of ISO 15186 and with ISO 140-3 are given for information.
| DevelopmentNote |
Supersedes ISO/DIS 15186-3 (11/2002)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 15186-3 : 2011 | Identical |
| NBN EN ISO 15186-3 : 2010 | Identical |
| NEN ISO 15186-3 : 2002 | Identical |
| NEN EN ISO 15186-3 : 2010 | Identical |
| NS EN ISO 15186-3 : 1ED 2010 | Identical |
| I.S. EN ISO 15186-3:2010 | Identical |
| PN EN ISO 15186-3 : 2011 | Identical |
| SAC GB/T 31004-3 : 2014 | Identical |
| SN EN ISO 15186-3 : 2010 | Identical |
| UNI EN ISO 15186-3 : 2010 | Identical |
| SS-EN ISO 15186-3:2010 | Identical |
| UNE-EN ISO 15186-3:2011 | Identical |
| BS EN ISO 15186-3:2010 | Identical |
| EN ISO 15186-3:2010 | Identical |
| DIN EN ISO 15186-3:2010-12 | Identical |
| BS ISO 15186-3 : 2002 | Identical |
| UNI EN ISO 10140-2 : 2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 2: MEASUREMENT OF AIRBORNE SOUND INSULATION |
| PD CEN/TR 15226:2006 | Building products. Treatment of acoustics in product technical specifications |
| I.S. CEN/TR 15226:2006 | BUILDING PRODUCTS - TREATMENT OF ACOUSTICS IN PRODUCT TECHNICAL SPECIFICATIONS |
| CEN/TR 15226:2006 | Building products - Treatment of acoustics in product technical specifications |
| BS EN ISO 10140-2:2010 | Acoustics. Laboratory measurement of sound insulation of building elements Measurement of airborne sound insulation |
| 16/30334494 DC : 0 | BS EN ISO 12354-1 - BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS |
| 08/30087646 DC : 0 | ISO 10140-2 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 2: MEASUREMENT OF AIRBORNE SOUND INSULATION |
| ISO 12354-1:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between rooms |
| I.S. EN ISO 10140-2:2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 2: MEASUREMENT OF AIRBORNE SOUND INSULATION |
| EN ISO 12354-1:2017 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO 12354-1:2017) |
| DIN EN ISO 12354-1:2016-03 (Draft) | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS (ISO 12354-1:2017) |
| I.S. EN ISO 12354-1:2017 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS (ISO 12354-1:2017) |
| UNI TR 11326 : 2009 | Acoustics - Evaluation of the uncertainty of measurements and calculations in acoustics - Parte 1: General concepts |
| ISO 10140-2:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
| DIN EN ISO 10140-2:2010-12 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
| UNE-EN ISO 10140-2:2011 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
| EN ISO 10140-2:2010 | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation (ISO 10140-2:2010) |
| BS EN ISO 12354-1:2017 | Building acoustics. Estimation of acoustic performance of buildings from the performance of elements Airborne sound insulation between rooms |
| ISO 140-10:1991 | Acoustics Measurement of sound insulation in buildings and of building elements Part 10: Laboratory measurement of airborne sound insulation of small building elements |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| IEC 61043:1993 | Electroacoustics - Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones |
| ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| ISO 140-1:1997 | Acoustics Measurement of sound insulation in buildings and of building elements Part 1: Requirements for laboratory test facilities with suppressed flanking transmission |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| ISO 15186-1:2000 | Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 1: Laboratory measurements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.