ISO 14694:2003
Current
Current
The latest, up-to-date edition.
Industrial fans — Specifications for balance quality and vibration levels
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
14-04-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 14694:2003 gives specifications for vibration and balance limits of fans for all applications except those designed solely for air circulation, for example, ceiling fans and table fans. However, it is limited to fans of all types installed with a power of less than 300 kW or to commercially available standard electric motor with a maximum power of 355 kW (following an R20 series). For fans of greater power than this, the applicable limits are those given in ISO 10816 - 3. Where the fans in an installation have varying powers both above and below 300 kW, and have been the subject of a single contract, then the manufacturer and purchaser shall agree on the appropriate standard to be used. This should normally be based on the majority of units.
Fan-equipment foundations and installation practices are beyond the scope of ISO 14694:2003. Foundation design and fan installation are not normally the responsibilities of the fan manufacturer. It is fully expected that the foundations upon which the fan is mounted will provide the support and stability necessary to meet the vibration criteria of the fan as it is delivered from the factory.
ISO 14694:2003 is intended to cover only the balance or vibration of the fan and does not take into account the effect of fan vibration on personnel, equipment or processes.
| Committee |
ISO/TC 117
|
| DevelopmentNote |
Supersedes ISO/DIS 14694 (04/2003)
|
| DocumentType |
Standard
|
| Pages |
42
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ISO 13347
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| BS ISO 14694 : 2003 | Identical |
| NEN ISO 14694 : 2003 AMD 1 2010 | Identical |
| NF ISO 14694 : 2003 AMD 1 2011 | Identical |
| DIN EN ISO 13350:2016-02 | FANS - PERFORMANCE TESTING OF JET FANS (ISO 13350:2015) |
| 16/30341593 DC : 0 | BS ISO 10816-3 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU |
| BS EN ISO 13350:2015 | Fans. Performance testing of jet fans |
| 14/30271543 DC : 0 | BS EN ISO 13350 - INDUSTRIAL FANS - PERFORMANCE TESTING OF JET FANS |
| 17/30356593 DC : 0 | BS EN ISO 15138 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| UNE-EN ISO 13350:2016 | Fans - Performance testing of jet fans (ISO 13350:2015) |
| BS ISO 13380:2002 | Condition monitoring and diagnostics of machines. General guidelines on using performance parameters |
| 04/30115503 DC : DRAFT JUN 2004 | EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| I.S. EN ISO 13349:2010 | FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES |
| UNI EN ISO 15138 : 2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| UNI ISO 10816-3 : 2012 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU |
| 08/30183749 DC : 0 | BS EN ISO 13349 - FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES |
| BS 7854-3:1998 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ |
| BS ISO 21940-11:2016 | Mechanical vibration. Rotor balancing Procedures and tolerances for rotors with rigid behaviour |
| 17/30341578 DC : DRAFT MAY 2017 | BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
| 15/30290331 DC : 0 | BS ISO 21940-11 - MECHANICAL VIBRATION - ROTOR BALANCING - PART 11: PROCEDURES AND TOLERANCES FOR ROTORS WITH RIGID BEHAVIOUR |
| BS ISO 20816-1:2016 | Mechanical vibration. Measurement and evaluation of machine vibration General guidelines |
| BS ISO 1940-1:2003 | Mechanical vibration. Balance quality requirements for rotors in a constant (rigid) state Specification and verification of balance tolerances |
| BS EN ISO 15138:2007 | Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning |
| PREN 14986 : DRAFT 2014 | DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| BS ISO 10816-3 : 2009 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU |
| I.S. EN 50216-12:2011 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS |
| UNE-EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| EN 50216-12:2011 | Power transformer and reactor fittings - Part 12: Fans |
| I.S. EN 14986:2017 | DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| BS 848-9:2007 | Fans for general purposes. Tolerances, methods of conversion and technical data presentation |
| BS 848-6(2003) : 2003 | FANS FOR GENERAL PURPOSES - METHOD OF MEASUREMENT OF FAN VIBRATION |
| UNE-EN ISO 13349:2011 | Fans - Vocabulary and definitions of categories (ISO 13349:2010) |
| BS 848-9:2006 | Fans for general purposes Tolerances, methods of conversion and technical data presentation |
| UNI ISO 13380 : 2010 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES ON USING PERFORMANCE PARAMETERS |
| I.S. EN ISO 15138:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| DIN ISO 17359:2011-09 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
| UNI EN ISO 13349 : 2011 | FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES |
| DIN ISO 1940-1:2004-04 | MECHANICAL VIBRATION - BALANCE QUALITY REQUIREMENTS FOR ROTORS IN A CONSTANT (RIGID) STATE - PART 1: SPECIFICATION AND VERIFICATION OF BALANCE TOLERANCES |
| PD ISO/TR 19201:2013 | Mechanical vibration. Methodology for selecting appropriate machinery vibration standards |
| 14/30294092 DC : 0 | BS EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| DIN ISO 20816-1:2015-12 (Draft) | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 1: GENERAL GUIDELINES (ISO 20816-1:2016) |
| DIN ISO 21940-11:2016-01 (Draft) | MECHANICAL VIBRATION - ROTOR BALANCING - PART 11: PROCEDURES AND TOLERANCES FOR ROTORS WITH RIGID BEHAVIOUR (ISO 21940-11:2016) |
| NF ISO 14695 : 2003 | INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION |
| BS EN ISO 13349:2010 | Fans — Vocabulary and definitions of categories (ISO 13349:2010) |
| CEI UNI EN 45510-4-3 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-3: BOILER AUXILIARIES - DRAUGHT PLANT |
| BS ISO 13373-1:2002 | Condition monitoring and diagnostics of machines. Vibration condition monitoring General procedures |
| 10/30200372 DC : 0 | BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
| 06/30127203 DC : DRAFT OCT 2006 | ISO 15138 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR CONDITIONING |
| PREN ISO 13349 : DRAFT 2008 | FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES |
| 15/30328956 DC : 0 | BS ISO 20816-1 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 1: GENERAL GUIDELINES |
| 05/30127567 DC : DRAFT JAN 2005 | ISO 20283-3 - MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 3: PRE-INSTALLATION VIBRATORY NOISE MEASUREMENT OF SHIPBOARD EQUIPMENT |
| ISO 21940-11:2016 | Mechanical vibration Rotor balancing Part 11: Procedures and tolerances for rotors with rigid behaviour |
| BS ISO 14695:2003 | Industrial fans. Method of measurement of fan vibration |
| ISO 15138:2007 | Petroleum and natural gas industries Offshore production installations Heating, ventilation and air-conditioning |
| EN ISO 15138:2007 | Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007) |
| ISO 14695:2003 | Industrial fans — Method of measurement of fan vibration |
| ISO 13349:2010 | Fans — Vocabulary and definitions of categories |
| BS EN 14986:2007 | Design of fans working in potentially explosive atmospheres |
| UNE-EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| BS EN 45510-4-3:1999 | Guide for the procurement of power station equipment. Boiler auxiliaries Draught plant - Draught plant |
| EN 14986:2017 | Design of fans working in potentially explosive atmospheres |
| EN ISO 13349:2010 | Fans - Vocabulary and definitions of categories (ISO 13349:2010) |
| EN ISO 13350:2015 | Fans - Performance testing of jet fans (ISO 13350:2015) |
| BS ISO 20283-3 : 2006 | MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 3: PRE-INSTALLATION VIBRATION MEASUREMENT OF SHIPBOARD EQUIPMENT |
| ISO 20283-3:2006 | Mechanical vibration Measurement of vibration on ships Part 3: Pre-installation vibration measurement of shipboard equipment |
| BS EN 50216-12:2011 | Power transformer and reactor fittings Fans |
| 00/713944 DC : DRAFT SEP 2000 | ISO/DIS 14695 - INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION |
| 01/716227 DC : DRAFT DEC 2001 | BS ISO 1940-1 - MECHANICAL VIBRATION - BALANCE QUALITY REQUIREMENTS FOR ROTORS IN A CONSTANT (RIGID) STATE - PART 1: DETERMINATION AND VERIFICATION OF BALANCE TOLERANCES |
| DIN EN ISO 13349:2012-07 | Fans - Vocabulary and definitions of categories (ISO 13349:2010) |
| ISO 13348:2007 | Industrial fans — Tolerances, methods of conversion and technical data presentation |
| I.S. EN ISO 13350:2015 | FANS - PERFORMANCE TESTING OF JET FANS (ISO 13350:2015) |
| ISO 13350:2015 | Fans — Performance testing of jet fans |
| ISO 13380:2002 | Condition monitoring and diagnostics of machines General guidelines on using performance parameters |
| ISO 17359:2018 | Condition monitoring and diagnostics of machines — General guidelines |
| ISO/TR 19201:2013 | Mechanical vibration — Methodology for selecting appropriate machinery vibration standards |
| ISO 13373-1:2002 | Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| ISO 12499:1999 | Industrial fans Mechanical safety of fans Guarding |
| ISO 5802:2001 | Industrial fans — Performance testing in situ |
| ISO 13348:2007 | Industrial fans — Tolerances, methods of conversion and technical data presentation |
| ISO 2953:1999 | Mechanical vibration Balancing machines Description and evaluation |
| ISO 7919-1:1996 | Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines |
| AMCA 202 : 2017 | TROUBLESHOOTING |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| ISO 13351:2009 | Fans — Dimensions |
| ISO 13350:2015 | Fans — Performance testing of jet fans |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| ISO 14695:2003 | Industrial fans — Method of measurement of fan vibration |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 8821:1989 | Mechanical vibration Balancing Shaft and fitment key convention |
| ISO 1925:2001 | Mechanical vibration Balancing Vocabulary |
| AMCA 204 : 2005(R2012) | BALANCE QUALITY AND VIBRATION LEVELS FOR FANS |
| IEC 60034-14:2003+AMD1:2007 CSV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| ISO 10816-1:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines |
| ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| ISO 4863:1984 | Resilient shaft couplings — Information to be supplied by users and manufacturers |
| ISO 254:2011 | Belt drives — Pulleys — Quality, finish and balance |
| ISO 13349:2010 | Fans — Vocabulary and definitions of categories |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.