ISO 1436:2017
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
25-07-2017
Withdrawn date
09-04-2025
Superseded by
$122.50
Including GST where applicable
ISO 1436:2017 specifies requirements for six types of wire-braid-reinforced hose and hose assembly of nominal size from 5 to 51 plus, for one of the five types (type R2ATS), nominal size 63.
They are suitable for use with:
- oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperatures ranging from −40 °C to +100 °C;
- water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743‑4 at temperatures ranging from 0 °C to +60 °C;
- water at temperatures ranging from 0 °C to +60 °C.
ISO 1436:2017 does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies.
NOTE It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.
| Committee |
ISO/TC 45/SC 1
|
| DevelopmentNote |
Supersedes ISO 1436-1 and ISO 1436-2. (04/2009) Supersedes ISO/DIS 1436. (07/2017)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| IS 7651:2021 | Identical |
| NEN ISO 1436 : 2017 | Identical |
| BS ISO 1436:2017 | Identical |
| DIN 20022-1:1987-02 | Similar to |
| DIN 20022-4:1987-02 | Corresponds |
| DIN 20022-3:1987-02 | Corresponds |
| BS 3832:1981 | Identical |
| GOST ISO 1436 : 2013 | Identical |
| DIN 20022-2:1987-02 | Similar to |
| BS 3832:1991 | Identical |
| ANSI B93.100M : 1987 | HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - METHODS OF TEST |
| BS ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification |
| BS EN ISO 18752:2016 | Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification |
| BS ISO 18752 : 2014 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| ISO 12151-1:2010 | Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| DEFSTAN 47-32/2(2011) : 2011 | RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS |
| DEFSTAN 47-032/3(2017) : 2017 | RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS |
| BS ISO 12151-1 : 2010 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| SAE J2593_201502 | Information Report for the Installation of Fluid Conductors and Connectors |
| I.S. EN 62282-2:2012 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV)) |
| CEI EN 62282-2 : 2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| I.S. EN ISO 6806:2017 | RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
| ANSI B11 TR6 : 2010 | MACHINES - SAFETY CONTROL SYSTEM FOR MACHINE TOOLS |
| ISO/TS 17165-2:2018 | Hydraulic fluid power — Hose assemblies — Part 2: Practices for hydraulic hose assemblies |
| 15/30317645 DC : 0 | BS EN ISO 6806 - RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION |
| BS ISO 6605:2017 | Hydraulic fluid power. Test methods for hoses and hose assemblies |
| BS ISO 12151-3:2010 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners — Specification |
| SAE J517_201710 | Hydraulic Hose |
| I.S. EN ISO 18752:2016 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 18752:2014) |
| ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining — Wire-reinforced hydraulic types for coal mining — Specification |
| DIN EN ISO 6806:2015-08 (Draft) | RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
| 11/30242646 DC : DRAFT FEB 2011 | BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| BS EN ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners. Specification |
| IEC 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process — Part 2: Residential applications |
| 09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| BS EN 62282-2:2012 | Fuel cell technologies Fuel cell modules |
| EN ISO 18752:2016 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
| EN ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
| 16/30312462 DC : 0 | BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES |
| PD ISO/TS 17165-2:2013 | Hydraulic fluid power. Hose assemblies Practices for hydraulic hose assemblies |
| ISO 12151-3:2010 | Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| ISO 18752:2014 | Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification |
| DIN ISO 12151-3:2012-08 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010) |
| UNE-EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| UNE-EN ISO 18752:2017 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
| UNE-EN ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
| SAE J517_201612 | Hydraulic Hose |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| ISO 7233:2016 | Rubber and plastics hoses and hose assemblies — Determination of resistance to vacuum |
| ISO 7326:2016 | Rubber and plastics hoses — Assessment of ozone resistance under static conditions |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies — Vocabulary |
| ISO 10619-1:2011 | Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature |
| ISO 10619-2:2011 | Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures |
| ISO 4671:2007 | Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies — Hydrostatic testing |
| ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
| ISO 6803:2017 | Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing |
| ISO 8033:2016 | Rubber and plastics hoses — Determination of adhesion between components |
| ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) — Classification — Part 4: Family H (Hydraulic systems) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic — Determination of the effect of liquids |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.