ISO 13137:2013
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
31-08-2022
Superseded by
Language(s)
French, English
Published date
16-10-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 13137:2013 specifies performance requirements for battery powered pumps used for personal sampling of chemical and biological agents in workplace air. It also specifies test methods in order to determine the performance characteristics of such pumps under prescribed laboratory conditions.
ISO 13137:2013 is applicable to battery powered pumps having a nominal volume flow rate above 10 ml ⋅ min−1, as used with combinations of sampler and collection substrate for sampling of gases, vapours, dusts, fumes, mists and fibres.
ISO 13137:2013 is primarily intended for flow-controlled pumps.
| DevelopmentNote |
Supersedes ISO/DIS 13137. (10/2013)
|
| DocumentType |
Standard
|
| Pages |
33
|
| ProductNote |
THIS STANDARD ALSO REFERES TO: EN 482
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| DS EN ISO 13137 : 2013 | Identical |
| ONORM EN ISO 13137 : 2014 | Identical |
| NF EN ISO 13137 : 2013 | Identical |
| NBN EN ISO 13137 : 2013 | Identical |
| NEN EN ISO 13137 : 2013 | Identical |
| NS EN ISO 13137 : 2013 | Identical |
| I.S. EN ISO 13137:2013 | Identical |
| PN EN ISO 13137 : 2014 | Identical |
| SN EN ISO 13137:2013 | Identical |
| UNI EN ISO 13137 : 2015 | Identical |
| SS-EN ISO 13137:2013 | Identical |
| UNE-EN ISO 13137:2014 | Identical |
| BS EN ISO 13137:2013 | Identical |
| EN ISO 13137:2013 | Identical |
| DIN EN ISO 13137:2014-03 | Identical |
| BS EN 15051-3:2013 | Workplace exposure. Measurement of the dustiness of bulk materials Continuous drop method |
| BS EN 13205-1:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations General requirements |
| ASTM D 4532 : 2015 : REDLINE | Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers |
| I.S. EN 13205-4:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST BASED ON COMPARISON OF CONCENTRATIONS |
| S.R. CEN/TR 17055:2017 | WORKPLACE EXPOSURE - MEASUREMENT OF CHEMICAL AGENTS COMPLYING WITH THE REQUIREMENTS GIVEN IN EN 482 AND EITHER ONE OF EN 838, EN 1076, EN 13205, EN 13890 AND EN 13936 - CHOICE OF PROCEDURES |
| 18/30353364 DC : 0 | BS EN 17199-3 - WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 3: CONTINUOUS DROP METHOD |
| 17/30362165 DC : 0 | BS EN 16402 - PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| ASTM D 1356 : 2017 : REDLINE | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| EN 13205-1:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements |
| EN 13205-4:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations |
| UNI EN 13205-2 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| 13/30231417 DC : 0 | BS ISO 16258-2 - WORKPLACE AIR - RESPIRABLE CRYSTALLINE SILICA BY X-RAY DIFFRACTION - PART 2: METHOD BY INDIRECT ANALYSIS |
| BS EN 16516:2017 | Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air |
| BS ISO 18158:2016 | Workplace air. Terminology |
| UNE-EN 13936:2014 | Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods |
| BS ISO 16258-2:2015 | Workplace air. Analysis of respirable crystalline silica by X-ray diffraction Method by indirect analysis |
| BS EN 13205-4:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations Laboratory performance test based on comparison of concentrations |
| 14/30254778 DC : 0 | BS EN ISO 17621 - WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS |
| UNE 81599:2014 | Workplace exposure. Determination of airborne particles (inhalable, thoracic and respirable fractions). Gravimetric method. |
| DIN EN 13205-2:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| DIN EN 13205-4 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST BASED ON COMPARISON OF CONCENTRATIONS |
| ONORM EN 482 : 2015 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| ISO 18158:2016 | Workplace air Terminology |
| ISO 16258-1:2015 | Workplace air Analysis of respirable crystalline silica by X-ray diffraction Part 1: Direct-on-filter method |
| UNI EN 13936 : 2014 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING A CHEMICAL AGENT PRESENT AS A MIXTURE OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
| ASTM D 7948 : 2014 : EDT 1 | Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry |
| ASTM D 7948 : 2014 | Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry |
| I.S. EN 13205-2:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| UNE-EN 15051-3:2014 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 3: Continuous drop method |
| I.S. EN 482:2012 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| BS ISO 16258-1:2015 | Workplace air. Analysis of respirable crystalline silica by X-ray diffraction Direct-on-filter method |
| BS EN 13936:2014 | Workplace exposure. Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour. Requirements and test methods |
| BS ISO 17734-2:2013 | Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives |
| ISO 20581:2016 | Workplace air General requirements for the performance of procedures for the measurement of chemical agents |
| BS ISO 20581:2016 | Workplace air. General requirements for the performance of procedures for the measurement of chemical agents |
| 16/30288734 DC : 0 | BS ISO 19087 - WORKPLACE AIR - ANALYSIS OF RESPIRABLE CRYSTALLINE SILICA BY FOURIER-TRANSFORM INFRARED SPECTROSCOPY |
| 14/30296739 DC : 0 | BS EN 482:2012/A1 - WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| BS ISO 17734-1:2013 | Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry Isocyanates using dibutylamine derivatives |
| BS EN 13205-2:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations Laboratory performance test based on determination of sampling efficiency |
| UNE-EN ISO 17621:2016 | Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015) |
| BS ISO 8672:2014 | Air quality. Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy. Membrane filter method |
| DIN EN 15051-3:2014-03 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 3: CONTINUOUS DROP METHOD |
| DIN EN ISO 17621:2015-12 | WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015) |
| DIN EN 13205-1:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 17621:2015 | WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015) |
| PREN 17199-3 : DRAFT 2017 | WORKPLACE EXPOSURE - MEASUREMENT OF DUSTINESS OF BULK MATERIALS THAT CONTAIN OR RELEASE NANO-OBJECTS OR SUBMICROMETER PARTICLES - PART 3: CONTINUOUS DROP METHOD |
| DIN EN 482:2015-12 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents (includes Amendment A1:2015) |
| EN 16516:2017 | Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air |
| UNI EN 15051-3 : 2014 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 3: CONTINUOUS DROP METHOD |
| UNE-EN 13205-2:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency |
| 15/30269207 DC : 0 | BS ISO 18158 - WORKPLACE AIR - TERMINOLOGY |
| 15/30322088 DC : 0 | BS EN 16516 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| PD CEN/TR 17055:2017 | Workplace exposure. Measurement of chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN 13890 and EN 13936. Choice of procedures |
| BS EN ISO 17621:2015 | Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods |
| UNI EN 13205-1 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| 15/30326686 DC : 0 | BS ISO 20581 - WORKPLACE AIR - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| DIN EN 13205-1 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| ISO 17734-1:2013 | Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry — Part 1: Isocyanates using dibutylamine derivatives |
| I.S. EN 13936:2014 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING A CHEMICAL AGENT PRESENT AS A MIXTURE OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16516:2017 | CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| ISO 16258-2:2015 | Workplace air Analysis of respirable crystalline silica by X-ray diffraction Part 2: Method by indirect analysis |
| BS EN 482 : 2012 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| UNE-EN 482:2012 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
| ISO 17621:2015 | Workplace atmospheres Short term detector tube measurement systems Requirements and test methods |
| EN 13936:2014 | Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods |
| EN 15051-3:2013 | Workplace exposure - Measurement of the dustiness of bulk materials - Part 3: Continuous drop method |
| DIN EN 13936:2014-04 | Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods |
| DIN EN 13205-2 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 2: LABORATORY PERFORMANCE TEST BASED ON DETERMINATION OF SAMPLING EFFICIENCY |
| UNE-EN 13205-4:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations |
| ISO 17734-2:2013 | Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry — Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives |
| I.S. EN 13205-1:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 13205-1:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements |
| DIN EN 13205-4:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST BASED ON COMPARISON OF CONCENTRATIONS |
| UNI EN 13205-4 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 4: LABORATORY PERFORMANCE TEST BASED ON COMPARISON OF CONCENTRATIONS |
| 18/30346454 DC : 0 | BS ISO 21832 - WORKPLACE AIR - PROCEDURES FOR DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICLES |
| I.S. EN 15051-3:2013 | WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 3: CONTINUOUS DROP METHOD |
| ASTM D 6785 : 2013 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ISO 8672:2014 | Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy — Membrane filter method |
| EN 482:2012+A1:2015 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
| EN ISO 17621:2015 | Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015) |
| CEN/TR 17055:2017 | Workplace exposure - Measurement of chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN 13890 and EN 13936 - Choice of procedures |
| EN 13205-2:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency |
| EN 482:2012+A1:2015 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| EN 1540:2011 | Workplace exposure - Terminology |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.