ISO 12643-1:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
30-11-2023
Superseded by
Language(s)
English
Published date
07-12-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 12643-1:2009 provides safety specifications for the design and construction of new equipment used in prepress systems, printing press systems, binding and finishing systems, converting systems and stand‑alone platen presses. It is applicable to equipment used in a stand-alone mode, or in combination with other machines, including ancillary equipment, in which all the machine actuators (e.g. drives) of the equipment are controlled by the same control system.
The requirements given in ISO 12643-1:2009 are applicable to the equipment covered by all parts of ISO 12643, unless otherwise noted. ISO 12643-1:2009 is intended to be used in conjunction with the applicable part of ISO 12643 that contains additional requirements specific to a particular type of equipment.
ISO 12643-1:2009 addresses recognized significant hazards specific to equipment and systems in the following areas:
- mechanical;
- electrical;
- slipping, tripping, falling;
- ergonomics;
- noise;
- UV and laser radiation;
- fire and explosion;
- thermal;
- other types of emissions [e.g. ozone, ink mist, volatile organic compounds (VOCs), etc.].
The safety principles established in ISO 12643-1:2009 can also be applicable to the design of equipment within areas of technology that are not specified in ISO 12643.
| Committee |
ISO/TC 130
|
| DevelopmentNote |
Together with ISO 12643-2, supersedes ISO 12648. (03/2007) Together with ISO 12643-3, supersedes ISO 12649. (03/2008) DRAFT ISO/DIS 12643-1 has been withdrawn by the publisher. (07/2015)
|
| DocumentType |
Standard
|
| Pages |
81
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| BS ISO 12643-1:2009 | Identical |
| BIS IS/ISO 12643-1 : 2009 | Identical |
| NEN ISO 12643-1 : 2010 | Identical |
| BS ISO 12643-3:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Binding and finishing equipment and systems |
| BS ISO 12643-4:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Converting equipment and systems |
| ISO 12643-4:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 4: Converting equipment and systems |
| 09/30201361 DC : 0 | BS ISO 12643-2 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 2: PRESS EQUIPMENT AND SYSTEMS |
| 09/30201364 DC : 0 | BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| BS ISO 12643-5:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Stand-alone platen presses |
| BS ISO 12643-2:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Prepress and press equipment and systems |
| ISO 12643-2:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems |
| BIS IS/ISO 12643-2 : 2010 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 2: PREPRESS AND PRESS EQUIPMENT AND SYSTEMS |
| BIS IS/ISO 12643-4 : 2010 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 4: CONVERTING EQUIPMENT AND SYSTEMS |
| BIS IS/ISO 12643-5 : 2010 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 5: STAND-ALONE PLATEN PRESSES |
| BIS IS/ISO 12643-3 : 2010 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| 14/30279065 DC : 0 | BS EN ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| 09/30203783 DC : DRAFT NOV 2009 | BS ISO 12643-5 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 5: STAND-ALONE PLATEN PRESSES |
| ISO 12643-3:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems |
| ISO 12643-5:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 5: Stand-alone platen presses |
| 14/30279071 DC : 0 | BS EN ISO 12643-4 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 4: CONVERTING EQUIPMENT AND SYSTEMS |
| 08/30190508 DC : 0 | BS ISO 12643-4 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 4: CONVERTING EQUIPMENT AND SYSTEMS |
| ISO 13855:2010 | Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
| NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| EN 746-1:1997+A1:2009 | Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
| EN 1010-2:2006+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| ISO 12643-5:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 5: Stand-alone platen presses |
| NFPA 329 : 2015 | HANDLING RELEASES OF FLAMMABLE AND COMBUSTIBLE LIQUIDS AND GASES |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| ANSI B65.1 : 2011 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| ISO 3864-2:2016 | Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
| EN 378-1:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria |
| ISO 12643-4:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 4: Converting equipment and systems |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| NFPA 79 : 2015 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
| ISO 9355-1:1999 | Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
| ISO 11689:1996 | Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment |
| ISO 12643-3:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems |
| IEC 61310-3:2007 | Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
| IEC 60204-11:2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| ISO 13851:2002 | Safety of machinery Two-hand control devices Functional aspects and design principles |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| ASME B20.1 : 2015 | SAFETY STANDARD FOR CONVEYORS AND RELATED EQUIPMENT |
| ISO/TS 13732-2:2001 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature |
| ISO 14123-1:2015 | Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers |
| ISO/TR 15847:2008 | Graphic technology Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| ANSI B65.2 : 2011 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 2: PREPRESS AND PRESS EQUIPMENT AND SYSTEMS |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
| IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| ANSI B65.4 : 2002(R2007) | SAFETY STANDARD - THREE-KNIFE TRIMMERS, INCLUDING ROTARY, AND SINGLE- AND MULTIPLE-KNIFE TRIMMERS |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| NFPA 68 : 2013 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
| IEC 61491:2002 | Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives |
| EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
| IEC 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
| ISO 15534-3:2000 | Ergonomic design for the safety of machinery — Part 3: Anthropometric data |
| EN 12753:2005+A1:2010 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
| NFPA 86 : 2015 | OVENS AND FURNACES |
| EN 1010-3:2002+A1:2009 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 61000-6-4:2007/A1:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| EN 13023:2003+A1:2010 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| EN 1010-4:2004+A1:2009 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| ANSI B65.5 : 2011 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 5: STAND ALONE |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| ISO 13854:2017 | Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
| ISO 13856-1:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
| EN 12198-1:2000+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 15534-1:2000 | Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery |
| NFPA 77 : 2014 | STATIC ELECTRICITY |
| ISO 3864-3:2012 | Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| ANSI B65.3 : 2011 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| EN 1760-3:2004+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| ISO 11228-1:2003 | Ergonomics Manual handling Part 1: Lifting and carrying |
| ISO 12643-2:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO 15534-2:2000 | Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings |
| ISO 9355-2:1999 | Ergonomic requirements for the design of displays and control actuators — Part 2: Displays |
| IEC 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
| ISO 8031:2009 | Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
| ISO 14123-2:2015 | Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 2: Methodology leading to verification procedures |
| ISO 11553-1:2005 | Safety of machinery Laser processing machines Part 1: General safety requirements |
| ANSI/ASSE Z244.1 : 2016 | THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.