ISO 13383-1:2012
Current
The latest, up-to-date edition.
Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural characterization — Part 1: Determination of grain size and size distribution
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
28-08-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 13383-1:2012 describes manual methods of making measurements for the determination of grain size of fine ceramics (advanced ceramics, advanced technical ceramics) using photomicrographs of polished and etched test pieces. The methods described in ISO 13383-1:2012 do not yield the true mean grain diameter, but a somewhat smaller parameter depending on the method applied to analyse a two-dimensional section. The relationship to true grain dimensions depends on the grain shape and the degree of microstructural anisotropy. ISO 13383-1:2012 contains two principal methods, A and B.
Method A is the mean linear intercept technique. Method A1 applies to single-phase ceramics, and to ceramics with a principal crystalline phase and a glassy grain-boundary phase of less than about 5 % by volume for which intercept counting suffices. Method A2 applies to ceramics with more than about 5 % by volume of pores or secondary phases, or ceramics with more than one major crystalline phase where individual intercept lengths are measured, which can optionally be used to create a size distribution. This latter method allows the pores or phases to be distinguished and the mean linear intercept size for each to be calculated separately.
Method B is the mean equivalent circle diameter method, which applies to any type of ceramic with or without a secondary phase. This method may also be employed for determining grain aspect ratio and a size distribution.
| DevelopmentNote |
Supersedes ISO/DIS 13383-1. (08/2012)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 13383-1 : 2016 | Identical |
| NBN EN ISO 13383-1 : 2016 | Identical |
| NEN EN ISO 13383-1 : 2016 | Identical |
| NS EN ISO 13383-1 : 2016 | Identical |
| I.S. EN ISO 13383-1:2016 | Identical |
| PN EN ISO 13383-1 : 2016 | Identical |
| UNI EN ISO 13383-1 : 2016 | Identical |
| UNE-EN ISO 13383-1:2016 | Identical |
| BS EN ISO 13383-1:2016 | Identical |
| EN ISO 13383-1:2016 | Identical |
| SN EN ISO 13383-1:2016 | Identical |
| DIN EN ISO 13383-1:2015-10 (Draft) | Identical |
| BS ISO 13383-1 : 2012 | Identical |
| DIN EN ISO 13383-1 E : 2016 | Identical |
| 16/30332223 DC : 0 | BS ISO 6474-1 - IMPLANTS FOR SURGERY - CERAMIC MATERIALS - PART 1: CERAMIC MATERIALS BASED ON HIGH PURITY ALUMINA |
| 14/30276373 DC : 0 | BS EN ISO 13356 - IMPLANTS FOR SURGERY - CERAMIC MATERIALS BASED ON YTTRIASTABILIZED TETRAGONAL ZIRCONIA (Y-TZP) |
| BS ISO 13175-3:2012 | Implants for surgery. Calcium phosphates Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
| I.S. EN ISO 13356:2015 | IMPLANTS FOR SURGERY - CERAMIC MATERIALS BASED ON YTTRIA-STABILIZED TETRAGONAL ZIRCONIA (Y-TZP) (ISO 13356:2015) |
| ISO 18550:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Testing method for macro-heterogeneity in microstructure |
| DIN EN ISO 13356:2016-02 | IMPLANTS FOR SURGERY - CERAMIC MATERIALS BASED ON YTTRIA-STABILIZED TETRAGONAL ZIRCONIA (Y-TZP) (ISO 13356:2015) |
| BS EN ISO 13356:2015 | Implants for surgery. Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
| 11/30219230 DC : 0 | BS ISO 13175-3 - IMPLANTS FOR SURGERY - CALCIUM PHOSPHATES - PART 3: HYDROXYAPATITE AND BETA-TRICALCIUM PHOSPHATE BONE SUBSTITUTES |
| 17/30361518 DC : 0 | BS ISO 6474-2 - IMPLANTS FOR SURGERY - CERAMIC MATERIALS - PART 2: COMPOSITE MATERIALS BASED ON A HIGH-PURITY ALUMINA MATRIX WITH ZIRCONIA REINFORCEMENT |
| 17/30337243 DC : DRAFT SEP 2017 | BS ISO 21113 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMIC THIN PLATES AT ROOM TEMPERATURE |
| BS ISO 18550:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Testing method for macroheterogeneity in microstructure |
| ISO 13356:2015 | Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
| EN ISO 13356:2015 | Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO 13356:2015) |
| 15/30277742 DC : DRAFT MAY 2015 | BS ISO 18550 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TESTING METHOD FOR MACROHETEROGENEITY IN MICROSTRUCTURE |
| ISO 13175-3:2012 | Implants for surgery — Calcium phosphates — Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 6106:2013 | Abrasive products — Checking the grain size of superabrasives |
| EN 1006:2009 | Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties |
| ASTM E 930 : 1999 | Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.