ISO 14373:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
22-01-2024
Superseded by
Language(s)
French, English
Published date
13-03-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 14373:2015 specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel, comprising two or three sheets of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm, for the following materials: uncoated steels; hot-dip zinc or iron-zinc alloy (galvannealed) coated steel; electrolytic zinc, zinc-iron, or zinc-nickel coated steel; aluminium coated steel; zinc-aluminium coated steel. It is applicable to welding of sheets of the same or dissimilar thickness, where the thickness ratio is less than or equal to 3:1. It applies to the welding of three thicknesses, where the total thickness is less than or equal to 9 mm.
Welding with the following types of equipment is within its scope: pedestal welding equipment; gun welders; automatic welding equipment where the components are fed by robots or automatic feeding equipment; multi welders; robotic welders. It also gives information, for guidance only, on appropriate welding equipment on spot welding conditions.
The welding of organic coated or primer coated steels is not within its scope.
| Committee |
ISO/TC 44/SC 6
|
| DevelopmentNote |
Supersedes ISO/DIS 14373. (03/2015)
|
| DocumentType |
Standard
|
| Pages |
17
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ISO 18272-2
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| UNE-EN ISO 14373:2015 | Identical |
| NF EN ISO 14373 : 2015 | Identical |
| NBN EN ISO 14373 : 2015 | Identical |
| NEN EN ISO 14373 : 2015 | Identical |
| NS EN ISO 14373 : 2015 | Identical |
| I.S. EN ISO 14373:2015 | Identical |
| PN EN ISO 14373 : 2015 | Identical |
| SN EN ISO 14373:2015 | Identical |
| UNI EN ISO 14373 : 2008 | Identical |
| SS-EN ISO 14373:2015 | Identical |
| UNI EN ISO 14373:2015 | Identical |
| BS EN ISO 14373:2015 | Identical |
| EN ISO 14373:2015 | Identical |
| DIN EN ISO 14373:2015-06 | Identical |
| DS EN ISO 14373 : 2015 | Identical |
| ONORM EN ISO 14373 : 2015 | Identical |
| NEN ISO 14373 : 2006 | Identical |
| 13/30284265 DC : 0 | BS EN ISO 18278-1 - RESISTANCE WELDING - WELDABILITY - PART 1: ASSESSMENT OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS |
| DIN ISO 16338:2014-08 | WELDING FOR AEROSPACE APPLICATIONS - RESISTANCE SPOT AND SEAM WELDING (ISO 16338:2017) |
| DD CEN ISO/TS 15011-5:2006 | Health and safety in welding and allied processes. Laboratory method for sampling fume and gases Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials |
| UNE-EN ISO 18278-3:2018 | Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot weld bonding (ISO 18278-3:2017) |
| DIN EN ISO 18278-1:2015-08 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
| BS EN ISO 18278-2:2016 | Resistance welding. Weldability Evaluation procedures for weldability in spot welding |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 14/30284268 DC : 0 | BS EN ISO 18278-2 - RESISTANCE WELDING - WELDABILITY - PART 2: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELDING |
| 16/30339325 DC : 0 | BS EN ISO 18278-3 - RESISTANCE WELDING - WELDABILITY - PART 3: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELD BONDING |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| I.S. CEN ISO TS 15011-5:2006 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 5: IDENTIFICATION OF THERMAL-DEGRADATION PRODUCTS GENERATED WHEN WELDING OR CUTTING THROUGH PRODUCTS COMPOSED WHOLLY OR PARTLY OF ORGANIC MATERIALS |
| ISO 16338:2017 | Welding for aerospace applications — Resistance spot and seam welding |
| EN ISO 18278-3:2017 | Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot weld bonding (ISO 18278-3:2017) |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ISO/TS 15011-5:2006 | Health and safety in welding and allied processes Laboratory method for sampling fume and gases Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials |
| I.S. EN ISO 18278-2:2016 | RESISTANCE WELDING - WELDABILITY - PART 2: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELDING (ISO 18278-2:2016) |
| I.S. EN ISO 18595:2007 | RESISTANCE WELDING - SPOT WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - WELDABILITY, WELDING AND TESTING |
| EN ISO 18595:2007 | Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing (ISO 18595:2007) |
| I.S. EN ISO 18278-1:2015 | RESISTANCE WELDING - WELDABILITY - PART 1: GENERAL REQUIREMENTS FOR THE EVALUATION OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS (ISO 18278-1:2015) |
| BS ISO 16338:2017 | Welding for aerospace applications. Resistance spot and seam welding |
| 11/30237996 DC : 0 | BS ISO 16338 - WELDING FOR AEROSPACE APPLICATIONS - RESISTANCE SPOT AND SEAM WELDING |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN ISO 18278-1:2015 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
| ONORM EN 1090-2 : 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN ISO 18278-3:2017 | Resistance welding. Weldability Evaluation procedures for weldability in spot weld bonding |
| I.S. EN ISO 18278-3:2017 | RESISTANCE WELDING - WELDABILITY - PART 3: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELD BONDING (ISO 18278-3:2017) |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ISO 18595:2007 | Resistance welding Spot welding of aluminium and aluminium alloys Weldability, welding and testing |
| ISO 18278-2:2016 | Resistance welding Weldability Part 2: Evaluation procedures for weldability in spot welding |
| UNE-EN ISO 18278-2:2016 | Resistance welding - Weldability - Part 2: Evaluation procedures for weldability in spot welding (ISO 18278-2:2016) |
| ISO 18278-1:2015 | Resistance welding Weldability Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials |
| BS EN ISO 18278-1:2015 | Resistance welding. Weldability General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials |
| EN ISO 18278-2:2016 | Resistance welding - Weldability - Part 2: Evaluation procedures for weldability in spot welding (ISO 18278-2:2016) |
| EN ISO 18278-1:2015 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ISO 18278-3:2017 | Resistance welding — Weldability — Part 3: Evaluation procedures for weldability in spot weld bonding |
| DIN EN ISO 18278-2:2016-09 | RESISTANCE WELDING - WELDABILITY - PART 2: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELDING (ISO 18278-2:2016) |
| DIN EN ISO 18595:2007-12 | Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing (ISO 18595:2007); German version EN ISO 18595:2007 |
| BS EN ISO 18595:2007 | Resistance welding. Spot welding of aluminium and aluminium alloys. Weldability, welding and testing |
| CEN ISO/TS 15011-5:2006 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials (ISO/TS 15011-5:2006) |
| ISO 5182:2016 | Resistance welding Materials for electrodes and ancillary equipment |
| ISO 14270:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds |
| ISO 10447:2015 | Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds |
| ISO 5830:1984 | Resistance spot welding Male electrode caps |
| ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 3573:2012 | Hot-rolled carbon steel sheet of commercial and drawing qualities |
| ISO 9364:2011 | Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities |
| ISO 4998:2014 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
| ISO 5002:2013 | Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities |
| ISO 15614-12:2014 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 12: Spot, seam and projection welding |
| ISO 669:2016 | Resistance welding Resistance welding equipment Mechanical and electrical requirements |
| ISO 14329:2003 | Resistance welding Destructive tests of welds Failure types and geometric measurements for resistance spot, seam and projection welds |
| ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
| ISO 3575:2016 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities |
| ISO 4950-2:1995 | High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition |
| ISO 4950-1:1995 | High yield strength flat steel products — Part 1: General requirements |
| ISO 5000:2011 | Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 5184:1979 | Straight resistance spot welding electrodes |
| ISO 17677-1:2009 | Resistance welding Vocabulary Part 1: Spot, projection and seam welding |
| ISO 18278-1:2015 | Resistance welding Weldability Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials |
| ISO 5821:2009 | Resistance welding — Spot welding electrode caps |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.